Peter Schumacher

151 - 200 out of 264Page size: 50

Publications / Theses

  1. 2012
  2. Published

    Änderung der Warmrissneigung bei AlS7MgCu Legierungen in Abhängigkeit vom Kupfer- und Magnesiumgehalt

    Pabel, T., Bozorgi, S., Kneißl, C., Faerber, K. & Schumacher, P., 2012, In: Metall. p. 336-341

    Research output: Contribution to journal › Article › Research › peer-review

  3. Published

    Az AlSi7MgCu ötvözetek melegrepedési hajlama és az ötvözöelemek (magnézium és réz) hatásai

    Pabel, T., Bozorgi, S., Kneißl, C., Faerber, K. & Schumacher, P., 2012, In: Bányászati és kohászati lapok = Zurnal gornogo dela i metallurgija = Zeitschrift für Berg- und Hüttenwesen / Kohászat = Metallurgija = Hüttenwesen. 145, 5, p. 19-24

    Research output: Contribution to journal › Article › Research › peer-review

  4. Published

    Bildanalytische Methode zur Charakterisierung des Veredelungsgrades von Aluminium-Silizium Gusslegierungen

    Heugenhauser, S., Stauder, B., Djurdjevic, M. & Schumacher, P., 2012, Fortschritte in der Metallographie : Sonderbände der praktischen Metallographie. Frankfurt: DGM, Vol. 44. p. 231-237 6 p. (Sonderbände der praktischen Metallographie; vol. 44).

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research

  5. Published

    Charakterisierung der Heissrissempfindlichkeit von Aluminium-Gusslegierungen

    Staggl, S., Pabel, T., Bozorgi, S., Faerber, K., Kneißl, C. & Schumacher, P., 2012, In: Gießerei-Praxis (Giessereipraxis). p. 192-196

    Research output: Contribution to journal › Article › Research › peer-review

  6. Published

    Effect of alloying Elements on hot cracking suscetibility of AlSi7MgCu-alloys

    Pabel, T., Bozorgi, S., Kneißl, C., Faerber, K. & Schumacher, P., 2012, In: International foundry research (Giessereiforschung ; official journal of World Foundrymen Organization). p. 29-34

    Research output: Contribution to journal › Article › Research › peer-review

  7. Published

    Effect of SiC reinforcement particles on the grain density in a magnesium-based metal-matrix composite: Modelling and experiment

    Lelito, J., Pawel L., Z., Shirzadi, A. A., Greer, A. L., Krajewski, W. K., Suchy, J. S., Faerber, K. & Schumacher, P., 2012, In: Acta materialia. 60, p. 2950-2958

    Research output: Contribution to journal › Article › Research › peer-review

  8. Published

    Effect of Y addition and cooling rate on refinement of eutectic Si in Al–5 wt-%Si alloys

    Li, J. & Schumacher, P., 2012, In: International journal of cast metals research. 25, p. 347-357

    Research output: Contribution to journal › Article › Research › peer-review

  9. Published

    Einfluss der Legierungselemente auf die Heißrissbildung bei AlSi7MgCu-Gusslegierungen

    Pabel, T., Bozorgi, S., Kneißl, C., Faerber, K. & Schumacher, P., 2012, In: Gießerei. 99, p. 30-37

    Research output: Contribution to journal › Article › Research › peer-review

  10. Published

    Ermittlung der Wärmebehandlungsparameter für eine AlMgSi-Gusslegierung

    Petkov, T., Künstner, D., Pabel, T., Faerber, K., Kneißl, C. & Schumacher, P., 2012, In: Gießerei. 99, p. 26-37

    Research output: Contribution to journal › Article › Research › peer-review

  11. Published

    Hot cracking susceptibility of AlSi7MgCu-Alloys and the effects of alloying elements (Magnesium and Copper)

    Pabel, T., Bozorgi, S., Kneißl, C., Faerber, K. & Schumacher, P., 2012, In: Revista de turnătorie : RT ; publicaţie a Asociaţiei Tehnice de Turnătorie din România . 9-10

    Research output: Contribution to journal › Article › Research › peer-review

  12. Published

    Improved properties of aluminium cast parts through the use of inorganic cores

    Pabel, T., Kneißl, C., Schumacher, P., Brotzki, J. & Müller, J., 2012, In: Foundry trade journal international. 186, 3696, p. 257-261

    Research output: Contribution to journal › Article › Research › peer-review

  13. Published

    Improvement of the resistance of titanium aluminides to environmental embrittlement

    Masset, P. J., Bleicher, F., Bortolotto, L., Geiger, G., Kolitsch, A., Langlade, C., Paul, J., Pelic, B., Pyczak, F., Rafaja, D., Schumacher, P., Schütze, M., Wolf, G. & Yankov, R. A., 2012, In: ECS transactions. 50, 44, p. 127-141 15 p.

    Research output: Contribution to journal › Article › Research › peer-review

  14. Published

    Influence of impurity elements on the nucleation and growth of Si in high purity melt-spun Al–Si-based alloys

    Li, J., Zarif, M. Z., Dehm, G. & Schumacher, P., 2012, In: Philosophical magazine. 92, p. 3789-3805

    Research output: Contribution to journal › Article › Research › peer-review

  15. Published

    Optimierung der Wärmebehandlung einer AlMgSi-Gusslegierung

    Petkov, T., Künstner, D., Pabel, T., Faerber, K., Kneißl, C. & Schumacher, P., 2012, In: Gießerei-Rundschau. 58, p. 194-200

    Research output: Contribution to journal › Article › Research › peer-review

  16. Published

    Optimierung der Wärmebehandlung einer AlMgSi-Gusslegierung

    Petkov, T., Künstner, D., Pabel, T., Faerber, K., Kneißl, C. & Schumacher, P., 2012, In: Gießerei-Praxis (Giessereipraxis). p. 268-274

    Research output: Contribution to journal › Article › Research › peer-review

  17. Published

    Phase Selection in 6082 Al-Mg-Si Alloys

    Wimmer, A. C., Li, J. & Schumacher, P., 2012, In: Berg- und hüttenmännische Monatshefte : BHM. p. 301-305

    Research output: Contribution to journal › Article › Research › peer-review

  18. Published

    Simulation of distortion and residual stress in high pressure die casting - modelling and experiments

    Hofer, P., Kaschnitz, E. & Schumacher, P., 2012, In: Materials science and engineering: A, Structural materials: properties, microstructure and processing. 33, p. 1-8

    Research output: Contribution to journal › Article › Research › peer-review

  19. Published

    Susceptibilitatea fisurării la cald a aliajelor AlSi7MgCu şi influenţa elementelor de aliere (Magneziu şi Cupru)

    Pabel, T., Bozorgi, S., Kneißl, C., Faerber, K. & Schumacher, P., 2012, In: Revista de turnătorie : RT ; publicaţie a Asociaţiei Tehnice de Turnătorie din România . 9-10, p. 2-11

    Research output: Contribution to journal › Article › Research › peer-review

  20. Published

    Untersuchungsmethoden zur Charakterisierung der Heißrissempfindlichkeit von Aluminium-Gusslegierungen

    Staggl, S., Bozorgi, S., Pabel, T., Faerber, K., Kneißl, C. & Schumacher, P., 2012, In: Gießerei-Rundschau. p. 137-143

    Research output: Contribution to journal › Article › Research › peer-review

  21. Published

    Werkstoff- und fertigungstechnische Grundlagen der Herstellung und Anwendung von hoch siliciumhaltigem Gusseisen mit Kugelgraphit

    Gassner, G., Bauer, W., Schumacher, P., Löblich, H. & Stets, W., 2012, In: Gießerei. p. 20-23

    Research output: Contribution to journal › Article › Research › peer-review

  22. 2011
  23. Published

    Änderung der Warmrissneigung bei AlSi7MgCu-Legierungen in Abhängigkeit vom Kupfer- und Magnesiumgehalt

    Pabel, T., Bozorgi, S., Kneißl, C., Haberl, K. & Schumacher, P., 2011, In: International aluminium journal. 3, p. 61-65

    Research output: Contribution to journal › Article › Research › peer-review

  24. Published

    Bestimmung technologischer Eigenschaften von Al-Legierungen – Einsatz eines neu entwickelten Kokillensets im Niederdruckkokillengießverfahren

    Kneißl, C., Pabel, T., Dambauer, G. & Schumacher, P., 2011, In: Gießerei. p. 22-28

    Research output: Contribution to journal › Article › Research › peer-review

  25. Published

    Correlation of porosity detected by computed tomography and fatigue strength of aluminium alloys

    Pabel, T., Geier, G., Habe, D., Rosc, J., Petkov, T. & Schumacher, P., 2011.

    Research output: Contribution to conference › Poster › Research › peer-review

  26. Published

    Correlation of porosity detected by computed tomography and fatigue strength of aluminium alloys

    Pabel, T., Geier, G., Habe, D., Rosc, J., Schumacher, P. & Petkov, T., 2011, TMS Conference-Supplemental Proceedings, General Paper Selections. p. 803-805

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  27. Published

    Correlation of porosity detected by computed tomography and fatigue strength of aluminium alloys

    Pabel, T., Geier, G., Habe, D., Rosc, J., Schumacher, P. & Petkov, T., 2011.

    Research output: Contribution to conference › Poster › Research › peer-review

  28. Published

    Deutliche Einsparungen bei der Wärmebehandlung von untereutektischen Aluminium-Silizium Legierungen durch modifizierte Parameter

    Dambauer, G., Pabel, T., Kneißl, C. & Schumacher, P., 2011, In: Metall. p. 24-30

    Research output: Contribution to journal › Article › Research › peer-review

  29. Published

    EFFECT OF ALLOYING ELEMENTS (MAGNESIUM AND COPPER) ON HOT CRACKING SUSCEPTIBILITY OF AlSi7MgCu-ALLOYS

    Bozorgi, S., Haberl, K., Kneißl, C., Pabel, T. & Schumacher, P., 2011, Shape Casting: The 4th International Symposium. p. 113-120

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  30. Published

    Einfluss des Kupfer- und Magnesiumgehaltes auf die Warmrissempfindlichkeit von AlSi7MgCu-Gusslegierungen

    Pabel, T., Bozorgi, S., Kneißl, C., Haberl, K. & Schumacher, P., 2011, In: Gießerei-Rundschau. 58, p. 50-56

    Research output: Contribution to journal › Article › Research › peer-review

  31. Published

    Einfluss von Kupfer- und Magnesiumgehalt auf die Warmrissempfindlichkeit von AlSi7MgCu-Legierungen

    Pabel, T., Bozorgi, S., Kneißl, C., Haberl, K. & Schumacher, P., 2011.

    Research output: Contribution to conference › Poster › Research › peer-review

  32. Published

    Einfluss von Kupfer- und Magnesiumgehalt auf die Warmrissneigung bei AlSi7MgCu-Legierungen

    Pabel, T., Bozorgi, S., Kneißl, C., Haberl, K. & Schumacher, P., 2011.

    Research output: Contribution to conference › Poster › Research › peer-review

  33. Published

    Evaluation of a mixed columnar-equiaxed solidification model with laboratory castings

    Wu, M., Nunner, G., Ludwig, A., Li, J. & Schumacher, P., 2011, IOP Conf. Series: Mater. Sci. Eng., vol. 27. p. 1-7

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  34. Published

    Improved properties of aluminium cast parts through the use of inorganic cores

    Pabel, T., Kneißl, C., Schumacher, P., Brotzki, J. & Müller, J., 2011, In: International foundry research (Giessereiforschung ; official journal of World Foundrymen Organization). p. 10-16

    Research output: Contribution to journal › Article › Research › peer-review

  35. Published

    Influence of SiC particles size and undercooling on AZ91 based composite heterogeneous nucleation model parameters

    Zak, P. L., Lelito, J., Suchy, J. S., Krajewski, W. K., Haberl, K. & Schumacher, P., 2011, In: World journal of engineering. 8, 3, p. 269-274

    Research output: Contribution to journal › Article › Research › peer-review

  36. Published

    Methoden und Ergebnisse zur Optimierung der Wärmebehandlung von aushärtbaren Aluminium-Gusslegierungen

    Pabel, T., Dambauer, G., Geier, G. F., Rockenschaub, H., Gschwandtner, R. & Schumacher, P., 2011, In: Berg- und hüttenmännische Monatshefte : BHM. p. 269-274

    Research output: Contribution to journal › Article › Research › peer-review

  37. Published

    PRECIPITATION PROCESS IN Mg-Nd-Zn-Zr-Gd/Y ALLOY

    Li, J., Sha, G., Schumacher, P. & Ringer, S., 2011, Magnesium Technology 2011. p. 255-259

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  38. Published

    Simulation von Verzug und Eigenspannung im Druckguss

    Hofer, P., Kaschnitz, E. & Schumacher, P., 2011, In: Gießerei. 98, p. 16-21

    Research output: Contribution to journal › Article › Research › peer-review

  39. Published

    Solidification and age hardening behaviour of Mg-Zn-Gd Alloys

    Li, J. & Schumacher, P., 2011, IOP Conf. Series: Materials Science and Engineering. p. 012021-012027

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  40. Published

    Study of Heterogeneous Nucleation of Eutectic Si in High-Purity Al-Si Alloys with Sr Addition

    Zarif, M. Z., McKay, B. & Schumacher, P., 2011, In: Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science. 42A, p. 1684-1691

    Research output: Contribution to journal › Article › Research › peer-review

  41. Published

    Wärmebehandlung von untereutektischen Aluminium-Silicium-Legierungen

    Dambauer, G., Pabel, T., Schumacher, P. & Kneißl, C., 2011, In: Gießerei. p. 26-33

    Research output: Contribution to journal › Article › Research › peer-review

  42. Published

    Warmrisse in Aluminium-Gusslegierungen

    Pabel, T., Staggl, S., Faerber, K., Bozorgi, S. & Schumacher, P., 2011, Tagungsband. p. 1-2

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  43. Published

    Warmrissempfindlichkeit von Aluminium-Gusslegierungen

    Staggl, S., Bozorgi, S., Haberl, K., Pabel, T., Kneißl, C. & Schumacher, P., 2011, Internations Student´s Day of Metallurgy 2011. p. 178-186

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  44. Published

    Warmrissneigung bei Aluminiumgusslegierungen in Abhängigkeit der Legierungszusammensetzung

    Pabel, T., Bozorgi, S., Kneißl, C., Haberl, K. & Schumacher, P., 2011, In: Berg- und hüttenmännische Monatshefte : BHM. p. 261-268

    Research output: Contribution to journal › Article › Research › peer-review

  45. 2010
  46. Published

    Analysis and Exploration of CT-Data using application specific Multi-Dimensional Transfer Functions

    Geier, G., Fritz, L., Hadwiger, M., Rosc, J., Pabel, T., Habe, D., Pittino, G. & Schumacher, P., 2010, Analysis and Exploration of CT-Data using application specific Multi-Dimensional Transfer Functions. p. 1-13

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  47. Published

    Charakterisierung der Schmelzequalität einer AlSi7Mg0,5(Cu,Fe)-Legierung (Typ LM25)

    Haberl, K., Schumacher, P., Geier, G. F. & Stauder, B., 2010, In: Gießerei-Rundschau. 58, 7/8, p. 131-136

    Research output: Contribution to journal › Article › Research › peer-review

  48. Published

    Computertomographie

    Wenzl, B., Schumacher, P. & Geier, G., 2010.

    Research output: Contribution to conference › Poster › Research › peer-review

  49. Published

    Correlation of Porosity Detected by Computed Tomography and Fatigue Strength of aluminium Alloys

    Pabel, T., Geier, G., Habe, D., Rosc, J., Petkov, T. & Schumacher, P., 2010.

    Research output: Contribution to conference › Poster › Research › peer-review

  50. Published

    Correlation of Porosity Detected by Computed Tomography and Fatigue Strength of Aluminium Alloys

    Pabel, T., Geier, G., Habe, D., Rosc, J., Schumacher, P. & Petkov, T., 2010, Correlation of Porosity Detected by Computed Tomography and Fatigue Strength of Aluminium Alloys. p. 1-2

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  51. Published

    Development of environmentally friendly cast alloys and composites, high zinc Al-base cast alloys

    Krajewski, W., Buras, J., Haberl, K. & Schumacher, P., 2010, In: Archives of Foundry Engineering (AFE ; quarterly). Volume 10, p. 431-434

    Research output: Contribution to journal › Article › Research › peer-review

  52. Published

    Development of environmentally friendly cast alloys. High-zinc Al alloys

    Krajewski, W. K., Buras, J., Zurakowski, M., Greer, A. L., Mancheva, M. N., Haberl, K. & Schumacher, P., 2010, In: Archives of Materials Science and Engineering. Volume 45, p. 120-124

    Research output: Contribution to journal › Article › Research › peer-review

  53. Published

    Einfluss von Kupfer- und Magnesiumgehalt auf die Warmrissneigung bei AlSi7MgCu-Legierungen

    Pabel, T., Bozorgi, S., Kneißl, C., Haberl, K. & Schumacher, P., 2010, In: Gießerei-Praxis (Giessereipraxis). p. 388-394

    Research output: Contribution to journal › Article › Research › peer-review

Previous 1 2 3 4 5 6 Next
View graph of relations

Latest Research Output

View more (264)