Peter Schumacher

101 - 150 out of 264Page size: 50

Publications / Theses

  1. 2014
  2. Published

    Preliminary Investigation on the Grain Refinement Behavior of ZrB2 Particles in Mg-Al Alloys

    Klösch, G., McKay, B. & Schumacher, P., 3 Mar 2014, Essential Readings in Magnesium Technology. Wiley-Blackwell, Vol. 9781118858943. p. 255-261 7 p.

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research

  3. Published

    Influence of dendritic morphology on the calculation of macrosegregation in steel ingot

    Li, J., Wu, M. H., Ludwig, A., Kharicha, A. & Schumacher, P., 1 Jan 2014, Solidification and Gravity VI. p. 121-126 6 p. (Materials Science Forum; vol. 790-791).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  4. Published

    A numerical study of the influence of pouring technique on the as-cast structure of Al-Cu ingots

    Ahmadein, M., Wu, M., Schumacher, P. & Ludwig, A., 2014, In: Materials Science Forum. p. 67-72

    Research output: Contribution to journal › Article › Research › peer-review

  5. Published

    Atomic observation on the solute adsorption and entrainment during Si growth in Al-Si based alloys

    Li, J., Albu, M., Hofer, F. & Schumacher, P., 2014, Fortschritte in der Metallographie . Werkstoff-Informationsges., p. 379-384 (Sonderbände der praktischen Metallographie; vol. 46).

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research

  6. Published

    Aus dem Österreichischen Gießerei-Institut des Vereins für praktische Gießereiforschung in Leoben

    Schumacher, P., 2014, In: Gießerei-Rundschau. 61, 9/10, p. 321-327

    Research output: Contribution to journal › Article › Research › peer-review

  7. Published

    Determination of Cleanliness different special steels Comparison of different Methods

    Schützenhöfer, W., Tazreiter, A., Plank, B. & Schumacher, P., 2014, iCT2014.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  8. Published

    Distortion and Residual Stress in High-Pressure Die Castings: Simulation and Measurements

    Hofer, P., Kaschnitz, E. & Schumacher, P., 2014, In: JOM. p. 1638-1646

    Research output: Contribution to journal › Article › Research › peer-review

  9. Published

    Impurity effects on the nucleation and growth of primary Al3(Sc,Zr) phase in Al alloys

    Li, J., Oberdorfer, B., Wurster, S. & Schumacher, P., 2014, In: Journal of materials science. 49, p. 5961-5977

    Research output: Contribution to journal › Article › Research › peer-review

  10. Published

    Influence of dendritic morphology on the calculation of macrosegregation in steel ingot

    Li, J., Wu, M., Ludwig, A., Kharicha, A. & Schumacher, P., 2014, Materials Science Forum Vols. 790-791. p. 121-126

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  11. Published

    Intermetallic phase selection during homogenisation for AA6082 alloy

    Li, J., Wimmer, A. C., Dehm, G. & Schumacher, P., 2014, In: Philosophical magazine. p. 830-846

    Research output: Contribution to journal › Article › Research › peer-review

  12. Published

    Modification of eutectic Si in Al-Si based alloys

    Li, J., Albu, M., Ludwig, T. H., Matsubara, Y., Arnberg, L., Tsunekawa, Y. & Schumacher, P., 2014, In: Materials Science Forum. 794-796, p. 130-136

    Research output: Contribution to journal › Article › Research › peer-review

  13. Published

    Non-destructive determination of the primary silicon particle size in hypereutectic aluminium-silicon

    Petkov, T., Berbic, M., Pabel, T. & Schumacher, P., 2014.

    Research output: Contribution to conference › Poster › Research › peer-review

  14. Published

    Nucleation Kinetics of Entrained Eutectic Si in Al-5Si Alloys

    Li, J., Zarif, M. Z., Albu, M., McKay, B., Hofer, F. & Schumacher, P., 2014, In: Acta materialia. 72, p. 80-98

    Research output: Contribution to journal › Article › Research › peer-review

  15. Published

    Numerische Simulation und praktische Versuche zum Verbundgießen von Aluminiumlegierungen

    Heugenhauser, S., Kaschnitz, E., Langbein, F. & Schumacher, P., 2014, In: Gießerei-Rundschau. p. 295-302

    Research output: Contribution to journal › Article › Research

  16. Published

    Optimierung der Wärmebehandlungsparameter für eine AlMgSi-Gusslegierung

    Petkov, T., Künstner, D., Pabel, T., Faerber, K., Kneißl, C. & Schumacher, P., 2014, In: Metall. 68, p. 148-154

    Research output: Contribution to journal › Article › Research › peer-review

  17. Published

    Refinement of eutectic Si in high purity Al-5Si alloys with combined Ca and P additions

    Ludwig, T., Li, J., Schaffer, P., Schumacher, P. & Arnberg, L., 2014, In: Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science. 46, p. 362-376

    Research output: Contribution to journal › Article › Research › peer-review

  18. Published

    Revealing the precipitation in Al-Cu based alloys with Sc addition

    Li, J., Albu, M., Hofer, F. & Schumacher, P., 2014.

    Research output: Contribution to conference › Poster › Research › peer-review

  19. Published

    Revealing the precipitation of Al-alloys subjected to high pressure torsion

    Li, J., Renk, O., Kutleša, P., Zhang, Z., Pippan, R. & Schumacher, P., 2014.

    Research output: Contribution to conference › Poster › Research › peer-review

  20. Published

    Solution Strengthened Ferritic Ductile Cast Iron Properties, Production and Application

    Stets, W., Löblich, H., Gassner, G. & Schumacher, P., 2014, In: International journal of metalcasting. 2, p. 35-40

    Research output: Contribution to journal › Article › Research › peer-review

  21. Published

    Thermodynamics-based computational Approach to Al-Cu Alloys: Grain Refinement

    Li, J., Promer, C., Jahn, A., Oberdorfer, B., Wurster, S., Martin, F. & Schumacher, P., 2014, Shape Casting: 5th International Symposium 2014. p. 77-87

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  22. Published

    Untersuchung der Wirkung der Hauptlegierungselemente bei konventionellen Druckgusslegierungen

    Tucan, K.-P., Hofer, P., Schindelbacher, G., Schumacher, P. & Gschwandtner, R., 2014, In: Gießerei-Rundschau. p. 303-310

    Research output: Contribution to journal › Article › Research › peer-review

  23. 2013
  24. Published

    Prediction of the as-cast structure of Al-4.0 Wt Pct Cu ingots

    Ahmadein, M., Wu, M., Li, J. H., Schumacher, P. & Ludwig, A., 1 Jun 2013, In: Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science. 44, 6, p. 2895-2903 9 p.

    Research output: Contribution to journal › Article › Research › peer-review

  25. Published

    Heterogeneous Nucleation of αAl-Ti in Al-Ni-Si Alloys

    Mckay, B. J., Cizek, P., Schumacher, P. & O'Reilly, K. A. Q., 8 Apr 2013, Essential Readings in Light Metals. John Wiley & Sons Ltd, Vol. 3. p. 375-380 6 p.

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research

  26. Published

    Studies of the Action of Grain-Refining Particles in Aluminum Alloys

    Schumacher, P. & Greer, A. L., 8 Apr 2013, Essential Readings in Light Metals. John Wiley & Sons Ltd, Vol. 3. p. 366-374 9 p.

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research

  27. Published

    Zr-Poisoning of Grain Refiner Particles Studied in Al-Ni-Zr Amorphous Alloys

    Schumacher, P., Cizek, P. & Bunn, A. M., 8 Apr 2013, Essential Readings in Light Metals. John Wiley & Sons Ltd, Vol. 3. p. 381-386 6 p.

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research

  28. Published

    Alloy, useful for high pressure die casting of automobile and aircraft constructions, comprises a specified range of silicon, manganese, magnesium, scandium and zirconium, impurities and aluminum

    Schumacher, P. (Inventor) & Faerber, K. (Inventor), 21 Mar 2013, IPC No. B22D17/00, C22C21/06, C22C21/08, Patent No. DE102012216845 (A1), Priority date 20 Sept 2011, Priority No. AT2011000135120110920

    Research output: Patent

  29. Published

    A new multi-zone model for porosity distribution in Al-Si alloy castings: Reportnr. 7923; Auftraggeber: Acta Materialia, Richard Wagner PhD; Ms No: A-12-2046R1, Review

    Schumacher, P. (Reviewer), 2013, Elsevier.

    Research output: Other contribution › Transfer › peer-review

  30. Published

    An Investigation on the effect of structural and microstructural attributes on magnetostriction of Tb-Dy-Fe and Fe-Ga alloys: Reportnr.: 5726

    Schumacher, P. (Reviewer), 2013, Indien

    Research output: Other contribution › Transfer › peer-review

  31. Published

    As-cast high silicon ductile irons with optimised mechanical properties and remarkable fatique properties

    Schumacher, P. (Reviewer), 2013, Maney Publishing.

    Research output: Other contribution › Transfer › peer-review

  32. Published

    Atomic observation of SR in high purity melt spun Al-5wt%Si based Alloys

    Li, J. & Schumacher, P., 2013, Atomic Observation of SR in high purity melt spun Al-5wt%Si based Alloys. p. 509-512

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  33. Published

    Determination of heat treatment parameters for an AlMgSi casting alloy

    Petkov, T., Künstner, D., Pabel, T., Kneißl, C., Faerber, K. & Schumacher, P., 2013, In: Casting plant and technology international. p. 10-17

    Research output: Contribution to journal › Article › Research › peer-review

  34. Published

    Effects of Yb Additions on Refinement of Eutectic Si in Al-5Si Alloys

    Li, J. & Schumacher, P., 2013, Effects of Yb Additions on Refinement of Eutectic Si in Al-5Si Alloys. p. 1017-1022

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  35. Published

    Effects of Yb Additions on Refinement of Eutectic Si in Al-5Si Alloys

    Li, J. & Schumacher, P., 2013, Light Metals 2013. p. 1017-1022

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research

  36. Published

    Erweiterung des Eigenschaftspotentials der Legierung Al Mg5Si2Mn durch eine gezielte Wärmebehandlung

    Petkov, T., Künstner, D., Pabel, T., Faerber, K., Kneißl, C. & Schumacher, P., 2013, In: Berg- und hüttenmännische Monatshefte : BHM. 158, p. 104-112

    Research output: Contribution to journal › Article › Research › peer-review

  37. Published

    Evidence for an extensive, undercooling-mediated transition in growth orientation and novel dendritic seaweed microstructures in Cu-8,9wt% Ni

    Schumacher, P. (Reviewer), 2013, UK : Elsevier.

    Research output: Other contribution › Transfer › peer-review

  38. Published

    Evolution of Texture and its Correlation with Microstructure and Mechanical Property Anisotropy in AA7010 Aluminium Alloy: Reportnr.: 5703; Auftraggebern: Indian Institute of Science Bangalore 560 012, Indien, Mr. Chandan Mondal; Review

    Schumacher, P. (Reviewer), 2013

    Research output: Other contribution › Transfer › peer-review

  39. Published

    Hot cracking susceptibility of AlSi7MgCu alloys

    Pabel, T., Kneißl, C., Schumacher, P., Faerber, K. & Bozorgi, S., 2013, In: Foundry review. 5, 1, p. 4-5

    Research output: Contribution to journal › Article › Research › peer-review

  40. Published

    Hot cracking susceptibility of AlSi7MgCu alloys and effects of alloying elements magnesium and copper

    Pabel, T., Bozorgi, S., Kneißl, C., Faerber, K. & Schumacher, P., 2013, In: China Foundry. 4, p. 248-253

    Research output: Contribution to journal › Article › Research › peer-review

  41. Published

    Modification of the eutectic Mg2Si-Phase of AlMgSi-Cast Alloys

    Pabel, T., Petkov, T., Kneißl, C. & Schumacher, P., 2013, Modification of the eutectic Mg2Si-Phase of AlMgSi-Cast Alloys. p. 303-304

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  42. Published

    Modification of the Eutectic Mg2Si-Phase of AlMgSi-Cast Alloys

    Pabel, T., Petkov, T., Kneißl, C. & Schumacher, P., 2013, Light Metals 2013. p. 303-304

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research

  43. Published

    Nichtmetallische Einschlüsse in Edelstählen: Korrelation von unterschiedlichen Prüfmethoden

    Tazreiter, A., Schützenhöfer, W., Beck, R. & Schumacher, P., 2013, In: Practical metallography = Praktische Metallographie. Sonderband, p. 221-226

    Research output: Contribution to journal › Article › Research

  44. Published

    Refinement of Eutectic Si Phase in Al-5Si Alloys with Yb Additions

    Li, J., SUETSUGU, S., TSUNEKAWA, Y. & Schumacher, P., 2013, In: Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science. 44, p. 669-681

    Research output: Contribution to journal › Article › Research › peer-review

  45. Published

    Solution Strengthened Ferritic Ductile Cast Iron According DIN EN 1563: 2012-Properties, Production and Application: Reportnr. 1733, Auftraggeber: 2013 Keith Millis Sympostium, AFS Transactions, Review

    Stets, W., Löblich, H., Schumacher, P. & Gassner, G., 2013, Proceedings of the 2013 Keith Millis Symposium on Ductile Cast Iron. American Foundry Society

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  46. Published

    Tailoring Precipitates in Mg-6Zn-2Gd based Alloy subjected to high pressure torsion

    Li, J. & Schumacher, P., 2013, Tailoring Precipitates in Mg-6Zn-2Gd based alloy subjected to high pressure torsion. p. 351-356

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  47. Published

    Tailoring Precipitates in Mg-6Zn-2Gd based Alloy Subjected to High Pressure Torsion

    Li, J. & Schumacher, P., 2013, Magnesium Technology 2013. p. 351-356

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research

  48. Published

    The grain refinement mechanism of cast aluminium by zirconium

    Schumacher, P. (Reviewer), 2013, Elsevier.

    Research output: Other contribution › Transfer › peer-review

  49. Published

    The microstructure of melt-spun Al-5Ti-1B-1Re master alloy and its refining efficiency on as-cast A356 alloys

    Schumacher, P., 2013, In: Journal of alloys and compounds. D, p. 1-1

    Research output: Contribution to journal › Article › Research › peer-review

  50. Published

    Vliv legujicich prvků na slévárenskych slitin AlSi7MgCu ke vzniku trhlin za tepla

    Pabel, T., Bozorgi, S., Kneißl, C., Faerber, K. & Schumacher, P., 2013, In: Slévárenství. p. 263-270

    Research output: Contribution to journal › Article › Research › peer-review

  51. Published

    Werkstoffe in der Fertigung

    Petkov, T., Künstner, D., Pabel, T., Faerber, K., Kneißl, C. & Schumacher, P., 2013, In: Werkstoffe in der Fertigung. p. 39-42

    Research output: Contribution to journal › Article › Research › peer-review

  52. 2012
  53. Published

    Einfluss der Legierungselemente auf die Heißrissneigung bei AlSi7MgCu-Gusslegierungen

    Pabel, T., Bozorgi, S., Kneißl, C., Faerber, K. & Schumacher, P., Sept 2012, In: Gießerei. 99, 9, p. 30-37

    Research output: Contribution to journal › Article › Research › peer-review

Previous 1 2 3 4 5 6 Next
View graph of relations

Latest Research Output

View more (264)