Peter Schumacher

201 - 264 out of 264Page size: 100

Publications / Theses

  1. 2010
  2. Published

    Formenkonzept und Ergebnisse gießtechnologischer Versuche zur Entwicklung neuer Aluminiumlegierungen

    Kneißl, C., Pabel, T., Dambauer, G. & Schumacher, P., 2010, In: Druckguss-Praxis. p. 85-90

    Research output: Contribution to journal › Article › Research › peer-review

  3. Published

    Gefügeuntersuchungen von metallischen Proben mittels Computertomographie

    Rosc, J., Geier, G., Pabel, T., Habe, D. & Schumacher, P., 2010.

    Research output: Contribution to conference › Poster › Research › peer-review

  4. Published

    Impurities in Al-5Ti-1B (WT.%) grain refiner rod

    McKay, B., Nunner, G., Geier, G. & Schumacher, P., 2010, Light Metals 2010. p. 613-618

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  5. Published

    Methode für die Bewertung von Porositätsanalysen von CT Daten

    Rosc, J., Geier, G. F., Habe, D., Pabel, T. & Schumacher, P., 2010, Proceedings - Industrielle Computertomographie - Fachtagung. p. 85-92

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  6. Published

    Methode für die Bewertung von Porositätsanalysen von CT-Daten

    Rosc, J., Habe, D., Pabel, T., Geier, G. F. & Schumacher, P., 2010, In: Gießerei-Rundschau. 57, 11/12, p. 244-246

    Research output: Contribution to journal › Article › Research › peer-review

  7. Published

    Microstructural features of the grain-refined sand cast AlZn20 alloy

    Haberl, K., Krajewski, W. K. & Schumacher, P., 2010, In: Archives of Metallurgy and Materials. 55, 3, p. 837-841 5 p.

    Research output: Contribution to journal › Article › Research › peer-review

  8. Published

    Modelling the effect of SiC mass fraction on crystallization of magnesium metal matrix composite, AZ91/SiC

    Lelito, J., Zak, P., Suchy, J., Krajewski, W., Krawiec, H., Greer, L., Shirzadi, A., Schumacher, P., Haberl, K. & Darlak, P., 2010, In: Inzynieria Materialowa. 3, p. 703-707

    Research output: Contribution to journal › Article › Research › peer-review

  9. Published

    Modelling the effect of SiC particle size on crystallization of magnesium metal matrix composite, AZ91/SiC

    Zak, P., Lelito, J., Suchy, J., Krajewski, W., Krawiec, H., Haberl, K., Schumacher, P., Greer, L., Shirzadi, A. & Gracz, B., 2010, In: Inzynieria Materialowa. p. 699-702

    Research output: Contribution to journal › Article › Research › peer-review

  10. Published

    Möglichkeiten einer modifizierten Wärmebehandlung für untereutektische Aluminium-Silizium Legierungen

    Schumacher, P., Pabel, T. & Dambauer, G., 2010, In: Der Wärmebehandlungsmarkt. 17, 3, p. 5-10

    Research output: Contribution to journal › Article › Research › peer-review

  11. Published

    Schmelzequalität von Al-Legierungen - Charakterisierung als Basis für Verbesserungen

    Haberl, K., Schumacher, P. & Stauder, B., 2010, In: Berg- und hüttenmännische Monatshefte : BHM. p. 493-498

    Research output: Contribution to journal › Article › Research › peer-review

  12. Published

    Simulation von Verzug und Eigenspannung im Druckguss - ein Vergleich zwischen Simulation und Experiment

    Hofer, P., Kaschnitz, E. & Schumacher, P., 2010, In: Gießerei-Rundschau. p. 182-186

    Research output: Contribution to journal › Article › Research › peer-review

  13. Published

    Study of heterogeneous nucleation in high purity Al-Si alloys with Sr addition

    Schumacher, P., Zarif, M. Z. & McKay, B., 2010, Supplemental Proceedings: Volume 2: Materials Characterization, Computation, Modeling and Energy. p. 381-388

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  14. Published

    Study of the effect of Strontium (Sr) on the nucleation of eutectic Silicon (Si) in high purity hypoeutectic Al-5Si alloys

    Li, J., Zarif, M. Z. & Schumacher, P., 2010, In: Berg- und hüttenmännische Monatshefte : BHM. p. 506-511

    Research output: Contribution to journal › Article › Research › peer-review

  15. Published

    TEM investigation of a novel Fe containing phase in high purity Al-Si-Fe alloys

    Zarif, M. Z., McKay, B., Li, J. & Schumacher, P., 2010, In: Berg- und hüttenmännische Monatshefte : BHM. p. 499-505

    Research output: Contribution to journal › Article › Research › peer-review

  16. Published

    Untersuchung der Legierung THX 540 (AlMg5Si2Mn) in Abhängigkeit von verwendeten Thixoparametern

    Bozorgi, S., Schumacher, P. & Eder, C., 2010, In: Berg- und hüttenmännische Monatshefte : BHM. p. 512-517

    Research output: Contribution to journal › Article › Research › peer-review

  17. Published

    Vergleich der Graphitmodifikation

    Geier, G., Bauer, W. & Schumacher, P., 2010, In: Gießerei-Praxis (Giessereipraxis). p. 10-15

    Research output: Contribution to journal › Article › Research › peer-review

  18. 2009
  19. Published

    2nd International Conference on Advances in Solidification Processes ICASP-2, 17-20 June 2008, Seggau Castle, Graz, Austria Preface

    Schumacher, P., McKay, B., Eck, S. & Ludwig, A., 2009, In: International journal of cast metals research. 22, p. 1-1

    Research output: Contribution to journal › Article › Research › peer-review

  20. Published

    Assessing Casting Quality using Computed Tomography with advanced Visualization Techniques

    Geier, G., Rosc, J., Hadwiger, M., Fritz, L., Habe, D., Pabel, T. & Schumacher, P., 2009, Shape Casting: The 3rd International Symposium. Campbell, J., Crepean, P. N. & Tiryakioglu, M. (eds.). p. 131-139

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  21. Published

    Characterization of the melt quality and impurity content of an LM25 alloy

    Haberl, K., Schumacher, P., Geier, G. & Stauder, B., 2009, Shape casting: Third International Symposium, TMS 2009. p. 181-188

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  22. Published

    Characterization of the Melt Quality and Impurity Content of an Lm25 Alloy

    Haberl, K., Schumacher, P., Geier, G. F. & Stauder, B., 2009, In: Metallurgical and Materials Transactions B: Process Metallurgy and Materials Processing Science. 40B, p. 812-821

    Research output: Contribution to journal › Article › Research › peer-review

  23. Published

    Einsparpotentiale durch eine modifizierte Wärmebehandlung für untereutektische Aluminium-Silizium Legierungen

    Dambauer, G., Pabel, T. & Schumacher, P., 2009, In: Gießerei-Praxis (Giessereipraxis). p. 294-300

    Research output: Contribution to journal › Article › Research › peer-review

  24. Published

    Entwicklung eines Kokillensets zur Bestimmung technologischer Eigenschaften von Al-Legierungen im Niederdruckkokillenguss

    Kneißl, C., Pabel, T., Dambauer, G. & Schumacher, P., 2009, In: Gießerei-Praxis (Giessereipraxis). p. 320-324

    Research output: Contribution to journal › Article › Research › peer-review

  25. Published

    Formenkonzept und Ergebnisse gießtechnologischer Versuche zur Legierungsentwicklung im Niederdruckkokillenguss

    Kneißl, C., Pabel, T., Dambauer, G. & Schumacher, P., 2009, In: Gießerei-Rundschau. 56, p. 120-125

    Research output: Contribution to journal › Article › Research › peer-review

  26. Published

    Gusseisen mit Vermiculargraphit - Modifikationsverhalten von Mg, Ce, und La bei unterschiedlichen Impfzuständen

    Geier, G. F., Bauer, W. & Schumacher, P., 2009, In: Gießerei-Rundschau. p. 201-205

    Research output: Contribution to journal › Article › Research › peer-review

  27. Published

    Impurities in Al-5Ti-1B grain refiner rod

    McKay, B. J., Nunner, G., Geier, G. F. & Schumacher, P., 2009, In: International journal of cast metals research. 22, 1-4, p. 212-215 4 p.

    Research output: Contribution to journal › Article › Research › peer-review

  28. Published

    Niederdruckkokillenguss - Entwicklung eines Kokillensets zur Bestimmung technologischer Eigenschaften von Al-Legierungen im Niederdruckkokillenguss

    Pabel, T., Kneißl, C., Dambauer, G. & Schumacher, P., 2009, In: Gießerei-Praxis (Giessereipraxis). p. 320-324

    Research output: Contribution to journal › Article › Research › peer-review

  29. Published

    Wärmebehandlungsparameter - Einsparpotentiale durch eine modifizierte Wärmebehandlung für untereutektische Aluminium-Silizium Legierungen

    Dambauer, G., Pabel, T. & Schumacher, P., 2009, In: Gießerei-Praxis (Giessereipraxis). p. 294-300

    Research output: Contribution to journal › Article › Research › peer-review

  30. 2008
  31. Published

    Die Eignung des Unterdruckdichtetests zur Bestimmung der Schmelzereinheit von Al-Legierungen

    Haberl, K., Schumacher, P., Geier, G. F. & Stauder, B., 2008, In: Gießerei. 95, 10, p. 48-54

    Research output: Contribution to journal › Article › Research › peer-review

  32. Published

    Die Eignung des Unterdruckdichtetests zur Bestimmung der Schmelzereinheit von Aluminiumlegierungen

    Haberl, K., Schumacher, P. & Geier, G. F., 2008, In: Gießerei-Rundschau. 55, 5/6, p. 100-104

    Research output: Contribution to journal › Article › Research › peer-review

  33. 2007
  34. Published

    Comparison of results for numerical simulations of castings with x-ray computed tomography reconstructions

    Geier, G. F., Kaschnitz, E., Pabel, T., schindelbacher, G. & Schumacher, P., 2007.

    Research output: Contribution to conference › Poster › Research › peer-review

  35. Published

    Comparison of results of numerical simulations of castings with x-ray computed tomography reconstructions

    Geier, G., Kaschnitz, E., Pabel, T., Schindelbacher, G. & Schumacher, P., 2007.

    Research output: Contribution to conference › Poster › Research › peer-review

  36. Published

    Preliminary investigation on the Grain Refinement Behavior of ZrB2 Particles in Mg-Al Alloys

    Klösch, G., McKay, B. & Schumacher, P., 2007, Magnesium Technology.

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research

  37. Published

    Schmelzen von Magnesium - Optimierung der Strömungsverhältnisse in einem Magnesiumofen

    Rockenschaub, H., Pabel, T., Sigmund, A., Wohlmuth, P. & Schumacher, P., 2007

    Research output: Non-textual form › Web publication/site › Research

  38. 2006
  39. Published

    57-Fe Mössbauer spectroscopy on cementite Fe3C of steel and nanotube origin - a comparison

    Lichtenberger, A., Geier, G. F., Weber, S., Schifferl, H., Schumacher, P., Kolb, G., Lottermoser, W. & Amthauer, G., 2006.

    Research output: Contribution to conference › Poster › Research › peer-review

  40. Published

    Aspects of modern casting engineering

    Schumacher, P., Pabel, T., Rockenschaub, H., Kaschnitz, E. & Geier, G. F., 2006, International Foundry Conference Portoroz 2006. p. 1-5

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  41. Published

    Comparison of results for numerical simulations of castings with x-ray computed tomography reconstructions

    Geier, G. F., Kaschnitz, E., Pabel, T., Schindelbacher, G. & Schumacher, P., 2006, Comparison of results for numerical simulations of castings with x-ray computed tomography reconstructions. p. 1-1

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  42. Published

    Comparison of results for numerical simulations of castings with x-ray computed tomography reconstructions

    Geier, G. F., Kaschnitz, E., Pabel, T., Schindelbacher, G. & Schumacher, P., 2006.

    Research output: Contribution to conference › Poster › Research › peer-review

  43. Published

    Comparison of results of numerical simulations of castings with x-ray computed tomography reconstructions

    Geier, G. F., Kaschnitz, E., Pabel, T., Schindelbacher, G. & Schumacher, P., 2006.

    Research output: Contribution to conference › Poster › Research › peer-review

  44. Published

    Microstructural Control by Grain Refinement

    Schumacher, P., 2006, In: Livarski vestnik. 53/2006, p. 2-18

    Research output: Contribution to journal › Article › Research › peer-review

  45. Published

    Optimierung der Wärmebehandlungsparameter der Legierung EN AC-Al Si7Mg0.x

    Dambauer, G., Pabel, T. & Schumacher, P., 2006, In: Gießerei-Rundschau. p. 50-56

    Research output: Contribution to journal › Article › Research › peer-review

  46. Published

    Optimierung der Wärmebehandlungsparameter der Legierung EN AC-AlSi7Mg0,x

    Dambauer, G., Pabel, T. & Schumacher, P., 2006, In: Gießerei-Rundschau. 53, p. 50-56

    Research output: Contribution to journal › Article › Research › peer-review

  47. Published

    Preliminary Investigation on the Formation and Grain Refinement of Particles in Mg-Al Alloys

    Klösch, G., Mckay, B. & Schumacher, P., 2006, Magnesium technology 2006 : proceedings of symposium ... held during the TMS 2006 Annual Meeting in San Antonio, Texas, USA, March 12-16,2006 . Luo, A. A. (ed.). TMS, p. 69-75

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  48. Published

    Untersuchung zum Kornfeinungsverhalten von ZrB2-Partikeln in Magnesium-Aluminium-Legierungen

    Klösch, G., Mckay, B. & Schumacher, P., 2006, In: Gießerei-Rundschau. 53, p. 58-62

    Research output: Contribution to journal › Article › Research › peer-review

  49. 2005
  50. Published

    Al-Legierungen

    Schumacher, P., 2005.

    Research output: Contribution to conference › Poster › Research › peer-review

  51. Published

    An Overview of Heterogeneous Nucleation Mechanisms in Al Alloys

    Mckay, B. & Schumacher, P., 2005, TMS 2005. p. 00-00

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  52. Published

    Applied R&D Results for Foundries and End-users of Castings

    Schumacher, P., 2005, 1. Foundry Fair. p. 00-00

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  53. Published

    Dünnwandige Strukturteile für den Fahrzeugbau

    Bittner, G., Kniewallner, L., Menk, W. & Schumacher, P., 2005, In: Gießerei kompakt. 01, p. 23-27

    Research output: Contribution to journal › Article › Research › peer-review

  54. Published

    Grain Refinement of Mg-Al Alloys with Zr Addition

    Schumacher, P., 2005.

    Research output: Contribution to conference › Poster › Research › peer-review

  55. Published

    Heterogeneous nucleation mechanisms of TiB2 particles in Al alloys

    McKay, B. J. & Schumacher, P., 2005, p. 155-164. 10 p.

    Research output: Contribution to conference › Paper › peer-review

  56. Published

    Kornfeinung

    Schumacher, P., 2005.

    Research output: Contribution to conference › Poster › Research › peer-review

  57. Published

    Microstructure transition from lamellar to compacted graphite using different modification agents

    Geier, G. F., Bauer, W., Mckay, B. & Schumacher, P., 2005, In: Materials science and engineering: A, Structural materials: properties, microstructure and processing. p. 339-345

    Research output: Contribution to journal › Article › Research › peer-review

  58. Published

    Microtructural Control by Grain Refinement

    Schumacher, P., 2005, 45. Gießereitagung. p. 02-18

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  59. Published

    Stress/Strain Behaviour and Fatigue Limit of Grey Cast Iron

    Willidal, T., Bauer, W. & Schumacher, P., 2005, In: Materials science and engineering: A, Structural materials: properties, microstructure and processing. p. 578-582

    Research output: Contribution to journal › Article › Research › peer-review

  60. Published

    The Role of Heterogeneous Boride Particles in the Grain Refinement of Al Alloys

    Schumacher, P., 2005.

    Research output: Contribution to conference › Poster › Research › peer-review

  61. 2004
  62. Published

    An investigative study of Si poisoning in Al-Si alloys using the metallic glass technique

    McKay, B. & Schumacher, P., 2004, An investigative study of Si poisoning in Al-Si alloys using the metallic glass technique. p. 157-166

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  63. Published

    Beschleunigtes Aufschmelzen von Magnesium-Masseln durch optimierte Strömungsverhältnisse

    Rockenschaub, H., Pabel, T., Romansky, M., Schumacher, P. & Sigmund, A., 2004, In: Druckguss-Praxis. p. 24-32

    Research output: Contribution to journal › Article › Research › peer-review

  64. Published

    Die kontinuierliche Entwicklung des ÖGI zum Kompetenzzentrum für Gießereitechnik

    Schumacher, P., 2004, In: Gießerei-Rundschau. 51, 5/6, p. 107

    Research output: Contribution to journal › Article › Research

  65. Published

    Dünnwandige Strukturteile für den Fahrzeugbau

    Bittner, G., Kniewallner, L., Menk, W. & Schumacher, P., 2004, In: Gießerei. 91, 10, p. 32-38

    Research output: Contribution to journal › Article › Research

  66. Published

    Microstructural characterisation of a rapidly solidified NiMo steel

    Briceno-Gomez, M., Brown, P. M., Titchmarsh, J. M., Ahmed, S. & Schumacher, P., 2004, In: Institute of Physics conference series . 179, p. 257-260 4 p.

    Research output: Contribution to journal › Conference article › peer-review

  67. Published

    Simulation von Transportphänomenen bei der Erstarrung von Gussteilen: Vorhersage von Makroseigerungen und Korngrößenverteilung

    Ludwig, A., Wu, M. & Schumacher, P., 2004, In: Gießerei-Rundschau. 51, p. 212-218

    Research output: Contribution to journal › Article › Research › peer-review

  68. 2003
  69. Published

    Grain refinement of aluminium alloys by inoculation

    Greer, A. L., Cooper, P. S., Meredith, M. W., Schneider, W., Schumacher, P., Spittle, J. A. & Tronche, A., 1 Jan 2003, In: Advanced Engineering Materials. 5, 1-2, p. 81-91 11 p.

    Research output: Contribution to journal › Review article › peer-review

  70. Published

    TEM investigation of heterogeneous nucleation mechanism in Al-Si alloys

    Schumacher, P. & McKay, B., 2003, In: Journal of non-crystalline solids. p. 123-128

    Research output: Contribution to journal › Article › Research › peer-review

  71. 2001
  72. Published

    Heterogeneous nucleation in an Al-Ni-Si alloy studied using a metallic galss technique

    McKay, B., Cizek, P. & Schumacher, P., 2001, In: Materials science and engineering: A, Structural materials: properties, microstructure and processing. p. 240-244

    Research output: Contribution to journal › Article › Research › peer-review

  73. 2000
  74. Published

    Nucleation mechanisms of TIBAL additions in Al-Ni-Si alloys

    McKay, B., Cizek, P. & Schumacher, P., 2000, Nucleation mechanisms of TIBAL additions in Al-Ni-Si alloys. p. 833-838

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

Previous 1 2 3 Next
View graph of relations

Latest Research Output

View more (264)