Menghuai Wu

301 - 350 out of 355Page size: 50

Publications / Theses

  1. 2006
  2. Published

    About the formation of macrosegregations in continuous casting of Sn-Bronze

    Ludwig, A., Gruber-Pretzler, M., Wu, M., Kuhn, A. & Riedle, J., 2006, In: Fluid Dynamics and Materials Processing. 1, p. 285-300

    Research output: Contribution to journal › Article › Research › peer-review

  3. Published

    A Mixture Two-Phase Model for Macrosegregation during Solidification

    Tang, Y., Wu, M. & Ludwig, A., 2006, A Mixture Two-Phase Model for Macrosegregation during Solidification. p. 283-290

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  4. Published

    A Mixture Two-Phase Model for Macrosegregation during Solidification

    Tang, Y., Wu, M. & Ludwig, A., 2006.

    Research output: Contribution to conference › Poster › Research › peer-review

  5. Published

    A Study of Macrosegregation Formation in Continuous Casting of a Technical CuSnP Bronze

    Gruber-Pretzler, M., Mayer, F., Ishmurzin, A., Wu, M. & Ludwig, A., 2006, A Study of Macrosegregation Formation in Continuous Casting of a Technical CuSnP Bronze. p. 799-806

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  6. Published

    A Study of Macrosegregation Formation in Continuous Casting of a Technical CuSnP Bronze

    Gruber-Pretzler, M., Mayer, F., Ishmurzin, A., Wu, M. & Ludwig, A., 2006.

    Research output: Contribution to conference › Poster › Research › peer-review

  7. Published

    Continous Casting of Hypermonotectic AlBiZn Alloys: Experimental Investigations and Numerical Simulation

    Gruber-Pretzler, M., Mayer, F., Wu, M., Moiseev, J., Tonn, B. & Ludwig, A., 2006, Continous Casting. p. 194-201

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research

  8. Published

    Control of Interdendritic Convection by the Application of Steady and Time-Dependent Magnetic Fields during Directional Solidification of Aluminium Alloys

    Hainke, M., Johannes, D., Wu, M. & Ludwig, A., 2006, Control of Interdendritic Convection by the Application of Steady and Time-Dependent Magnetic Fields during Directional Solidification of Aluminium Alloys. p. 317-324

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  9. Published

    Control of Interdendritic Convection by the Application of Steady and Time-Dependent Magnetic Fields during Directional Solidification of Aluminium Alloys

    Hainke, M., Dagner, J., Wu, M. & Ludwig, A., 2006.

    Research output: Contribution to conference › Poster › Research › peer-review

  10. Published

    Graviy-Induced Convection during Directional Solidification of Hypermonotectic Alloys

    Ludwig, A., Wu, M., Abondano, M. & Ratke, L., 2006, In: Materials Science Forum. 508-509, p. 193-198

    Research output: Contribution to journal › Article › Research › peer-review

  11. Published

    Modeling Macrosegregation with a Multiphase Approach: Examples and Applications

    Wu, M. & Ludwig, A., 2006, In: JOM. 58, p. 16-18

    Research output: Contribution to journal › Article › Research › peer-review

  12. Published

    Modeling of Macrosegregations in Continous Casting of Sn-Bronze

    Gruber-Pretzler, M., Mayer, F., Wu, M. & Ludwig, A., 2006, Continous Casting. p. 219-225

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research

  13. Published

    Modeling of the thermo-solutal convection, shrinkage flow and grain movement during globular equiaxed solidification in a multiphase system-II. Application of model

    Wu, M., 2006, In: Jinshu-xuebao : Acta metallurgica Sinica. 42, p. 591-598

    Research output: Contribution to journal › Article › Research › peer-review

  14. Published

    Modeling of the thermo-solutal convection, shrinkage flow and grain movement during globular equiaxed solidification in a multiphase system-I. three phase flow model

    Wu, M., 2006, In: Jinshu-xuebao : Acta metallurgica Sinica. 42, p. 584-590

    Research output: Contribution to journal › Article › Research › peer-review

  15. Published

    Modelling of the thermo-solutal convection, shrinkage flow and grain movement during globular equiaxed solidification in a multi-phase system - II. Application of model

    Wang, T., Li, T., Jin, J., Cao, Z., Grimmig, T., Bührig-Polaczek, A., Wu, M. & Ludwig, A., 2006, In: Jinshu-xuebao : Acta metallurgica Sinica. 42, p. 591-598

    Research output: Contribution to journal › Article › Research › peer-review

  16. Published

    Modelling of the thermo-solutal convection, shrinkage flow and grain movement during globular equiaxed solidification in a multi-phase system - I. Three-phase flow model

    Wang, T., Zhang, X., Jin, J., Wu, M., Ludwig, A., Pustal, B. & Bührig-Polaczek, A., 2006, In: Jinshu-xuebao : Acta metallurgica Sinica. 42, p. 584-590

    Research output: Contribution to journal › Article › Research › peer-review

  17. Published

    Multiphase Flow Simulation of the Cooling Channel Rheocasting Process of A-356 Alloy

    Wang, T., Pustal, B., Wu, M., Bührig-Polaczek, A., Ludwig, A., Yao, S., Hao, H., Li, T., Cao, Z., Zhang, X. & Jin, J., 2006, Multiphase Flow Simulation of the Cooling Channel Rheocasting Process of A-356 Alloy. p. 1071-1078

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  18. Published

    Performance Studie zu Parallelrechnungen (Shared Memory vs. Cluster) von metallurgischen Mehrphasensimulationen

    Mayer, F., Wu, M., Ludwig, A., Gruber-Pretzler, M., Pfeiler, C., Hainke, M. & Otto, K.-J., 2006.

    Research output: Contribution to conference › Poster › Research › peer-review

  19. Published

    Simulation of Particle and Bubble Motion in a Steel Continuous Caster

    Pfeiler, C., Ludwig, A. & Wu, M., 2006, TMS Proceedings. p. 737-744

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  20. Published

    Volume Averaging Concept for the Mixed Columnar-Equiaxed Solidification

    Wu, M. & Ludwig, A., 2006, Volume Averaging Concept for the Mixed Columnar-Equiaxed Solidification. p. 291-298

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  21. 2005
  22. Published

    Modeling the columnar-to-equiaxed transition with a three-phase Eulerian approach

    Ludwig, A. & Wu, M., 15 Dec 2005, In: Materials science and engineering: A, Structural materials: properties, microstructure and processing. 413-414, p. 109-114 6 p.

    Research output: Contribution to journal › Article › Research › peer-review

  23. Published

    Simulation of cooling channel rheocasting process of A356 aluminum alloy using three-phase volume averaging model

    Wang, T., Pustal, B., Abondano, M., Grimmig, T., Bührig-Polaczek, A., Wu, M. & Ludwig, A., 1 Apr 2005, In: Transactions of Nonferrous Metals Society of China (English Edition). 15, 2, p. 389-394 6 p.

    Research output: Contribution to journal › Article › Research › peer-review

  24. Published

    A 3D Three-Phase Eulerian Solidification Model for the Columnar-to-Equiaxed Transition (CET)

    Wu, M. & Ludwig, A., 2005, Int. Conf. on “Simulation and Modelling of Metallurgical Processes in Steelmaking. p. 273-286

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  25. Published

    A Way of Coupling Ternary Phase Diagram Information with Multiphase Solidification Simulations

    Ludwig, A., Gruber-Pretzler, M., Mayer, F., Ishmurzin, A. & Wu, M., 2005, In: Materials science and engineering: A, Structural materials: properties, microstructure and processing. 413-414, p. 485-489

    Research output: Contribution to journal › Article › Research › peer-review

  26. Published

    Continuous Casting of Hypermonotectic AlBiZn Alloys: Experimental Investigations and Numerical Simulation

    Gruber-Pretzler, M., Mayer, F., Wu, M., Moiseev, J., Tonn, B. & Ludwig, A., 2005, Int. Conf. on „Continuous Casting of Non-Ferrous Metals". p. 194-201

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  27. Published

    Influence of Argon Gas Bubbles and Non-Metallic Inclusions on the Flow Behavior in Steel Continuous Casting

    Pfeiler, C., Wu, M. & Ludwig, A., 2005, In: Materials science and engineering: A, Structural materials: properties, microstructure and processing. 413-414, p. 115-120

    Research output: Contribution to journal › Article › Research › peer-review

  28. Published

    Modeling of Macrosegregations in Continuous Casting of Sn-Bronze

    Gruber-Pretzler, M., Mayer, F., Wu, M. & Ludwig, A., 2005, Int. Conf. on „Continuous Casting of Non-Ferrous Metals". p. 219-225

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  29. Published

    Modelling the Columnar-to-Equiaxed Transition with a 3-Phase Eulerian Approach

    Ludwig, A. & Wu, M., 2005, In: Materials science and engineering: A, Structural materials: properties, microstructure and processing. 413-414, p. 109-114

    Research output: Contribution to journal › Article › Research › peer-review

  30. Published

    Modelling the Thermosolutal Convection, Shrinkage Flow and Grain Movement of Globular Equiaxed Solidification Using a Three Phase Model

    Wang, T., Wu, M., Ludwig, A., Abondano, M., Pustal, B. & Bührig-Polaczek, A., 2005, In: International journal of cast metals research. 18, p. 221-228

    Research output: Contribution to journal › Article › Research › peer-review

  31. Published

    Numerical Description of Particle and Bubble Motion in the Submerged Entry Nozzle Region during Steel Continuous Casting

    Pfeiler, C., Wu, M. & Ludwig, A., 2005, STEELSIM 2005. p. 231-250

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  32. Published

    Numerical Study of the Thermal-Solutal Convection and Grain Sedimentation during Globular Equiaxed Solidification

    Wu, M., Ludwig, A. & Luo, J., 2005, In: Materials Science Forum. 475-479, p. 2725-2730

    Research output: Contribution to journal › Article › Research › peer-review

  33. Published

    On the Impact of Macroscopic Phase Separation on Solidification Microstructures

    Wu, M., Ludwig, A., Pelzer, M. & Postl, U., 2005, In: Advanced Engineering Materials. 7-9, p. 846-851

    Research output: Contribution to journal › Article › Research › peer-review

  34. Published

    Shape and Stability of the Slag/Melt Interface in a Small DC ESR Process

    Kharicha, A., Ludwig, A. & Wu, M., 2005, In: Materials science and engineering: A, Structural materials: properties, microstructure and processing. 413-414, p. 129-134

    Research output: Contribution to journal › Article › Research › peer-review

  35. Published

    Simulation of Cooling Channel Rheocasting Process of A356 Aluminium Alloy Using a Three-Phase Volume Averaging Model

    Wang, T., Pustal, B., Abondano, M., Grimmig, T., Bührig-Polaczek, A., Wu, M. & Ludwig, A., 2005, In: Transactions of Nonferrous Metals Society of China. 15, p. 1-6

    Research output: Contribution to journal › Article › Research › peer-review

  36. Published

    Simulation of droplet formation during DC Electroslag-remelting process

    Kharicha, A., Ludwig, A. & Wu, M., 2005, Int. Conf. on “Simulation and Modelling of Metallurgical Processes in Steelmaking”. p. 343-360

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  37. Published

    Study of Spatial Phase Separation during Solidification and Its Impact on the Formation of Macrosegregations

    Wu, M. & Ludwig, A., 2005, In: Materials science and engineering: A, Structural materials: properties, microstructure and processing. 413-414, p. 192-199

    Research output: Contribution to journal › Article › Research › peer-review

  38. 2004
  39. Published

    About the interactions between thermo-solutal convection, shrinkage flow and grain sedimentation

    Ludwig, A., Wu, M., Wang, T. & Bührig-Polaczek, A., 2004, Computational Modeling and Simulation of Materials, III, Part B.. p. 491-502

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  40. Published

    Chapter 23: Grain Sedimentation and Melt Convection Phenomena during Globular Solidification

    Wu, M., Ludwig, A. & Bührig-Polaczek, A., 2004, Solidification and Crystallization. p. 204-212

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research

  41. Published

    Chapter 5: Modeling the Spatial Phase Separation Process in Hypermonotectic Alloys

    Wu, M., Ludwig, A. & Ratke, L., 2004, Solidification and Crystallization. p. 34-43

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research

  42. Published

    Consecutive process and microstructure modelling for aluminium sheet production

    Neumann, L., Kopp, R., Ludwig, A., Wu, M., Bührig-Polaczek, A., Schneider, M. & Gottstein, G., 2004, In: Modelling and simulation in materials science and engineering. 12, p. 19-31

    Research output: Contribution to journal › Article › Research › peer-review

  43. Published

    Modeling Macroscopic phase separation phenomena during solidification with an Eulerian multiphase approach

    Wu, M. & Ludwig, A., 2004, 6th Pacific Rim International Conference on Modeling of Casting and Solidification Processes. p. 239-246

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  44. Published

    Modeling of Free Surface and Thermo-Solutal Convection by a Three-Phase Model

    Wang, T., Wu, M., Ludwig, A., Pustal, B. & Bührig-Polaczek, A., 2004, 6th Pacific Rim International Conference on Modeling of Casting and Solidification Processes. p. 181-190

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  45. Published

    On convection induced phase separation during solidification

    Ludwig, A. & Wu, M., 2004, Multiphase Phenomena in Materials Processing. p. 93-107

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  46. Published

    On the interaction between macrosegregation, shrinkage flow and grain movement

    Ludwig, A., Wu, M. & Eck, S., 2004, Solidification processes and microstructures: A Symposium in honour of Wilfried Kurz. p. 99-110

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  47. Published

    Simulation von Transportphänomenen bei der Erstarrung von Gussteilen: Vorhersage von Makroseigerungen und Korngrößenverteilung

    Ludwig, A., Wu, M. & Schumacher, P., 2004, In: Gießerei-Rundschau. 51, p. 212-218

    Research output: Contribution to journal › Article › Research › peer-review

  48. 2003
  49. Published

    Modeling of marangoni-induced droplet motion and melt convection during solidification of hypermonotectic alloys

    Wu, M., Ludwig, A. & Ratke, L., 1 Jan 2003, In: Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science. 34, 12, p. 3009-3019 11 p.

    Research output: Contribution to journal › Article › Research › peer-review

  50. Published

    Grain evolution and macrosegregation in Al-4.0wt.%Cu casting: simulation and experimental evaluation

    Wu, M., Ludwig, A., Sahm, P. R. & Bührig-Polaczek, A., 2003, Modeling of Casting, Welding and Advanced Solidification Processes - X. p. 261-268

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  51. Published

    Influence of Convection and Grain Movement on Globular Equiaxed Solidification

    Wu, M., Ludwig, A., Bührig-Polaczek, A., Fehlbier, M. & Sahm, P. R., 2003, In: International journal of heat and mass transfer. 46, p. 2819-2832

    Research output: Contribution to journal › Article › Research › peer-review

  52. Published

    Influence of Phase-Transport Phenomena on Macrosegregation and Structure Formation during Solidification

    Wu, M. & Ludwig, A., 2003, In: Advanced Engineering Materials. 5, p. 62-66

    Research output: Contribution to journal › Article › Research › peer-review

  53. Published

    Modeling of Marangoni Convection during Solidification of Hypermonotectic Alloys

    Ludwig, A., Wu, M. & Ratke, L., 2003, In: Modelling and simulation in materials science and engineering. p. 755-769

    Research output: Contribution to journal › Article › Research › peer-review

  54. Published

    Modeling of Marangoni induced droplet motion and convection during solidification of hypermonotectic alloys

    Wu, M., Ludwig, A. & Ratke, L., 2003, In: Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science. 34, p. 3009-3019

    Research output: Contribution to journal › Article › Research › peer-review

Previous 1...3 4 5 6 7 8 Next
View graph of relations

Contact

Phone: 3103

Latest Research Output

View more (355)