Menghuai Wu

251 - 300 out of 355Page size: 50

Publications / Theses

  1. 2009
  2. Published

    Modeling equiaxed solidification with melt convection and grain sedimentation-I: Model description

    Wu, M. & Ludwig, A., 1 Nov 2009, In: Acta Materialia. 57, 19, p. 5621-5631 11 p.

    Research output: Contribution to journal › Article › Research › peer-review

  3. Published

    Modeling equiaxed solidification with melt convection and grain sedimentation-II. Model verification

    Wu, M. & Ludwig, A., 1 Nov 2009, In: Acta Materialia. 57, 19, p. 5632-5644 13 p.

    Research output: Contribution to journal › Article › Research › peer-review

  4. Published

    An Idea to Treat the Dendritic Morphology in the Mixed Columnar-Equiaxed Solidification

    Wu, M. & Ludwig, A., 2009, In: International journal of cast metals research. 22, p. 323-327

    Research output: Contribution to journal › Article › Research › peer-review

  5. Published

    Bulging vs. feeding, which mechanism dominates in regard to the formation of centerline segregation in steel continuous casting?

    Mayer, F., Wu, M. & Ludwig, A., 2009, Bulging vs. feeding, which mechanism dominates in regard to the formation of centerline segregation in steel continuous casting?. ASMET, p. 247-252

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  6. Published

    Experimental and Numerical Investigations of NH4Cl Solidification in a Mould. Part 2: numerical results

    Könözsy, L., Eck, S., Stefan Kharicha, M., Wu, M. & Ludwig, A., 2009, In: International journal of cast metals research. 22, 1-4, p. 172-174 3 p.

    Research output: Contribution to journal › Article › Research › peer-review

  7. Published

    Macrosegregation Prediction for Ternary Bronze Alloys International Foundary Research

    Grasser, M., Hao, J., Ishmurzin, A., Mayer, F., Wu, M., Ludwig, A., Hofmann, U. & Riedle, J., 2009, In: International foundry research (Giessereiforschung ; official journal of World Foundrymen Organization). 61, p. 42-45

    Research output: Contribution to journal › Article › Research › peer-review

  8. Published

    Micro-Macrosegregation prediction based on solidification simulation for continuous casting of ternary bronze alloys

    Grasser, M., Ishmurzin, A., Mayer, F., Wu, M., Ludwig, A., Hofmann, U. & Riedle, J., 2009, Modeling of casting, welding, and advanced solidification processes - XII. p. 221-228

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research

  9. Published

    Microstructure Prediction Based on Ternary Solidification Simulation for Continuous Casting of Bronze

    Grasser, M., Ishmurzin, A., Mayer, F., Wu, M., Ludwig, A., Hofmann, U. & Riedle, J., 2009, Modeling of casting, welding and advanced solidification processes XII: proceedings of the Tenth International Conference on Modeling of Casting, Welding and Advanced Solidification Processes held in Vancouver, BC, Canada on June 7 - 14, 2009 . Cockcroft, S. L. & Maijer, D. J. (eds.). Warrendale: TMS, p. 221-228

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  10. Published

    Modeling Equiaxed Solidification with Melt Convection and Grain Sedimentation, Part II: Model Verification

    Wu, M. & Ludwig, A., 2009, In: Acta materialia. 57, p. 5632-5644

    Research output: Contribution to journal › Article › Research › peer-review

  11. Published

    Modeling Equiaxed Solidification with Melt Convection and Grain Sedimentation, Part I: Model Description

    Wu, M. & Ludwig, A., 2009, In: Acta materialia. 57, p. 5621-5631

    Research output: Contribution to journal › Article › Research › peer-review

  12. Published

    Numerical and Experimental Investigation of NH4Cl Solidification in a Mould. Part 2: Numerical Results

    Könözsy, L., Stefan Kharicha, M., Eck, S., Wu, M. & Ludwig, A., 2009, In: International journal of cast metals research. 22, p. 172-174

    Research output: Contribution to journal › Article › Research › peer-review

  13. Published

    Numerical Investigation of Grid Influence for Formation of Macrosegregation

    Könözsy, L., Ishmurzin, A., Mayer, F., Grasser, M., Wu, M. & Ludwig, A., 2009, In: International journal of cast metals research. 22, p. 175-178

    Research output: Contribution to journal › Article › Research › peer-review

  14. Published

    Reformulation of the Time Averaged Joule Heating in the Presence of Temperature Fluctuations

    Kharicha, A., Schützenhöfer, W., Ludwig, A., Tanzer, R. & Wu, M., 2009, In: International journal of cast metals research. 22, p. 155-159

    Research output: Contribution to journal › Article › Research › peer-review

  15. Published

    Study of centerline macrosegregation in steel continuous casting with a two-phase volume averaging approach

    Ludwig, A., Mayer, F. & Wu, M., 2009, Study of centerline macrosegregation in steel continuous casting with a two-phase volume averaging approach. p. 279-286

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  16. Published

    The validation of a multiphase model for the macrosegregations and primary structure of high grade steel ingots

    Tanzer, R., Schützenhöfer, W., Reiter, G., Fauland, H. P., Könözsy, L., Ishmurzin, A., Wu, M. & Ludwig, A., 2009, In: Metallurgical and Materials Transactions B: Process Metallurgy and Materials Processing Science. 40, p. 305-311

    Research output: Contribution to journal › Article › Research › peer-review

  17. Published

    Using a Five-Phase Volume Averaging Approach to Model the Mixed Columnar-Equiaxed Solidification

    Wu, M. & Ludwig, A., 2009, Using a Five-Phase Volume Averaging Approach to Model the Mixed Columnar-Equiaxed Solidification. p. 537-544

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  18. Published

    Validation of a Multiphase Model for the Macrosegregation and Primary Structure of High Grade Steel Ingots

    Ishmurzin, A., Tanzer, R., Schuetzenhoefer, W., Reiter, G., Fauland, H. P., Könözsy, L., Wu, M. & Ludwig, A., 2009, In: Metallurgical and Materials Transactions B: Process Metallurgy and Materials Processing Science. 40, p. 305-311

    Research output: Contribution to journal › Article › Research › peer-review

  19. 2008
  20. Published

    Multiphase Flow Modeling and Its Application Potentials in Steel Continuous Casting

    Ludwig, A., Wu, M., Pfeiler, C. & Mayer, F., 2008, Multiphase Flow Modeling and Its Application Potentials in Steel Continuous Casting. p. 30-37

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  21. Published

    Multiphase Flow Modeling and Its Application Potentials in Steel Continuous Casting

    Wu, M., Ludwig, A., Pfeiler, C. & Mayer, F., 2008, In: Journal of iron and steel research international. 15, p. 30-37

    Research output: Contribution to journal › Article › Research › peer-review

  22. Published

    Multiphase/multicomponent modeling of solidification processes: Coupling solidification kinetics with thermodynamics

    Ishmurzin, A., Gruber-Pretzler, M., Mayer, F., Wu, M. & Ludwig, A., 2008, In: International journal of materials research : IJMR ; Zeitschrift für Metallkunde. 99.2008, 6, p. 618-625 8 p.

    Research output: Contribution to journal › Article › Research › peer-review

  23. Published

    Numerical Modeling of the Effect of Global Transport Phenomena on the Microstructure Formation

    Grasser, M., Mayer, F., Ishmurzin, A., Könözsy, L., Wu, M. & Ludwig, A., 2008, In: Berg- und hüttenmännische Monatshefte : BHM. 153, p. 278-281

    Research output: Contribution to journal › Article › Research › peer-review

  24. Published

    On the Formation of Macrosegregations in Steel Ingot Castings

    Wu, M., Könözsy, L., Ludwig, A., Schützenhöfer, W. & Tanzer, R., 2008, In: Steel research international. 79, p. 637-644

    Research output: Contribution to journal › Article › Research › peer-review

  25. Published

    On the Importance of Electric Currents Flowing directly into the Mould during an ESR Process

    Kharicha, A., Schützenhöfer, W., Ludwig, A., Tanzer, R. & Wu, M., 2008, In: Steel research international. 79, p. 632-636

    Research output: Contribution to journal › Article › Research › peer-review

  26. Published

    Solidification and Particle Entrapment during Continuous Casting of Steel

    Pfeiler, C., Thomas, B. G., Wu, M., Ludwig, A. & Kharicha, A., 2008, In: Steel research international. 79, p. 599-607

    Research output: Contribution to journal › Article › Research › peer-review

  27. 2007
  28. Published

    Using a three-phase deterministic model for the columnar-to-equiaxed transition

    Wu, M. & Ludwig, A., 1 Jul 2007, In: Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science. 38 A, 7, p. 1465-1475 11 p.

    Research output: Contribution to journal › Article › Research › peer-review

  29. Published

    A Model for Equiaxed Dendritic Solidification with Melt Convection and Grain Sedimentation

    Wu, M. & Ludwig, A., 2007, A Model for Equiaxed Dendritic Solidification with Melt Convection and Grain Sedimentation. p. 130-134

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  30. Published

    Combining Ternary Phase Diagram Information with Multiphase Solidification Simulations

    Ludwig, A., Ishmurzin, A., Gruber-Pretzler, M., Mayer, F., Wu, M., Tanzer, R. & Schützenhöfer, W., 2007, Combining Ternary Phase Diagram Information with Multiphase Solidification Simulations. p. 493-496

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  31. Published

    Correct electric current paths in a multiphase process involving two phases with large difference in electric conductivity

    Kharicha, A., Ludwig, A. & Wu, M., 2007, Correct electric current paths in a multiphase process involving two phases with large difference in electric conductivity.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  32. Published

    Eulerian multiphase modeling of solidification processes

    Wu, M., 2007

    Research output: Thesis › Habilitation thesis › peer-review

  33. Published

    Macrosegregation in Continuous Casting of Phosphor Bronze – Impact on Properties and Model-ing of Formation

    Gruber-Pretzler, M., Mayer, F., Wu, M., Ludwig, A., Riedle, J. & Hofmann, U., 2007, Macrosegregation in Continuous Casting of Phosphor Bronze – Impact on Properties and Model-ing of Formation. p. 265-279

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  34. Published

    Modeling Equiaxed Dendritic Solidification with Melt Convection and Grain Sedimentation

    Wu, M. & Ludwig, A., 2007, Xi'an International Symposium on Solidification (ISS07). p. 1-15

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  35. Published

    Numerical Study of the Impact of Gravity and Marangoni force on the Droplet Distribution of Hypermonotectic AlBi Alloys

    Gruber-Pretzler, M., Könözsy, L., Wu, M., Ludwig, A., Mathiesen, R. H., Schaffer, P. & Arnberg, L., 2007, Numerical Study of the Impact of Gravity and Marangoni force on the Droplet Distribution of Hypermonotectic AlBi Alloys. p. 249-253

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  36. Published

    Numerical Study of the Shrinkage Flow Induced Macrosegregation in Continuous Casting of Steel

    Mayer, F., Gruber-Pretzler, M., Wu, M. & Ludwig, A., 2007, Numerical Study of the Shrinkage Flow Induced Macrosegregation in Continuous Casting of Steel. p. 265-270

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  37. Published

    On the Importance of the Electric Currents Flowing directly into the Mould during an ESR Process

    Kharicha, A., Schützenhöfer, W., Ludwig, A., Tanzer, R. & Wu, M., 2007, On the Importance of the Electric Currents Flowing directly into the Mould during an ESR Process. p. 105-110

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  38. Published

    Parameter Study on the Formation of Macrosegregation in a Large Steel Ingot

    Könözsy, L., Mayer, F., Ishmurzin, A., Wu, M., Ludwig, A., Tanzer, R. & Schützenhöfer, W., 2007, Parameter Study on the Formation of Macrosegregation in a Large Steel Ingot. p. 126-132

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  39. Published

    Particle Entrapment in the Mushy Region of a Steel Continuous Caster

    Pfeiler, C., Thomas, B. G., Ludwig, A. & Wu, M., 2007, Particle Entrapment in the Mushy Region of a Steel Continuous Caster. p. 247-252

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  40. Published

    Selected Numerical Investigations on ESR Process

    Kharicha, A., Mackenbrock, A., Ludwig, A., Schützenhöfer, W., Maronnier, V., Wu, M., Köser, O. & Tanzer, R., 2007, Selected Numerical Investigations on ESR Process. p. 113-119

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  41. Published

    The Validation of a Multiphase Model for the Macrosegregations and Primary Structure of High Grade Steel Ingots

    Tanzer, R., Schützenhöfer, W., Reiter, G., Fauland, H. P., Könözsy, L., Ishmurzin, A., Wu, M. & Ludwig, A., 2007, The Validation of a Multiphase Model for the Macrosegregations and Primary Structure of High Grade Steel Ingots. p. 121-126

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  42. Published

    Understanding the Macrosegregation Formation in Steel Castings: Examples of Multiphase Modelling

    Wu, M., Könözsy, L., Fjeld, A. & Ludwig, A., 2007, Understanding the Macrosegregation Formation in Steel Castings: Examples of Multiphase Modelling. p. 114-119

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  43. Published

    Using a Multiphase Approach to Study the Macrosegregation Formation Mechanisms

    Wu, M., Könözsy, L., Fjeld, A. & Ludwig, A., 2007, Using a Multiphase Approach to Study the Macrosegregation Formation Mechanisms. p. 379-387

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  44. Published

    Using a Three-Phase Deterministic Model for the Columnar-to-Equiaxed Transition (CET)

    Wu, M. & Ludwig, A., 2007, In: Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science. 38, p. 1465-1475

    Research output: Contribution to journal › Article › Research › peer-review

  45. 2006
  46. Published

    A mixture two-phase model for predicting macrosegregations during solidification

    Tang, Y., Wu, M. & Ludwig, A., 8 Dec 2006, Modeling of Casting, Welding and Advanced Solidification Processes - XI. Vol. 1. p. 283-290 8 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  47. Published

    Control of interdendritic convection by the application of time-dependent magnetic fields during directional solidification of aluminium alloys

    Hainke, M., Dagner, J., Wu, M. & Ludwig, A., 8 Dec 2006, Modeling of Casting, Welding and Advanced Solidification Processes - XI. Vol. 1. p. 317-324 8 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  48. Published

    Modeling of macrosegregations in DC casting of Bronze

    Gruber-Pretzler, M., Mayer, F., Wu, M., Ludwig, A., Kuhn, H. A. & Riedle, J., 8 Dec 2006, Modeling of Casting, Welding and Advanced Solidification Processes - XI. Vol. 2. p. 799-806 8 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  49. Published

    Multiphase flow simulation of the cooling channel rheocasting process of A356 alloy

    Wang, T., Pustal, B., Wu, M., Bührig-Polaczek, Ludwig, A., Yao, S., Hao, H., Li, T., Cao, Z., Zhang, X. & Jin, J., 8 Dec 2006, Modeling of Casting, Welding and Advanced Solidification Processes - XI. Vol. 2. p. 1071-1078 8 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  50. Published

    Simulation of inclusion and bubble motion in a steel continuous caster

    Pfeiler, C., Wu, M., Ludwig, A., Chimani, C., Watzinger, J. & Dösinger, H., 8 Dec 2006, Modeling of Casting, Welding and Advanced Solidification Processes - XI. Vol. 2. p. 737-744 8 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  51. Published

    Volume averaging concept for mixed columnar-equiaxed solidification

    Wu, M. & Ludwig, A., 8 Dec 2006, Modeling of Casting, Welding and Advanced Solidification Processes - XI. Vol. 1. p. 291-298 8 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  52. Published

    Gravity-induced convection during directional solidification of hypermonotectic alloys

    Ludwig, A., Wu, M., Abondano, M. & Ratke, L., 1 Dec 2006, Solidification and Gravity IV - Proceedings of the 4th International Conference on Solidification and Gravity. p. 193-198 6 p. (Materials Science Forum; vol. 508).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  53. Published

    A three-phase model for mixed columnar-equiaxed solidification

    Wu, M. & Ludwig, A., 1 May 2006, In: Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science. 37.2006, 5, p. 1613-1631 19 p.

    Research output: Contribution to journal › Article › Research › peer-review

  54. Published

    A 3-Phase Model for Mixed Columnar-Equiaxed Solidification

    Wu, M. & Ludwig, A., 2006, In: Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science. 37A, p. 1613-1631

    Research output: Contribution to journal › Article › Research › peer-review

Previous 12 3 4 5 6 7 8 Next
View graph of relations

Contact

Phone: 3103

Latest Research Output

View more (355)