Ivica Duretek

1 - 154 out of 154Page size: 500

Publications / Theses

  1. 2024
  2. Published

    Manufacturing bio-based fiber-reinforced polymer composites: process performance in RTM and VARI processes

    Kirschnick, U., Feuchter, M., Ravindran, B., Salzmann, M., Duretek, I., Fauster, E. & Schledjewski, R., 2024, In: Advanced Manufacturing: Polymer and Composites Science. 10, 1, 2379205.

    Research output: Contribution to journal › Article › Research › peer-review

  3. 2023
  4. Published

    Impact of Multiple Reprocessing on Properties of Polyhydroxybutyrate and Polypropylene

    Main, P., Petersmann, S., Wild, N., Feuchter, M., Duretek, I., Edeleva, M., Ragaert, P., Cardon, L. & Lucyshyn, T., Oct 2023, In: Polymers. 15, 20, 4126.

    Research output: Contribution to journal › Article › Research › peer-review

  5. 2021
  6. Published

    Processability of Different Polymer Fractions Recovered from Mixed Wastes and Determination of Material Properties for Recycling

    Möllnitz, S., Feuchter, M., Duretek, I., Schmidt, G., Pomberger, R. & Sarc, R., 31 Jan 2021, In: Polymers. 13.2021, 3, p. 1-43 43 p., 457.

    Research output: Contribution to journal › Article › Research › peer-review

  7. 2020
  8. Published

    Epoxy-anhydride vitrimers from aminoglycidyl resins with high glass transition temperature and efficient stress relaxation

    Giebler, M., Sperling, C., Kaiser, S., Duretek, I. & Schlögl, S., 17 May 2020, In: Polymers. 12, 5, p. 1 14 p.

    Research output: Contribution to journal › Article › Research › peer-review

  9. 2019
  10. Published

    Determination of residual moisture on four composite films

    Duretek, I. & Winkler, S., 17 Dec 2019, 4 p.

    Research output: Book/Report › Commissioned report › Research

  11. Published

    Material data determination for one MIM-feedstock for injection molding simulation

    Duretek, I., 17 Dec 2019, 13 p.

    Research output: Book/Report › Commissioned report › Research

  12. Published

    Vergleichende Härte-Untersuchungen von zwei unterschiedlichen Granulat-Chargen eines PBT-Compounds

    Duretek, I., 1 Oct 2019, 5 p.

    Research output: Book/Report › Commissioned report › Research

  13. Published

    Bestimmung der Stoffdaten an einem PPE/PS-I-Blend

    Duretek, I., 27 Sept 2019, 9 p.

    Research output: Book/Report › Commissioned report › Research

  14. Published

    Bestimmung der thermodynamischen, rheologischen und mechanischen Stoffdaten an einem PA12

    Duretek, I., 23 Sept 2019, 18 p.

    Research output: Book/Report › Commissioned report › Research

  15. Published

    Bestimmung der thermodynamischen, rheologischen und mechanischen Stoffdaten eines Cyclic Block Copolymer

    Duretek, I., 11 Sept 2019, 15 p.

    Research output: Book/Report › Commissioned report › Research

  16. Published

    Determination of the material data for the PA66-Compound

    Duretek, I., 20 Aug 2019, 16 p.

    Research output: Book/Report › Commissioned report › Research

  17. Published

    Fabrication and properties of extrusion-based 3D-printed hardmetal and cermet components

    Lengauer, W., Duretek, I., Fürst, M., Schwarz, V., Gonzalez-Gutierrez, J., Schuschnigg, S., Kukla, C., Kitzmantel, M., Neubauer, E., Lieberwirth, C. & Morrison, V., 1 Aug 2019, In: International Journal of Refractory Metals and Hard Materials. 82.2019, August, p. 141-149 9 p.

    Research output: Contribution to journal › Article › Research › peer-review

  18. Published

    Investigations of rheological behaviour of two PIM-feedstocks (Catamold 17-4PH)

    Duretek, I., 30 Jul 2019, 13 p.

    Research output: Book/Report › Commissioned report › Research

  19. Published

    Determination of the material data for one TPU-compound

    Duretek, I., 24 Jul 2019, 16 p.

    Research output: Book/Report › Commissioned report › Research

  20. Published

    Determination of the material data for ZY-Feedstock

    Duretek, I., 1 Jul 2019, 15 p.

    Research output: Book/Report › Commissioned report › Research

  21. Published

    Vergleichende REM-Analyse vier verschiedenen PP-Extrudaten

    Duretek, I., 28 Jun 2019, 11 p.

    Research output: Book/Report › Commissioned report › Research

  22. Published

    Determination of the material data for PIM-feedstock "2"

    Duretek, I., 12 Jun 2019, 21 p.

    Research output: Book/Report › Commissioned report › Research

  23. Published

    Bestimmung der thermodynamischen, rheologischen und mechanischen Stoffdaten für PP EPDM T20

    Duretek, I., 25 May 2019, 21 p.

    Research output: Book/Report › Commissioned report › Research

  24. Published

    Microscopic examination of 3 melt filter

    Duretek, I., 22 May 2019, 25 p.

    Research output: Book/Report › Commissioned report › Research

  25. Published

    Determination of the material data for the CIM-feedstock "1"

    Duretek, I., 15 May 2019, 18 p.

    Research output: Book/Report › Commissioned report › Research

  26. Published

    Determination of the material data for the PIM-feedstock "2"

    Duretek, I., 15 May 2019, 20 p.

    Research output: Book/Report › Commissioned report › Research

  27. Published

    Determination of the material data for the CIM-feedstock "3"

    Duretek, I., 30 Apr 2019, 17 p.

    Research output: Book/Report › Commissioned report › Research

  28. Published

    Aktuelle Entwicklungen in der Simulation des Pulverspritzgießprozesses

    Lucyshyn, T., Hubmann, M., Duretek, I. & Holzer, C., 25 Apr 2019, Simulation in der Kunststofftechnik. Schuecker, C. (ed.). Leoben, Vol. Band 9. p. 101-103 3 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  29. Published

    Determination of the material data for the CIM-feedstock "2"

    Duretek, I., 4 Apr 2019, 17 p.

    Research output: Book/Report › Commissioned report › Research

  30. Published

    Bestimmung der thermodynamischen und rheologischen Stoffdaten für ein gefülltes Polypropylen

    Duretek, I., 28 Mar 2019, 10 p.

    Research output: Book/Report › Commissioned report › Research

  31. Published

    Filament-extrusion 3D printing of hardmetal and cermet parts

    Lengauer, W., Duretek, I., Fürst, M., Gonzalez-Gutierrez, J., Schuschnigg, S. & Kukla, C., 25 Mar 2019, p. 77-78. 2 p.

    Research output: Contribution to conference › Paper › peer-review

  32. Published

    Bestimmung der thermodynamischen und rheologischen Stoffdaten für ein ungefülltes Polypropylen

    Duretek, I., 14 Mar 2019, 11 p.

    Research output: Book/Report › Commissioned report › Research

  33. Published

    Vergleichende MFR Messungen an 6 PP Proben mit unterschiedlicher thermomechanischer Vorgeschichte

    Duretek, I. & Wallner, A., 14 Mar 2019, 4 p.

    Research output: Book/Report › Commissioned report › Research

  34. Published

    Bestimmung der thermodynamischen, rheologischen und mechanischen Stoffdaten für ein PBT-Compound

    Duretek, I., 18 Feb 2019, 19 p.

    Research output: Book/Report › Commissioned report › Research

  35. Published

    Bestimmung der Viskosität an zwei Polyvinylidenfluoriden

    Duretek, I., 6 Feb 2019, 5 p.

    Research output: Book/Report › Commissioned report › Research

  36. Published

    Bestimmung der Materialdaten an einem PA6

    Duretek, I., 4 Feb 2019, 20 p.

    Research output: Book/Report › Commissioned report › Research

  37. Published

    Die rheologischen Stoffdatenbestimmung für zwei thermoplastischen Compounds (PPS- und PA12-Blends)

    Duretek, I., 27 Jan 2019

    Research output: Book/Report › Commissioned report › Research

  38. 2018
  39. Published

    Vergleichende rheologische Messungen an Proben aus einem ABS-, POM-, PP- und PA6-Compound

    Duretek, I., 12 Dec 2018, 12 p.

    Research output: Book/Report › Commissioned report › Research

  40. Published

    Bestimmung der thermischen und rheologischen Stoffdaten für ein Wachs der Type Gemisch 75/25

    Duretek, I., 16 Nov 2018, 10 p.

    Research output: Book/Report › Commissioned report › Research

  41. Published

    Viscoelastic Material Characterization and Modelling of Industrial Rubber Compounds - K-BKZ Model

    Stieger, S., Kerschbaumer, R. C., Haselmann, M., Berger-Weber, G., Fasching, M., Duretek, I., Schuschnigg, S. & Friesenbichler, W., 7 Nov 2018.

    Research output: Contribution to conference › Abstract › peer-review

  42. Published

    Bestimmung der rheologischen Stoffdaten an fünf verschiedenen thermoplastischen Compounds

    Duretek, I., 10 Oct 2018, 7 p.

    Research output: Book/Report › Commissioned report › Research

  43. Published

    Bestimmung der thermodynamischen und mechanischen Stoffdaten für ein PC-Compound

    Duretek, I., 10 Oct 2018, 18 p.

    Research output: Book/Report › Commissioned report › Research

  44. Published

    Rheology of Highly Filled Polymers

    Kukla, C., Duretek, I., Gonzalez-Gutierrez, J. & Holzer, C., 3 Oct 2018, Polymer Rheology. Rivera-Armenta, J. L. & Salazar-Cruz, B. A. (eds.). London, United Kingdom, p. 153- 173 21 p.

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research

  45. Published

    Viskositätsmessungen an drei PVC-Compounds

    Duretek, I., 1 Oct 2018, 18 p.

    Research output: Book/Report › Commissioned report › Research

  46. Published

    Potential of Extrusion Based 3D-printed Hardmetal and Cermet Parts

    Kitzmantel, M., Lengauer, W., Duretek, I., Schwarz , V., Kukla, C., Lieberwirth, C., Morrison, V., Wilfinger, T. & Neubauer, E., 30 Sept 2018, p. 938-945. 7 p.

    Research output: Contribution to conference › Paper › peer-review

  47. Published

    Bestimmung der Stoffdaten an einem PC/ABS-Blend

    Duretek, I., 14 Sept 2018, 11 p.

    Research output: Book/Report › Commissioned report › Research

  48. Published

    Bestimmung der thermodynamischen, rheologischen und mechanischen Stoffdaten an einem PBT "1"

    Duretek, I., 23 Aug 2018, 16 p.

    Research output: Book/Report › Commissioned report › Research

  49. Published

    Bestimmung der thermodynamischen, rheologischen und mechanischen Stoffdaten für PA 6.6

    Duretek, I., 23 Aug 2018, 19 p.

    Research output: Book/Report › Commissioned report › Research

  50. Published

    Vergleichende DSC-Untersuchungen von 3 verschiedenen Dichtungsringen

    Duretek, I., 11 Aug 2018, 10 p.

    Research output: Book/Report › Commissioned report › Research

  51. Published

    Bestimmung der thermodynamischen, rheologischen und mechanischen Stoffdaten an einem PBT "2"

    Duretek, I., 11 Jul 2018, 15 p.

    Research output: Book/Report › Commissioned report › Research

  52. Published

    Bestimmung der rheologischen und thermodynamischen Stoffdaten an einem MIM-Feedstock der Type PM

    Duretek, I., 10 Jul 2018, 16 p.

    Research output: Book/Report › Commissioned report › Research

  53. Published

    Determination of the pvT behavior for one moldable silicone

    Duretek, I., 29 Jun 2018, 8 p.

    Research output: Book/Report › Commissioned report › Research

  54. Published

    Rheological characterization of the four fluoropolymers on the rotational rheometer

    Duretek, I., 29 Jun 2018, 9 p.

    Research output: Book/Report › Commissioned report › Research

  55. Published

    Viskositätsmessungen an einem PA6-Compound

    Duretek, I., 21 Jun 2018, 6 p.

    Research output: Book/Report › Commissioned report › Research

  56. Published

    Bestimmung der thermodynamischen, rheologischen und mechanischen Stoffdaten für einen MIM-Feedstock

    Duretek, I., 13 Jun 2018, 20 p.

    Research output: Book/Report › Commissioned report › Research

  57. Published

    Bestimmung der thermodynamischen und mechanischen Stoffdaten für ein PA6-Compound

    Duretek, I., 28 May 2018, 15 p.

    Research output: Book/Report › Commissioned report › Research

  58. Published

    Viskositätsmessungen an 8 Versuchsmustern aus Polypropylen

    Duretek, I., 25 May 2018, 8 p.

    Research output: Book/Report › Commissioned report › Research

  59. Published

    Bestimmung der thermodynamischen, rheologischen und mechanischen Stoffdaten für PP LGF

    Duretek, I., 16 May 2018, 26 p.

    Research output: Book/Report › Commissioned report › Research

  60. Published

    Bestimmung der thermodynamischen und mechanischen Stoffdaten für ein PBT-Compound PBT GF 30

    Duretek, I., 27 Apr 2018, 16 p.

    Research output: Book/Report › Commissioned report › Research

  61. Published

    Herstellung eines thermoplastischen Blends und dessen rheologische und thermodynamische Analyse

    Duretek, I., 27 Apr 2018, 8 p.

    Research output: Book/Report › Commissioned report › Research

  62. Published

    Bestimmung der thermodynamischen Stoffdaten für ein TPU-Compound der Type

    Duretek, I., 13 Mar 2018, 11 p.

    Research output: Book/Report › Commissioned report › Research

  63. Published

    Bestimmung der rheologischen Stoffdaten für ein TPU-Compound mit Farbmasterbatch

    Duretek, I., 9 Mar 2018, 8 p.

    Research output: Book/Report › Commissioned report › Research

  64. Published

    Determination of the pvT-behaviour for two pharmaceutical mixtures

    Duretek, I. & Winkler, S., 15 Feb 2018, 6 p.

    Research output: Book/Report › Commissioned report › Research

  65. Published

    Bestimmung der thermodynamischen Stoffdaten für ein TPO-Compound

    Duretek, I., 8 Feb 2018, 8 p.

    Research output: Book/Report › Commissioned report › Research

  66. 2017
  67. Published

    FILLER CONTENT AND PROPERTIES OF HIGHLY FILLED FILAMENTS FOR FUSED FILAMENT FABRICATION OF MAGNETS

    Gonzalez-Gutierrez, J., Duretek, I., Arbeiter, F., Kukla, C. & Holzer, C., 9 May 2017, ANTEC® 2017. Anaheim, California, USA, 4 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  68. Published

    Filling behaviour of wood plastic composites

    Duretek, I., Lucyshyn, T. & Holzer, C., 16 Feb 2017, In: Journal of Physics: Conference Series. 790, 1, 012006.

    Research output: Contribution to journal › Conference article › peer-review

  69. Published

    Rheology of PIM feedstocks

    Kukla, C., Duretek, I., Gonzalez-Gutierrez, J. & Holzer, C., 9 Feb 2017, In: Metal Powder Report. 72, 1, p. 39-44 6 p.

    Research output: Contribution to journal › Article › Research

  70. Published

    Effect of Particle Size on the Properties of Highly-Filled Polymers for Fused Filament Fabrication

    Kukla, C., Gonzalez-Gutierrez, J., Duretek, I., Schuschnigg, S. & Holzer, C., 2017.

    Research output: Contribution to conference › Paper › peer-review

  71. Published

    Material Flow Data for Numerical Simulation of Powder Injection Molding

    Duretek, I. & Holzer, C., 2017, In: Universal Journal of Materials Science. 5, 1, p. 7-14 7 p.

    Research output: Contribution to journal › Article › Research › peer-review

  72. 2016
  73. Published

    Controlled shear stress method to measure yield stress of highly filled polymer melts

    Kukla, C., Duretek, I. & Holzer, C., 31 Oct 2016, Proceedings of the Regional Conference Graz 2015 - Polymer Processing Society PPS: Conference Papers. Vol. 1779. 070006

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  74. Published

    Properties for PIM Feedstocks Used in Fused Filament Fabrication

    Kukla, C., Duretek, I., Schuschnigg, S., Gonzalez-Gutierrez, J. & Holzer, C., 9 Oct 2016, World PM2016 Congress & Exhibition. Petzoldt, F. (ed.). Hamburg, Germany: European Powder Metallurgy Association, p. 1-5 5 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  75. Published

    Effect of Particle Size on the Properties of Highly-Filled Polymers for Fused Filament Fabrication

    Holzer, C., Kukla, C., Duretek, I., Schuschnigg, S. & Gonzalez-Gutierrez, J., 28 Jul 2016.

    Research output: Contribution to conference › Presentation › Research

  76. Published

    Effect of Particle Size on the Properties of Highly-Filled Polymers for Fused Filament Fabrication

    Kukla, C., Duretek, I., Schuschnigg, S., Gonzalez-Gutierrez, J. & Holzer, C., 25 Jul 2016, p. 299. 1 p.

    Research output: Contribution to conference › Abstract

  77. Published

    Effect of Particle Size on the Properties of Highly-Filled Polymers for Fused Filament Fabrication

    Kukla, C., Duretek, I., Schuschnigg, S., Gonzalez-Gutierrez, J. & Holzer, C., 25 Jul 2016, 32nd International Conference of the POLYMER PROCESSING SOCIETY. Maazouz, A. (ed.). Lyon, France, Vol. 32. 4 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  78. Published

    Models to Predict the Viscosity of Metal Injection Molding Feedstock Materials as Function of Their Formulation

    Gonzalez-Gutierrez, J., Duretek, I., Kukla, C., Poljšak, A., Bek, M., Emri, I. & Holzer, C., 28 May 2016, In: Metals : open access journal . 6, 6, p. 129- 146 17 p.

    Research output: Contribution to journal › Article › Research › peer-review

  79. Published

    Rheometry of Polymer Melt using Processing Machines

    Friesenbichler, W., Neunhäuserer, A. & Duretek, I., 19 May 2016, p. 2-5. 4 p.

    Research output: Contribution to conference › Presentation › Research › peer-review

  80. Published

    Fused Filament Fabrication for Metallic Parts

    Gonzalez-Gutierrez, J., Kukla, C., Schuschnigg, S., Duretek, I. & Holzer, C., 14 Apr 2016, 25. Leobener Kunststoff-Kolloquium: Kunststoffgerechte Bauteilentwicklung- vom Werkstoff zum Produkt. Pinter, G. & Pilz, G. (eds.). Leoben, Austria, Vol. 25. p. 187-188 2 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  81. Published

    Neue additive Produktionstechnologien für die Holzindustrie

    Duretek, I., Müller, U., Veigel, S., Haider, A., Frybort, S. & Holzer, C., 14 Apr 2016, p. 185-186. 2 p.

    Research output: Contribution to conference › Abstract

  82. Published

    Neue additive Produktionstechnologien für die Holzindustrie

    Duretek, I., Müller, U., Veigel, S., Haider, A., Frybort, S. & Holzer, C., 14 Apr 2016. 1 p.

    Research output: Contribution to conference › Poster › Research

  83. Published

    Fused Filament Fabrication for Metallic Parts

    Gonzalez-Gutierrez, J., Kukla, C., Schuschnigg, S., Duretek, I. & Holzer, C., Apr 2016, p. 1.

    Research output: Contribution to conference › Poster › Research

  84. Published

    Filling Behavior of Wood Plastic Composites

    Duretek, I., Lucyshyn, T. & Holzer, C., 2016, In: Journal of Civil Engineering and Architecture. 10, p. 1236-1243 7 p.

    Research output: Contribution to journal › Article › Research › peer-review

  85. Published

    Rheometry of polymer melts using processing machines

    Friesenbichler, W., Neunhäuserer, A. & Duretek, I., 2016, In: Korea-Australia Rheology Journal. 28, 3, p. 167-174 8 p.

    Research output: Contribution to journal › Article › Research › peer-review

  86. Published

    Rheometry of Polymer Melt using Processing Machines

    Friesenbichler, W., Neunhäuserer, A. & Duretek, I., 2016, The 16th Internaional Symposium on Applied Rheology (ISAR). Korea, p. 2-5 4 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  87. 2015
  88. Published

    Study of rheological behaviour of stainless steel feedstock taking into account the thermal effects

    Kukla, C., Duretek, I., Schuschnigg, S., Gonzalez-Gutierrez, J., Gooneie, A. & Holzer, C., 30 Nov 2015, IBEREO’15 IBERIAN RHEOLOGY CONFERENCE. Rasteiro, M. G. (ed.). Coimbra, Portugal: Universidad Nacional de Colombia, p. 50-53 4 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  89. Published

    Fließverhalten hochgefüllter Kunststoffe

    Duretek, I., 26 Nov 2015, 24. Leobener Kunststoff-Kolloquium. Leoben, p. 57-74

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  90. Published

    Filling behaviour of wood plastic composites

    Duretek, I., 7 Oct 2015, p. 47. 1 p.

    Research output: Contribution to conference › Presentation › Research

  91. Published

    Filling behaviour of wood plastic composites

    Duretek, I., Lucyshyn, T. & Holzer, C., 7 Oct 2015, p. 47. 1 p.

    Research output: Contribution to conference › Abstract

  92. Published

    Material data for numerical simulation of powder in jection molding

    Duretek, I., 6 Oct 2015, p. 154. 1 p.

    Research output: Contribution to conference › Presentation › Research

  93. Published

    Rheological Behaviour of Bronze Feedstocks at Low Shear Rates

    Kukla, C., Duretek, I., Gonzalez-Gutierrez, J. & Holzer, C., 14 Sept 2015, Euro PM2015 Congress Proceedings. Reims, France: European Powder Metallurgy Association, 6 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  94. Published

    Correlation between Rheotens measurements and reinforcement of polymer nanocomposites in the injection molding compounder

    Battisti, M. G., Friesenbichler, W., Duretek, I. & Guttmann, P., 15 Apr 2015, In: Journal of physics / Conference series. 602, 1, 012012.

    Research output: Contribution to journal › Article › Research › peer-review

  95. Published

    Numerical simulations of the flow of wood polypropylene composites with wall slipping in a profile die: The significance of material data

    Gooneie, A., Schuschnigg, S., Duretek, I. & Holzer, C., 2015, In: AIP Conference Proceedings. 1664, 1

    Research output: Contribution to journal › Article › Research › peer-review

  96. Published

    Rheological properties of wood polymer composites and their role in extrusion

    Duretek, I., Schuschnigg, S., Gooneie, A., Langecker, G. & Holzer, C., 2015, In: Journal of physics / Conference series. 602, 1, 9 p.

    Research output: Contribution to journal › Article › Research › peer-review

  97. Published

    Rheologie für den Kunststoffverarbeiter

    Duretek, I., 2015, VDI Wissensforum - EXTRUSIONSWERKZEUGE FÜR PROFILE UND ROHRE (03FO010005), 29. und 30. September 2015. Karlsruhe, 25 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  98. 2014
  99. Published

    Modelling of Rheological Behaviour of 316L Feedstocks with Different Powder Loadings and Binder Compositions

    Kukla, C., Duretek, I. & Holzer, C., 2014, Proceedings of the EuroPM2014 Conference. p. 1-6

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  100. Published

    Numerical Simulations of the Flow of Wood Polypropylene Composites with Wall Slipping in a Profile Die: The Significance of Material Data

    Gooneie, A., Schuschnigg, S., Duretek, I. & Holzer, C., 2014, Proceedings of 30th International Conference of the Polymer Processing Society (PPS-30). p. 401-405

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  101. Published

    The effect of pre -shear history on the rheological behavior of Wood Plastic Composites

    Duretek, I. & Holzer, C., 2014, Proceedings of the 30th Annual Meeting of the Polymer Processing Society. p. 300-300

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  102. Published

    Tribological Investigations of Polyamide Nanocomposites

    Witschnigg, A., Laske, S., Duretek, I., Holzer, C., Chitu, L. & Bodner, S., 2014, Proceedings of the 30th Annual Meeting of the Polymer Processing Society. p. 756-756

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  103. 2013
  104. Published

    Correlation between Rheotens Measurements and Reinforcement of Polymer Nanocomposites in the Injection Molding Compounder

    Battisti, M., Duretek, I., Friesenbichler, W., Guttmann, P. & Pinter, G., 2013, 1st International Conference on Rheology and Modelling of Materials - Book of Abstracts. p. 39-39

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  105. Published

    Investigation of the influence of processing conditions on the thermal, rheological and mechanical behavior of polypropylene nanocomposites

    Mattausch, H., Laske, S., Duretek, I., Kreith, J., Maier, G. & Holzer, C., 2013, In: Polymer engineering and science. 53, p. 1001-1010

    Research output: Contribution to journal › Article › Research › peer-review

  106. Published

    Measurement of the yield stress of a stainless steel feedstock

    Duretek, I., Kukla, C., Langecker, G. & Holzer, C., 2013, Euro PM2013 Proceedings Volume 1. p. 1-6

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  107. Published

    Measurement of the yield stress of a stainless steel feedstock

    Duretek, I., 2013.

    Research output: Contribution to conference › Poster › Research › peer-review

  108. Published

    Rheological behaviour of binder systems for PIM and mixing rules for calculation of viscosity

    Kukla, C., Duretek, I. & Holzer, C., 2013, EuroPM 2013 Proceedings. p. x-x

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  109. Published

    Rheological properties of wood polymer composites and their role in extrusion

    Duretek, I., Schuschnigg, S., Gooneie, A., Langecker, G. & Holzer, C., 2013, The 1st International Conference on Rheology and Modeling of Materials, Book of Abstracts. p. 36-36

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  110. Published

    Untersuchungen zum Fließverhalten von Metall-, Keramik- und Holz-Kunststoffverbunden

    Duretek, I., 2013, 243 p.

    Research output: Thesis › Doctoral Thesis

  111. 2012
  112. Published

    Einfluss von Schichtsilkaten auf die Wärmeleitfähigkeit von polymeren Nanocomposites

    Laske, S., Witschnigg, A., Duretek, I., Mattausch, H., Tscharnutter, D. & Holzer, C., 2012, Mit Compoundieren zum Erfolg. p. 97-104

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  113. Published

    Influence of the degree of exfoliation on the thermal conductivity of polypropylene nanocomposites

    Laske, S., Duretek, I., Witschnigg, A., Mattausch, H., Tscharnuter, D. & Holzer, C., 2012, In: Polymer engineering and science. 52, p. 1479-1753

    Research output: Contribution to journal › Article › Research › peer-review

  114. Published

    Investigation of rheological, thermal and mechanical properties of expanded perlite/polypropylene composites

    Mattausch, H., Laske, S., Duretek, I., Cirar, K., Flachberger, H. & Holzer, C., 2012, The 28th International Conference of The Polymer Processing Society (PPS-28) Proceedings. p. 235-239

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  115. Published

    Investigation of rheological, thermal and mechanical properties of expanded perlite/polypropylene composites

    Mattausch, H., Laske, S., Duretek, I., Cirar, K., Flachberger, H. & Holzer, C., 2012.

    Research output: Contribution to conference › Poster › Research › peer-review

  116. Published

    Rheologie von Kunststoffschmelzen

    Duretek, I. & Schuschnigg, S., 2012, VDI Wissensforum, Extrusionswerkzeuge für Rohre und Profile. p. 1-32

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  117. Published

    Rheology of wood plastics composites using by-pass-extrusion-rheometer on the twin screw extruder

    Duretek, I., Selvasankar, R. K., Langecker, G. & Holzer, C., 2012, 9th WPC, Natural Fibre and other innovative Composites Congress and Exhibition. p. A5-1-A5-8

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  118. 2011
  119. Published

    A new injection moulding machine rheometer to study the rheological behaviour of polymer melts at very high shear-rates

    Selvasankar, R. K., Duretek, I., Friesenbichler, W. & Holzer, C., 2011.

    Research output: Contribution to conference › Poster › Research › peer-review

  120. Published

    Effect of physical vapour deposition coating on the flow properties of the thermoplastics and wood plastic composites

    Duretek, I., Selvasankar, R. K. & Holzer, C., 2011,

    Program & Abstracts of 27th Annual Meeting of the Polymer Processing Society

    .     p. 236-236

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  121. Published

    Influence of induced shear energy and residence time on material properties of polypropylene nanocomposites

    Witschnigg, A., Laske, S., Duretek, I. & Holzer, C., 2011,

    Program & Abstracts of 27th Annual Meeting of the Polymer Processing Society

    .     p. 150-151

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  122. Published

    Influence of processing conditions and induced shear work on the thermal, rheological and mechanical behavior of polymer nanocomposites

    Mattausch, H., Laske, S., Duretek, I., Witschnigg, A. & Holzer, C., 2011,

    Program & Abstracts of 27th Annual Meeting of the Polymer Processing Society

    .     p. 157-158

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  123. Published

    Influence of the degree of exfoliation on the thermal conductivity of polypropylene nanocomposites

    Laske, S., Duretek, I., Witschnigg, A. & Holzer, C., 2011,

    Program & Abstracts of 27th Annual Meeting of the Polymer Processing Society

    .     p. 155-155

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  124. Published

    Measuring the pressure dependent viscosity at high shear rates using a new rheological injection mould

    Friesenbichler, W., Duretek, I., Rajganesh Jegadeesan, X. & Selvasankar, R. K., 2011, In: Polimery/Polymers. 56, 1, p. 58-62

    Research output: Contribution to journal › Article › Research › peer-review

  125. 2010
  126. Published

    Influence of molecular structure on the extensional behaviour of polyethylene melts

    Duretek, I., Florian, M. & Holzer, C., 2010, Book of Abstracts of ASPM 2010 Austrian-Slovenian Polymer Meeting. p. 130-130

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  127. Published

    Influence of molecular structure on the extensional behaviour of polyethylene melts

    Duretek, I., Florian, M. & Holzer, C., 2010.

    Research output: Contribution to conference › Poster › Research › peer-review

  128. Published

    New Insights into Characterization of Flow Properties of PP Based Wood Platic Composites

    Duretek, I., 2010.

    Research output: Contribution to conference › Poster › Research › peer-review

  129. Published

    Praxisnahe Viskositäten für die Simulation

    Friesenbichler, W., Duretek, I. & Rajganesh Jegadeesan, X., 2010, In: Kunststoffe. 3, p. 37-40

    Research output: Contribution to journal › Article › Research › peer-review

  130. 2009
  131. Published

    Measurement of pressure dependent viscosity and its influence on injection moulding simulation

    Holzer, C., Lucyshyn, T., Friesenbichler, W. & Duretek, I., 2009,

    Programme & Abstracts of PPS 2009

    .     p. 153-153

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  132. Published

    New Rheological Injection Mould to Measure Pressure Dependent Viscosity in High Shear Rate Range

    Friesenbichler, W., Rajganesh Jegadeesan, X., Duretek, I. & Ramesh Kumar, S., 2009,

    PPS-25 Program & Abstracts

    .     p. 185-185

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  133. Published

    PIM - Feedstocks

    Duretek, I., 2009.

    Research output: Contribution to conference › Poster › Research › peer-review

  134. Published

    Pressure dependent viscosity and its importance for injection molding simulations

    Rajganesh Jegadeesan, X., Friesenbichler, W., Duretek, I., Filz, P. & Webelhaus, K., 2009, Conference Proceedings. p. 217-222

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  135. Published

    Rheologische Analyse

    Duretek, I., 2009.

    Research output: Contribution to conference › Poster › Research › peer-review

  136. Published

    Temperature and Pressure Dependence of Thermal Conductivity of Polypropylene Filled with Micro-Scale Fillers

    Duretek, I., Friesenbichler, W. & Kucher, C., 2009.

    Research output: Contribution to conference › Poster › Research › peer-review

  137. Published

    Temperature and Pressure Dependence of Thermal Conductivity of Polypropylene Filled with Micro-Scale Fillers

    Duretek, I., Friesenbichler, W. & Kucher, C., 2009, Proceedings of a Conference on Polyolefins and Polymelamines. p. 96-98

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  138. Published

    Thermal Conductivity of Talc Filled Polypropylene Measured at High Pressures

    Duretek, I., Friesenbichler, W. & Kucher, C., 2009, PPS-25 Program & Abstracts . p. 135-135

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  139. Published

    Thermal Conductivity of Talc Filled Polypropylene Measured at High Pressures: 25th Annual Meeting of the Polymer Processing Society

    Duretek, I., Friesenbichler, W. & Kucher, C., 2009

    Research output: Non-textual form › Web publication/site › Research

  140. Published

    Viskositätsdaten für die Spritzgieß-Simulation

    Duretek, I., 2009.

    Research output: Contribution to conference › Poster › Research › peer-review

  141. 2008
  142. Published

    New Insights into Feedstock Behaviour and Injection Moulding Simulation for PIM

    Kukla, C., Duretek, I., Friesenbichler, W. & Thornagel, M., 2008, Euro PM2008 Proceedings Vol 2. p. 287-292

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  143. 2007
  144. Published

    Investigations of the Rheology and Reactivity of Extrudable Wood-Resin Compounds

    Braun, J., Duretek, I., Müller, U., Friesenbichler, W. & Endesfelder, A., 3 Apr 2007, In: Monatshefte für Chemie = Chemical monthly. 138.2007, p. 337-341 5 p.

    Research output: Contribution to journal › Article › Research › peer-review

  145. Published

    Simulation des spritzgießprozesses von mikrobauteilen

    Cramer, A., Michaeli, W., Friesenbichler, W. & Duretek, I., 1 Jan 2007, In: Zeitschrift Kunststofftechnik = Journal of plastics technology. 1

    Research output: Contribution to journal › Article › Research › peer-review

  146. Published

    Simulation der Spritzgießprozesses von Mikrobauteilen

    Cramer, A., Michaeli, W., Friesenbichler, W. & Duretek, I., 2007, In: Zeitschrift Kunststofftechnik : Journal of plastics technology. 3, p. 1-26

    Research output: Contribution to journal › Article › Research › peer-review

  147. 2006
  148. Published

    Influence of pvT-Data Measured at High Cooling Rates on Injection Molding Simulation Results

    Lucyshyn, T., Duretek, I., Langecker, G. & Fischer, K., 2006, Program and Abstracts of the 22nd Annual Meeting of the Polymer Processing Society, Yamagata, Japan 2006. p. 237-237

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  149. Published

    Influence of pvT-Data Measured at High Cooling Rates on Injection Molding Simulation Results: 22nd Annual Meeting of the Polymer Processing Society, Conference Proceedings

    Langecker, G., Lucyshyn, T., Fischer, K. & Duretek, I., 2006

    Research output: Non-textual form › Web publication/site › Research

  150. Published

    Investigation of the rheology and reactivity of extrudable wood-resin-compounds

    Braun, J., Duretek, I., Müller, U., Friesenbichler, W. & Endesfelder, A., 2006.

    Research output: Contribution to conference › Poster › Research › peer-review

  151. Published

    Spritzgießsimulation - Einfluss der Stoffdaten auf die Vorhersage von Schwindung und Verzug

    Lucyshyn, T., Duretek, I., Fischer, K. & Langecker, G., 2006, 19. Leobener Kunststoff Kolloquium - Spritzgieß- und Extrusionstechnik - Innovationen aus Industrie und Forschung. p. 1-17

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  152. Published

    Stoffdaten für die Simulation

    Duretek, I., 2006.

    Research output: Contribution to conference › Poster › Research › peer-review

  153. Published

    Study on rheological behaviour of polymer melts at high shear rates using a new micro-rheology technique

    Duretek, I., Friesenbichler, W., Schuschnigg, S., Jegadeesan, R. & Langecker, G., 2006, Past and future of polymer engineering technology and science. p. 117-130

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  154. Published

    Study on rheological behaviour of polymer melts at increased pressure levels with the consideration of the compression heat

    Rajganesh Jegadeesan, X., Friesenbichler, W., Duretek, I., Schuschnigg, S. & Langecker, G., 2006, The Chain of Knowledge - From Catalyst to Application. p. 1-1

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  155. Published

    Viskositätsmessungen bei extrem hohen Schergeschwindigkeiten unter Berücksichtigung von Schererwärmung und Druckeinfluss

    Duretek, I., Friesenbichler, W., Schuschnigg, S. & Rajganesh Jegadeesan, X., 2006, 19. Leobener Kunststoff Kolloquium - Spritzgieß- und Extrusionstechnik - Innovationen aus Industrie und Forschung. p. 1-20

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  156. 2005
  157. Published

    Investigation of Flow Behaviour of Extrudable Wood/Melamine Resin Composites

    Nguyen, H. L., Duretek, I., Müller, U., Friesenbichler, W. & Endesfelder, A., 2005.

    Research output: Contribution to conference › Poster › Research › peer-review

  158. Published

    Investigation of Flow Behaviour of Extrudable Wood/Melamine Resin Composites

    Nguyen, H. L., Duretek, I., Müller, U., Friesenbichler, W. & Endesfelder, A., 2005, Proceedings of the 2nd Annual European Rheology Conference. p. ---

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  159. Published

    Polymer Melt Rheology at High shear rates Using a New Micro-Rheology Technique,

    Friesenbichler, W., Langecker, G., Duretek, I. & Schuschnigg, S., 2005, Proceeding of the 21st Annual Meeting of the Polymer Processing Society. p. 87--

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  160. 2004
  161. Published

    Rheological Characterization of Extrudable Wood/Melamine Resin Composites

    Müller, U., Nguyen, H. L., Rätzsch, M., Duretek, I. & Friesenbichler, W., 2004.

    Research output: Contribution to conference › Poster › Research › peer-review

  162. 2003
  163. Published

    By-Pass-Extrusionsrheometer - Bestimmung des Fließverhaltens von PVC-U Compounds

    Duretek, I. & Langecker, G., 2003, In: VLK-News. p. 33-37

    Research output: Contribution to journal › Article › Research › peer-review

  164. 2002
  165. Published

    Characterisation of the thermo-oxidative degradation of polyethylene pipes by chromatographical, rheological and thermo-analytical methods

    Pinter, G., Duretek, I., Aust, N. & Lang, R. W., 24 Jun 2002, In: Macromolecular Symposia. 181, p. 213-223 11 p.

    Research output: Contribution to journal › Article › Research › peer-review

  166. Published

    Characterisation of the Thermo-Oxidative Degradation of Polyethylene Pipes by Chromatographical, Rheological and Thermoanalytical Methods

    Pinter, G., Duretek, I., Aust, N. & Lang, R., 2002, In: Macromolecular Symposia. 181, p. 213-213

    Research output: Contribution to journal › Article › Research › peer-review

  167. 1998
  168. Published

    Alternative Verfahren zur schnellen Herstellung von Prototypenwerkzeugen

    Duretek, I. & Santek, D., 1998, In: Stahl : Zeitschrift für den High-Tech-Werkstoff . 6, p. 30-32

    Research output: Contribution to journal › Article › Research › peer-review

  169. Published

    Rheological measurements on the by-pass-extrusion rheometer at flexible polyvinylchloride

    Duretek, I., Friesenbichler, W. & Langecker, G., 1998, Application and processing of plastics and rubber. p. 31-35

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  170. 1997
  171. Published

    Die Rapid Prototyping Verfahren und ihre Abgrenzung zueinander

    Duretek, I. & Santek, D., 1997, In: GAK (Gummi Fasern Kunststoffe). 50, p. 852-861

    Research output: Contribution to journal › Article › Research › peer-review

  172. Published

    Prototypen mittels Rapid Prototyping Verfahren

    Duretek, I. & Santek, D., 1997, In: Metall. 51, p. 726-729

    Research output: Contribution to journal › Article › Research › peer-review

  173. Published

    Rapid Tooling - Verfahren zur Herstellung metallischer Bauteile und Prototypen Werkzeuge

    Duretek, I. & Santek, D., 1997, In: Österreichische Kunststoff-Zeitschrift. 28, p. 184-190

    Research output: Contribution to journal › Article › Research › peer-review

  174. Published

    Rheological properties of polymer melts

    Duretek, I., 1997, MATEST '97, International conference 'material testing'. p. 255-262

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  175. Published

    Rheological properties of polymer melts

    Duretek, I., 1997.

    Research output: Contribution to conference › Poster › Research › peer-review

  176. 1996
  177. Published

    Auswirkung der Versuchsparameter auf die Meßergebnisse von p-v-T-Diagrammen für Thermoplaste und Kautschuke

    Duretek, I., Langecker, G. & Friesenbichler, W., 1996, In: Polimeri. 17, p. 177-182

    Research output: Contribution to journal › Article › Research › peer-review

  178. Published

    Rapid Prototyping schneller Modellbau aus CAD-Daten

    Santek, D. & Duretek, I., 1996, In: Österreichische Kunststoff-Zeitschrift. 27, p. 82-85

    Research output: Contribution to journal › Article › Research › peer-review

  179. 1995
  180. Published

    Auswirkung der Versuchsparameter auf die Messergebnisse von pvT-Diagrammen für Thermoplaste und Kautschuke

    Duretek, I., Langecker, G. & Friesenbichler, W., 1995, 13.Days of Plastics and Rubber Engineers Society. p. 66-69

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

View graph of relations

Contact

Phone: 3518

Latest Research Output

View more (154)