Gregor Karl Mori

1 - 100 out of 216Page size: 100

Publications / Theses

  1. 2021
  2. Published

    Corrosion of stainless steel by urea at high temperature

    Galakhova, A., Mori, G. K., Kadisch, F., Heyder, S., Wieser, H., Sartory, B. & Burger, S., 9 Sept 2021, In: Corrosion and materials degradation. 2, 3

    Research output: Contribution to journal › Article › Research › peer-review

  3. E-pub ahead of print

    Effect of Varying H2S Content on High-Temperature Corrosion of Ferritic and Austenitic Alloys in a Simulated Pyrolysis Process of Post-Consumer Plastics

    Nimmervoll, M., Mori, G. K., Bucher, E., Hönig, S. & Haubner, R., 29 Jun 2021, (E-pub ahead of print) In: Berg- und hüttenmännische Monatshefte : BHM.

    Research output: Contribution to journal › Article › Research

  4. Published

    Surface sulphide formation on high-temperature corrosion resistant alloys in a H2S-HCl-CO2 mixed atmosphere

    Nimmervoll, M., Mori, G. K., Schmid, A., Hönig, S. & Haubner, R., 1 Apr 2021, In: Corrosion science.

    Research output: Contribution to journal › Article › Research › peer-review

  5. Published

    Behavior of high-temperature corrosion resistant alloys in HCl and H2S containing atmospheres

    Nimmervoll, M., Mori, G. K., Hönig, S. & Haubner, R., 2021.

    Research output: Contribution to conference › Poster › Research › peer-review

  6. Published

    High-temperature high-pressure SCC testing of corrosion-resistant alloys

    Galakhova, A., Mori, G. K. & Prattes, K., 2021, In: Materials and Corrosion.

    Research output: Contribution to journal › Article › Research › peer-review

  7. 2020
  8. Published

    Cathodic and Anodic Stress Corrosion Cracking of a New High-Strength CrNiMnMoN Austenitic Stainless Steel

    Truschner, M., Deutsch, J., Mori, G. K. & Keplinger, A., 19 Nov 2020, In: Metals : open access journal . 10.2020, 11, 12 p., 1541.

    Research output: Contribution to journal › Article › Research › peer-review

  9. Published

    Metallographic Documentation of the Degradation of Iron and Nickel Based Alloys in HCl and H2S Containing Environments, between 480 – 680 °C

    Schmid, A., Mori, G. K. & Haubner, R., 16 Nov 2020, In: Defect and diffusion forum [Elektronische Resource]. 2020, 405, p. 26-32 7 p.

    Research output: Contribution to journal › Article › Research › peer-review

  10. Published

    Hochtemperaturkorrosion an Stählen und Nickelbasislegierungen in HCl und H2S haltiger Mischgasatmosphäre

    Haubner, R., Nimmervoll, M., Schmid, A. & Mori, G. K., 4 Nov 2020, Tagungsband 3-Länder-Korrosionstagung. Frankfurt/Main, 10 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  11. Published

    Depassivation and repassivation of stainless steels by stepwise pH change

    Mujanović, E., Zajec, B., Legat, A., Kosec, T., Kovač, J., Mori, G., Hönig, S. & Zehethofer, G., 2 Oct 2020, In: Materials and Corrosion. 72.2021, 3, p. 421-433 13 p.

    Research output: Contribution to journal › Article › Research › peer-review

  12. Published

    Cycled hydrogen permeation through Armco iron – A joint experimental and modeling approach

    Drexler, A., Siegl, W., Ecker, W., Tkadletz, M., Klösch, G., Schnideritsch, H., Mori, G. K., Svoboda, J. & Fischer, F.-D., 23 Sept 2020, In: Corrosion science. 176.2020, November, 11 p., 109017.

    Research output: Contribution to journal › Article › Research › peer-review

  13. Published

    Resistance to stress corrosion cracking of a new high strength stainless steel wire material

    Truschner, M., Trautmann, A. (Co-editor), Deutsch, J. (Co-editor), Mori, G. K. (Co-editor) & Keplinger, A. (Co-editor), 7 Sept 2020.

    Research output: Contribution to conference › Poster › Research

  14. Published

    Hydrogen Uptake and Embrittlement of Carbon Steels in Various Environments

    Trautmann, A., Mori, G., Oberndorfer, M., Bauer, S., Holzer, C. & Dittmann, C., 14 Aug 2020, In: Materials. 13.2020, 16, 16 p., 3604.

    Research output: Contribution to journal › Article › Research › peer-review

  15. Published

    Effect of Polishing on Electrochemical Behavior and Passive Layer Composition of Different Stainless Steels

    Rokosz, K., Solecki, G., Mori, G., Fluch, R., Kapp, M. & Lahtinen, J., 1 Aug 2020, In: Materials. 13.2020, 15, 12 p., 3402.

    Research output: Contribution to journal › Article › Research › peer-review

  16. Published

    Hydrogen Uptake of Duplex 2205 at H2 Partial Pressures up to 100 bar

    Trautmann, A., Mori, G. K., Siegl, W., Truschner, M., Pfeiffer, J., Kapp, M., Keplinger, A., Oberndorfer, M. & Bauer, S., Jan 2020, In: Berg- und hüttenmännische Monatshefte : BHM. 165.2020, 1, p. 40-45 6 p.

    Research output: Contribution to journal › Article › Research › peer-review

  17. 2019
  18. Published

    Activation and Repassivation of Stainless Steels in Artificial Brines as a Function of pH

    Mujanovic, E., Zajec, B., Legat, A., Kosec, T., Hönig, S., Zehethofer, G. & Mori, G., 20 Nov 2019, In: Materials. 2019, 12, 11 p.

    Research output: Contribution to journal › Article › Research › peer-review

  19. Published

    Hydrogen Uptake of Duplex 2205 at H2 partial pressures up to 100 bar

    Trautmann, A., Mori, G., Siegl, W., Truschner, M., Pfeiffer, J., Kapp, M., Keplinger, A., Oberndorfer, M. & Bauer, S., 30 Sept 2019, p. 338-345. 8 p.

    Research output: Contribution to conference › Paper › peer-review

  20. Published

    Hydrogen charging of Armco Iron and L80 Steel in various electrolytes

    Truschner, M., Trautmann, A., Siegl, W. & Mori, G. K., 9 Sept 2019.

    Research output: Contribution to conference › Poster › Research

  21. Published

    Hydrogen trapping in heat treated and deformed Armco iron

    Siegl, W., Mori, G. K., Ecker, W., Klarner, J., Klösch, G., Winter, G., Schnideritsch, H. & Drexler, A., 24 Mar 2019. 12 p.

    Research output: Contribution to conference › Paper

  22. Published

    Susceptibility of Selected Steel Grades to Hydrogen Embrittlement - Simulating Field Conditions by Performing Laboratory Wheel Tests With Autoclaves

    Trautmann, A., Mori, G. K., Oberndorfer, M. & Bauer, S., Mar 2019. 10 p.

    Research output: Contribution to conference › Paper › peer-review

  23. Published

    The influence of NaCl and CaCl2 induced high temperature corrosion on the aqueous corrosion resistance of stainless steels

    Mori, G., Vidic, K. J., Bucher, E., Yasir, M., Hornauer, D., Nachtnebel, M., Fitzek, H. & Schroettner, H., 20 Feb 2019, In: Materials and Corrosion. 70.2019, 6, p. 1071-1086 16 p.

    Research output: Contribution to journal › Article › Research › peer-review

  24. Published

    Hochtemperaturkorrosion des Stahls X15CrNiSi25-21 (1.4841) in einer Mischgasatmosphäre-Probenpräparation und Schädigungsmechanismus

    Schmid, A., Mori, G., Hönig, S., Strobl, S. & Haubner, R., 1 Jan 2019, In: Praktische Metallographie/Practical Metallography. 56, 7, p. 457-468 12 p.

    Research output: Contribution to journal › Article › Research › peer-review

  25. 2018
  26. Published

    Model about the course of corrosion reactions of austenitic steels in a H2S, HCl and CO2 containing atmosphere at 680°C

    Schmid, A., Mori, G. K., Bucher, E. & Haubner, R., 19 Oct 2018, In: Oxidation of metals. 2018, 10 p., https://doi.org/10.1007/s11085-018-9876-z.

    Research output: Contribution to journal › Article › Research › peer-review

  27. Published

    Corrosion behaviour of Fe and Ni based alloys in the reactor atmosphere of a thermal cracking process

    Schmid, A., Mori, G. K., Haubner, R. & Hönig, S., 10 Sept 2018.

    Research output: Contribution to conference › Presentation › Research

  28. Published

    Contribution to the Understanding of Hydrogen Trapping in Armco Iron

    Siegl, W., Mori, G. K. & Zauchner, T., 29 May 2018.

    Research output: Contribution to conference › Poster › Research

  29. Published

    Comparison of the high-temperature chloride-induced corrosion between duplex steel and Ni based alloy in presence of H2S

    Schmid, A., Mori, G. K., Hönig, S., Weil, M., Strobl, S. & Haubner, R., 5 May 2018, In: Corrosion science. 139, 15 July 2018, p. 76 - 82 6 p.

    Research output: Contribution to journal › Article › Research › peer-review

  30. Published

    NaCl and CaCl2-induced high temperature corrosion of automotive exhaust components

    Vidic, K. & Mori, G. K., 15 Apr 2018, p. 1-15. 15 p.

    Research output: Contribution to conference › Paper › peer-review

  31. Published

    Behaviour of S31400 and S32205 steels in HCl- and H2S-containing gas atmospheres under a low oxygen partial pressure between 480 – 680 °C

    Schmid, A., Mori, G. K., Haubner, R., Weil, M. & Hönig, S., 27 Feb 2018, In: Materials and Corrosion. DOI: 10.1002/maco.201709992, p. 1328 - 1337

    Research output: Contribution to journal › Article › Research › peer-review

  32. Published

    Ungewöhnliche Rissbildung an einem Autoklaven bei Versuchen zum thermischen Cracken von anthropogenen Ressourcen

    Schmid, A., Mori, G. K., Strobl, S. & Haubner, R., 18 Jan 2018, In: Practical metallography = Praktische Metallographie. Vol. 55, 4, p. 244-253

    Research output: Contribution to journal › Article › Research › peer-review

  33. Published

    Corrosion behaviour of Fe and Ni based alloys in the reactor atmosphere of a thermal cracking process

    Schmid, A., Mori, G., Hönig, S. & Haubner, R., 1 Jan 2018, European Corrosion Congress, EUROCORR 2018. p. 44-58 15 p. (European Corrosion Congress, EUROCORR 2018).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  34. Published

    Model About the Course of Corrosion Reactions of Austenitic Steels in H2S-, HCl- and CO2-Containing Atmospheres at 680 °C

    Schmid, A., Mori, G. K., Bucher, E. & Haubner, R., 2018, In: Oxidation of metals. 91, 1-2

    Research output: Contribution to journal › Article › Research › peer-review

  35. 2017
  36. Published

    Depletion zones and intergranular corrosion of superaustenitic stainless steel Alloy 926

    Mori, G., Prohaska, M., Lackner, R., Rokosz, K., Albu, M. & Kothleitner, G., 1 Mar 2017, In: Materials and Corrosion. 68, 3, p. 284-294 11 p.

    Research output: Contribution to journal › Article › Research › peer-review

  37. Published

    Corrosion of various Fe and Ni based alloys in HCl, H2S containing environments, with low oxygen partial pressure, at 680 °C

    Alexander, S., Mori, G., Strobl, S., Haubner, R. & Hönig, S., 1 Jan 2017.

    Research output: Contribution to conference › Paper › peer-review

  38. Published

    UNS S31400 stainless steel as reactor material in a thermal cracking process

    Schmid, A. & Mori, G., 1 Jan 2017, Corrosion Conference and Expo 2017. p. 3053-3062 10 p. (NACE - International Corrosion Conference Series; vol. 5).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  39. 2016
  40. Published

    Corrosion Behavior Influenced by Quenching Conditiones of HTGN Martensitic Stainless Steel

    Borchert, M., Mori, G., Kozeschnik, E., Povoden-Karadeniz, E., Bischof, M. & Tomandl, A., 28 Sept 2016.

    Research output: Contribution to conference › Presentation › Research › peer-review

  41. Published

    Hydrogen embrittlement of high strength steel under in situ corrosive charging conditions and tensile load

    Scharf, R., Muhr, A., Stellnberger, K.-H., Faderl, J., Holzer, C. & Mori, G. K., 21 Jun 2016, In: Materials and Corrosion. 68, 1

    Research output: Contribution to journal › Article › Research › peer-review

  42. Published

    Aufstickung und Korrosionsverhalten martensitischer rostfreier Stähle

    Borchert, M. & Mori, G., 11 May 2016.

    Research output: Contribution to conference › Presentation › Research

  43. Published

    Spannungsrisskorrosionsprüfung von Hochfesten Stählen in der Befestigungstechnik

    Borchert, M., Mori, G., Bischof, M. & Tomandl, A., 8 Apr 2016.

    Research output: Contribution to conference › Poster › Research

  44. Published

    Hydrogen embrittlement of DP-1000 flat steel sheet: Influence of mechanical properties, specimen geometry, pre-damaging and electrolytically zinc galvanizing

    Scharf, R., Muhr, A., Luckeneder, G., Larour, P., Mraczek, K., Rehrl, J., Leomann, F., Stellnberger, K. H., Faderl, J. & Mori, G., 1 Mar 2016, In: Materials and Corrosion. 67, 3, p. 239-250 12 p.

    Research output: Contribution to journal › Article › Research › peer-review

  45. Published

    Influence of different types of localized corrosion on the fatigue behavior of an austenitic stainless steel

    Visser, A., Mori, G., Pippan, R., Kapp, M., Fluch, R., Leitner, H., Panzenböck, M. & Holper, B., 1 Jan 2016, NACE International - Corrosion Conference and Expo 2016. p. 3201-3210 10 p. (NACE - International Corrosion Conference Series; vol. 4).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  46. Published

    3D Atom Probe Characterisation of Passive Layers on Stainless Steels

    Mori, G., Visser, A., Turk, C., Mendez Martin, F., Kapp, M., Fluch, R. & Leitner, H., 2016.

    Research output: Contribution to conference › Presentation › Research › peer-review

  47. Published

    Die Angst des Maschinenbauers vor der Chemie

    Mori, G., 2016.

    Research output: Contribution to conference › Presentation › Education

  48. Published

    EVALUATION OF PERFORMANCE OF AN AMINE BASED AND AN IMIDAZOLINE BASED GAS AND GAS CONDENSATE INHIBITOR

    Mori, G., 2016.

    Research output: Contribution to conference › Presentation › Research › peer-review

  49. Published

    Improvement of oxidation and corrosion resistance of Mo thin films by alloying with Ta

    Hofer-Roblyek, A. M., Mori, G., Fian, A., Winkler, J. & Mitterer, C., 2016, In: Thin solid films. 599, p. 1-6 6 p.

    Research output: Contribution to journal › Article › Research › peer-review

  50. Published

    Spannungsrisskorrosion an Türhaltern aus hochfestem Aluminium

    Mori, G., 2016.

    Research output: Contribution to conference › Presentation › Research

  51. 2015
  52. Published

    Effect of high temperature nitrding on corrosion properties of martensitic stainless steels

    Borchert, M. & Mori, G., 4 Sept 2015.

    Research output: Contribution to conference › Presentation › Research

  53. Published

    EVALUATION OF PERFORMANCE OF AN AMINE BASED AND AN IMIDAZOLINE BASED GAS AND GAS CONDENSATE INHIBITOR TESTED WITH HIGH VELOCITY LABORATORY TEST RIG

    Prethaler, A. & Mori, G., 16 Mar 2015.

    Research output: Contribution to conference › Paper › peer-review

  54. Published

    Assessing hydrogen susceptibility of press-hardened & high strength steels using various testing methods

    Muhr, A., Kolnberger, S., Zwettler, F., Luckeneder, G., Faderl, J., Stellnberger, K. H., Mori, G. & Kurz, T., 1 Jan 2015, European Corrosion Congress, EUROCORR 2015. ASMET, 1 p. (European Corrosion Congress, EUROCORR 2015; vol. 2).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  55. Published

    Corrosion in a thermal cracking process

    Schmid, A. & Mori, G., 1 Jan 2015, European Corrosion Congress, EUROCORR 2015. ASMET, 1 p. (European Corrosion Congress, EUROCORR 2015; vol. 2).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  56. Published

    Corrosion resistance of hot-dip galvanised steel in soils

    Ziebermayr, S., Fleischanderl, M., Stellnberger, K. H., Linhardt, P. & Mori, G., 1 Jan 2015, European Corrosion Congress, EUROCORR 2015. ASMET, 1 p. (European Corrosion Congress, EUROCORR 2015; vol. 3).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  57. Published

    Influence of different heat treatments on sensitization of alloy 625

    Mori, G., Lackner, R., Winter, F., Rinner, H. & Egger, R., 1 Jan 2015, European Corrosion Congress, EUROCORR 2015. ASMET, 1 p. (European Corrosion Congress, EUROCORR 2015; vol. 2).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  58. Published

    EVALUATION OF PERFORMANCE OF AN AMINE BASED AND AN IMIDAZOLINE BASED GAS CONDENSATE INHIBITOR TESTED WITH A HIGH VELOCITY LABORATORY TEST RIG

    Prethaler, A. & Mori, G., 2015, In: Berg- und hüttenmännische Monatshefte : BHM. 7/2015

    Research output: Contribution to journal › Article › Research › peer-review

  59. Published

    Impact of microstructural characteristics on the corrosion morphology of high strength brazing sheets

    Kremmer, T., Antrekowitsch, H., Oberhauser, P., Hanko, G. & Mori, G., 2015, Proceedings of EMC 2015.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  60. 2014
  61. Published

    Investigation of the corrosion behavior of Zn-Al-Mg hot-dip galvanized steel in alternating climate tests

    Keppert, T. A., Luckeneder, G., Stellnberger, K. H., Mori, G. & Antrekowitsch, H., 1 Dec 2014, In: Corrosion. 70, 12, p. 1238-1248 11 p.

    Research output: Contribution to journal › Article › Research › peer-review

  62. Published

    The effect of magnesium on the corrosion of hot-dip galvanized steel in chloride containing environments

    Keppert, T. A., Luckeneder, G., Stellnberger, K. H., Commenda, C., Mori, G. & Antrekowitsch, H., 1 Sept 2014, In: Materials and Corrosion. 65, 9, p. 871-880 10 p.

    Research output: Contribution to journal › Article › Research › peer-review

  63. Published

    EVALUATION OF PERFORMANCE OF GAS AND GAS CONDENSATE INHIBITORS WITH A LABORATORY TWO PHASE FLOW

    Prethaler, A. & Mori, G., 20 Mar 2014.

    Research output: Contribution to conference › Paper › peer-review

  64. Published

    Corrosion behaviour of nitriding steel grade coated with amorphous a-C:H:Si coating

    Dipolt, C. & Mori, G., 1 Jan 2014, International Corrosion Conference series / National Association of Corrosion Engineers: Corrosion 2014. (NACE - International Corrosion Conference Series).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  65. Published

    Erosion-corrosion rates of corrosion-resistant alloys under high-velocity multiphase conditions

    Mori, G., Vogl, T., Haberl, J., Havlik, W., Schöberl, T. & Hosemann, P., 1 Jan 2014, In: Corrosion. 70, 6, p. 579-590 12 p.

    Research output: Contribution to journal › Article › Research › peer-review

  66. Published

    Internal corrosion of automotive exhaust systems

    Hashimoto, R., Mori, G., Tröger, U. & Wieser, H., 1 Jan 2014, International Corrosion Conference series / National Association of Corrosion Engineers. (NACE - International Corrosion Conference Series).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  67. Published

    On the slowdown of the crack propagation rate of austenitic stainless steels in corrosive environment

    Kapp, M., Fluch, R., Martinez, C., Pippan, R., Mori, G., Vichytil, C., Sonnleitner, R. & Panzenböck, M., 1 Jan 2014, International Corrosion Conference series / National Association of Corrosion Engineers. (NACE - International Corrosion Conference Series).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  68. Published

    Accelerated SCC Testing of Stainless Steels According to Corrosion Resistance Classes

    Borchert, M., Mori, G., Bischof, M. & Tomandl, A., 2014, Accelerated SCC Testing of Stainless Steels According to Corrosion Resistance Classes. p. 1-10

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  69. Published

    AMAG TopClad UHS: Der hochfeste Werkstoffverbund für hochbeanspruchte Wärmetauscher-Anwendungen

    Hanko, G., Oberhauser, P., Kremmer, T., Antrekowitsch, H., Kratzer, M., Teichert, C. & Mori, G., 2014, 8. Ranshofener Leichtmetalltage, Leichtmetalle - Prozesse - Anwendungen: Zukunftstechnologien als Basis für neue Mobilitätskonzepte. p. 18-28

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  70. Published

    Correlation between Streicher and EPR Test

    Lackner, R., Mori, G., Egger, R. & Winter, F., 2014, Correlation between Streicher and EPR Test. p. 1-15

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  71. Published

    Corrosion Fatigue of Austenitic Stainless Steel in Different Hot Chloride Solutions

    Visser, A., Mori, G., Panzenböck, M. & Pippan, R., 2014, Corrosion Fatigue of Austenitic Stainless Steel in Different Hot Chloride Solutions. p. 1-6

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  72. Published

    Determination of Trapping Parameters and the Chemical Diffusion Coefficient from Hydrogen Permeation Experiments

    Svoboda, J., Mori, G., Prethaler, A. & Fischer, F. D., 2014, In: Corrosion science. 82, p. 93-100

    Research output: Contribution to journal › Article › Research › peer-review

  73. Published

    High strength brazing sheet with improved corrosion resistance

    Kremmer, T., Hanko, G., Oberhauser, P., Hajek, A., Antrekowitsch, H. & Mori, G., 2014, DVS-Berichte: Aluminium Brazing 8th International Congress. p. 67-74

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  74. Published

    Influence of Tantalum on structure, electrical resistivity and corrosion behavior of sputtered molybdenum films

    Hofer-Roblyek, A. M., Reinfried, N., Mori, G., Winkler, J. & Mitterer, C., 2014.

    Research output: Contribution to conference › Presentation › Research › peer-review

  75. Published

    Precipitation and dissolution of critical phases in Alloy 625

    Lackner, R., Mori, G., Egger, R. & Winter, F., 2014, Precipitation and dissolution of critical phases in Alloy 625. p. 1-10

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  76. Published

    Schwingungsrisskorrosion rostfreier austenitischer Stähle in heißen chloridhaltigen Lösungen

    Visser, A., Mori, G., Panzenböck, M., Kapp, M., Leitner, H., Fluch, R. & Holper, B., 2014, In: Berg- und hüttenmännische Monatshefte : BHM. 159, p. 300-301

    Research output: Contribution to journal › Article › Research › peer-review

  77. Published

    Sensitization of as Rolled and Stable Annealed Alloy 625

    Lackner, R., Mori, G., Egger, R. & Winter, F., 2014, In: Berg- und hüttenmännische Monatshefte : BHM. 158, p. 12-22

    Research output: Contribution to journal › Article › Research › peer-review

  78. Published

    The effect of sulphate, phosphate, nitrate and acetate on the corrosion behaviour of Zn-Al-Mg hot-dip galvanised steel

    Keppert, T., Luckeneder, G., Stellnberger, K.-H., Mori, G. & Antrekowitsch, H., 2014, In: Materials and Corrosion. p. 560-568

    Research output: Contribution to journal › Article › Research › peer-review

  79. 2013
  80. Published

    Chemical composition of real condensate in automotive exhaust systems

    Hashimoto, R., Mori, G., Yasir, M., Tröger, U. & Wieser, H., 1 Dec 2013, EUROCORR 2013 - European Corrosion Congress. (EUROCORR 2013 - European Corrosion Congress).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  81. Published

    Corrosion fatigue properties of austenitic stainless steels with different composition and strength in chloride solutions

    Visser, A., Vichytil, C., Mori, G., Vidic, J., Pippan, R., Panzenböck, M. & Kapp, M., 1 Dec 2013, EUROCORR 2013 - European Corrosion Congress. (EUROCORR 2013 - European Corrosion Congress).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  82. Published

    Sensitization of stable and as rolled annealed Alloy 625

    Lackner, R., Mori, G., Egger, R., Winter, F., Albu, M. & Kothleitner, G., 1 Dec 2013, EUROCORR 2013 - European Corrosion Congress. (EUROCORR 2013 - European Corrosion Congress).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  83. Published

    Biokraftstoffe und Korrosion

    Havlik, W., Thayer, K., Mori, G. & Holzer, C., 2013, Biokraftstoffe und Korrosion. p. 133-140

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  84. Published

    Corrosion fatigue and repassivation investigations of CrNiMo austenitic stainless steels in chloride environment

    Visser, A., Vichytil, C., Mori, G., Vidic, K., Pippan, R., Panzenböck, M., Kapp, M. & Fluch, R., 2013, In: Berg- und hüttenmännische Monatshefte : BHM. 158, p. 384-390

    Research output: Contribution to journal › Article › Research › peer-review

  85. Published

    Corrosion of Molybdenum in Cooling Water

    Holzer, C., Vichytil, C., Mori, G. & Linke, C., 2013, Corrosion of Molybdenum in Cooling Water. p. 1-13

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  86. Published

    Corrosion Research in Austria

    Mori, G., 2013, In: Berg- und hüttenmännische Monatshefte : BHM. p. 347-347

    Research output: Contribution to journal › Article › Research › peer-review

  87. Published

    Efficiency of two gas and gas condensate inhibitors in a laboratory two phase flow

    Prethaler, A., Vogl, T., Mori, G., Havlik, W., Zehethofer, G., Hönig, S. & Rosenberg, E., 2013, Efficiency of two gas and gas condensate inhibitors in a laboratory two phase flow. p. 1-12

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  88. Published

    Evaluation of two different Inhibitor Testing Methods for High Superficial Flow Conditions

    Prethaler, A., Vogl, T., Mori, G., Havlik, W., Zehethofer, G. & Hönig, S., 2013, In: Berg- und hüttenmännische Monatshefte : BHM. 158, p. 371-376

    Research output: Contribution to journal › Article › Research › peer-review

  89. Published

    Influence of Key Parameters on NACE Standard TM0177 DCB Sour Gas Test

    Moderer, L., Holzer, C., Mori, G., Klösch, G., Klarner, J. & Sonnleitner, R., 2013, In: Berg- und hüttenmännische Monatshefte : BHM. p. 348-354

    Research output: Contribution to journal › Article › Research › peer-review

  90. Published

    Influence of the pH value on the corrosion of Zn-Al-Mg hot-dip galvanized steel sheets in chloride containing environments

    Keppert, T., Mori, G., Luckeneder, G. & Stellnberger, K.-H., 2013, In: Berg- und hüttenmännische Monatshefte : BHM. p. 355-363

    Research output: Contribution to journal › Article › Research › peer-review

  91. Published

    Investigations on susceptibility to intergranular corrosion of thermo-mechanically rolled corrosion-resistant materials 316L and Alloy 825

    Prohaska, M., Mori, G., Grill, R., Tischler, G. & Mitsche, S., 2013, In: Materials and Corrosion. p. 290-299

    Research output: Contribution to journal › Article › Research › peer-review

  92. Published

    Modelling the Influence of Trapping on Hydrogen Permeation in Metals

    Fischer, F. D., Mori, G. & Svoboda, J., 2013, In: Corrosion science. 76, p. 382-389

    Research output: Contribution to journal › Article › Research › peer-review

  93. Published

    Molybdenum and Chromium Depletion at Grain Boundary Precipitates Alloy 926

    Lackner, R., Mori, G., Egger, R., Tischler, G. & Prohaska, M., 2013, In: Berg- und hüttenmännische Monatshefte : BHM. p. 364-370

    Research output: Contribution to journal › Article › Research › peer-review

  94. Published

    Molybdenum corrosion in PVD processes

    Holzer, C., Vichytil, C., Mori, G. & Linke, C., 2013, Molybdenum corrosion in PVD processes. p. 1-13

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  95. Published

    Sensitization of stable and as rolled Alloy 625

    Lackner, R., Mori, G., Egger, R., Winter, F., Albu, M. & Kothleitner, G., 2013, Sensitization of stable and as rolled Alloy 625. p. 1-10

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  96. Published

    UNS 06625: PRECIPITATION AND SENSITIZATION

    Lackner, R., Mori, G., Egger, R. & Tischler, G., 2013, UNS 06625: PRECIPITATION AND SENSITIZATION. p. 1-15

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  97. 2012
  98. Published

    Study of sensitization and different heating cycles on stainless steels used for automotive exhaust components

    Yasir, M., Mori, G., Wieser, H., Reller, A. & Höppel, H. W., 1 Sept 2012, In: Materials and Corrosion. 63, 9, p. 763-776 14 p.

    Research output: Contribution to journal › Article › Research › peer-review

  99. Published

    applicability and limitations of the epr-test as a substitute for ASTM G28 A Streicher-Test

    Mori, G., Prohaska, M. & Tischler, G., 2012, EMCR 2012. p. 1-4

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  100. Published

    Crack growth rates and corrosion fatigue of austenitic stainless steels in high chloride solutions

    Vichytil, C., Mori, G., Pippan, R., Panzenböck, M. & Fluch, R., 2012, In: Key engineering materials. 488-489, p. 97-100

    Research output: Contribution to journal › Article › Research › peer-review

  101. Published

    Effect of isothermal and thermo-mechanical heat treatment on phase precipitation and corrosion properties of Alloy 926

    Lackner, R., Mori, G., Prohaska, M., Egger, R. & Tischler, G., 2012, Effect of isothermal and thermo-mechanical heat treatment on phase precipitation and corrosion properties of Alloy 926. p. 1-11

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  102. Published

    effect of microalloying elements on sour service grades with higher strenghts

    Moderer, L., Mori, G. & Schwarz, S., 2012, Corrosion 2012. p. 1-15

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  103. Published

    Einfluss von Inhibitoren auf strömungsinduzierte CO2 Korrosion

    Vogl, T. & Mori, G., 2012.

    Research output: Contribution to conference › Poster › Research › peer-review

  104. Published

    Fatigue and cracking behaviour of austenitic CrNiMo and CrMnN steels in chloride containing environment at elevated temperature

    Vichytil, C., Mori, G., Pippan, R., Panzenböck, M. & Fluch, R., 2012, Fracture Mechanics for Durability, Reliability and Safety. p. 1-11

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  105. Published

    Improvement of the corrosion behaviour of molybdenum films by alloying with tantalum

    Hofer, A. M., Reinfried, N., Mori, G., Winkler, J. & Mitterer, C., 2012.

    Research output: Contribution to conference › Poster › Research › peer-review

  106. Published

    influence of alloying elements on the passivity and repassivation of austenitic stainless steels

    Mori, G., Vichytil, C., Umgeher, A. & Fluch, R., 2012, Eurocorr 2012. p. 1-12

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  107. Published

    Influence of pH value on the corrosion of Zn-Al-Mg hot-dip galvanized steel sheets in chloride containing environments

    Keppert, T., Luckeneder, G., Stellnberger, K. H. & Mori, G., 2012, Corrosion 2012. p. 3978 - 3992 (International Corrosion Conference series / National Association of Corrosion Engineers; vol. 5).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  108. Published

    Inhibitor-testing by a new high superficial velocity flow-loop system

    Vogl, T., Reisl, T., Zehethofer, G., Mori, G., Havlik, W. & Honig, S., 2012, Corrosion Conference and Expo. 2012. Vol. 4. p. 2917-2930

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  109. Published

    Molybdenum and Chromium Depletion at Grain Boundary Principia in Alloy 926

    Lackner, R., Mori, G., Prohaska, M., Egger, R. & Tischler, G., 2012, Molybdenum and Chromium Depletion at Grain Boundary Principia in Alloy 926. p. 1-13

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  110. Published

    Schäden an Hängeseilbrücken

    Mori, G., 2012, 3-Länder-Korrosionstagung 2012. p. 16-22

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

Previous 1 2 3 Next
View graph of relations

Contact

Phone: 1250

Latest Research Output

View more (216)