Gerald Pilz

1 - 100 out of 150Page size: 100

Publications / Theses

  1. 2020
  2. Published

    The crucial role of external force in the estimation of the topology freezing transition temperature of vitrimers by elongational creep measurements

    Kaiser, S., Novak, P., Giebler, M., Gschwandl, M., Novak, P., Pilz, G., Morak, M. & Schlögl, S., 9 Sept 2020, In: Polymer. 204, 122804.

    Research output: Contribution to journal › Article › Research › peer-review

  3. Published

    Experimental method for creep characterization of polymeric foam materials in media immersion

    Pilz, G., Guttmann, P., Oesterreicher, F. & Pinter, G. G., 30 Jul 2020, In: Mechanics of time-dependent materials. 24.2020, December, p. 421-433 13 p.

    Research output: Contribution to journal › Article › Research › peer-review

  4. 2019
  5. Published

    NOVEL APPROACHES FOR LIFETIME PREDICTION OF COMPOSITE MATERIALS FOR STRUCTURAL APPLICATIONS UNDER STATIC LOADS

    Pilz, G., Gloggnitzer, S., Schneider, C. & Pinter, G. G., Sept 2019.

    Research output: Contribution to conference › Paper › peer-review

  6. Published

    Stress relaxation and thermally adaptable properties in vitrimer-like elastomers from HXNBR rubber with covalent bonds

    Kaiser, S., Wurzer, S., Pilz, G., Kern, W. & Schlögl, S., 14 Aug 2019, In: Soft Matter. 15, 30, p. 6062-6072 11 p.

    Research output: Contribution to journal › Article › Research › peer-review

  7. Published

    Stepped Isothermal Method And Stress Rate Accelerated Creep Rupture Tests For Efficient Creep Investigaton Of Engineering Thermoplastics

    Pilz, G., Guttmann, P., Gloggnitzer, S. & Pinter, G. G., Mar 2019.

    Research output: Contribution to conference › Paper › peer-review

  8. Published

    Minimum invasive production-related SLS specimen manufacturing for interface characterization of hybrid materials made by RTM

    Hergan, P., Lechner, C., Fauster, E., Pilz, G. & Schledjewski, R., 15 Jan 2019, In: International Journal of Advanced Manufacturing Technology. 102.2019, 5-8, p. 1963-1972 10 p.

    Research output: Contribution to journal › Article › Research › peer-review

  9. Published

    Novel approach for the lifetime prediction of composite materials under static loads

    Gloggnitzer, S., Pilz, G., Schneider, C. & Pinter, G., 1 Jan 2019, 22nd Symposium on Composites. Hausmann, J. M. (ed.). p. 620-624 5 p. (Key Engineering Materials; vol. 809 KEM).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  10. Published

    Mechanical Characterization of High Performance Thermal Decoupling Units for Building Envelops

    Pilz, G., Gloggnitzer, S. & Schneider, C., 2019.

    Research output: Contribution to conference › Poster › Research

  11. Published

    MECHANICAL CHARACTERIZATION OF HIGH PERFORMANCE THERMAL DECOUPLING UNITS IN BUILDING ENVELOPS

    Pilz, G., Gloggnitzer, S., Schneider, C., Pinter, G. G. & Röper, F., 2019.

    Research output: Contribution to conference › Paper › peer-review

  12. Published

    SRCR - Mit zeiteffizienter Prüfung zur statischen Langzeitabsicherung: Effizientes Prüfkonzept für statisch langzeitbeanspruchte Faserverbundkomponenten im Baubereich

    Pilz, G., 2019, In: Carbon-Composites-Magazin : die Mitgliederzeitschrift des CCeV.

    Research output: Contribution to journal › Article › Research

  13. 2018
  14. Published

    Experimental method for creep characterization of polymeric foam materials in media immersion

    Pilz, G., Guttmann, P., Oesterreicher, F. & Pinter, G. G., 2018.

    Research output: Contribution to conference › Abstract › peer-review

  15. Published

    Influence of curing degree on the mechanical performance of polymer matrix composites

    Wolfahrt, M., Pilz, G. & Lang, R., 2018.

    Research output: Contribution to conference › Paper › peer-review

  16. 2017
  17. Published

    Fibre-reinforced polyamides and the influence of water absorption on the mechanical and thermomechanical behaviour

    Guttmann, P. & Pilz, G., 2017, Deformation and Fracture Behaviour of Polymer Materials. Springer Berlin, Vol. 247. p. 377-388 12 p. (Springer Series in Materials Science; vol. 247).

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research

  18. 2016
  19. Published

    Dynamic Mechanical Profile of Polyketone Compared to Conventional Technical Plastics

    Pilz, G. & Guttmann, P., 31 Oct 2016, AIP Conference Proceedings: Proceedings of the Regional Conference Graz 2015 – Polymer Processing Society PPS. Vol. 1779. p. 070008-1–070008-5 6 p. 070008-1

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  20. Published

    Concepts for service lifetime prediction of composite materials at different environmental conditions

    Gloggnitzer, S. & Pilz, G., 11 Sept 2016.

    Research output: Contribution to conference › Abstract

  21. Published

    25. Leobener Kunststoff Kolloquium "Kunststoffgerechte Bauteilentwicklung - vom Werkstoff zum Produkt"

    Pinter, G., Pilz, G. & Payer, M., 2016, Eigenverlag.

    Research output: Book/Report › Anthology › Research

  22. 2015
  23. Published

    Characterization of the aging behaviour of various polyamide materials - part II

    Pilz, G. & Pinter, G., 30 Oct 2015

    Research output: Book/Report › Other report › Transfer

  24. Published

    aliphatic Polyketones - Mechanical and Thermo-Mechanical Behaviour in Wet Environments

    Guttmann, P. & Pilz, G., 9 Sept 2015. 17 p.

    Research output: Contribution to conference › Presentation › Research

  25. Published

    Dynamic Mechanical Profile of Polyketone Compared to Conventional Technical Plastics

    Pilz, G. & Guttmann, P., 2015, Polymer Processing Society Graz 2015, Book of Abstracts. p. 110 1 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  26. Published

    Dynamic Mechanical Profile of Polyketone Compared to Conventional Technical Plastics

    Pilz, G., 2015.

    Research output: Contribution to conference › Presentation › Research › peer-review

  27. Published

    Efficient test methodology for mechanical characterization of structural polymers under media influence

    Pilz, G., 2015, Proceedings of Danube Vltava Sava Polymer Meeting - DVSPM 2015. p. 78 1 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  28. Published

    Efficient test methodology for mechanical characterization of structural polymers under media influence

    Pilz, G., 2015.

    Research output: Contribution to conference › Presentation › Research › peer-review

  29. Published

    Einfluss der Herstellungsparameter auf die mechanischen Eigenschaften von endlosfaserverstärkten Polyurethanharzlaminaten

    Gloggnitzer, S. & Pilz, G., 2015.

    Research output: Contribution to conference › Poster › Research

  30. Published

    Einfluss des Aushärtegrades auf wesentliche Werkstoffeigenschaften von Epoxidharz-Faserverbundwerkstoffen

    Wolfahrt, M. & Pilz, G., 2015.

    Research output: Contribution to conference › Presentation › Transfer

  31. Published

    Thermoforming of polymer laminate films: Thermo-viscoelastic characterization

    Truszkiewicz, E., Tscharnuter, D., Pilz, G. & Pinter, G., 2015, Mechanics of Solids, Structures and Fluids. American Society of Mechanical Engineers(ASME), (ASME International Mechanical Engineering Congress and Exposition, Proceedings (IMECE); vol. 9-2015).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  32. 2014
  33. Published

    Application Relevant Polymer Testing - Impact of Media on the Viscoelastic Behaviour of Engineering Polymers

    Guttmann, P., Pilz, G. & Oelzant, D., 2014, EUROCORR 2014 - Book of Abstracts. p. 527-527

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  34. Published

    Einfluss der Herstellungsparameter auf die mechanischen Eigenschaften von endlosfaserverstärkten Polyurethanharzlaminaten

    Gloggnitzer, S. & Pilz, G., 2014.

    Research output: Contribution to conference › Poster › Research › peer-review

  35. Published

    Einfluss der Herstellungsparameter auf die mechanischen Eigenschaften von endlosfaserverstärkten Polyurethanharzlaminaten

    Gloggnitzer, S. & Pilz, G., 2014, 23. Leobener Kunststoff-Kolloquium: Hocheffizeinte Verbundwerkstoffe. p. 175-179

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  36. Published

    Faserverstärkte Polyamide und der Einfluss der Wasseraufnahme auf deren mechanisches und thermo-mechanisches Verhalten

    Guttmann, P., Röper, F. & Pilz, G., 2014, Tagungsband Polymertec 2014. p. 372-377

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  37. Published

    Influence of the manufacturing parameters on mechanical properties of polyurethane based composites

    Gloggnitzer, S. & Pilz, G., 2014, Proceedings ECCM16.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  38. Published

    Thermomechanische Charakterisierung von Grünfolien

    Pilz, G. & Pinter, G., 2014

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  39. 2013
  40. Published

    Methodenabstimmung für DSC-Untersuchungen von PET-Tennissaiten

    Pilz, G. & Guttmann, P., 4 Nov 2013

    Research output: Book/Report › Other report › Transfer › peer-review

  41. Published

    Fatigue properties of polyurethane based high performance composites

    Gloggnitzer, S., Pilz, G. & Buchsteiner, T., 2013, ICSAAM 2013 Proceedings. p. 1-1

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  42. Published

    THE IMPACT OF TIME, TEMPERATURE AND MEDIA ON POLYMER SELECTION FOR HIGH DEMAND APPLICATIONS

    Guttmann, P., Röper, F. & Pilz, G., 2013, The Proceedings of the Austrian – Slovenian Polymer Meeting 2013. p. 60-63

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  43. Published

    Thermomechanische Eigenschaften von Hochleistungs-Faserverbundwerkstoffen auf Polyurethanharzbasis

    Gloggnitzer, S., Pilz, G. & Buchsteiner, T., 2013, Tagungsband Verbundwerkstoffe. p. 84-92

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  44. 2012
  45. Published

    Consideration of viscoelastic properties of polymers for materials selection

    Guttmann, P., Pilz, G. & Röper, F., 2012.

    Research output: Contribution to conference › Poster › Research › peer-review

  46. Published

    Hochleistungs-Faserverbundwerkstoffen auf Polyurethanharzbasis

    Gloggnitzer, S., Pilz, G. & Buchsteiner, T., 2012.

    Research output: Contribution to conference › Poster › Research › peer-review

  47. Published

    Polymer selection and testing methodology for high demand applications under environmental conditions

    Guttmann, P., Röper, F. & Pilz, G., 2012, Polymeric Materials. p. 58-59

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  48. Published

    Thermische Werkstoff-Charakterisierung von Spritzguss-Filterteilen aus PA6

    Pilz, G. & Pinter, G., 2012

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  49. 2011
  50. Published

    Bewitterungsuntersuchungen an PMMA-Linsen

    Pilz, G. & Pinter, G., 2011

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  51. Published

    Dynamisch-mechanische Analyse an Tennissaiten

    Pilz, G. & Pinter, G., 2011

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  52. Published

    Mechanische Eigenschaften Nanopartikel-verstärkter Epoxidharze

    Pilz, G. & Stadelmann, S., 2011, 20. Leobener Kunststoff-Kolloquium: Polymerer Leichtbau. p. 181-185

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  53. Published

    Optimierte RTM-Struktur-Bauteile für automotive Anwendungen

    Pilz, G., Loike, S. & Lammer, H., 2011, 20. Leobener Kunststoff-Kolloquium: Polymerer Leichtbau. p. 175-197

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  54. 2010
  55. Published

    Zugversuche an verklebten Aluminiumblechen

    Pilz, G. & Pinter, G., 2010

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  56. 2009
  57. Published

    Dynamisch-Mechanische Analyse (DMA) an PMMA-Folien

    Pilz, G. & Lang, R., 2009

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  58. Published

    Dynamisch-Mechanische Analyse (DMA) von Folienwerkstoffen

    Pilz, G. & Lang, R., 2009

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  59. Published

    Dynamisch-Mechanische Analyse (DMA) von Thermoplastwerkstoffen

    Pilz, G. & Lang, R., 2009

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  60. Published

    Mechanische Charakterisierung von CFK-Werkstoffen

    Pilz, G. & Lang, R., 2009

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  61. Published

    Mechanische und thermo-mechanische Charakterisierung von PA-Werkstoffen

    Pilz, G. & Pinter, G., 2009

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  62. Published

    Thermische Charakterisierung von POM-Bauteilen

    Pilz, G. & Pinter, G., 2009

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  63. Published

    Thermische Untersuchungen an glasfaserverstärkten PA-Werkstoffen

    Pilz, G. & Lang, R., 2009

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  64. Published

    Thermische Untersuchungen an PA-Werkstoffen

    Pilz, G. & Lang, R., 2009

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  65. Published

    Thermo mechanical characterization of PE and PP materials

    Pilz, G., Pinter, G. & Lang, R., 2009

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  66. Published

    Utilizing unbleached cellulosic fibres in polypropylene matrix composites for injection moulding applications

    Burgstaller, C., Rüf, W., Stadlbauer, W., Pilz, G. & Lang, R., 2009, In: Journal of biobased materials and bioenergy. p. 226-231

    Research output: Contribution to journal › Article › Research › peer-review

  67. Published

    Zug- und Biegeprüfung eines Polymerbeton-Verbundwerkstoffes

    Pilz, G. & Lang, R., 2009

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  68. 2008
  69. Published

    Analyse spezieller Zugversuchsergebnisse aus der Projektphase I

    Pilz, G. & Rausch-Schott, O., 2008

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  70. Published

    Dynamisch-mechanische Untersuchungen (DMA) an Thermoplastwerkstoffen

    Pilz, G. & Lang, R., 2008

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  71. Published

    Dynamisch-mechanische Untersuchungen (DMA) an Thermoplastwerkstoffen - Teil 2

    Pilz, G. & Lang, R., 2008

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  72. Published

    Mechanical Characterization of Modified Liner Resins HPM052

    Pilz, G. & Lang, R., 2008

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  73. Published

    Mechanical Characterization of VE- and UP-Laminates

    Pilz, G. & Lang, R., 2008

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  74. Published

    Mechanische Basischarakterisierung der Epoxidharze M13 und M14 im Trocken- und Feuchtzustand

    Pilz, G. & Karpf, R., 2008

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  75. Published

    Mechanische Eigenschaften von gepressten PP-Zellstoff-Faservliesen (Serien 08 bis 14)

    Pilz, G. & Rausch-Schott, O., 2008

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  76. Published

    Scanning Electron Microscopy (REM) for UP-Resins with Various Filler Types

    Pilz, G. & Lang, R., 2008

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  77. Published

    Tensile Tests for UP-Resin Distitron 412 V2 with Various Filler Types (dry and wet) - Part II

    Pilz, G. & Lang, R., 2008

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  78. Published

    Thermo-mechanische und bruchmechanische Charakterisierung impact-modifizierte Epoxidharze

    Pilz, G. & Karpf, R., 2008

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  79. Published

    Thermo-mechanische und bruchmechanische Charakterisierung impact-modifizierter Epoxidharze - Zusammenfassender Vergleich

    Pilz, G. & Karpf, R., 2008

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  80. Published

    Untersuchung des Tempereinflusses auf die Zugeigenschaften von gepressten E/P-Kraftzellstoff-Faservliesen

    Pilz, G. & Rausch-Schott, O., 2008

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  81. 2007
  82. Published

    Bestimmung der Druckfestigkeit von CFK-Laminatwerkstoffen

    Pilz, G. & Lang, R., 2007

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  83. Published

    Bestimmung der Kriech- und Zugeigenschaften für einen PTFE-Dichtungswerkstoff

    Pilz, G. & Lang, R., 2007

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  84. Published

    Characterization of non-nanofilled resins M06n and M10n

    Pilz, G. & Karpf, R., 2007

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  85. Published

    Compression tests on sandfilled UP-Resins

    Pilz, G. & Lang, R., 2007

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  86. Published

    Dynamisch-mechanische Charakterisierung (DMA) von Thermoplasten

    Pilz, G. & Lang, R., 2007

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  87. Published

    Feuchtigkeitseinfluss auf die Zugeigenschaften von gepressten E/P-Kraftzellstoff-Faservliesen

    Pilz, G. & Rausch-Schott, O., 2007

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  88. Published

    Influence of the curing degree on modulus, glass transition temperature and fracture energy of two epoxy resins for composites

    Wolfahrt, M., Pilz, G. & Lang, R., 2007.

    Research output: Contribution to conference › Poster › Research › peer-review

  89. Published

    Mechanical characterization of liner resin HPM052 for dry and wet material conditions

    Pilz, G. & Lang, R., 2007

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  90. Published

    Mechanische Basischarakterisierung der Epoxidharze M11 und M12 im Trocken- und Feuchtzustand

    Pilz, G., Karpf, R. & Thiel, H., 2007

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  91. Published

    Mechanische Charakterisierung von glas- und basaltfaserverstärkten Epoxidharzen

    Pilz, G. & Lang, R., 2007

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  92. Published

    Mechanische Eigenschaften von gepressten PP-Zellstoff-Faservliesen (Serie 7)

    Pilz, G. & Rausch-Schott, O., 2007

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  93. Published

    Mechanische Eigenschaften von gepressten PP-Zellstoff-Faservliesen (Serien 1 bis 6)

    Pilz, G. & Rausch-Schott, O., 2007

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  94. Published

    Nanoparticle Reinforcement for Epoxy Resins: Project Plan (Phase I) and Market Survey

    Pilz, G. & Stelzer, S., 2007

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  95. Published

    Nanoparticle Reinforcement of Epoxy Resins: Selection of resins and nanoparticles

    Pilz, G., 2007

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  96. Published

    Nanoparticle Screening for Applications in Thermoset Nanocomposites - Part 1 (SetScreen1)

    Pilz, G. & Karpf, R., 2007

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  97. Published

    Tensile tests for liner resin HPM053 with and without pigment

    Pilz, G. & Lang, R., 2007

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  98. Published

    Tensile tests for UP-Resin distitron 412 V2 with various filler types (dry and wet)

    Pilz, G. & Lang, R., 2007

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  99. Published

    Zug- und Druckeigenschaften des Laminatwerkstoffes L06 (Matrix: Epolack) für unterschiedliche Aushärtungsgrade

    Pilz, G., Karpf, R. & Thiel, H., 2007

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  100. 2006
  101. Published

    Bestimmung der Schlüsseleigenschaften spezieller Matrixharze für Verbundwerkstoffanwendungen

    Pilz, G. & Wolfahrt, M., 2006

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  102. Published

    Bestimmung der thermischen Ausdehnung von Epoxidharzwerkstoffen

    Pilz, G. & Lang, R., 2006

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  103. Published

    Charakterisierung von Epoxidharzwerkstoffen

    Pilz, G. & Lang, R., 2006

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  104. Published

    Control of the resin transfer moulding process using dielectric and thermal analysis

    Wolfahrt, M., Pilz, G., Lang, R. & Ladstätter, E., 2006, Latest advancements of applied composite technology: SAMPE Europe 27th international conference, March 27th - 29th, 2006, Paris EXPO, Porte de Versailles ; proceedings. p. 309-313

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  105. Published

    Dynamische-mechanische Analyse (DMA) von Thermoplasten

    Pilz, G. & Lang, R., 2006

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  106. Published

    Dynamisch-mechanische Untersuchungen und Kriechversuche an Elastomerwerkstoffen

    Pilz, G. & Lang, R., 2006

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  107. Published

    Heat deflection temperature of neat resins HPM001, HPM002 and HPM054

    Pilz, G. & Lang, R., 2006

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  108. Published

    Influence of the curing degree on key resin properties of high Tg epoxy resins for composites

    Wolfahrt, M., Pilz, G., Lang, R., Eugen, R., Krumlacher, W. & Plessing, A. K., 2006, proceedings: SAMPE-EUROPE 2006, Paris, F.. p. 314-319

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  109. Published

    Influence of the curing degree on modulus, glass transition temperature and fracture energy of two epoxy resins for composites

    Wolfahrt, M., Pilz, G. & Lang, R., 2006.

    Research output: Contribution to conference › Poster › Research › peer-review

  110. Published

    Mechanische Basischarakterisierung des Epoxidharzes M10 (Epomid FL) im Trocken - und Feuchtzustand

    Pilz, G., Karpf, R. & Thiel, H., 2006

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  111. Published

    Mechanische, thermo-mechanische und bruchmechanische Charakterisierung von Laminatwerkstoffen

    Pilz, G. & Wolfahrt, M., 2006

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  112. Published

    Moisture absorption of liner resins

    Pilz, G. & Lang, R., 2006

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  113. Published

    Tensile, Bending and Charpy Tests for GF-UP Materials W1 and W2

    Pilz, G. & Lang, R., 2006

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  114. Published

    Tensile, Bending and Charpy Tests for Hybrid Materials W32 and W42

    Pilz, G. & Lang, R., 2006

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  115. Published

    Tensile tests for neat resin and calciumcarbon-ate filled resin formulations of Distitron 412 V2

    Pilz, G. & Lang, R., 2006

    Research output: Book/Report › Commissioned report › Transfer › peer-review

Previous 1 2 Next
View graph of relations

Contact

Phone: 2109

Latest Research Output

View more (150)