Gerald Gerhard Pinter

1 - 50 out of 758Page size: 50

Publications / Theses

  1. 2024
  2. Published

    Morphological structure and mechanical properties of a nucleated Polyoxymethylene (POM) homopolymer resin processed under conventional injection molding conditions

    Schrank, T., Ramoa, B., Feuchter, M., Pinter, G., Pantani, R. & Berer, M., May 2024, In: Polymer Testing. 134, 108444.

    Research output: Contribution to journal › Article › Research › peer-review

  3. 2023
  4. Published

    Tailoring the optical and UV reflectivity of CFRP-epoxy composites: Approaches and selected results

    Haiden, L., Brunner, A. J., Pansare, A. V., Feuchter, M. & Pinter, G., 1 Jan 2023, In: Science and Engineering of Composite Materials. 30, 1, 20220175.

    Research output: Contribution to journal › Article › Research › peer-review

  5. 2022
  6. Published

    Injection Molding Simulation of Polyoxymethylene Using Crystallization Kinetics Data and Comparison with the Experimental Process

    Schrank, T., Berer, M., Haar, B., Ramoa, B., Lucyshyn, T., Feuchter, M., Pinter, G., Speranza, V. & Pantani, R., 2022, In: Polymer Crystallization. 2022, 2387752.

    Research output: Contribution to journal › Article › Research › peer-review

  7. 2021
  8. Published

    A combined experimental and simulation-based approach towards toughness optimized polymeric multi-layer structures

    Arbeiter, F., Wiener, J., Tiwari, A., Pinter, G. G. & Kolednik, O., 28 Sept 2021.

    Research output: Contribution to conference › Poster › Research

  9. Published

    Morphology and Weld Strength of a Semi-Crystalline Polymer Produced via Material Extrusion-Based Additive Manufacturing

    Petersmann, S., Primetzhofer, A., Lammer, H., Leßlhumer, J., Pinter, G. G. & Arbeiter, F., 8 Sept 2021, Abstract Book of the Second European Conference on Structural Integrity of Additively Manufactured Materials.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  10. Published

    Characterization of crack saturation in glass fiber reinforced epoxy resins through optical methods

    Gfrerrer, M., Schneider, C., Wiener, J., Sperling, C. & Pinter, G. G., 29 Jun 2021.

    Research output: Contribution to conference › Poster › Research

  11. Published

    Correction to: Modelling Failure Of Polymers: An Optimization Strategy Based on Genetic Algorithms and Instrumented Impact Tests

    Rueda, F., Rull, N., Quintana, C., Torres, J. P., Messiha, M., Frank, A., Arbeiter, F., Frontini, P. M. & Pinter, G., 20 May 2021, In: Journal of dynamic behavior of materials.

    Research output: Contribution to journal › Comment/debate › peer-review

  12. Published

    Modelling Failure Of Polymers: An Optimization Strategy Based on Genetic Algorithms and Instrumented Impact Tests

    Rueda, F., Rull, N., Quintana, C., Torres, J. P., Messiah, M., Frank, A., Arbeiter, F., Frontini, P. M. & Pinter, G., 30 Apr 2021, In: Journal of dynamic behavior of materials.

    Research output: Contribution to journal › Article › Research › peer-review

  13. Published

    Correlation of the cyclic cracked round bar test and hydrostatic pressure test for unplasticized polyvinylchloride

    Frank, A., Messiha, M., Koch, T., Poduška, J., Hutař, P., Arbeiter, F. & Pinter, G., 19 Feb 2021, In: Polymer Testing. 95.2021, March, 7 p., 107125.

    Research output: Contribution to journal › Article › Research › peer-review

  14. Published

    Model Calibration and Data Set Determination Considering the Local Micro-Structure for Short Fiber Reinforced Polymers

    Primetzhofer, A., Stadler, G., Pinter, G. & Grün, F., 27 Jan 2021, In: Journal of composites science.

    Research output: Contribution to journal › Article › Research › peer-review

  15. Published

    Quantifying matrix-fiber mechanical interactions in hyperelastic materials

    Mansouri, M. R., Beter, J., Fuchs, P. F., Schrittesser, B. & Pinter, G., 5 Jan 2021, In: International Journal of Mechanical Sciences. 195.2021, 1 April, 14 p., 106268.

    Research output: Contribution to journal › Article › Research › peer-review

  16. 2020
  17. Published

    Tailored Interfaces in Fiber-Reinforced Elastomers: A Surface Treatment Study on Optimized Load Coupling via the Modified Fiber Bundle Debond Technique

    Beter, J., Maroh, B., Schrittesser, B., Mühlbacher, I., Griesser, T., Schlögl, S., Fuchs, P. F. & Pinter, G., 24 Dec 2020, In: Polymers. 13.2020, 1, p. 1-17 17 p., 36.

    Research output: Contribution to journal › Article › Research › peer-review

  18. Published

    Fatigue characterization of polyethylene under mixed mode I/III conditions

    Gosch, A., Arbeiter, F., Berer, M., Vojtek, T., Hutař, P. & Pinter, G. G., 15 Dec 2020, In: International Journal of Fatigue. 145.2021, April, 13 p., 106084.

    Research output: Contribution to journal › Article › Research › peer-review

  19. Published

    Damage tolerance-based methodology for fatigue lifetime estimation of a structural component produced by material extrusion-based additive manufacturing

    Arbeiter, F., Trávníček, L., Petersmann, S., Dlhý, P., Spoerk, M., Pinter, G. & Hutař, P., Dec 2020, In: Additive Manufacturing. 36, 101730.

    Research output: Contribution to journal › Article › Research › peer-review

  20. Published

    Investigation of the influence of viscoelastic behaviour on the lifetime of short fibre reinforced polymers

    Stadler, G., Primetzhofer, A., Jerabek, M., Pinter, G. & Grün, F., Dec 2020, In: Polymers. 12, 12, p. 1-13 13 p., 2874.

    Research output: Contribution to journal › Article › Research › peer-review

  21. Published

    Comprehensive investigation of the viscoelastic properties of PMMA by nanoindentation

    Christöfl, P., Czibula, C., Berer, M., Oreski, G., Teichert, C. & Pinter, G., 27 Nov 2020, In: Polymer Testing. 93.2021, January, 9 p., 106978.

    Research output: Contribution to journal › Article › Research › peer-review

  22. Published

    The Tension-Twist Coupling Mechanism in Flexible Composites: A Systematic Study Based on Tailored Laminate Structures Using a Novel Test Device

    Beter, J., Schrittesser, B., Meier, G., Lechner, B., Mansouri, M., Fuchs, P. F. & Pinter, G., 24 Nov 2020, In: Polymers. 12.2020, 12, p. 1-16 16 p., 2780.

    Research output: Contribution to journal › Article › Research › peer-review

  23. Published

    Temperature impact on the mechanical and fatigue behavior of a non-crystallizing rubber

    Schieppati, J., Schrittesser, B., Wondracek, A., Robin, S., Holzner, A. & Pinter, G., 23 Nov 2020, In: International Journal of Fatigue. 144.2021, March, 8 p., 106050.

    Research output: Contribution to journal › Article › Research › peer-review

  24. Published

    Effect of polyethylene and polypropylene cross-contamination on slow crack growth resistance

    Messiha, M., Frank, A., Koch, T., Arbeiter, F. & Pinter, G., 16 Nov 2020, In: International journal of polymer analysis and characterization. 25, 8, p. 649-666 18 p.

    Research output: Contribution to journal › Article › Research › peer-review

  25. Published

    Optimierte Polymer-Rohrwerkstoffe für effiziente Drainagesysteme in Tunnelbauwerken—PolyDrain Teil II

    Arbeiter, F., Eichinger, S., Rieß, G., Schachinger, T., Boch, R., Wenighofer, R., Galler, R., Hausberger, A., Strobl, E., Stur, M., Saliger, F., Steiner, M., Dietzel, M. & Pinter, G., 6 Nov 2020, In: Berg- und hüttenmännische Monatshefte : BHM. 165.2020, 11, p. 623-630 8 p.

    Research output: Contribution to journal › Article › Research

  26. Published

    Using Compliant Interlayers as Crack Arresters in 3-D-Printed Polymeric Structures

    Arbeiter, F., Petersmann, S., Wiener, J., Oesterreicher, F., Spörk, M. & Pinter, G. G., 1 Nov 2020, In: Materials Performance and Characterization. 9, 5, 13 p.

    Research output: Contribution to journal › Article › Research › peer-review

  27. E-pub ahead of print

    Systematic analysis of the mechanical anisotropy of fibre-reinforced polymer specimens produced by laser sintering

    Khudiakova, A., Berer, M., Niedermair, S., Plank, B., Truszkiewicz, E., Meier, G., Stepanovsky, H., Wolfahrt, M., Pinter, G. & Lackner, J., 17 Oct 2020, (E-pub ahead of print) In: Additive Manufacturing. 36.2020, December, 14 p., 101671.

    Research output: Contribution to journal › Article › Research › peer-review

  28. Published

    Precise Correlation of Contact Area and Forces in the Unstable Friction between a Rough Fluoroelastomer Surface and Borosilicate Glass

    Wang, C., Bonyadi, S. Z., Grün, F., Pinter, G., Hausberger, A. & Dunn, A. C., 16 Oct 2020, In: Materials. 13.2020, 20, p. 1-16 16 p., 4615.

    Research output: Contribution to journal › Article › Research › peer-review

  29. Published

    J-testing of polymers via the load separation criterion based ESIS TC4 procedure: Effect of the specimen size

    Gosch, A., Arbeiter, F. J., Agnelli, S., Berer, M., Pinter, G. & Baldi, F., Sept 2020, In: Polymer Testing. 89, September, 10 p., 106637.

    Research output: Contribution to journal › Article › Research › peer-review

  30. Published

    Viscoelastic Behavior of Glass-Fiber-Reinforced Silicone Composites Exposed to Cyclic Loading

    Beter, J., Schrittesser, B., Lechner, B., Mansouri, M. R., Marano, C., Fuchs, P. F. & Pinter, G., 19 Aug 2020, In: Polymers. 12.2020, 9, 17 p., 1862.

    Research output: Contribution to journal › Article › Research › peer-review

  31. Published

    Experimental method for creep characterization of polymeric foam materials in media immersion

    Pilz, G., Guttmann, P., Oesterreicher, F. & Pinter, G. G., 30 Jul 2020, In: Mechanics of time-dependent materials. 24.2020, December, p. 421-433 13 p.

    Research output: Contribution to journal › Article › Research › peer-review

  32. Published

    Applicability of the load separation criterion in J-testing of polymers: Effect of the specimen size

    Gosch, A., Arbeiter, F., Agnelli, S., Berer, M., Pinter, G. G. & Baldi, F., 29 Jun 2020.

    Research output: Contribution to conference › Abstract

  33. Published

    Influence of Fiber Orientation and Adhesion Properties On Tailored Fiber-reinforced Elastomers

    Beter, J., Schrittesser, B., Meier, G., Fuchs, P. F. & Pinter, G., 4 May 2020, In: Applied composite materials. 27.2020, 3, p. 149-164 16 p.

    Research output: Contribution to journal › Article › Research › peer-review

  34. Published

    Mechanical properties of polymeric implant materials produced by extrusion-based additive manufacturing

    Petersmann, S., Spörk, M., Van De Steene, W., Üçal, M., Wiener, J., Pinter, G. G. & Arbeiter, F., 1 Apr 2020, In: Journal of the Mechanical Behavior of Biomedical Materials. 104.2020, April, 13 p., 103611.

    Research output: Contribution to journal › Article › Research › peer-review

  35. Published

    Comparison and Impact of Different Fiber Debond Techniques on Fiber Reinforced Flexible Composites

    Beter, J., Schrittesser, B., Maroh, B., Sarlin, E., Fuchs, P. F. & Pinter, G., 18 Feb 2020, In: Polymers. 12.2020, 2, 11 p., 472.

    Research output: Contribution to journal › Article › Research › peer-review

  36. Published

    Automated monitoring of the crack propagation in mode I testing of thermoplastic composites by means of digital image correlation

    Khudiakova, A., Grasser, V., Blumenthal, C., Wolfahrt, M. & Pinter, G. G., 1 Feb 2020, In: Polymer Testing. 82.2020, February, 106304.

    Research output: Contribution to journal › Article › Research › peer-review

  37. Published

    Investigation of fibre orientation and notch support of short glass fibre lot reinforced thermoplastics

    Stadler, G., Primetzhofer, A., Pinter, G. & Grün, F., 1 Feb 2020, In: International Journal of Fatigue. 131.2020, February, 8 p., 105284.

    Research output: Contribution to journal › Article › Research › peer-review

  38. Published

    Flow-speed-controlled quality optimisation for one-shot-hybrid RTM parts

    Hergan, P., Fauster, E., Perkonigg, D., Pinter, G. & Schledjewski, R., 2 Jan 2020, In: Advanced Manufacturing: Polymer and Composites Science. 6, 1, p. 29-37 9 p.

    Research output: Contribution to journal › Article › Research › peer-review

  39. Published

    Accelerated approaches for life-time prediction of composites under static loads

    Gloggnitzer, S., Guttmann, P. & Pinter, G., 1 Jan 2020, ECCM 2018 - 18th European Conference on Composite Materials. (ECCM 2018 - 18th European Conference on Composite Materials).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  40. Published

    Increased reliability of modified polyolefin backsheet over commonly used polyester backsheets for crystalline PV modules

    Omazic, A., Oreski, G., Edler, M., Eder, G. C., Hirschl, C., Pinter, G. & Erceg, M., 1 Jan 2020, In: Journal of Applied Polymer Science. 48899.

    Research output: Contribution to journal › Article › Research › peer-review

  41. Published

    Lifetime calculation of soil-loaded non-pressure polymer pipes

    Poduška, J., Hutař, P., Frank, A., Pinter, G. & Náhlík, L., 2020, Advances in Fracture and Damage Mechanics XVIII. Paipetis, S. A. & Aliabadi, F. M. H. (eds.). p. 141-146 6 p. (Key Engineering Materials; vol. 827 KEM).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  42. Published

    Methods for automated crack length detection in fracture mechanical fatigue tests of unreinforced polymers

    Gosch, A., Geier, J., Arbeiter, F., Berer, M. & Pinter, G. G., 2020, In: Procedia structural integrity / ESIS, European Structural Integrity Society. 2020, 28

    Research output: Contribution to journal › Article › Research › peer-review

  43. Published

    Methods for automated crack length detection in fracture mechanical fatigue tests of unreinforced polymers

    Gosch, A., Geier, J., Arbeiter, F., Berer, M. & Pinter, G., 2020, In: Procedia Structural Integrity. 28, p. 1184-1192 9 p.

    Research output: Contribution to journal › Conference article › peer-review

  44. Accepted/In press

    Structural integrity of shrinkage and warpage optimized polypropylene produced by material extrusion-based additive manufacturing

    Petersmann, S., Spörk, M., Wiener, J., Pinter, G. G. & Arbeiter, F., 2020, (Accepted/In press).

    Research output: Contribution to conference › Abstract › peer-review

  45. Published

    Tailoring composite architecture to improve the toughness of pipe grade materials

    Wiener, J., Arbeiter, F., Frank, A. & Pinter, G., 2020, SPE ANTEC 2020: The Annual Technical Conference for Plastic Professionals. p. 782-786 5 p. (Annual Technical Conference - ANTEC, Conference Proceedings; vol. 2).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  46. 2019
  47. Published

    Fatigue Crack Propagation under Mixed Mode I and III in Polyoxymethelene Homopolymer

    Slavik, O., Hutař, P., Gosch, A., Berer, M., Vojtek, T., Arbeiter, F., Pinter, G. G. & Nahlik, L., 13 Dec 2019, In: Key Engineering Materials. 2019, 827

    Research output: Contribution to journal › Article › Research › peer-review

  48. E-pub ahead of print

    Application of the material inhomogeneity effect for the improvement of fracture toughness of a brittle polymer

    Tiwari, A., Wiener, J., Arbeiter, F., Pinter, G. & Kolednik, O., 4 Dec 2019, (E-pub ahead of print) In: Engineering Fracture Mechanics. 224.2020, March, 16 p., 106776.

    Research output: Contribution to journal › Article › Research › peer-review

  49. E-pub ahead of print

    Bioinspired toughness improvement through soft interlayers in mineral reinforced polypropylene

    Wiener, J., Arbeiter, F., Tiwari, A., Kolednik, O. & Pinter, G., 19 Nov 2019, (E-pub ahead of print) In: Mechanics of materials. 140.2020, January, 13 p., 103243.

    Research output: Contribution to journal › Article › Research › peer-review

  50. E-pub ahead of print

    Optimierte Polymer-Rohrwerkstoffe für effiziente Drainagesysteme in Tunnelbauwerken - PolyDrain

    Arbeiter, F., Eichinger, S., Rieß, G., Schachinger, T., Boch, R., Wenighofer, R., Galler, R., Hausberger, A., Strobl, E., Stur, M., Saliger, F., Steiner, M., Dietzel, M. & Pinter, G. G., 18 Nov 2019, (E-pub ahead of print) In: Berg- und hüttenmännische Monatshefte : BHM. 164.2019, 12, p. 545-551 7 p.

    Research output: Contribution to journal › Article › Research

  51. Published

    Fracture mechanics description of the defect in rolling cylinder

    Dlhy, P., Poduška, J., Berer, M., Gosch, A., Pinter, G. G. & Hutař, P., 4 Nov 2019.

    Research output: Contribution to conference › Paper › peer-review

  52. Published

    Soil Load on Plastic Pipe and its Influence on Lifetime

    Poduška, J., Hutař, P., Frank, A., Kučera, J., Sadílek, J., Pinter, G. & Náhlík, L., 1 Nov 2019, In: Strojnícky časopis = Journal of mechanical engineering. 69, 3, p. 101-106 6 p.

    Research output: Contribution to journal › Article › Research › peer-review

  53. E-pub ahead of print

    Mixed Mode I/III fatigue fracture characterization of Polyoxymethylene

    Gosch, A., Berer, M., Hutař, P., Slavik, O., Vojtek, T., Arbeiter, F. & Pinter, G. G., 13 Sept 2019, (E-pub ahead of print) In: International Journal of Fatigue. 130.2020, January, p. 105269 11 p.

    Research output: Contribution to journal › Article › Research › peer-review

  54. Published

    Fretting behavior of thermoplastic polyurethanes

    Wang, C., Hausberger, A., Berer, M., Pinter, G., Grün, F. & Schwarz, T., 1 Sept 2019, In: Lubricants. 7, 9, 73.

    Research output: Contribution to journal › Article › Research › peer-review

  55. Published

    NOVEL APPROACHES FOR LIFETIME PREDICTION OF COMPOSITE MATERIALS FOR STRUCTURAL APPLICATIONS UNDER STATIC LOADS

    Pilz, G., Gloggnitzer, S., Schneider, C. & Pinter, G. G., Sept 2019.

    Research output: Contribution to conference › Paper › peer-review

  56. E-pub ahead of print

    Impact Optimization of 3D‐Printed Poly(methyl methacrylate) for Cranial Implants

    Petersmann, S., Spoerk, M., Huber, P., Lang, M., Pinter, G. & Arbeiter, F., 30 Aug 2019, (E-pub ahead of print) In: Macromolecular materials and engineering. 304.2019, 11, 10 p., 1900263.

    Research output: Contribution to journal › Article › Research › peer-review

Previous 1 2 3 4 5 6 7 8 ...16 Next
View graph of relations

Contact

Phone: 2100

Curriculum vitae

Gerald Pinter Öffentliches Curriculum

Latest Research Output

View more (758)