Florian Summer

(Former)

Publications / Theses

  1. 2021
  2. Published

    The tribological performance of silver in aircraft turbine load cases

    Renhart, P., Summer, F., Grun, F., Posch, C. & Eder, A., 14 Jul 2021, In: Tribology International. 2021, 163, 15 p.

    Research output: Contribution to journalArticleResearchpeer-review

  3. 2020
  4. Published

    Cumulative damage assessment of tribological durability limits

    Pusterhofer, M., Summer, F., Gódor, I. & Grün, F., 15 Sept 2020, In: Wear. 456, 15 p., 203318.

    Research output: Contribution to journalArticleResearchpeer-review

  5. Published
  6. Published

    Assessment of Shaft Surface Structures on the Tribological Behavior of Journal Bearings by Physical and Virtual Simulation

    Pusterhofer, M., Summer, F., Maier, M. & Grün, F., 15 Jan 2020, In: Lubricants. 8.2020, 1, 16 p.

    Research output: Contribution to journalArticleResearchpeer-review

  7. Published

    Close-to-Application Test Methodology Validated by a Baseline Study for Novel Bearing Developments in Aircraft Turbines

    Renhart, P., Summer, F., Grun, F. & Eder, A., 9 Jan 2020, In: Lubricants. 8.2020, 1, p. 1-14 14 p.

    Research output: Contribution to journalArticleResearchpeer-review

  8. Published

    Friction and Wear Performance of Various Polymer Coatings for Journal Bearings under Stop Start Sliding

    Summer, F., Grun, F. & Ravenhill, E. R., 1 Jan 2020, In: Lubricants. 8.2020, 1, 14 p., 1.

    Research output: Contribution to journalArticleResearchpeer-review

  9. 2019
  10. Published

    Development of a Model Test System for a Piston Ring/Cylinder Liner-Contact with Focus on Near-to-Application Seizure Behaviour

    Pusterhofer, M., Summer, F., Wuketich, D. & Grun, F., 22 Nov 2019, In: Lubricants. 7.2019, 12, p. 104-115 12 p., 104.

    Research output: Contribution to journalArticleResearchpeer-review

  11. Published

    A baseline study for developing novel coatings for high performance journal bearings in aircraft-turbines

    Renhart, P., Summer, F. & Grun, F., 13 Jun 2019, ECOTRIB 2019. Österreichische Tribologische Gesellschaft, p. 70 1 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  12. Published
  13. Published

    Challenges of friction reduction of engine plain bearings – Tackling the problem with novel bearing materials

    Summer, F., Grün, F., Offenbecher, M. & Taylor, S., 1 Mar 2019, In: Tribology International. 131.2019, March, p. 238-250 13 p.

    Research output: Contribution to journalArticleResearchpeer-review

  14. Published

    Novel model test configuration for investigation of cam/tappet contacts

    Grun, F., Gódor, I., Summer, F. & Moizan, S., 2019, p. 1-2.

    Research output: Contribution to conferenceAbstractpeer-review

  15. Published

    Tribological performance of polymer bearings under stop start operation

    Summer, F., Grun, F., Offenbecher, M. & Taylor, S., 2019, Ecotrib 2019 - Book of Abstracts.

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  16. 2018
  17. Published

    Evaluation of wear phenomena of journal bearings by close to component testing and application of a numerical wear assessment

    Bergmann, P., Grün, F., Summer, F. & Gódor, I., 26 Jul 2018, In: Lubricants. 2018, 3, 25 p., 65.

    Research output: Contribution to journalArticleResearchpeer-review

  18. Published

    Effect of temperature on wear and tribofilm formation in highly loaded DLC-steel line contacts

    Moder, J., Grün, F., Summer, F., Gasperlmair, T. & Andritschky, M., 1 Jul 2018, In: Tribology International. 123, p. 120-129 10 p.

    Research output: Contribution to journalArticleResearchpeer-review

  19. Published

    Application of high performance composite polymers with steel counterparts in dry rolling/sliding contacts

    Moder, J., Grün, F., Summer, F., Kohlhauser, M. & Wohlfahrt, M., 1 Apr 2018, In: Polymer Testing. 66, p. 371-382 12 p.

    Research output: Contribution to journalArticleResearchpeer-review

  20. Published

    A novel approach for modeling surface effects in hydrodynamic lubrication

    Pusterhofer, M., Bergmann, P., Summer, F., Grün, F. & Brand, C., 12 Mar 2018, In: Lubricants. 6, 1, 27.

    Research output: Contribution to journalArticleResearchpeer-review

  21. 2017
  22. Published

    Influence of tribofilm formation in DLC-steel line contacts on friction

    Moder, J., Grun, F., Summer, F., Gasperlmair, T. & Andritschky, M., 5 Sept 2017, p. 63. 1 p.

    Research output: Contribution to conferenceAbstractpeer-review

  23. Published

    Tribology of journal bearings: Start stop operation as life-time factor

    Summer, F., Grün, F., Offenbecher, M., Taylor, S. & Lainé, E., Jul 2017, In: Tribologie und Schmierungstechnik. 4/17, p. 44-54

    Research output: Contribution to journalArticleResearchpeer-review

  24. Published

    NOVEL LEAD FREE BEARING OVERLAY SOLUTIONS WITH LOW FRICTION PERFORMANCE

    Summer, F., Grün, F., Offenbecher, M., Taylor, S. & Lainé, E., 7 Jun 2017, Proceedings of the 6th European COnference on TRIBology. Ljubljana, Slovenia

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  25. Published

    Damage Equivalent Test Methodologies as Design Elements for Journal Bearing Systems

    Summer, F., Bergmann, P. & Grun, F., 2017, In: Lubricants. 47, 5, 16 p.

    Research output: Contribution to journalArticleResearchpeer-review

  26. Published
  27. 2016
  28. Published

    Journal bearing systems: Effect of lubricant viscosity on frictional losses and lifetime performance

    Summer, F., Grün, F., Godor, I., Offenbecher, M., Lainé, E. & Taylor, S., 23 Nov 2016.

    Research output: Contribution to conferencePresentationResearchpeer-review

  29. Published

    Journal bearing systems: Effect of lubricant viscosity on frictional losses and lifetime performance

    Summer, F., Grün, F., Godor, I., Offenbecher, M., Lainé, E. & Taylor, S., 23 Nov 2016, Conference proceedings of ÖTG Symposium 2016. p. 127-134

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  30. Published

    Laboratory Test Methodologies for Journal Slide Bearing Life Time Assessment

    Bergmann, P., Summer, F. & Grün, F., 22 Sept 2016.

    Research output: Contribution to conferencePresentationResearchpeer-review

  31. Published

    Laboratory Test Methodologies for Journal Slide Bearing Life Time Assessment

    Summer, F., Bergmann, P. & Grün, F., 22 Sept 2016, Proceedings of 33rd Danubia-Adria Symposium. Portoroz, Slowenien, p. 106-107

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  32. Published

    Laboratory Test Methodologies for Journal Slide Bearing Life Time Assessment

    Summer, F., Bergmann, P. & Grün, F., 22 Sept 2016.

    Research output: Contribution to conferencePosterResearchpeer-review

  33. Published

    Sind mittels laboratorischer Modellprüftechnik erzielte Ergebnisse verwertbar ?

    Grün, F., Godor, I., Moder, J., Bergmann, P. & Summer, F., 11 May 2016, p. 1-43.

    Research output: Contribution to conferencePresentationResearch

  34. Published

    Sind mittels laboratorischer Modellprüftechnik erzielte Ergebnisse verwertbar ?

    Grün, F., Godor, I., Moder, J., Bergmann, P. & Summer, F., 2016, Proceedings des DVM Arbeitskreises Zuverlässigkeit tribologischer Systeme. p. 1-43

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  35. Published
  36. 2015
  37. Published

    START-STOP OPERATION AS INFLUENCE FACTOR ON PLAIN BEARING LIFETIME

    Summer, F., Grün, F., Offenbecher, M. & Lainé, E., 4 Nov 2015.

    Research output: Contribution to conferencePresentationResearch

  38. Published

    Tribological study of crankshaft bearing systems: Comparison of forged steel and cast iron counterparts under start–stop operation

    Summer, F., Grün, F., Schiffer, J., Godor, I. & Papadimitriou, I., 8 Jul 2015, In: Wear. 338-339, p. 232-241

    Research output: Contribution to journalArticleResearchpeer-review

  39. Published

    Tribometric assessment of start stop journal bearing wear with the aid of a component close test methodology

    Summer, F., Grün, F., Godor, I., Offenbecher, M. & Lainé, E., 3 Jun 2015, Proceedings.

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  40. Published

    Tribological in-situ evaluation of lubricated contacts of real-life engineering materials

    Grün, F., Godor, I., Summer, F., Bergmann, P. & Moder, J., 2015, Proceedings of 3rd OilDoc Conference and Exhibition. Rosenheim

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  41. 2014
  42. Published

    Tribological investigations of journal bearings by means of a close to component test methodology

    Bergmann, P., Summer, F., Grün, F., Godor, I., Offenbecher, M. & Lainé, E., 2014, Tribologie in Industrie und Forschung. Werkstoffe, Konstruktion und Technologie. Vortragsunterlagen. p. 113-121

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  43. Published

    Tribological performance of forged steel and cast iron crankshafts on model scale

    Summer, F., Grün, F., Schiffer, J., Gódor, I. & Papadimitriou, I., 2014, 5th World Tribology Congress, WTC 2013. Vol. 3. p. 2155-2158 4 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  44. Published

    Tribometric performance of polymer overlays by contrast with other bearing materials

    Summer, F., Grün, F., Godor, I., Offenbecher, M. & Lainé, E., 2014, Symposium 2014 - Tribologie in Industrie und Forschung. p. 159-166

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  45. 2013
  46. Published

    Comprehensive Study of ZDDP-tribofilms Formed under Soft Contact Conditions

    Pondicherry, K., Grün, F., Summer, F., Godor, I., Lainé, E. & Offenbecher, M., 2013, Proceedings of 5th World Tribology Congress (WTC). p. 1-3

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  47. Published

    Nano-Mechanical and Chemical Characterization of Tribofilms Formed Under Conformal Contact Conditions

    Pondicherry, K., Schöberl, T., Grün, F., Summer, F., Godor, I., Lainé, E. & Offenbecher, M., 2013, Proceedings of 68th Annual STLE Meeting. p. 1-3

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  48. Published

    Tribological performance of forged steel and cast iron crankshafts on model scale

    Summer, F., Grün, F., Schiffer, J., Godor, I. & Papadimitriou, I., 2013, World Tribology Congress 2013. p. 753-756

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  49. Published

    Tribological performance of forged steel and cast iron crankshafts on model scale

    Summer, F., Grün, F., Schiffer, J., Godor, I. & Papadimitriou, I., 2013.

    Research output: Contribution to conferencePosterResearchpeer-review

  50. 2012
  51. Published

    Tribological functionality of aluminium sliding materials with hard phases under lubricated conditions

    Grün, F., Summer, F., Pondicherry, K. S., Gódor, I., Offenbecher, M. & Lainé, E., 1 Dec 2012, In: Wear. 298-299.2013, 15 February, p. 127-134 8 p.

    Research output: Contribution to journalArticleResearchpeer-review

  52. Published

    Effect of counterpart material on the tribological performances of Al- and Cu-based sliding materials

    Summer, F., Grün, F., Pondicherry, K., Godor, I., Offenbecher, M. & Lainé, E., 2012.

    Research output: Contribution to conferencePosterResearchpeer-review

  53. Published

    Effect of counterpart material on the tribological performances of Al- and Cu-based sliding materials

    Summer, F., Grün, F., Pondicherry, K., Godor, I., Offenbecher, M. & Lainé, E., 2012, 3rd Fatigue Symposium Leoben Conference Transcript. p. 311-314

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  54. Published

    Synergy between secondary phases in aluminium based tribomaterials and lubrucant additives

    Pondicherry, K., Grün, F., Summer, F., Godor, I., Lainé, E. & Offenbecher, M., 2012, 15th Nordic Symposium on Tribology. p. 1-6

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  55. Published

    Tribological funtionality of aluminium sliding materials with hard phases under lubricated conditions

    Grün, F., Summer, F., Pondicherry, K., Godor, I., Lainé, E. & Offenbecher, M., 2012, In: Wear. p. 127-134

    Research output: Contribution to journalArticleResearchpeer-review

  56. 2011
  57. Published

    Interactions between heterogeneous aluminium sliding materials and lubricants

    Grün, F., Summer, F., Pondicherry, K., Godor, I., Lainé, E. & Offenbecher, M., 2011, Proceedings of ECOTRIB Conference 2011. p. 703-708

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  58. Published

    Tribologische Versuche an Gleitwerkstoffen

    Grün, F., Summer, F. & Godor, I., 2011

    Research output: Book/ReportCommissioned reportTransferpeer-review

  59. Published

    Tribologische Wirkungsweisen sekundärer Hart- und Weichphasen in geschmierten, aluminiumbasierten Gleitsystemen

    Summer, F., Grün, F., Pondicherry, K., Godor, I., Lainé, E. & Offenbecher, M., 2011, Proceedings Symposium 2011 der Österreichischen Tribologischen Gesellschaft. p. 57-66

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  60. Published
  61. Published

    Untersuchung der tribomechanischen und werkstoffphysikalischen Eiegnschaften an gefüllten und ungefüllten TPU-Modellwerkstoffen

    Hausberger, A., Strohhäussl, B., Summer, F., Godor, I. & Schwarz, T., 2011, Reibung, Schmierung und Verschleiß - Forschung und praktische Anwendungen. p. 56/1-56/11

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

Previous 1 2 Next