Florian Grün

1 - 100 out of 341Page size: 100

Publications / Theses

  1. 2021
  2. Published

    Novel S-N curve for different hardened layers in point and line contact

    Trausmuth, A. & Grün, F., Dec 2021, In: International Journal of Fatigue. 153, 106439.

    Research output: Contribution to journal › Article › Research › peer-review

  3. Published

    On an experimental-computational approach for localised durability assessment of sliding contacts

    Pusterhofer, M. & Grun, F., 14 Aug 2021, In: Wear. 2021

    Research output: Contribution to journal › Article › Research › peer-review

  4. Published

    The tribological performance of silver in aircraft turbine load cases

    Renhart, P., Summer, F., Grun, F., Posch, C. & Eder, A., 14 Jul 2021, In: Tribology International. 2021, 163, 15 p.

    Research output: Contribution to journal › Article › Research › peer-review

  5. Published

    Effect of nano-clay addition and heat treatment on tensile and stress-controlled low-cycle fatigue behaviors of aluminum-silicon alloy

    Basiri, A., Dadashi, A., Azadi, M., Winter, G., Seisenbacher, B. & Grün, F., Jul 2021, In: Frattura ed Integrita Strutturale. 15, 57, p. 373-397 25 p.

    Research output: Contribution to journal › Article › Research › peer-review

  6. Published

    Effect of Surface Layer on the Fatigue Strength of Selectively Laser Melted 17-4 PH Steel

    Leitner, M., Schneller, W., Springer, S. & Grün, F., 13 Apr 2021, In: Journal of Materials Engineering and Performance.

    Research output: Contribution to journal › Article › Research › peer-review

  7. Published

    Fatigue strength assessment of additively manufactured metallic structures considering bulk and surface layer characteristics

    Schneller, W., Leitner, M., Pomberger, S., Grün, F., Leuders, S., Pfeifer, T. & Jantschner, O., Apr 2021, In: Additive Manufacturing. 40, 101930.

    Research output: Contribution to journal › Article › Research › peer-review

  8. Published

    Model Calibration and Data Set Determination Considering the Local Micro-Structure for Short Fiber Reinforced Polymers

    Primetzhofer, A., Stadler, G., Pinter, G. & Grün, F., 27 Jan 2021, In: Journal of composites science.

    Research output: Contribution to journal › Article › Research › peer-review

  9. Published

    A novel high-frequency fatigue testing methodology for small thin-walled structures in the HCF/VHCF regime

    Himmelbauer, F., Tillmanns, M., Winter, G., Gruen, F. & Kiesling, C., 19 Jan 2021, In: International Journal of Fatigue. 146.2021, May, 10 p., 106146.

    Research output: Contribution to journal › Article › Research › peer-review

  10. Published

    Phenomenological wear model of case-hardened 20MnCr5 under cyclic line rolling contact

    Trausmuth, A., Godor, I. & Grün, F., 7 Jan 2021, In: Wear. 470-471.2021, 15 April, 16 p., 203607.

    Research output: Contribution to journal › Article › Research › peer-review

  11. 2020
  12. Published

    Investigation of the influence of viscoelastic behaviour on the lifetime of short fibre reinforced polymers

    Stadler, G., Primetzhofer, A., Jerabek, M., Pinter, G. & Grün, F., Dec 2020, In: Polymers. 12, 12, p. 1-13 13 p., 2874.

    Research output: Contribution to journal › Article › Research › peer-review

  13. E-pub ahead of print

    Fatigue strength estimation methodology of additively manufactured metallic bulk material

    Schneller, W., Leitner, M., Leuders, S., Sprauel, J. M., Grün, F., Pfeifer, T. & Jantschner, O., 4 Nov 2020, (E-pub ahead of print) In: Additive Manufacturing. 39.2021, March, 13 p., 101688.

    Research output: Contribution to journal › Article › Research › peer-review

  14. Published

    Precise Correlation of Contact Area and Forces in the Unstable Friction between a Rough Fluoroelastomer Surface and Borosilicate Glass

    Wang, C., Bonyadi, S. Z., Grün, F., Pinter, G., Hausberger, A. & Dunn, A. C., 16 Oct 2020, In: Materials. 13.2020, 20, p. 1-16 16 p., 4615.

    Research output: Contribution to journal › Article › Research › peer-review

  15. E-pub ahead of print

    Investigation and simulation of the age-dependent behaviour of an aluminium alloy under thermomechanical loading

    Seisenbacher, B., Winter, G. & Grün, F., 15 Oct 2020, (E-pub ahead of print) In: Mechanics of materials. 151.2020, December, 11 p., 103612.

    Research output: Contribution to journal › Article › Research › peer-review

  16. Published

    Cumulative damage assessment of tribological durability limits

    Pusterhofer, M., Summer, F., Gódor, I. & Grün, F., 15 Sept 2020, In: Wear. 456, 15 p., 203318.

    Research output: Contribution to journal › Article › Research › peer-review

  17. Published

    Evaluation of tensile and low-cycle fatigue properties at elevated temperatures in piston aluminum-silicon alloys with and without nano-clay-particles and heat treatment

    Azadi, M., Bahmanabadi, H., Gruen, F. & Winter, G., 11 May 2020, In: Materials Science and Engineering A. 788.2020, 24 June, 16 p., 139497.

    Research output: Contribution to journal › Article › Research › peer-review

  18. Published

    Modelling the effect of ageing on the yield strength of an aluminium alloy under cyclic loading at different ageing temperatures and test temperatures

    Seisenbacher, B., Winter, G. & Grün, F., 13 Apr 2020, In: International Journal of Fatigue. 137.2021, August, 9 p., 105635.

    Research output: Contribution to journal › Article › Research › peer-review

  19. Published

    Effect of HIP Treatment on Microstructure and Fatigue Strength of Selectively Laser Melted AlSi10Mg

    Schneller, W., Leitner, M., Springer, S., Grun, F. & Taschauer, M., 1 Apr 2020, Selective Laser Melting: Materials and Applications. p. 4-12

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research

  20. Published

    Influence of specimen diameter size on the deformation behaviour and short-term strength range of an aluminum alloy

    Seisenbacher, B., Klösch, R., Winter, G. & Grün, F., Apr 2020, In: MP materials testing : Materialprüfung . 62.2020, 4, p. 345-350 6 p.

    Research output: Contribution to journal › Article › Research › peer-review

  21. Published

    Tribologie im Maschinenbau: In Mobilität und anderen Bereichen

    Grün, F., 2 Mar 2020, Neue Technologien und Innovationen in der Fahrzeugtechnik XVII.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  22. Published

    Investigation of fibre orientation and notch support of short glass fibre lot reinforced thermoplastics

    Stadler, G., Primetzhofer, A., Pinter, G. & Grün, F., 1 Feb 2020, In: International Journal of Fatigue. 131.2020, February, 8 p., 105284.

    Research output: Contribution to journal › Article › Research › peer-review

  23. Published

    Tribological investigations with near eutectic AlSi alloys found in engine vane pumps – Characterization of the material tribo-functionalities

    Summer, F., Pusterhofer, M., Grün, F. & Gódor, I., 1 Feb 2020, In: Tribology International. 146.2020, June, 13 p., 106236.

    Research output: Contribution to journal › Article › Research › peer-review

  24. Published

    Assessment of Shaft Surface Structures on the Tribological Behavior of Journal Bearings by Physical and Virtual Simulation

    Pusterhofer, M., Summer, F., Maier, M. & Grün, F., 15 Jan 2020, In: Lubricants. 8.2020, 1, 16 p.

    Research output: Contribution to journal › Article › Research › peer-review

  25. Published

    Close-to-Application Test Methodology Validated by a Baseline Study for Novel Bearing Developments in Aircraft Turbines

    Renhart, P., Summer, F., Grun, F. & Eder, A., 9 Jan 2020, In: Lubricants. 8.2020, 1, p. 1-14 14 p.

    Research output: Contribution to journal › Article › Research › peer-review

  26. Published

    Friction and Wear Performance of Various Polymer Coatings for Journal Bearings under Stop Start Sliding

    Summer, F., Grun, F. & Ravenhill, E. R., 1 Jan 2020, In: Lubricants. 8.2020, 1, 14 p., 1.

    Research output: Contribution to journal › Article › Research › peer-review

  27. Published

    Material behaviour of a dual hardening steel under thermomechanical loading

    Seisenbacher, B., Hofinger, M., Winter, G. & Grün, F., Jan 2020, In: Fatigue & fracture of engineering materials & structures : Fatigue and fracture of engineering materials and structures. 43, 1, p. 191-200 10 p.

    Research output: Contribution to journal › Article › Research › peer-review

  28. Published

    Effect of surface layer on the fatigue strength of additively manufactured 17-4 PH steel

    Leitner, M., Schneller, W., Springer, S. & Grun, F., 2020.

    Research output: Contribution to conference › Paper

  29. Published

    Numerical Fatigue Analysis of Induction-Hardened and Mechanically Post-Treated Steel Components

    Leitner, M., Aigner, R. & Grun, F., 2020, Advances in CAD/CAM/CAE Technologies. Multidisciplinary Digital Publishing Institute (MDPI)

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research

  30. 2019
  31. Published

    Development of a Model Test System for a Piston Ring/Cylinder Liner-Contact with Focus on Near-to-Application Seizure Behaviour

    Pusterhofer, M., Summer, F., Wuketich, D. & Grun, F., 22 Nov 2019, In: Lubricants. 7.2019, 12, p. 104-115 12 p., 104.

    Research output: Contribution to journal › Article › Research › peer-review

  32. Published

    Influencing factors on the fatigue strength of selectively laser melted structures

    Schneller, W., Leitner, M., Springer, S., Beter, F. & Grun, F., 20 Nov 2019.

    Research output: Contribution to conference › Poster › Research

  33. Published

    Effect of Post Treatment on the Microstructure, Surface Roughness and Residual Stress Regarding the Fatigue Strength of Selectively Laser Melted AlSi10Mg Structures

    Schneller, W., Leitner, M., Pomberger, S., Springer, S., Beter, F. & Grun, F., 16 Oct 2019, In: Journal of Manufacturing and Materials Processing. 2019, 3(4), 21 p., 89.

    Research output: Contribution to journal › Article › Research › peer-review

  34. Published

    Influence of surface roughness on additively manufactured aluminum components

    Springer, S., Schneller, W., Leitner, M. & Grun, F., 26 Sept 2019.

    Research output: Contribution to conference › Poster › Research

  35. Published

    Influence of surface roughness on additively manufactured aluminum components

    Springer, S., Schneller, W., Leitner, M. & Grun, F., 24 Sept 2019, 36th Danubia Adria Symposium on Advances in Experimental Mechanics: Extended Abstracts. Plzen, Czech Republic, p. 105-106

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  36. Published

    Fretting behavior of thermoplastic polyurethanes

    Wang, C., Hausberger, A., Berer, M., Pinter, G., Grün, F. & Schwarz, T., 1 Sept 2019, In: Lubricants. 7, 9, 73.

    Research output: Contribution to journal › Article › Research › peer-review

  37. Published

    Correlation of Tribological Behavior and Fatigue Properties of Filled and Unfilled TPUs

    Wang, C., Stiller, T., Hausberger, A., Pinter, G., Grün, F. & Schwarz, T., 20 Jul 2019, In: Lubricants. 7.2019, p. 1-18 18 p.

    Research output: Contribution to journal › Article › Research › peer-review

  38. Published

    Damage models of different hardness layers subjected to point contact

    Trausmuth, A., Godor, I. & Grün, F., 15 Jul 2019, In: Wear. 430-431.2019, July, p. 157-168 12 p.

    Research output: Contribution to journal › Article › Research › peer-review

  39. Published

    A baseline study for developing novel coatings for high performance journal bearings in aircraft-turbines

    Renhart, P., Summer, F. & Grun, F., 13 Jun 2019, ECOTRIB 2019. Österreichische Tribologische Gesellschaft, p. 70 1 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  40. Published

    Development of a model test system for a piston ring/cylinder liner-contact with focus on near-to-application seizure behaviour

    Pusterhofer, M., Wuketich, D., Summer, F. & Grun, F., 13 Jun 2019, ECOTRIB 2019. Österreichische Tribologische Gesellschaft, p. 1 1 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  41. Published

    Challenges of friction reduction of engine plain bearings – Tackling the problem with novel bearing materials

    Summer, F., Grün, F., Offenbecher, M. & Taylor, S., 1 Mar 2019, In: Tribology International. 131.2019, March, p. 238-250 13 p.

    Research output: Contribution to journal › Article › Research › peer-review

  42. Published

    Effect of hip treatment on microstructure and fatigue strength of selectively laser melted AlSi10Mg

    Schneller, W., Leitner, M., Springer, S., Grün, F. & Taschauer, M., 1 Mar 2019, In: Journal of Manufacturing and Materials Processing. 3, 1, 16.

    Research output: Contribution to journal › Article › Research › peer-review

  43. Published

    Lifetime assessment of anisotropic materials by the example short fibre reinforced plastic

    Primetzhofer, A., Stadler, G., Pinter, G. & Grün, F., 1 Mar 2019, In: International Journal of Fatigue. 120.2019, March, p. 294-302 9 p.

    Research output: Contribution to journal › Article › Research › peer-review

  44. Published

    Effect of HIP Treatment on Microstructure and Fatigue Strength of Selectively Laser Melted AlSi10Mg

    Schneller, W., Leitner, M., Springer, S., Grün, F. & Taschauer, M., 1 Feb 2019, In: Journal of Manufacturing and Materials Processing. 3.2019, 1, 9 p., 16.

    Research output: Contribution to journal › Article › Research › peer-review

  45. Published

    Data set determination for lifetime assessment of short fibre reinforced polymers

    Primetzhofer, A., Stadler, G., Pinter, G. G. & Grun, F., 1 Jan 2019, In: Zeitschrift Kunststofftechnik : Journal of plastics technology. 15.2019, 1, 26 p.

    Research output: Contribution to journal › Article › Research › peer-review

  46. Published

    Datensatzermittlung zur lebensdauervorhersage kurzfaserverstärkter kunststoffe

    Primetzhofer, A., Stadler, G., Grün, F. & Pinter, G., 1 Jan 2019, In: Zeitschrift Kunststofftechnik/Journal of Plastics Technology. 2019, 1, p. 1-26 26 p.

    Research output: Contribution to journal › Article › Research › peer-review

  47. Published

    Study of notch effect and fibre orientation on fatigue strength of short glass fibre reinforced polyamide

    Stadler, G., Primetzhofer, A., Pinter, G. & Grün, F., 1 Jan 2019, ECCM 2018 - 18th European Conference on Composite Materials. (ECCM 2018 - 18th European Conference on Composite Materials).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  48. Published

    Auslegung thermomechanisch gefertigter Strukturen

    Grun, F. & Leitner, M., 2019, Proceedings zu Neue Technologien und Innvoationen in der Fahrzeugtechnik XVI. Steyr, p. 1 30 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  49. Published

    Consideration of ageing effects during the TMF test on the stress-strain behaviour of an aluminium alloy

    Seisenbacher, B., Winter, G. (Co-editor) & Grun, F. (Co-editor), 2019.

    Research output: Contribution to conference › Abstract

  50. Published

    Effect of surface condition on the fatigue strength of selectively laser melted metallic structures

    Leitner, M., Schneller, W., Springer, S., Beter, F. & Grun, F., 2019, 72nd IIW Annual Assembly and International Conference: IIW Document XIII-WG4-171-19.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  51. Published

    Fatigue strength of welded joints and additively manufactured structures

    Grun, F. & Leitner, M., 2019, Proceedings International FEMFAT User Meeting 2019: Fatigue Analysis of Joint Connections.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  52. Published

    Influencing factors on the fatigue strength of selectively laser melted structures

    Schneller, W., Leitner, M., Springer, S., Beter, F. & Grun, F., 2019, Procedia Structural Integrity: Fatigue Design 2019, International Conference on Fatigue Design, 8th Edition. p. 556 - 565

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  53. Published

    Novel model test configuration for investigation of cam/tappet contacts

    Grun, F., Gódor, I., Summer, F. & Moizan, S., 2019, p. 1-2.

    Research output: Contribution to conference › Abstract › peer-review

  54. Published

    Numerical Fatigue Analysis of Induction-Hardened and Mechanically Post-Treated Steel Components

    Leitner, M., Aigner, R. & Grün, F., 2019, In: Machines : open access journal . 7.2019, 1, 1.

    Research output: Contribution to journal › Article › Research › peer-review

  55. Published

    Tribological performance of polymer bearings under stop start operation

    Summer, F., Grun, F., Offenbecher, M. & Taylor, S., 2019, Ecotrib 2019 - Book of Abstracts.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  56. 2018
  57. Published

    Lubrication Regime classification of hydrodynamic journal bearings by machine learning using Torque Data

    Moder, J., Bergmann, P. & Grün, F., 14 Dec 2018, In: Lubricants. 6, 4, 108.

    Research output: Contribution to journal › Article › Research › peer-review

  58. Published

    An investigation of fretting behavior of thermoplastic polyurethane for mechanical seal application

    Wang, C., Hausberger, A., Berer, M., Pinter, G., Grün, F. & Schwarz, T., 1 Dec 2018, In: Polymer Testing. 72, p. 271-284 14 p.

    Research output: Contribution to journal › Article › Research › peer-review

  59. Published

    Application of a √ area -Approach for Fatigue Assessment of Cast Aluminum Alloys at Elevated Temperature

    Aigner, R., Garb, C., Leitner, M., Stoschka, M. & Grün, F., Dec 2018, In: Metals : open access journal . 8, 12

    Research output: Contribution to journal › Article › Research › peer-review

  60. Published

    Relationship between fatigue and tribological performance of Thermoplastic Polyurethanes (TPU)

    Wang, C., Stiller, T., Hausberger, A., Grun, F., Pinter, G. G. & Schwarz, T., 25 Sept 2018, Proceedings of the 3rd International conference on Polymer Tribology.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  61. Published

    Fatigue and Fracture Behavior of Induction-Hardened and Superimposed Mechanically Post-treated Steel Surface Layers

    Leitner, M., Gruen, F., Tuncali, Z. & Chen, W., Sept 2018, In: Journal of Materials Engineering and Performance. 27, 9, p. 4881-4892

    Research output: Contribution to journal › Article › Research › peer-review

  62. Published

    Evaluation of wear phenomena of journal bearings by close to component testing and application of a numerical wear assessment

    Bergmann, P., Grün, F., Summer, F. & Gódor, I., 26 Jul 2018, In: Lubricants. 2018, 3, 25 p., 65.

    Research output: Contribution to journal › Article › Research › peer-review

  63. Published

    Implementation of veriable amplitude tests in lifetime assecessment so short fibre reinforced polymeres

    Primetzhofer, A., Stadler, G., Pinter, G. & Grun, F., 4 Jul 2018, Proceeding of 7th International conference of composite materials.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  64. Published

    Effect of temperature on wear and tribofilm formation in highly loaded DLC-steel line contacts

    Moder, J., Grün, F., Summer, F., Gasperlmair, T. & Andritschky, M., 1 Jul 2018, In: Tribology International. 123, p. 120-129 10 p.

    Research output: Contribution to journal › Article › Research › peer-review

  65. Published

    Validation of a new high frequency testing technique in the VHCF regime – Fatigue properties of a 42CrMoS4 and X5CrNiCuNb16-4 steel

    Milošević, I., Renhart, P., Winter, G., Grün, F. & Kober, M., 1 Jul 2018, In: International Journal of Fatigue. 112, p. 198-205 8 p.

    Research output: Contribution to journal › Article › Research › peer-review

  66. Published

    Study of notch effect and fibre orientation on fatigue strength of short glass fibre reinforced polyamide

    Stadler, G., Primetzhofer, A., Pinter, G. G. & Grun, F., 27 Jun 2018.

    Research output: Contribution to conference › Presentation › Research

  67. Published

    Application of modified Kitagawa-Takahashi diagram for fatigue strength assessment of cast Al-Si-Cu alloys

    Garb, C., Leitner, M., Stauder, B., Schnubel, D. & Grün, F., 1 Jun 2018, In: International Journal of Fatigue. 111, p. 256-268 13 p.

    Research output: Contribution to journal › Article › Research › peer-review

  68. Published

    Fatigue life assessment regarding different influences on the HCF/VHCF behavior of a martensitic steel

    Milosevic, I., Seisenbacher, B., Winter, G., Grün, F. & Kober, M., 25 May 2018, In: MATEC Web of Conferences . 165, p. 20004 1 p.

    Research output: Contribution to journal › Article › Research › peer-review

  69. Published

    AT516367 (B1) - Prüfstand und Prüfverfahren mit verstellbarem Achsabstand zwischen Übertragungsprüfkörpern

    Grun, F. (Inventor) & Gódor, I. (Inventor), 15 May 2018, IPC No. G01M13/02 (2006.01), Patent No. AT516367(B1), 15 May 2018, Priority date 18 Sept 2014, Priority No. A50659/2014

    Research output: Patent

  70. Published

    Improved Approach to Determine the Material Parameters for a Combined Hardening Model

    Seisenbacher, B., Winter, G. & Grun, F., 16 Apr 2018, In: Materials sciences and applications : MSA.

    Research output: Contribution to journal › Article › Research › peer-review

  71. Published

    A modelling framework for the simulation of lubricated and dry line contacts

    Moder, J., Grün, F. & Gódor, I., 1 Apr 2018, In: Tribology International. 120, p. 34-46 13 p.

    Research output: Contribution to journal › Article › Research › peer-review

  72. Published

    Application of high performance composite polymers with steel counterparts in dry rolling/sliding contacts

    Moder, J., Grün, F., Summer, F., Kohlhauser, M. & Wohlfahrt, M., 1 Apr 2018, In: Polymer Testing. 66, p. 371-382 12 p.

    Research output: Contribution to journal › Article › Research › peer-review

  73. Published

    A novel approach for modeling surface effects in hydrodynamic lubrication

    Pusterhofer, M., Bergmann, P., Summer, F., Grün, F. & Brand, C., 12 Mar 2018, In: Lubricants. 6, 1, 27.

    Research output: Contribution to journal › Article › Research › peer-review

  74. Published

    Auslegung von Kunststoffbauteilen für den Einsatz im Automobil

    Grun, F. & Primetzhofer, A., 5 Mar 2018, Seminarunterlagen zu Kfz-Symposium 2018. p. 1-29 29 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  75. Published

    Experimental determination of highly dynamic forces during wood trunk comminution with a drum chipper

    Pichler, P., Leitner, M., Grun, F. & Guster, C., 11 Jan 2018, In: Journal of Agricultural Engineering. p. 1-16 16 p.

    Research output: Contribution to journal › Article › Research › peer-review

  76. Published

    Evaluation of wood material models for the numerical assessment of cutting forces in chipping processes

    Pichler, P., Leitner, M., Gruen, F. & Guster, C., Jan 2018, In: Wood Science and Technology. 52, 1, p. 281-294 14 p.

    Research output: Contribution to journal › Article › Research › peer-review

  77. Published

    Effect of Tungsten Carbides on Abrasive Wear of Hardfacing Coatings

    Pichler, P., Leitner, M., Grün, F. & Haßler, J., 2018, In: Advances in Tribology. 2018, 4047818.

    Research output: Contribution to journal › Article › Research › peer-review

  78. Published

    In-situ crack propagation measurement of high-strength steels including overload effects

    Simunek, D., Leitner, M. & Grün, F., 2018, In: Procedia Engineering. 213, p. 335-345 11 p.

    Research output: Contribution to journal › Article › Research › peer-review

  79. Published

    Numerical and analytical studies of a shaker test system for fatigue testing

    Renhart, P., Milosevic, I. & Grun, F., 2018, 34th Danubia Adria Symposium on Advances in Experimental Mechanics, 19 - 22 September 2017, Trieste, Italy. Eberhardsteiner, J., Růžička, M. & Cosmi, F. (eds.). 5 ed. Elsevier Ltd, Vol. 2018. p. 26733-26738 6 p. (Materials Today: Proceedings).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  80. Published

    On the modelling of mixed lubrication of conformal contacts

    Bergmann, P., Grun, F., Gódor, I., Stadler, G. & Maier-Kiener, V., 2018, In: Tribology International. p. 220-236

    Research output: Contribution to journal › Article › Research › peer-review

  81. Published

    Short glass fibre reinforced polyamide under low cycle fatigue

    Primetzhofer, A., Stadler, G., Pinter, G. G. & Grun, F., 2018, Proceedings ECCM 18.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  82. Published

    Study of notch effect and fibre orientation on fatigue strength of short glass fibre reinforced polyamide

    Primetzhofer, A., Stadler, G., Schneider, C., Pinter, G. G. & Grun, F., 2018, Proceedings ECCM 18.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  83. 2017
  84. Published

    Effect of elevated temperature on the fatigue strength of casted AlSi8Cu3 aluminium alloys

    Garb, C., Leitner, M. & Grun, F., 12 Dec 2017, In: Procedia structural integrity / ESIS. 7, p. 497-504

    Research output: Contribution to journal › Article › Research › peer-review

  85. E-pub ahead of print

    Effects of Inclusions on the Very High Cycle Fatigue Properties of a High Strength Martensitic Steel within the Transition Area

    Milosevic, I., Garb, C., Winter, G., Grun, F. & Kober, M., 12 Dec 2017, (E-pub ahead of print) In: Procedia Structural Integrity. 7.2017, p. 327-334 8 p.

    Research output: Contribution to journal › Article › Research › peer-review

  86. Published

    In-situ crack propagation measurement of high-strength steels including overload effects

    Simunek, D., Leitner, M. & Grun, F., 29 Nov 2017.

    Research output: Contribution to conference › Poster › Research

  87. Published

    CN107366570 (A) - TURBOCHARGER ASSEMBLY

    Hettinger, R. (Inventor), DAGUIN , F. (Inventor), BOILEAU , R. (Inventor), CAPELLI, M. (Inventor), Simon, P. (Inventor), GAINETON, N. (Inventor), BLUMENSCHEIN, E. (Inventor), REICHHART, M. (Inventor), Risch, G. (Inventor), Steinwender, L. (Inventor), Grun, F. (Inventor) & Gódor, I. (Inventor), 21 Nov 2017, IPC No. F01D25/16; F01D25/18; F01D25/24; F02B39/00; F02B39/14, Patent No. CN107366570 (A), Priority date 13 May 2016, Priority No. US201615154673

    Research output: Patent

  88. Published

    US10316742 (B2) - Turbocharger assembly

    Hettinger, R. (Inventor), DAGUIN , F. (Inventor), BOILEAU , R. (Inventor), CAPELLI, M. (Inventor), Simon, P. (Inventor), GAINETON, N. (Inventor), BLUMENSCHEIN, E. (Inventor), REICHHART, M. (Inventor), Risch, G. (Inventor), Steinwender, L. (Inventor), Grun, F. (Inventor) & Gódor, I. (Inventor), 16 Nov 2017, IPC No. F01D25/12; F01D25/16; F01D25/18; F01D25/24; F02B33/40; F02B39/14 , Patent No. US10316742 (B2), Priority date 13 May 2016, Priority No. US201615154673

    Research output: Patent

  89. Published

    US2017328273 (A1) - TURBOCHARGER ASSEMBLY

    Hettinger, R. (Inventor), DAGUIN , F. (Inventor), BOILEAU , R. (Inventor), CAPELLI, M. (Inventor), Simon, P. (Inventor), GAINETON, N. (Inventor), BLUMENSCHEIN, E. (Inventor), REICHHART, M. (Inventor), Risch, G. (Inventor), Steinwender, L. (Inventor), Grun, F. (Inventor) & Gódor, I. (Inventor), 16 Nov 2017, IPC No. F01D25/12; F01D25/16; F01D25/18; F01D25/24; F02B33/40; F02B39/14 , Patent No. US2017328273 (A1), Priority date 16 May 2016, Priority No. US201615154673

    Research output: Patent

  90. Published

    EP3244027 (A1) - TURBOCHARGER ASSEMBLY

    Hettinger, R. (Inventor), DAGUIN , F. (Inventor), BOILEAU , R. (Inventor), CAPELLI, M. (Inventor), Simon, P. (Inventor), GAINETON, N. (Inventor), BLUMENSCHEIN, E. (Inventor), REICHHART, M. (Inventor), Risch, G. (Inventor), Steinwender, L. (Inventor), Grun, F. (Inventor) & Gódor, I. (Inventor), 15 Nov 2017, IPC No. F01D25/16; F01D25/18; F02C6/12, Patent No. EP3244027 (A1), Priority date 13 May 2016, Priority No. EP20170166958

    Research output: Patent

  91. Published

    A new high frequency testing method for steels under tension/compression loading in the VHCF regime

    Milosevic, I., Renhart, P., Winter, G., Grün, F. & Kober, M., 1 Nov 2017, In: International Journal of Fatigue. 104, p. 150-157 8 p.

    Research output: Contribution to journal › Article › Research › peer-review

  92. Published

    LEBENSDAUERBERECHNUNG - KONZEPTE FÜR PROZESSABHÄNGIGE MATERIALIEN AM BEISPIEL FASERVERSTÄRKTER KUNSTSTOFFE

    Primetzhofer, A., Stadler, G., Pinter, G. G. & Grün, F., 11 Oct 2017. 16 p.

    Research output: Contribution to conference › Poster › Research

  93. Published

    LEBENSDAUERBERECHNUNG - KONZEPTE FÜR PROZESSABHÄNGIGE MATERIALIEN AM BEISPIEL FASERVERSTÄRKTER KUNSTSTOFFE

    Primetzhofer, A., Stadler, G., Pinter, G. G. & Grün, F., 11 Oct 2017, (R)Evolution des Antriebs - Auswirkungen auf die Betriebsfestigkeit der Bauteile in der Wirkungskette. 44 ed. Berlin, Vol. DVM_Arbeitskreis Betriebsfestigkeit. 16 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  94. Published

    Influence of tribofilm formation in DLC-steel line contacts on friction

    Moder, J., Grun, F., Summer, F., Gasperlmair, T. & Andritschky, M., 5 Sept 2017, p. 63. 1 p.

    Research output: Contribution to conference › Abstract › peer-review

  95. Published

    Multiaxial fatigue strength assessment of electroslag remelted 50CrMo4 steel crankshafts

    Leitner, M., Tuncali, Z., Steiner, R. & Grün, F., 1 Jul 2017, In: International Journal of Fatigue. 100, p. 159-175 17 p.

    Research output: Contribution to journal › Article › Research › peer-review

  96. Published

    Tribology of journal bearings: Start stop operation as life-time factor

    Summer, F., Grün, F., Offenbecher, M., Taylor, S. & Lainé, E., Jul 2017, In: Tribologie und Schmierungstechnik. 4/17, p. 44-54

    Research output: Contribution to journal › Article › Research › peer-review

  97. Published

    A Novel Two-Disc Machine for High Precision Friction Assessment

    Moder, J., Grün, F., Stoschka, M. & Godor, I., 28 Jun 2017, In: Advances in Tribology. 2017, 1, 16 p.

    Research output: Contribution to journal › Article › Research › peer-review

  98. Published

    NOVEL LEAD FREE BEARING OVERLAY SOLUTIONS WITH LOW FRICTION PERFORMANCE

    Summer, F., Grün, F., Offenbecher, M., Taylor, S. & Lainé, E., 7 Jun 2017, Proceedings of the 6th European COnference on TRIBology. Ljubljana, Slovenia

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  99. Published

    A first proposal of a new high frequency testing method for high strength steels under tension / compression loading in the VHCF regime

    Milosevic, I., Winter, G., Grun, F. & Kober, M., 2017, VHCF7 - Seventh International Conference on Very High Cycle Fatigue.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  100. Published

    Damage Equivalent Test Methodologies as Design Elements for Journal Bearing Systems

    Summer, F., Bergmann, P. & Grun, F., 2017, In: Lubricants. 47, 5, 16 p.

    Research output: Contribution to journal › Article › Research › peer-review

  101. Published

    Expansion of the metrological visualization capability by the implementation of acoustic emission analysis

    Bergmann, P., Grün, F., Summer, F., Gódor, I. & Stadler, G., 2017, In: Advances in Tribology. 2017, 3718924.

    Research output: Contribution to journal › Article › Research › peer-review

  102. Published

    Fretting wear behavior of thermoplastic polyurethane (TPU)

    Wang, C., Hausberger, A., Pinter, G. G., Grun, F. & Schwarz, T., 2017, Proceedings WTC 2017.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  103. Published

    Influence of the stress gradient on the fatigue life calculation of a martensitic high strength steel

    Milosevic, I., Winter, G., Grün, F. & Kober, M., 2017, In: Frattura ed Integrità Strutturale . 11, 42, p. 1-8 8 p.

    Research output: Contribution to journal › Article › Research › peer-review

  104. Published

    In-situ Testing of Wear and Fatigue on Gear Segments

    Grun, F., Koblmiller, T., Gódor, I. & Schadler, W., 2017, Proceedings of the 6th World Tribology Congress. 4 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  105. Published

    Novel Gear Test Methodology to evaluate efficiency and durability

    Grun, F., Maier, B., Gódor, I. & Steinwender, F., 2017, Proceedings of the 6th European COnference on TRIBology. 2 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

Previous 1 2 3 4 Next
View graph of relations

Contact

Phone: 1450

Latest Research Output

View more (341)