Clemens Holzer

251 - 300 out of 315Page size: 50

Publications / Theses

  1. 2011
  2. Published

    Influence of processing conditions and induced shear work on the thermal, rheological and mechanical behavior of polymer nanocomposites

    Mattausch, H., Laske, S., Duretek, I., Witschnigg, A. & Holzer, C., 2011,

    Program & Abstracts of 27th Annual Meeting of the Polymer Processing Society

    .     p. 157-158

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  3. Published

    Influence of shear energy on the properties of polyolefin nanocomposite pipes: Plastics Research Online, Reihentitel: 10.1002/spepro.003977

    Witschnigg, A., Laske, S., Kracalik, M. & Holzer, C., 2011

    Research output: Non-textual form › Web publication/site › Transfer

  4. Published

    Influence of the degree of exfoliation on the thermal conductivity of polypropylene nanocomposites

    Laske, S., Duretek, I., Witschnigg, A. & Holzer, C., 2011,

    Program & Abstracts of 27th Annual Meeting of the Polymer Processing Society

    .     p. 155-155

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  5. Published

    Influence of the heat transfer coefficient on the injection molding simulation of microstructures

    Müller, F., Lucyshyn, T., Kukla, C. & Holzer, C., 2011, Conference Proceedings - ICIT & MPT 2011 . p. 141-148

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  6. Published

    Investigations of adhesion on two-shot moulded parts

    Kisslinger, T., Lucyshyn, T., Doler, M., Langecker, G. & Holzer, C., 2011.

    Research output: Contribution to conference › Poster › Research › peer-review

  7. Published

    Kunststoffverarbeitung-Vom Rohstoff zum fertigen Bauteil

    Piontek, M., Holzer, C. & Laske, S., 2011.

    Research output: Contribution to conference › Poster › Research › peer-review

  8. Published

    Nanostructured polymer surfaces to optimize cell behaviour

    Holzer, C., Laske, S., Katschnig, M. & Balika, W., 2011.

    Research output: Contribution to conference › Poster › Research › peer-review

  9. Published

    Nanostructured polymer surfaces to optimize cell behaviour

    Holzer, C., Katschnig, M., Kracalik, M., Andraschek, N., Laske, S., Schäfer, U. & Balika, W., 2011, Abstract Book. p. 72-72

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  10. Published

    Near infrared spectroscopy - a smart way of characterization and quality control of PP-NC

    Witschnigg, A., Laske, S., Holzer, C., Patel, R., Khan, A., Benkreira, H. & Coates, P., 2011, Enhanced Polymer Processing. p. 266-284

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  11. Published

    Numerical modelling of flow in conical co-rotating twin screw extruder

    Selvasankar, R. K., Schuschnigg, S., Fertschej, A. & Holzer, C., 2011.

    Research output: Contribution to conference › Poster › Research › peer-review

  12. Published

    Polymeres Papier als Beispiel für Nachhaltigkeit durch Innovation

    Laske, S., Katschnig, M. & Holzer, C., 2011, Umweltverträgliche Produktion und nachhaltiger Erfolg - Chancen, Benchmarks & Entwicklungslinien. p. 92-100

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research

  13. Published

    Polymerpapier auf Basis nachwachsender polymerer Rohstoffe

    Laske, S. & Holzer, C., 2011, Kurzfassungen der Vorträge "Zukunft - Forum Papier - Österreichische Papierfachtagung 2011". p. 6-6

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  14. Published

    Rheological, thermal and mechanical characterizations of polyolefin-algae compounds

    Piontek, M., Laske, S., Rieß, G. & Holzer, C., 2011,

    Program & Abstracts of 27th Annual Meeting of the Polymer Processing Society

    .     p. 127-128

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  15. Published

    Surface Modification of Unfilled and Highly Filled Polylactic Acid Films Using Corona Discharge Treatment

    Laske, S., Rüf, E., Piontek, M. & Holzer, C., 2011, In: Journal of characterization and development of novel materials. 4, 2, p. 1-7

    Research output: Contribution to journal › Article › Research › peer-review

  16. Published

    The Future of Polymer Processing

    Holzer, C., 2011, Cetrdeseta obljetnica usmjerenja prerada polimera. p. 15-23

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  17. Published

    The Future of Polymer Processing

    Holzer, C., 2011, In: Polimeri. p. 124-129

    Research output: Contribution to journal › Article › Research › peer-review

  18. Published

    Verbundhaftungsuntersuchungen an Zweikomponenten-Spritzgussteilen

    Kisslinger, T., Lucyshyn, T., Doler, M., Langecker, G. & Holzer, C., 2011, 20. Leobener Kunststoff-Kolloquium - Polymerer Leichtbau. p. 153-162

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  19. Published

    Verweilzeitmessung in Extrudern mittels dielektrischer Substanzen

    Schuschnigg, S., Fertschej, A., Silberhorn, M. & Holzer, C., 2011, 2. Tagung Innovation Messtechnik. p. 3-3

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  20. Published

    Zeolith - Einsatz in Kunststoffen

    Piontek, M., Laske, S., Rieß, G., Flachberger, H. & Holzer, C., 2011, Das Naturmineral des 21. Jahrhunderts? Klinoptilolith-Zeolith im Fokus regionaler Kompetenzen und vielfältiger Einsatzbereiche. p. 25-26

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  21. 2010
  22. Published

    Replication of micro-and nanostructures on polymer surfaces

    Holzer, C., Gobrecht, J., Schift, H. & Solak, H., 1 Oct 2010, In: Macromolecular Symposia. 296, 1, p. 316-323 8 p.

    Research output: Contribution to journal › Article › Research › peer-review

  23. Published

    A Conical Co-Rotating Machine Puts on the Pressure

    Klammer, G., Holzer, C., Schuschnigg, S. & Selvasankar, R. K., 2010, In: Kunststoffe <München> / Kunststoffe international. p. 59-62

    Research output: Contribution to journal › Article › Research › peer-review

  24. Published

    Ceramic and Polymer Matrix Composites: Properties, Performance and Applications

    Kracalik, M., Laske, S. & Holzer, C., 2010, Polymer Matrix Composites: Properties, Performance and Applications. p. 169-194

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research

  25. Published

    Comparative ecological assessment of a sheet of paper based on the biopolymer PLA and on normal pulp

    Katschnig, M., Laske, S. & Holzer, C., 2010.

    Research output: Contribution to conference › Poster › Research › peer-review

  26. Published

    Comparative ecological assessment of a sheet of paper based on the biopolymer PLA and on normal pulp

    Katschnig, M., Laske, S. & Holzer, C., 2010, Book of Abstracts of ASPM 2010 Austrian-Slovenian Polymer Meeting. p. 122-122

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  27. Published

    Determination of the elongational viscosity of polymer nanocomposites using different measurement methods

    Mattausch, H., Laske, S. & Holzer, C., 2010.

    Research output: Contribution to conference › Poster › Research › peer-review

  28. Published

    Determination of the elongational viscosity of polymer nanocomposites using different measurement methods

    Mattausch, H., Laske, S. & Holzer, C., 2010, Book of Abstracts of ASPM 2010 Austrian-Slovenian Polymer Meeting. p. 149-149

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  29. Published

    Effect of the mixture composition on shear and extensional rheology of polyethylenterephthalate and acrylonitrilbutadienstyren nanocomposites

    Kracalik, M., Laske, S. & Holzer, C., 2010, Book of Abstracts of ASPM 2010 Austrian-Slovenian Polymer Meeting. p. 21-22

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  30. Published

    Elongational and shear flow in polymer-clay nanocomposites measured by on-line extensional and off-line shear rheometry

    Kracalik, M., Laske, S., Witschnigg, A. & Holzer, C., 2010, Book of Abstracts of Annual European Rheology Conference. p. 26-26

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  31. Published

    Extrusion am IKV-Leoben, Ausgewählte Projekte aus der aktuellen Forschung

    Holzer, C., Laske, S., Fertschej, A. & Schuschnigg, S., 2010, Extrusionstechnik 2010 - Hochleistungsextrusion und Betriebskostenoptimierung. p. 81-100

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research

  32. Published

    Influence of molecular structure on the extensional behaviour of polyethylene melts

    Duretek, I., Florian, M. & Holzer, C., 2010, Book of Abstracts of ASPM 2010 Austrian-Slovenian Polymer Meeting. p. 130-130

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  33. Published

    Influence of molecular structure on the extensional behaviour of polyethylene melts

    Duretek, I., Florian, M. & Holzer, C., 2010.

    Research output: Contribution to conference › Poster › Research › peer-review

  34. Published

    Influence of shear energy and residence time on physical and mechanical properties of polyethylene nanocomposites

    Witschnigg, A., Laske, S. & Holzer, C., 2010.

    Research output: Contribution to conference › Poster › Research › peer-review

  35. Published

    Influence of shear energy and residence time on physical and mechanical properties of polyethylene nanocomposites

    Witschnigg, A., Laske, S. & Holzer, C., 2010, Book of Abstracts of ASPM 2010 Austrian-Slovenian Polymer Meeting. p. 150-150

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  36. Published

    In-line characterization of polypropylene nanocomposites using FIT-NIR

    Witschnigg, A., Laske, S., Kracalik, M., Feuchter, M., Pinter, G., Maier, G., Märzinger, W., Haberkorn, M., Langecker, G. & Holzer, C., 2010, In: Journal of Applied Polymer Science. 117, p. 3047-3053

    Research output: Contribution to journal › Article › Research › peer-review

  37. Published

    In-line Qualitätskontrolle mittels Nah-Infrarot Spektroskopie

    Witschnigg, A., Laske, S. & Holzer, C., 2010, Proceedings - Grenzen von Kunststoffen neu definiert - Errungenschaften im Bereich Metallersatz und Leichtbau. p. 1-68

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  38. Published

    Investigations of Adhesion on Two-shot Moulded Parts

    Kisslinger, T., Lucyshyn, T., Doler, M., Langecker, G. & Holzer, C., 2010.

    Research output: Contribution to conference › Poster › Research › peer-review

  39. Published

    Investigations of Adhesion on Two-shot Moulded Parts

    Kisslinger, T., Lucyshyn, T., Doler, M., Langecker, G. & Holzer, C., 2010, Book of Abstracts of ASPM 2010 Austrian-Slovenian Polymer Meeting. p. 111-111

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  40. Published

    INVESTIGATIONS OF ADHESION ON TWO-SHOT MOULDED PARTS

    Kisslinger, T., Lucyshyn, T., Doler, M., Langecker, G. & Holzer, C., 2010.

    Research output: Contribution to conference › Poster › Research › peer-review

  41. Published

    Konischer Gleichläufer macht Druck

    Klammer, G., Holzer, C., Schuschnigg, S. & Selvasankar, R. K., 2010, In: Kunststoffe. p. 80-83

    Research output: Contribution to journal › Article › Research › peer-review

  42. Published

    Kunststoffverarbeitung - über Spritzguß und Extrusion hinaus

    Holzer, C., 2010, In: KC-aktuell (Informationen aus dem Kunstoff-Cluster). p. 1-3

    Research output: Contribution to journal › Article › Research › peer-review

  43. Published

    Nanotechnology as a New Approach for Material Recycling of PET Bottles

    Kracalik, M., Laske, S. & Holzer, C., 2010.

    Research output: Contribution to conference › Poster › Research › peer-review

  44. Published

    Nanotechnology as a New Approach for Material Recycling of PET Bottles

    Kracalik, M., Laske, S. & Holzer, C., 2010, Tagungsband zur 10. DepoTech-Konferenz. p. 617-620

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  45. Published

    Real-time characterization of polypropylene nanocomposites in a corotating twin screw extruder

    Laske, S., Witschnigg, A., Kracalik, M., Feuchter, M., Pinter, G., Maier, G. A., Langecker, G. & Holzer, C., 2010, Proceedings ANTEC 2010. p. 0-0

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  46. Published

    Simulation of the Heating of Sheets using IR-Radiation

    Fertschej, A., Langecker, G. & Holzer, C., 2010, Book of Abstracts of ASPM 2010 Austrian-Slovenian Polymer Meeting. p. 114-114

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  47. Published

    Simulation of the Heating of Sheets using IR-Radiation

    Fertschej, A., Langecker, G. & Holzer, C., 2010.

    Research output: Contribution to conference › Poster › Research › peer-review

  48. Published

    Thermal and mechanical properties of biodegradable polyolefin-chlorella compounds

    Piontek, M., Laske, S., Rieß, G., Feuchter, M. & Holzer, C., 2010, Book of Abstracts of ASPM 2010 Austrian-Slovenian Polymer Meeting. p. 75-75

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  49. Published

    Verarbeitung von Nanofüllstoffen mittels "Advanced Compounding"

    Mattausch, H., Laske, S. & Holzer, C., 2010, Proceedings - Grenzen von Kunststoffen neu definiert - Errungenschaften im Bereich Metallersatz und Leichtbau. p. 1-30

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  50. Published

    Virtual determination of a process window for injection moulding

    Lucyshyn, T., Kukla, C., Kipperer, M. & Holzer, C., 2010, Book of Abstracts of ASPM 2010 Austrian-Slovenian Polymer Meeting. p. 4-4

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  51. 2009
  52. Published

    Advanced characterization of polymer-clay nanocomposites: application of in-line near infrared spectroscopy and on-line extensional rheology

    Kracalik, M., Laske, S., Feuchter, M., Maier, G., Pinter, G., Langecker, G. & Holzer, C., 2009, EuroNanoForum 2009 - Nanotechnology for Sustainable Economy - Proceedings. p. 222-222

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  53. Published

    Advanced characterization of polymer-clay nanocomposites: application of in-line near infrared spectroscopy and on-line extensional rheology

    Kracalik, M., Laske, S., Feuchter, M., Maier, G., Pinter, G., Langecker, G. & Holzer, C., 2009.

    Research output: Contribution to conference › Poster › Research › peer-review

Previous 12 3 4 5 6 7 Next
View graph of relations

Contact

Phone: 3500

Latest Research Output

View more (315)