Christina Hofer

(Former)

1 - 39 out of 39Page size: 100

Publications / Theses

  1. 2021
  2. Published

    Atom Probe Tomography of the Oxide Layer of an Austenitic Stainless CrMnN-Steel

    Monschein, S., Schnitzer, R., Fluch, R., Turk, C. & Hofer, C., 14 May 2021, In: Practical metallography = Praktische Metallographie. 58.2021, 5, p. 264-281 18 p.

    Research output: Contribution to journal › Article › Research

  3. Published

    Influence of the cooling time on the microstructural evolution and mechanical performance of a double pulse resistance spot welded Medium-Mn steel

    Stadler, M., Schnitzer, R., Gruber, M., Steineder, K. & Hofer, C., 5 Feb 2021, In: Metals : open access journal . 11.2021, 2, p. 1-11 11 p., 270.

    Research output: Contribution to journal › Article › Research › peer-review

  4. Published

    Bending behavior of zinc-coated hot stamping steels

    Hofer, C., Stadler, M., Kurz, T., Maier-Kiener, V., Mayerhofer, A., Hebesberger, T. & Schnitzer, R., 2021, In: Steel research international. 2021, p. 1-9

    Research output: Contribution to journal › Article › Research › peer-review

  5. Published

    Improving the mechanical performance of a resistance spot welded 1200 MPa TBF steel

    Stadler, M., Schnitzer, R., Gruber, M. & Hofer, C., 2021, In: International journal of materials research : IJMR ; Zeitschrift für Metallkunde. 2021, 112, p. 262-270

    Research output: Contribution to journal › Article › Research › peer-review

  6. Published

    Influence of partitioning parameters on the mechanical stability of austenite in a Q&P steel: A comparative in-situ study

    Ebner, S., Schnitzer, R., Maawad, E., Suppan, C. & Hofer, C., 2021, In: Materialia. 2021, 15, p. 1-10

    Research output: Contribution to journal › Article › Research › peer-review

  7. Published

    Microstructure and local mechanical properties of the heat-affected zone of a resistance spot welded medium-Mn steel

    Stadler, M., Schnitzer, R., Gruber, M., Steineder, K. & Hofer, C., 2021, In: Materials. 2021, 14, p. 1-13

    Research output: Contribution to journal › Article › Research › peer-review

  8. Published

    Microstructure and mechanical properties of partially ferritic Q&P steels

    Kickinger, C., Suppan, C., Hebesberger, T., Schnitzer, R. & Hofer, C., 2021, In: Materials science and engineering: A, Structural materials: properties, microstructure and processing. 2021, 815, p. 1-11

    Research output: Contribution to journal › Article › Research › peer-review

  9. Published

    Nanocluster evolution and mechanical properties of ion irradiated T91 ferritic-martensitic steel

    Davis, T. P., Auger, M. A., Hofer, C., Bagot, P., Moody, M. P. & Armstrong, D. E. J., 2021, In: Journal of nuclear materials. 2021, 548, p. 1-10

    Research output: Contribution to journal › Article › Research › peer-review

  10. 2020
  11. Published

    The role of Ti and TiC nanoprecipitates in radiation resistant austenitic steel: A nanoscale study

    Cautaerts, N., Deville, R., Stergar, E., Pakarinen, J., Verwerft, M., Yang, Y., Hofer, C., Schnitzer, R., Lamm, S., Felfer, P. & Schryvers, D., 15 Sept 2020, In: Acta materialia. 2020, 197, p. 184-197 14 p.

    Research output: Contribution to journal › Article › Research › peer-review

  12. E-pub ahead of print

    Characterization of carbides in Q&P steels using a combination of high-resolution methods

    Ebner, S., Schnitzer, R., Suppan, C., Stark, A., Liu, H. & Hofer, C., 2 Mar 2020, (E-pub ahead of print) In: Materials characterization. 163.2020, May, 11 p., 110242.

    Research output: Contribution to journal › Article › Research › peer-review

  13. 2019
  14. Published

    Formation of "carbide-free zones" resulting from the interplay of C redistribution and carbide precipitation during bainitic transformation

    Klein, T., Hofer, C., Lukas, M., Wojcik, T., Schnitzer, R., Galler, M. & Ressel, G., 23 Jun 2019, In: Materialia. 7.2019, September, 100380.

    Research output: Contribution to journal › Article › Research › peer-review

  15. Published

    Austenite decomposition and carbon partitioning during quenching and partitioning heat treatments studied via in-situ X-ray diffraction

    Ebner, S., Suppan, C., Stark, A., Schnitzer, R. & Hofer, C., 2019, In: Materials and Design. 178.2019, September, 107862.

    Research output: Contribution to journal › Article › Research › peer-review

  16. Published

    Microstructural characterization of a double pulse resistance spot welded 1200 Mpa TBF steel

    Stadler, M., Gruber, M., Schnitzer, R. & Hofer, C., 2019, In: Welding in the world. 2020, p. 335-343

    Research output: Contribution to journal › Article › Research › peer-review

  17. Published

    Thermal stability of nanolamellar fcc-Ti1-xAlxN grown by chemical vapor deposition

    Tkadletz, M., Hofer, C., Wüstefeld, C., Schalk, N., Motylenko, M., Rafaja, D., Holzschuh, H., Bürgin, W., Sartory, B., Mitterer, C. & Czettl, C., 2019, In: Acta Materialia. 174.2019, August, p. 195-205 11 p.

    Research output: Contribution to journal › Article › Research › peer-review

  18. 2018
  19. Published

    High-resolution characterization of the martensite-austenite constituent in a carbide-free bainitic steel

    Hofer, C., Bliznuk, V., Verdiere, A., Petrov, R., Winkelhofer, F., Clemens, H. & Primig, S., 10 Jul 2018, In: Materials characterization. 144.2018, October, p. 182-190 9 p.

    Research output: Contribution to journal › Article › Research › peer-review

  20. Published

    Correlation of heat treatment parameters, microstructure and mechanical properties of 3rd generation AHSS

    Ebner, S., Suppan, C., Schnitzer, R. & Hofer, C., 2018.

    Research output: Contribution to conference › Poster › Research

  21. Published

    Microstructure and mechanical properties of a low C steel subjected to bainitic of quenching and partitioning heat treatments

    Ebner, S., Suppan, H., Schnitzer, R. & Hofer, C., 2018, In: Materials science and engineering: A, Structural materials: properties, microstructure and processing. p. 1-9

    Research output: Contribution to journal › Article › Research › peer-review

  22. Published

    Multi-Scale Microstructural Characterization - The Role of Classic and High-Resolution Metallography in the Developement of Modern High-Performance Materials

    Schnitzer, R., Hofer, C., Mayer, S., Panzenböck, M., Holec, D. & Clemens, H., 2018, In: Practical metallography = Praktische Metallographie. 2018, 9, p. 584-602

    Research output: Contribution to journal › Article › Research › peer-review

  23. Published

    Skalenübergreifende Gefügechatakterisierung - Die Rolle der klassischen und hochauflösenden Metallographie bei der Entwicklung moderner Hochleistungswerkstoffe

    Schnitzer, R., Hofer, C., Mayer, S., Panzenböck, M., Holec, D. & Clemens, H., 2018, Praktische Metallographie Sonderband: Fortschritte in der Metallographie. 1 ed. Vol. 52. p. 23-34

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  24. 2017
  25. Published

    Atom probe study of prior austenite grain bounda-ries of zinc-coated press hardened steel

    Hofer, C., Kurz, T., Clemens, H. & Schnitzer, R., 2017, 2017 CHS2 Conference Proceedings. p. 383-390

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  26. Published

    Cross-sectional characterization techniques as the basis for knowledge-based design of graded CVD TiN-TiB2 coatings

    Tkadletz, M., Schalk, N., Mitterer, C., Hofer, C., Keckes, J., Deluca, M., Pohler, M. & Czettl, C., 2017.

    Research output: Contribution to conference › Poster › Research

  27. Published

    Influence of heat treatment on microstructure stability and mechanical properties of a carbide-free bainitic steel

    Hofer, C., Primig, S., Clemens, H., Winkelhofer, F. & Schnitzer, R., 2017, In: Advanced Engineering Materials. 19, 4, 5 p., 1600658.

    Research output: Contribution to journal › Article › Research › peer-review

  28. Published

    Precipitation in simultaneously nitrided and aged Mo-containing maraging steel

    Verdiere, A., Hofer, C., De Waele, S., Bliznuk, V., Primig, S., Cottenier, S., Tran, M. D., Pennings, B., Kestens, L. A. I. & Petrov, R., 2017, In: Materials characterization. 131, p. 21-30

    Research output: Contribution to journal › Article › Research › peer-review

  29. 2016
  30. Published

    Applications of site-specific atom probe specimen preparation by focused ion beam and transmission Kikuchi diffraction

    Turk, C., Leitner, K., Lang, D., Haslberger, P., Hofer, C., Clemens, H. & Primig, S., 2016.

    Research output: Contribution to conference › Presentation › Research

  31. Published

    Charakterisierung eines karbidfreien bainitischen Stahls der dritten Generation „Advanced High Strength Steels“

    Hofer, C., 2016

    Research output: Thesis › Doctoral Thesis

  32. Published

    Correlative microscopy of a carbide-free bainitic steel

    Hofer, C., Bliznuk, V., Verdiere, A., Petrov, R., Winkelhofer, F., Clemens, H. & Primig, S., 2016, In: Micron. 81, p. 1-7

    Research output: Contribution to journal › Article › Research › peer-review

  33. Published

    Morphology change of retained austenite during austempering of carbide-freebainiticsteel

    Hofer, C., Winkelhofer, F., Clemens, H. & Primig, S., 2016, In: Materials science and engineering: A, Structural materials: properties, microstructure and processing. 664, p. 236-246 11 p.

    Research output: Contribution to journal › Article › Research › peer-review

  34. 2015
  35. Published

    An intermetallic forming steel under radiation for nuclear applications

    Hofer, C., Stergar, E., Maloy, S. A., Wang, Y. & Hosemann, P., 2015, In: Journal of nuclear materials. 458, p. 361-368

    Research output: Contribution to journal › Article › Research › peer-review

  36. Published

    Correlative microscopy and atom probe tomography of the M-A constituent in a carbide-free bainite

    Hofer, C., Bliznuk, V., Verdiere, A., Petrov, R., Winkelhofer, F., Clemens, H. & Primig, S., 2015.

    Research output: Contribution to conference › Poster › Research

  37. Published

    Preparation of carbide-free bainitic steels for EBSD investigations

    Hofer, C., Clemens, H. & Primig, S., 2015, In: Practical metallography = Praktische Metallographie. 52, 7, p. 384-395

    Research output: Contribution to journal › Article › Research › peer-review

  38. Published

    Structural characterization of "carbide-free" bainite in a Fe-0.2C-1.5Si-2.5Mn steel

    Hofer, C., Harald, L., Winkelhofer, F., Clemens, H. & Primig, S., 2015, In: Materials characterization. 102, p. 85-91

    Research output: Contribution to journal › Article › Research › peer-review

  39. 2014
  40. Published

    Advanced Steels

    Clemens, H., Primig, S., Mendez Martin, F., Babinsky, K., Hofer, C., Lang, D., Sackl, S. C., Turk, C. & Weißensteiner, I., 2014.

    Research output: Contribution to conference › Poster › Research › peer-review

  41. Published

    Atom probe tomography of carbides occuring in "carbide-free" bainitic steels

    Hofer, C., Winkelhofer, F., Krammerbauer, J., Clemens, H. & Primig, S., 2014.

    Research output: Contribution to conference › Presentation › Research › peer-review

  42. Published

    Combining Fib, t-EBSD and atom probe tomography for full chemical and crystallographic materials characterization

    Babinsky, K., De Kloe, R., Haslberger, P., Hofer, C., Lang, D., Turk, C., Clemens, H. & Primig, S., 2014.

    Research output: Contribution to conference › Presentation › Research › peer-review

  43. Published

    High Performance Materials

    Clemens, H., Primig, S., Mendez Martin, F., Babinsky, K., Hofer, C., Lang, D., Sackl, S. C., Turk, C. & Weißensteiner, I., 2014.

    Research output: Contribution to conference › Poster › Research › peer-review

  44. Published

    Präparation von karbidfreien bainitischen Stählen für EBSD-Untersuchungen

    Hofer, C., Clemens, H. & Primig, S., 2014, Sonderbände der Praktischen Metallographie 46. p. 71-76

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  45. Published

    Präparation von karbidfreien bainitischen Stählen für EBSD-Untersuchungen

    Hofer, C., Clemens, H. & Primig, S., 2014, p. 71-76.

    Research output: Contribution to conference › Presentation › Research › peer-review

  46. 2013
  47. Published

    Phase characterization of multi-phase advanced high strength steels

    Hofer, C., Primig, S., Pichler, A., Krammerbauer, J. & Leitner, H., 2013.

    Research output: Contribution to conference › Poster › Research › peer-review

  48. 2012
  49. Published

    Influence of proton irradiation on the precipitation kinetics and mechanical properties of intermetallic precipitation-hardened steel

    Hofer, C., 2012, 62 p.

    Research output: Thesis › Diploma Thesis › peer-review

View graph of relations

Latest Research Output

View more (39)