Christian Bernhard

51 - 100 out of 229Page size: 50

Publications / Theses

  1. 2017
  2. Published

    Further development and validation of IDS by means of selected experiments

    Presoly, P., Bernhard, C., Fuchs, N., Miettinen, J., Louhenkilpi, S. & Laine, J., 27 Jun 2017, Proceedings of 9th ECCC European Continuous Casting Conference - ECCC2017. Vienna: ASMET

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  3. Published

    The potential for grain refinement of a super austenitic stainless steel with a cerium grain refiner

    Baumgartner, K., Bernhard, C., Presoly, P., Hafok, M. & Leitner, H., 25 May 2017, ESSC and DUPLEX 2017 - 9th European Stainless Steel Conference - Science and Market and 5th European Duplex Stainless Steel Conference and Exhibition. Associazione Italiana di Metallurgia, Vol. 2017-May.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  4. Published

    A New Experimental Setup for the Simulation of Surface Crack Formation in the Continuous Casting Process

    Krobath, R. & Bernhard, C., 8 May 2017, p. 1827 - 1837. 11 p.

    Research output: Contribution to conference › Paper › peer-review

  5. Published

    On the Capability of Nonmetallic Inclusions to Act as Nuclei for Acicular Ferrite in Different Steel Grades

    Loder, D., Michelic, S. K., Mayerhofer, A. & Bernhard, C., 4 May 2017, In: Metallurgical and Materials Transactions B, Process metallurgy and materials processing science. 48, 4, p. 1992-2006 15 p.

    Research output: Contribution to journal › Article › Research › peer-review

  6. Published

    A new method for the experimental simulation of surface crack formation in continuous casting

    Krobath, R., Bernhard, C., Ilie, S., Six, J. & Hahn, S., Apr 2017, In: Metallurgia Italiana. 1, 4, p. 5-13

    Research output: Contribution to journal › Article › Research › peer-review

  7. Published

    Influence of Silicon and Manganese on the Peritectic Range for Steel Alloys

    Presoly, P. & Bernhard, C., Apr 2017, In: Iron and Steel Technology. 2017, 4

    Research output: Contribution to journal › Article › Research › peer-review

  8. Published

    Modeling of manganese sulfide formation during the solidification of steel

    You, D., Michelic, S. K., Wieser, G. & Bernhard, C., Feb 2017, In: Journal of materials science. 52, 3, p. 1797-1812

    Research output: Contribution to journal › Article › Research › peer-review

  9. Published

    Influence of operation parameters on the cooling performance of water-air nozzles

    Preuler, L., Bernhard, C., Ilie, S. & Six, J., 1 Jan 2017, METAL 2017 - 26th International Conference on Metallurgy and Materials, Conference Proceedings. Vol. 2017-January. p. 45-51 7 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  10. Published

    Acicular Ferrite Formation and Its Influencing Factors - A Review

    Loder, D., Michelic, S. & Bernhard, C., Jan 2017, In: Journal of Materials Science Research. 6, 1, p. 24-43

    Research output: Contribution to journal › Article › Research › peer-review

  11. Published

    Experimental Study on the Behavior of TiN and Ti2O3 Inclusions in Contact with CaO-Al2O3-SiO2-MgO Slags

    Michelic, S. K. & Bernhard, C., 2017, In: Scanning.

    Research output: Contribution to journal › Article › Research › peer-review

  12. Published

    Kinetic model on manganese sulfide formation during solidification of steel

    You, D., Michelic, S. K., Presoly, P. & Bernhard, C., 2017, 6th Decennial International Conference on Solidification Processing (SP17).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  13. Published

    Modeling Inclusion Formation during Solidification of Steel: A Review

    You, D., Michelic, S. K., Presoly, P., Liu, J. & Bernhard, C., 2017, In: Metals : open access journal . 7, 11, p. 460 1 p.

    Research output: Contribution to journal › Article › Research › peer-review

  14. Published

    On the Relevance of Microsegregation Models for Process Control in Continuous Casting of Steel

    Bernhard, M. C., Presoly, P., Bernhard, C., Six, J. & Ilie, S., 2017, Conference Proceedings of the 26th Anniversary International Conference on Metallurgy and Materials - Metal 2017. Brno, Czech Republic

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  15. Published

    Study of Clogging Deposit Buildup in Al-killed and Ca-Treated High-Sulfur Steels With Focus on the Steel/Refractory Interface

    Dorrer, P., Michelic, S., Klösch, G., Reiter, J., Paul, A. & Bernhard, C., 2017, AISTech 2017 Proceedings. p. 1555 - 1565

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  16. Published

    Untersuchungen des Ausscheidungsverhaltens von H-Karbiden in einer kohlenstoffhaltigen TiAl Legierung mittels in- und ex-situ Experimenten

    Burtscher, M., Kirchheimer, K., Weißensteiner, I., Bernhard, C., Lederhaas, B., Klein, T., Mayer, S. & Clemens, H., 2017, Praktische Metallographie Sonderband 51. p. 55-60

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  17. 2016
  18. Published

    A new method for the experimental simulation of surface crack formation in continuous casting

    Krobath, R., Bernhard, C., Ilie, S., Six, J. & Hahn, S., 1 Dec 2016.

    Research output: Contribution to conference › Presentation › Research › peer-review

  19. Published

    HT-LSCM - A valuable tool for surface microstructure investigations

    Fuchs, N., Krobath, R., Bernhard, C., Ilie, S. & Xia, G., 1 Dec 2016.

    Research output: Contribution to conference › Presentation › Research › peer-review

  20. Published

    In-situ Beobachtung des Verhaltens nichtmetallischer Einschlüsse mittels Hochtemperatur- Laser-Scanning- Konfokalmikroskopie

    Michelic, S., Dieguez Salgado, U., Loder, D. & Bernhard, C., Sept 2016, In: Gießerei-Praxis (Giessereipraxis). 67, 9, p. 337 341 p.

    Research output: Contribution to journal › Article › Research › peer-review

  21. Published

    Experimental und numerical investigations on cooling efficiency of Air-Mist nozzles on steel during continuous casting

    Arth, G., Taferner, M., Bernhard, C. & Michelic, S., 10 Aug 2016, In: IOP Conference Series: Materials Science and Engineering. 143, 1, 012033.

    Research output: Contribution to journal › Article › Research › peer-review

  22. Published

    Formation of shrinkage porosity during solidification of steel: Numerical simulation and experimental validation

    Riedler, M., Michelic, S. & Bernhard, C., 10 Aug 2016, In: IOP Conference Series: Materials Science and Engineering. 143, 1, 012035.

    Research output: Contribution to journal › Article › Research › peer-review

  23. Published

    On the importance of thermodynamic investigations for the re-assessment of selected ternary Fe-base systems

    Presoly, P. & Bernhard, C., 10 Aug 2016, In: IOP Conference Series: Materials Science and Engineering. 143, 1, 012034.

    Research output: Contribution to journal › Conference article › peer-review

  24. Published

    Systematische Untersuchung der Azikularferritbildung in Stählen

    Loder, D., Michelic, S. & Bernhard, C., 11 Jul 2016, In: Berg- und hüttenmännische Monatshefte : BHM. 161, 7, p. 315-320

    Research output: Contribution to journal › Article › Research › peer-review

  25. Published

    Microsegregation Model with Local Equilibrium Partition Coefficients During Solidification of Steels

    You, D., Bernhard, C., Wieser, G. & Michelic, S., Jul 2016, In: Steel research international. 87, 7, p. 840-849

    Research output: Contribution to journal › Article › Research › peer-review

  26. Published

    Near net shape casting - current status and future perspectives

    Bernhard, C., 22 Jun 2016.

    Research output: Contribution to conference › Presentation › Transfer

  27. Published

    A transient 2D solidification model for defect prevention in the continuous casting process

    Bernhard, C., 25 May 2016.

    Research output: Contribution to conference › Presentation › Research

  28. Published

    Influence of Silicon and Manganese on the Peritectic Range for Steel Alloys

    Presoly, P. & Bernhard, C., 16 May 2016, Proceedings AISTech 2016. Pittsburgh, USA, p. 2497-2506 10 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  29. Published

    Research on continuous casting at University of Leoben - An overview

    Bernhard, C., 11 May 2016.

    Research output: Contribution to conference › Presentation › Transfer

  30. Published

    Charakterisierung der Erstarrungsmechanismen beim Vergießen großer Blöcke mit einem neuen Gießverfahren

    Riedler, M., Michelic, S. & Bernhard, C., 10 May 2016.

    Research output: Contribution to conference › Poster › Research

  31. Published

    Thermodynamic optimization of individual steel database by means of systematic DSC measurements according the CALPHAD approach

    Presoly, P., Six, J. & Bernhard, C., 14 Apr 2016, In: IOP Conference Series: Materials Science and Engineering. 119, 1, 012013.

    Research output: Contribution to journal › Conference article › peer-review

  32. Published

    Study on Oxide Inclusion Dissolution in Secondary Steelmaking Slags using High Temperature Confocal Scanning Laser Microscopy

    Michelic, S., Goriupp, J., Feichtinger, S., Kang, Y.-B., Bernhard, C. & Schenk, J., Jan 2016, In: Steel research international. 87, 1, p. 57-67

    Research output: Contribution to journal › Article › Research › peer-review

  33. Published

    Formation of shrinkage porosity during solidification of steel: Numerical simulation and experimental validation

    Riedler, M., Michelic, S. & Bernhard, C., 2016, In: IOP Conference Series: Materials Science and Engineering. 143.2016, 1, 8 p., 012035.

    Research output: Contribution to journal › Article › Research › peer-review

  34. Published

    In-situ observation of the behaviour of non-metallic inclusions at different interfaces in the system steel-slag-refractory

    Michelic, S., Salgado, U. D. & Bernhard, C., 2016, In: IOP Conference Series: Materials Science and Engineering. 143, 1, p. 012010 1 p.

    Research output: Contribution to journal › Article › Research › peer-review

  35. Published

    Investigation of metallurgical phenomena related to process and product development by means of High Temperature Confocal Scanning Laser Microscopy

    Diéguez-Salgado, U., Michelic, S. & Bernhard, C., 2016, In: IOP Conference Series: Materials Science and Engineering. 119, 1, 1 p.

    Research output: Contribution to journal › Article › Research › peer-review

  36. Published

    Investigation of the influence of the chemical composition of HSLA steel grades on the microstructure homogeneity during hot rolling in continuous rolling mills using a fast layer model

    Schmidtchen, M., Rimnac, A., Warczok, P., Kozeschnnik, E., Bernhard, C., Bragin, S., Kawalla, R. & Linzer, B., 2016, In: IOP Conference Series: Materials Science and Engineering. 119, 1, p. 12001 1 p.

    Research output: Contribution to journal › Article › Research › peer-review

  37. Published

    Modeling of inclusion formation during the solidification of steel

    You, D., Michelic, S. K., Bernhard, C., Loder, D. & Wieser, G., 2016, In: ISIJ international. 56, 10, p. 1770-1778 9 p.

    Research output: Contribution to journal › Article › Research › peer-review

  38. Published

    Numerical simulation and experimental validation of the formation of shrinkage cavity during solidification of steel

    Riedler, M., Michelic, S. & Bernhard, C., 2016, Conference Proceedings to the 25th Anniversary International Conference on Metallurgy and Materials.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  39. Published

    On the modelling of microsegregation in steels involving thermodynamic databases

    You, D., Bernhard, C., Michelic, S., Wieser, G. & Presoly, P., 2016, IOP Conference Series: Materials Science and Engineering. Vol. 119. p. 012027 1 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  40. 2015
  41. Published

    Thermodynamic optimization of individual steel databases by means of systematic DSC measurement

    Presoly, P., Six, J. & Bernhard, C., 3 Nov 2015, International Conference on Materials, Processing and Product Engineering. Leoben, 8 p. 29

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  42. Published

    Untersuchung des Auflöseverhaltens oxidischer Einschlüsse in CaO-Al2O3-SiO2-MgO Schlacken mittels Hochtemperatur-Laser-Scanning Konfokalmikroskopie

    Michelic, S., Goriupp, J., Feichtinger, S., Kang, Y.-B., Bernhard, C. & Schenk, J., 2 Nov 2015.

    Research output: Contribution to conference › Presentation › Research

  43. Published

    Contribution of the Chair of Ferrous Metallurgy at the Montanuniversitaet Leoben to Enhance the Sustainability of Steel Production and Application

    Schenk, J., Bernhard, C. & Michelic, S., Oct 2015, In: Berg- und hüttenmännische Monatshefte : BHM. 160, 10, p. 489-494

    Research output: Contribution to journal › Article › Research › peer-review

  44. Published

    A numerical solidification model as link between laboratory experiments and the continuous casting process

    Riedler, M., Arth, G., Bernhard, C., Presoly, P., You, D. & Ilie, S., 24 Sept 2015.

    Research output: Contribution to conference › Presentation › Research

  45. Published

    Formation of shrinkage porosity during solidification of steel: Numerical simulation and experimental validation

    Riedler, M., Michelic, S. & Bernhard, C., 23 Sept 2015, Proceedings of the 2015 International Symposium on Liquid Metal Processing and Casting.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  46. Published

    In-situ observation of the behavior of non-metallic inclusions at different interfaces in the system steel-slag-refractory

    Michelic, S., Dieguez Salgado, U. & Bernhard, C., 21 Sept 2015, LMPC 2015: Proceedings of the 2015 International Symposium on Liquid Metal Processing and Casting. p. 143-152 10 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  47. Published

    On the importance of thermodynamic investigations for the re-assessment of selected ternary Fe-base systems

    Presoly, P. & Bernhard, C., 20 Sept 2015, Proceedings of the 2015 International Symposium on Liquid Metal Processing and Casting. Leoben, Vol. 2015.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  48. Published

    Analysis of Solidification of High Manganese Steels Using Improved Differential Thermal Analysis Method

    Zhuang, C., Liu, J., Bernhard, C. & Presoly, P., 1 Aug 2015, In: Journal of iron and steel research international. 22, 8, p. 709-714 6 p., 8.

    Research output: Contribution to journal › Article › Research › peer-review

  49. Published

    Untersuchung der Wirkung von Legierungselementen auf die peritektische Phasenumwandlung in Stählen

    Presoly, P. & Bernhard, C., Jul 2015, In: Berg- und hüttenmännische Monatshefte : BHM. 160, 07, p. 337-341 5 p.

    Research output: Contribution to journal › Article › Research › peer-review

  50. Published

    Experimental und numerical investigations on cooling efficiency in the secondary cooling zone during continuous casting of steel

    Arth, G., Taferner, M. & Bernhard, C., 16 Jun 2015. 7 p.

    Research output: Contribution to conference › Paper

  51. Published

    In-situ Observation of Austenite Grain Growth in Plain Carbon Steels by Means of High-Temperature Laser Scanning Confocal Microscopy

    Fuchs, N., Krajewski, P. & Bernhard, C., May 2015, In: Berg- und hüttenmännische Monatshefte : BHM. 160, 05, p. 214-220 7 p.

    Research output: Contribution to journal › Article › Research › peer-review

  52. Published

    A novel Approach for the Simulation of Surface Crack Formation in Continuous Casting

    Krajewski, P., Krobath, R., Bernhard, C., Miettinen, J., Louhenkilpi, S., Ilie, S. & Schaden, T., Mar 2015, In: Berg- und hüttenmännische Monatshefte : BHM. 160, 3, p. 109-116 8 p.

    Research output: Contribution to journal › Article › Research › peer-review

  53. Published

    Experimental und Numerical Investigations on Hot Tearing during Continuous Casting

    Arth, G., Ilie, S., Pierer, R. & Bernhard, C., Mar 2015, In: Berg- und hüttenmännische Monatshefte : BHM. 160, 3, p. 103-108 6 p.

    Research output: Contribution to journal › Article › Research › peer-review

Previous 1 2 3 4 5 Next
View graph of relations

Contact

Phone: 2220

Latest Research Output

View more (229)