Christian Bernhard

1 - 229 out of 229Page size: 500

Publications / Theses

  1. 2024
  2. Published

    Influence of Silicon and Tramp Elements on the High-temperature Oxidation of Steel in Direct Casting and Rolling Processes

    Gaiser, G., Presoly, P., Bernhard, C., Baumgartner, K. & Grosseiber, S., 2024, In: ISIJ international. 64, 9, p. 1439-1449 11 p.

    Research output: Contribution to journal › Article › Research › peer-review

  3. 2021
  4. Published

    Potential and limitations of direct austenite grain growth measurement by means of HT-LSCM

    Fuchs, N. & Bernhard, C., Sept 2021, In: Materials Today Communications. 28, 102468.

    Research output: Contribution to journal › Article › Research › peer-review

  5. Published

    Simulation of the refining process of ultra-low carbon (Ulc) steel

    You, D., Bernhard, C., Viertauer, A. & Linzer, B., Aug 2021, In: Crystals. 11, 8, 893.

    Research output: Contribution to journal › Article › Research › peer-review

  6. Published

    An Assessment of Analytical Liquidus Equations for Fe-C-Si-Mn-Al-P-Alloyed Steels Using DSC/DTA Techniques

    Bernhard, M. C., Presoly, P., Bernhard, C., Hahn, S. & Ilie, S., Jun 2021, In: Metallurgical and Materials Transactions B: Process Metallurgy and Materials Processing Science. 2021, June, 10 p.

    Research output: Contribution to journal › Article › Research › peer-review

  7. Published

    Modeling of the BOF Tapping Process: The Reactions in the Ladle

    You, D., Bernhard, C., Mayer, P., Fasching, J., Kloesch, G., Rössler, R. & Ammer, R., Jun 2021, In: Metallurgical and Materials Transactions B: Process Metallurgy and Materials Processing Science. 52.2021, 3, p. 1854-1865 12 p.

    Research output: Contribution to journal › Article › Research › peer-review

  8. E-pub ahead of print

    Statistical Analysis of the Inclusions in Rare Earth-M (M = Ca and Ti) Treated Steel

    Xie, Y., Song, M., Wang, B., Zhu, H., Xue, Z., Mayerhofer, A., Michelic, S. K., Bernhard, C. & Schenk, J., 29 Apr 2021, (E-pub ahead of print) In: Metallurgical and Materials Transactions B: Process Metallurgy and Materials Processing Science.

    Research output: Contribution to journal › Article › Research › peer-review

  9. Published

    Characterization of the gamma-loop in the Fe-P system by coupling DSC and HT-LSCM with complementary in-situ experimental techniques

    Bernhard, M., Fuchs, N., Presoly, P., Angerer, P., Friessnegger, B. & Bernhard, C., Apr 2021, In: Materials characterization. 174

    Research output: Contribution to journal › Article › Research › peer-review

  10. Published

    Characterization of the γ-loop in the Fe-P system by coupling DSC and HT-LSCM with complementary in-situ experimental techniques

    Bernhard, M. C., Fuchs, N., Presoly, P., Angerer, P., Friessnegger, B. & Bernhard, C., 6 Mar 2021, In: Materials characterization. 174.2021, April, 17 p., 111030.

    Research output: Contribution to journal › Article › Research › peer-review

  11. Published

    Influence of Slag Viscosity and Composition on the Inclusion Content in Steel

    You, D., Bernhard, C., Mayerhofer, A. & Michelic, S. K., 2021, In: ISIJ international. 61, 12, p. 2991-2997

    Research output: Contribution to journal › Article › Research › peer-review

  12. 2020
  13. Published

    Modeling of Ladle Refining Process Considering Mixing and Chemical Reaction

    You, D., Michelic, S. K. & Bernhard, C., 1 Nov 2020, In: Steel research international. 91.2020, 11, 9 p., 2000045.

    Research output: Contribution to journal › Article › Research › peer-review

  14. Published

    Evaluation of the Iron Content in Non-Metallic Inclusions in Steel for (Sub)microscopic Steel Cleanness Description

    Mayerhofer, A., Michelic, S. K., Presoly, P. & Bernhard, C., 22 Oct 2020, p. 1-9.

    Research output: Contribution to conference › Paper › peer-review

  15. Published

    Investigation of Fe–C–Cr and Fe–C–Cr–Ni-based systems with the use of DTA and HT-LSCM methods

    Drozdová, Ľ., Smetana, B., Presoly, P., Novák, V., Machů, M., Bernhard, M., Francová, H., Zlá, S., Řeháčková, L. & Bernhard, C., 1 Oct 2020, In: Journal of Thermal Analysis and Calorimetry. 142, 2, p. 535-546 12 p.

    Research output: Contribution to journal › Article › Research › peer-review

  16. Published

    Study on inclusion evolution through Si/Mn deoxidation in medium-carbon steels

    Kirchheimer, K., Schnitzer, R., Klösch, G., Fasching, J., Bernhard, C. & Michelic, S., 3 Sept 2020, Proceedings of the Iron and Steel Technology Conference, AISTech 2020. p. 1491-1502 12 p. (AISTech - Iron and Steel Technology Conference Proceedings; vol. 2).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  17. Published

    Experimental Study of High Temperature Phase Equilibria in the Iron-Rich Part of the Fe-P and Fe-C-P Systems

    Bernhard, M. C., Presoly, P., Fuchs, N., Bernhard, C. & Kang, Y.-B., 23 Jul 2020, In: Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science. 51.2020, 10, p. 5351-5364 14 p.

    Research output: Contribution to journal › Article › Research › peer-review

  18. Published

    Experimental Quantification of Critical Parameters for Prediction of Surface Crack Formation in Continuous Casting

    Krobath, R. & Bernhard, C., 7 Jul 2020, In: Steel research international. 91.2020, 10, 8 p., 2000234.

    Research output: Contribution to journal › Article › Research › peer-review

  19. Published

    Study on the Possible Error Due to Matrix Interaction in Automated SEM/EDS Analysis of Nonmetallic Inclusions in Steel by Thermodynamics, Kinetics and Electrolytic Extraction

    Mayerhofer, A., You, D., Presoly, P., Bernhard, C. & Michelic, S. K., 29 Jun 2020, In: Metals : open access journal . 10.2020, 7, p. 1-16 16 p., 860.

    Research output: Contribution to journal › Article › Research › peer-review

  20. Published

    Critical evaluation and thermodynamic modeling of the Fe–P and Fe–C–P system

    Bernhard, M. C., Kang, Y.-B., Presoly, P., Gheribi, A. & Bernhard, C., 15 Jun 2020, In: Calphad: Computer Coupling of Phase Diagrams and Thermochemistry. 70.2020, September, 101795.

    Research output: Contribution to journal › Article › Research › peer-review

  21. Published

    Elasto-Viscoplastic Material Model of a Directly-Cast Low-Carbon Steel at High Temperatures

    Krobath, M., Krobath, R., Bernhard, C. & Ecker, W., 15 May 2020, In: Materials. 13.2020, 10, 13 p., 2281.

    Research output: Contribution to journal › Article › Research › peer-review

  22. Published

    Utilization of Experimental Data as Boundary Conditions for the Solidification Model Tempsimu-3D

    Preuler, L., Louhenkilpi, S., Bernhard, C., Ilie, S. & Taferner, M., 17 Mar 2020, In: Berg- und hüttenmännische Monatshefte : BHM. 165.2020, 5, p. 237-242 6 p.

    Research output: Contribution to journal › Article › Research

  23. Published

    HT-LSCM as a Tool for Indirect Determination of Precipitates by Real-Time Grain Growth Observations

    Fuchs, N., Bernhard, C., Michelic, S. & Dippenaar, R., 1 Jan 2020, TMS 2020 149th Annual Meeting and Exhibition Supplemental Proceedings. Peng, Z., Hwang, J.-Y., Downey, J., Gregurek, D., Zhao, B., Yucel, O., Keskinkilic, E., Jiang, T., White, J. & Mahmoud, M. (eds.). Springer, p. 47-55 9 p. (Minerals, Metals and Materials Series).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  24. 2019
  25. Published

    The role of FeTi-addition on micro-inclusions in the production of ULC steel grades via RH-process route

    Bernhard, C., Dorrer, P., Michelic, S. K. & Rössler, R., 9 Oct 2019, In: Berg- und hüttenmännische Monatshefte : BHM. 2019, 11, p. 475-478 4 p.

    Research output: Contribution to journal › Article › Research › peer-review

  26. Published

    The Role of Grain Boundary Oxidation on Surface Crack Formation under Continuous Casting Conditions

    Krobath, R., Bernhard, C., Ilie, S., Six, J., Hahn, S. & Pennerstorfer, P., 4 Oct 2019, In: Berg- und hüttenmännische Monatshefte : BHM. 164, 11, p. 461 - 465

    Research output: Contribution to journal › Article › Research › peer-review

  27. Published

    Analyse von Fe,Mn-Oxiden mittels REM/EDX: Bringt die elektrolytische Extraktion was sie verspricht

    Mayerhofer, A., Michelic, S. K. & Bernhard, C., 18 Sept 2019, p. 181-186. 6 p.

    Research output: Contribution to conference › Paper › peer-review

  28. Published

    High precious phase diagrams – a roadmap for a successful casting processing

    Presoly, P., Bernhard, M. C., Bernhard, C., Hahn, S., Pennerstorfer, P., Ilie, S. & Six, J., 26 Jun 2019, 4th ESTAD European Steel Technology and Appliciation Days. Steel Institute VDEh, 10 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  29. Published

    The role of grain boundary oxidation on surface crack formation under continuous casting conditions

    Krobath, R., Bernhard, C., Ilie, S., Six, J., Hahn, S. & Pennerstorfer, P., 26 Jun 2019, Proceedings of the 4th ESTAD . Duesseldorf, Germany: Steel Institute VDEh

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  30. Published

    Cerium Containing Inclusions: Kinetic Model and Experimental Results

    Baumgartner, K., Bernhard, C., You, D. & Michelic, S. K., 20 Jun 2019.

    Research output: Contribution to conference › Poster › Research

  31. Published

    Investigation of water droplet impingement under conditions of the secondary cooling zone of a continuous caster

    Preuler, L., Peyha, M., Weiß, C., Bernhard, C. & Ilie, S., 6 May 2019, Proceedings of the AISTech 2019, Pittsburgh. 10 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  32. Published

    Kornfeinung ausscheidungsverfestigter Hochtemperaturferrite mittels Ce-haltiger Einschlüsse

    Godor, F. R., Mayerhofer, A., Presoly, P., Clemens, H., Mayer, S. & Bernhard, C., 4 Apr 2019, In: Berg- und hüttenmännische Monatshefte : BHM. 164.2019, 5, p. 220-224 5 p.

    Research output: Contribution to journal › Article › Research › peer-review

  33. Published

    In-situ Untersuchung von Austenitkornwachstumsprozessen in Stählen mittels Hochtemperatur Laser-Scanning-Konfokal-Mikroskop

    Fuchs, N. & Bernhard, C., 1 Apr 2019, In: Berg- und hüttenmännische Monatshefte : BHM. 164.2019, 5, p. 200-204 5 p.

    Research output: Contribution to journal › Article › Research › peer-review

  34. Published

    In-situ observation of non-metallic inclusions in the system steel-slag-refractory: Set-up, limitations and results

    Michelic, S. K., Dieguez Salgado, U. & Bernhard, C., 11 Mar 2019.

    Research output: Contribution to conference › Presentation › Research › peer-review

  35. Published

    Study on the Influence of FeTi‐Addition on the Inclusion Population in Ti‐Stabilized ULC Steels and Its Consequences for SEN‐Clogging

    Dorrer, P., Michelic, S. K., Bernhard, C., Penz, A. & Rössler, R., 1 Jan 2019, In: Steel research international. 2019, 5, 13 p., 1800635.

    Research output: Contribution to journal › Article › Research › peer-review

  36. Published

    Evaluation of AHSS concepts with a focus on the product properties and appropriate casting characteristics of Arvedi ESP thin slab casters

    Bernhard, C., Linzer, B., Presoly, P., Watzinger, I. & Watzinger, J., 2019, In: IOP Conference Series: Materials Science and Engineering. 529.2019, 012071, p. 1-10 10 p., 012071.

    Research output: Contribution to journal › Article › Research › peer-review

  37. Published

    Modeling of the secondary refining process of steel

    You, D., Michelic, S. K. & Bernhard, C., 2019.

    Research output: Contribution to conference › Presentation › Research › peer-review

  38. Published

    The role of FeTi-addition on micro-inclusions in the production of ULC steel grades via RH-process route

    Bernhard, C., Dorrer, P., Michelic, S. K. & Rössler, R., 2019, Proceedings of the 4th European Steel Technology and Application Days (ESTAD). 7 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  39. 2018
  40. Published

    Slag characterisation of 308L-type stainless steel rutile flux-cored wires

    Holly, S., Mayer, P. M., Bernhard, C. & Posch, G., 30 Nov 2018, In: Welding in the world. 63, p. 293-311

    Research output: Contribution to journal › Article › Research › peer-review

  41. Published

    Neuartige Zweistoffdüsen steigern die Energieeffizienz der Sekundärkühlung

    Wolff, R., Frick, J., Bernhard, C. & Taferner, M., 7 Nov 2018, In: Stahl und Eisen. 2018, 138, p. 111-114

    Research output: Contribution to journal › Article › Research › peer-review

  42. Published

    Influence of casting temperature on the microstructure of AISI M42 high speed steel

    Baumgartner, K., Bernhard, C., Pfeiffer, A., Wieser, G. & Hafok, M., 18 Oct 2018, Ingot rolling, casting, forging 2018. p. 321 - 329 ICRF-173

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  43. Published

    Untersuchung des Ausscheidungsverhaltens von H-Karbiden in einer kohlenstoffhaltigen TiAl Legierung mittels in-und ex-situ Experimenten

    Burtscher, M., Kirchheimer, K., Weißensteiner, I., Bernhard, C., Lederhaas, B., Klein, T., Mayer, S. & Clemens, H., 1 Oct 2018, In: Praktische Metallographie/Practical Metallography. 55, 10, p. 693-703 11 p.

    Research output: Contribution to journal › Article › Research › peer-review

  44. Published

    Experimental Investigation of the System Nonmetallic Inclusion-Molten Steel-Refractory System at High Temperatures

    Diéguez Salgado, U., Dorrer, P., Michelic, S. K. & Bernhard, C., Oct 2018, In: Journal of Materials Engineering and Performance. 27, 10, p. 4983-4988 6 p.

    Research output: Contribution to journal › Article › Research › peer-review

  45. Published

    An alternative approach for the experimental verification of microsegregation models using an in-situ hot tensile test during solidification of steel

    Bernhard, M. C., Presoly, P., Bernhard, C. & You, D., 3 Sept 2018, Proceedings of the 7th International Conference on Solidification and Gravity 2018. Miskolc-Lillafüred, Hungary

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  46. Published

    High concentrations at the final solidification of advanced steels: Thermodynamic evaluation of replicated “segregation-samples” by means of DTA/DSC-measurements

    Presoly, P., Bernhard, M. C., You, D. & Bernhard, C., 3 Sept 2018, Solidification and Gravity VII. p. 138-143

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  47. Published

    Fluid Force-Induced Detachment Criteria for Nonmetallic Inclusions Adhered to a Refractory/Molten Steel Interface

    Dieguez Salgado, U., Weiß, C., Michelic, S. K. & Bernhard, C., 1 Aug 2018, In: Metallurgical and Materials Transactions B: Process Metallurgy and Materials Processing Science. 49, 4, p. 1632-1643 12 p.

    Research output: Contribution to journal › Article › Research › peer-review

  48. Published

    Formation of multi-type inclusions during the cooling and solidification of steel: A trend model

    You, D., Michelic, S. K. & Bernhard, C., 13 Jun 2018, In: Metals : open access journal . 8, 6, 452.

    Research output: Contribution to journal › Article › Research › peer-review

  49. Published

    Investigation of the Fe-C-Si-Mn system with special focus on the Fe – 3 wt.-% Si – high Mn section

    Presoly, P., Bernhard, M. C. & Bernhard, C., 30 May 2018, CALPHAD XLVII - Conference Program. p. 50

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  50. Published

    Energy efficiency in secondary cooling - New generation of air-mist nozzles with reduced air consumption and high cooling efficiency

    Wolff, R., Frick, J., Bernhard, C. & Taferner, M., 1 Jan 2018, AISTech 2018 Proceedings - Iron and Steel Technology Conference and Exposition. Vol. 2018-May. p. 145-152 8 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  51. Published

    Energy Efficiency in Secondary Cooling – new generation of air-mist nozzles with reduced air consumption and high cooling efficiency

    Wolff, R., Frick, J., Bernhard, C. & Taferner, M., 2018, Proceedings. 8 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  52. Published

    H-carbide precipitation behaviour in a C-containing β-solidifying TiAl alloy

    Burtscher, M., Kirchheimer, K., Weißensteiner, I., Bernhard, C., Klein, T., Mayer, S. & Clemens, H., 2018.

    Research output: Contribution to conference › Poster › Research

  53. Published

    Invenstigation of the Precipitation Behavior of H-Carbides in a TiAI Alloy containing Carbon by means of in- and ex-situ Characterization

    Burtscher, M., Kirchheimer, K., Weißensteiner, I., Bernhard, C., Lederhaas, B., Klein, T., Mayer, S. & Clemens, H., 2018, In: Practical metallography = Praktische Metallographie. 2018, 10, p. 693-703

    Research output: Contribution to journal › Article › Research › peer-review

  54. Published

    Kornfeinung ausscheidungsverfestigter Hochtemperaturferrite mittels Ce-haltiger Einschlüsse

    Godor, F. R., Mayerhofer, A., Presoly, P., Clemens, H., Mayer, S. & Bernhard, C., 2018, Praktische Metallographie Sonderband: Fortschritte in der Metallographie. 1 ed. Vol. 52. p. 319-324

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  55. 2017
  56. Published

    Charakterisierung von azikularferritischen Phasenanteilen in HSLA- Stählen und deren Auswirkung auf die mechanischen Kennwerte bei Kleinstproben

    Mayerhofer, A., Bernhard, C. & Michelic, S. K., 13 Sept 2017, p. 125. 130 p.

    Research output: Contribution to conference › Paper › peer-review

  57. Published

    Further development and validation of IDS by means of selected experiments

    Presoly, P., Bernhard, C., Fuchs, N., Miettinen, J., Louhenkilpi, S. & Laine, J., 27 Jun 2017, Proceedings of 9th ECCC European Continuous Casting Conference - ECCC2017. Vienna: ASMET

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  58. Published

    The potential for grain refinement of a super austenitic stainless steel with a cerium grain refiner

    Baumgartner, K., Bernhard, C., Presoly, P., Hafok, M. & Leitner, H., 25 May 2017, ESSC and DUPLEX 2017 - 9th European Stainless Steel Conference - Science and Market and 5th European Duplex Stainless Steel Conference and Exhibition. Associazione Italiana di Metallurgia, Vol. 2017-May.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  59. Published

    A New Experimental Setup for the Simulation of Surface Crack Formation in the Continuous Casting Process

    Krobath, R. & Bernhard, C., 8 May 2017, p. 1827 - 1837. 11 p.

    Research output: Contribution to conference › Paper › peer-review

  60. Published

    On the Capability of Nonmetallic Inclusions to Act as Nuclei for Acicular Ferrite in Different Steel Grades

    Loder, D., Michelic, S. K., Mayerhofer, A. & Bernhard, C., 4 May 2017, In: Metallurgical and Materials Transactions B, Process metallurgy and materials processing science. 48, 4, p. 1992-2006 15 p.

    Research output: Contribution to journal › Article › Research › peer-review

  61. Published

    A new method for the experimental simulation of surface crack formation in continuous casting

    Krobath, R., Bernhard, C., Ilie, S., Six, J. & Hahn, S., Apr 2017, In: Metallurgia Italiana. 1, 4, p. 5-13

    Research output: Contribution to journal › Article › Research › peer-review

  62. Published

    Influence of Silicon and Manganese on the Peritectic Range for Steel Alloys

    Presoly, P. & Bernhard, C., Apr 2017, In: Iron and Steel Technology. 2017, 4

    Research output: Contribution to journal › Article › Research › peer-review

  63. Published

    Modeling of manganese sulfide formation during the solidification of steel

    You, D., Michelic, S. K., Wieser, G. & Bernhard, C., Feb 2017, In: Journal of materials science. 52, 3, p. 1797-1812

    Research output: Contribution to journal › Article › Research › peer-review

  64. Published

    Influence of operation parameters on the cooling performance of water-air nozzles

    Preuler, L., Bernhard, C., Ilie, S. & Six, J., 1 Jan 2017, METAL 2017 - 26th International Conference on Metallurgy and Materials, Conference Proceedings. Vol. 2017-January. p. 45-51 7 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  65. Published

    Acicular Ferrite Formation and Its Influencing Factors - A Review

    Loder, D., Michelic, S. & Bernhard, C., Jan 2017, In: Journal of Materials Science Research. 6, 1, p. 24-43

    Research output: Contribution to journal › Article › Research › peer-review

  66. Published

    Experimental Study on the Behavior of TiN and Ti2O3 Inclusions in Contact with CaO-Al2O3-SiO2-MgO Slags

    Michelic, S. K. & Bernhard, C., 2017, In: Scanning.

    Research output: Contribution to journal › Article › Research › peer-review

  67. Published

    Kinetic model on manganese sulfide formation during solidification of steel

    You, D., Michelic, S. K., Presoly, P. & Bernhard, C., 2017, 6th Decennial International Conference on Solidification Processing (SP17).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  68. Published

    Modeling Inclusion Formation during Solidification of Steel: A Review

    You, D., Michelic, S. K., Presoly, P., Liu, J. & Bernhard, C., 2017, In: Metals : open access journal . 7, 11, p. 460 1 p.

    Research output: Contribution to journal › Article › Research › peer-review

  69. Published

    On the Relevance of Microsegregation Models for Process Control in Continuous Casting of Steel

    Bernhard, M. C., Presoly, P., Bernhard, C., Six, J. & Ilie, S., 2017, Conference Proceedings of the 26th Anniversary International Conference on Metallurgy and Materials - Metal 2017. Brno, Czech Republic

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  70. Published

    Study of Clogging Deposit Buildup in Al-killed and Ca-Treated High-Sulfur Steels With Focus on the Steel/Refractory Interface

    Dorrer, P., Michelic, S., Klösch, G., Reiter, J., Paul, A. & Bernhard, C., 2017, AISTech 2017 Proceedings. p. 1555 - 1565

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  71. Published

    Untersuchungen des Ausscheidungsverhaltens von H-Karbiden in einer kohlenstoffhaltigen TiAl Legierung mittels in- und ex-situ Experimenten

    Burtscher, M., Kirchheimer, K., Weißensteiner, I., Bernhard, C., Lederhaas, B., Klein, T., Mayer, S. & Clemens, H., 2017, Praktische Metallographie Sonderband 51. p. 55-60

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  72. 2016
  73. Published

    A new method for the experimental simulation of surface crack formation in continuous casting

    Krobath, R., Bernhard, C., Ilie, S., Six, J. & Hahn, S., 1 Dec 2016.

    Research output: Contribution to conference › Presentation › Research › peer-review

  74. Published

    HT-LSCM - A valuable tool for surface microstructure investigations

    Fuchs, N., Krobath, R., Bernhard, C., Ilie, S. & Xia, G., 1 Dec 2016.

    Research output: Contribution to conference › Presentation › Research › peer-review

  75. Published

    In-situ Beobachtung des Verhaltens nichtmetallischer Einschlüsse mittels Hochtemperatur- Laser-Scanning- Konfokalmikroskopie

    Michelic, S., Dieguez Salgado, U., Loder, D. & Bernhard, C., Sept 2016, In: Gießerei-Praxis (Giessereipraxis). 67, 9, p. 337 341 p.

    Research output: Contribution to journal › Article › Research › peer-review

  76. Published

    Experimental und numerical investigations on cooling efficiency of Air-Mist nozzles on steel during continuous casting

    Arth, G., Taferner, M., Bernhard, C. & Michelic, S., 10 Aug 2016, In: IOP Conference Series: Materials Science and Engineering. 143, 1, 012033.

    Research output: Contribution to journal › Article › Research › peer-review

  77. Published

    Formation of shrinkage porosity during solidification of steel: Numerical simulation and experimental validation

    Riedler, M., Michelic, S. & Bernhard, C., 10 Aug 2016, In: IOP Conference Series: Materials Science and Engineering. 143, 1, 012035.

    Research output: Contribution to journal › Article › Research › peer-review

  78. Published

    On the importance of thermodynamic investigations for the re-assessment of selected ternary Fe-base systems

    Presoly, P. & Bernhard, C., 10 Aug 2016, In: IOP Conference Series: Materials Science and Engineering. 143, 1, 012034.

    Research output: Contribution to journal › Conference article › peer-review

  79. Published

    Systematische Untersuchung der Azikularferritbildung in Stählen

    Loder, D., Michelic, S. & Bernhard, C., 11 Jul 2016, In: Berg- und hüttenmännische Monatshefte : BHM. 161, 7, p. 315-320

    Research output: Contribution to journal › Article › Research › peer-review

  80. Published

    Microsegregation Model with Local Equilibrium Partition Coefficients During Solidification of Steels

    You, D., Bernhard, C., Wieser, G. & Michelic, S., Jul 2016, In: Steel research international. 87, 7, p. 840-849

    Research output: Contribution to journal › Article › Research › peer-review

  81. Published

    Near net shape casting - current status and future perspectives

    Bernhard, C., 22 Jun 2016.

    Research output: Contribution to conference › Presentation › Transfer

  82. Published

    A transient 2D solidification model for defect prevention in the continuous casting process

    Bernhard, C., 25 May 2016.

    Research output: Contribution to conference › Presentation › Research

  83. Published

    Influence of Silicon and Manganese on the Peritectic Range for Steel Alloys

    Presoly, P. & Bernhard, C., 16 May 2016, Proceedings AISTech 2016. Pittsburgh, USA, p. 2497-2506 10 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  84. Published

    Research on continuous casting at University of Leoben - An overview

    Bernhard, C., 11 May 2016.

    Research output: Contribution to conference › Presentation › Transfer

  85. Published

    Charakterisierung der Erstarrungsmechanismen beim Vergießen großer Blöcke mit einem neuen Gießverfahren

    Riedler, M., Michelic, S. & Bernhard, C., 10 May 2016.

    Research output: Contribution to conference › Poster › Research

  86. Published

    Thermodynamic optimization of individual steel database by means of systematic DSC measurements according the CALPHAD approach

    Presoly, P., Six, J. & Bernhard, C., 14 Apr 2016, In: IOP Conference Series: Materials Science and Engineering. 119, 1, 012013.

    Research output: Contribution to journal › Conference article › peer-review

  87. Published

    Study on Oxide Inclusion Dissolution in Secondary Steelmaking Slags using High Temperature Confocal Scanning Laser Microscopy

    Michelic, S., Goriupp, J., Feichtinger, S., Kang, Y.-B., Bernhard, C. & Schenk, J., Jan 2016, In: Steel research international. 87, 1, p. 57-67

    Research output: Contribution to journal › Article › Research › peer-review

  88. Published

    Formation of shrinkage porosity during solidification of steel: Numerical simulation and experimental validation

    Riedler, M., Michelic, S. & Bernhard, C., 2016, In: IOP Conference Series: Materials Science and Engineering. 143.2016, 1, 8 p., 012035.

    Research output: Contribution to journal › Article › Research › peer-review

  89. Published

    In-situ observation of the behaviour of non-metallic inclusions at different interfaces in the system steel-slag-refractory

    Michelic, S., Salgado, U. D. & Bernhard, C., 2016, In: IOP Conference Series: Materials Science and Engineering. 143, 1, p. 012010 1 p.

    Research output: Contribution to journal › Article › Research › peer-review

  90. Published

    Investigation of metallurgical phenomena related to process and product development by means of High Temperature Confocal Scanning Laser Microscopy

    Diéguez-Salgado, U., Michelic, S. & Bernhard, C., 2016, In: IOP Conference Series: Materials Science and Engineering. 119, 1, 1 p.

    Research output: Contribution to journal › Article › Research › peer-review

  91. Published

    Investigation of the influence of the chemical composition of HSLA steel grades on the microstructure homogeneity during hot rolling in continuous rolling mills using a fast layer model

    Schmidtchen, M., Rimnac, A., Warczok, P., Kozeschnnik, E., Bernhard, C., Bragin, S., Kawalla, R. & Linzer, B., 2016, In: IOP Conference Series: Materials Science and Engineering. 119, 1, p. 12001 1 p.

    Research output: Contribution to journal › Article › Research › peer-review

  92. Published

    Modeling of inclusion formation during the solidification of steel

    You, D., Michelic, S. K., Bernhard, C., Loder, D. & Wieser, G., 2016, In: ISIJ international. 56, 10, p. 1770-1778 9 p.

    Research output: Contribution to journal › Article › Research › peer-review

  93. Published

    Numerical simulation and experimental validation of the formation of shrinkage cavity during solidification of steel

    Riedler, M., Michelic, S. & Bernhard, C., 2016, Conference Proceedings to the 25th Anniversary International Conference on Metallurgy and Materials.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  94. Published

    On the modelling of microsegregation in steels involving thermodynamic databases

    You, D., Bernhard, C., Michelic, S., Wieser, G. & Presoly, P., 2016, IOP Conference Series: Materials Science and Engineering. Vol. 119. p. 012027 1 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  95. 2015
  96. Published

    Thermodynamic optimization of individual steel databases by means of systematic DSC measurement

    Presoly, P., Six, J. & Bernhard, C., 3 Nov 2015, International Conference on Materials, Processing and Product Engineering. Leoben, 8 p. 29

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  97. Published

    Untersuchung des Auflöseverhaltens oxidischer Einschlüsse in CaO-Al2O3-SiO2-MgO Schlacken mittels Hochtemperatur-Laser-Scanning Konfokalmikroskopie

    Michelic, S., Goriupp, J., Feichtinger, S., Kang, Y.-B., Bernhard, C. & Schenk, J., 2 Nov 2015.

    Research output: Contribution to conference › Presentation › Research

  98. Published

    Contribution of the Chair of Ferrous Metallurgy at the Montanuniversitaet Leoben to Enhance the Sustainability of Steel Production and Application

    Schenk, J., Bernhard, C. & Michelic, S., Oct 2015, In: Berg- und hüttenmännische Monatshefte : BHM. 160, 10, p. 489-494

    Research output: Contribution to journal › Article › Research › peer-review

  99. Published

    A numerical solidification model as link between laboratory experiments and the continuous casting process

    Riedler, M., Arth, G., Bernhard, C., Presoly, P., You, D. & Ilie, S., 24 Sept 2015.

    Research output: Contribution to conference › Presentation › Research

  100. Published

    Formation of shrinkage porosity during solidification of steel: Numerical simulation and experimental validation

    Riedler, M., Michelic, S. & Bernhard, C., 23 Sept 2015, Proceedings of the 2015 International Symposium on Liquid Metal Processing and Casting.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  101. Published

    In-situ observation of the behavior of non-metallic inclusions at different interfaces in the system steel-slag-refractory

    Michelic, S., Dieguez Salgado, U. & Bernhard, C., 21 Sept 2015, LMPC 2015: Proceedings of the 2015 International Symposium on Liquid Metal Processing and Casting. p. 143-152 10 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  102. Published

    On the importance of thermodynamic investigations for the re-assessment of selected ternary Fe-base systems

    Presoly, P. & Bernhard, C., 20 Sept 2015, Proceedings of the 2015 International Symposium on Liquid Metal Processing and Casting. Leoben, Vol. 2015.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  103. Published

    Analysis of Solidification of High Manganese Steels Using Improved Differential Thermal Analysis Method

    Zhuang, C., Liu, J., Bernhard, C. & Presoly, P., 1 Aug 2015, In: Journal of iron and steel research international. 22, 8, p. 709-714 6 p., 8.

    Research output: Contribution to journal › Article › Research › peer-review

  104. Published

    Untersuchung der Wirkung von Legierungselementen auf die peritektische Phasenumwandlung in Stählen

    Presoly, P. & Bernhard, C., Jul 2015, In: Berg- und hüttenmännische Monatshefte : BHM. 160, 07, p. 337-341 5 p.

    Research output: Contribution to journal › Article › Research › peer-review

  105. Published

    Experimental und numerical investigations on cooling efficiency in the secondary cooling zone during continuous casting of steel

    Arth, G., Taferner, M. & Bernhard, C., 16 Jun 2015. 7 p.

    Research output: Contribution to conference › Paper

  106. Published

    In-situ Observation of Austenite Grain Growth in Plain Carbon Steels by Means of High-Temperature Laser Scanning Confocal Microscopy

    Fuchs, N., Krajewski, P. & Bernhard, C., May 2015, In: Berg- und hüttenmännische Monatshefte : BHM. 160, 05, p. 214-220 7 p.

    Research output: Contribution to journal › Article › Research › peer-review

  107. Published

    A novel Approach for the Simulation of Surface Crack Formation in Continuous Casting

    Krajewski, P., Krobath, R., Bernhard, C., Miettinen, J., Louhenkilpi, S., Ilie, S. & Schaden, T., Mar 2015, In: Berg- und hüttenmännische Monatshefte : BHM. 160, 3, p. 109-116 8 p.

    Research output: Contribution to journal › Article › Research › peer-review

  108. Published

    Experimental und Numerical Investigations on Hot Tearing during Continuous Casting

    Arth, G., Ilie, S., Pierer, R. & Bernhard, C., Mar 2015, In: Berg- und hüttenmännische Monatshefte : BHM. 160, 3, p. 103-108 6 p.

    Research output: Contribution to journal › Article › Research › peer-review

  109. Published

    Characterization of TiN, TiC and Ti(C,N) in titanium-alloyed ferritic chromium steels focusing on the significance of different particle morphologies

    Michelic, S., Loder, D., Reip, T., Ardehali Barani, A. & Bernhard, C., 2015, In: Materials characterization. 100, p. 61-67

    Research output: Contribution to journal › Article › Research › peer-review

  110. 2014
  111. Published

    Effect of nucleation undercooling on the kinetics and mechanism of the peritectic phase transition in steel

    Griesser, S., Bernhard, C. & Dippenaar, R., 1 Jan 2014, In: Acta Materialia. 81, p. 111-120 10 p.

    Research output: Contribution to journal › Article › Research › peer-review

  112. Published

    In-situ quantification of micro-segregation that occurs during the solidification of steel

    Griesser, S., Reid, M., Pierer, R., Bernhard, C. & Dippenaar, R., 1 Jan 2014, In: Steel research international. 85, 8, p. 1257-1265 9 p.

    Research output: Contribution to journal › Article › Research › peer-review

  113. Published

    Mechanism of the peritectic phase transition in Fe-C and Fe-Ni alloys under conditions close to chemical and thermal equilibrium

    Griesser, S., Bernhard, C. & Dippenaar, R., 1 Jan 2014, In: ISIJ international. 54, 2, p. 466-473 8 p.

    Research output: Contribution to journal › Article › Research › peer-review

  114. Published

    A novel approach for the simulation of surface crack formation in continuous casting

    Krajewski, P., Krobath, R., Bernhard, C., Miettinen, J., Louhenkilpi, S., Ilie, S. & Schaden, T., 2014, In: Berg- und hüttenmännische Monatshefte : BHM. p. x-y

    Research output: Contribution to journal › Article › Research › peer-review

  115. Published

    A novel approach for the simulation of surface crack formation in continuous casting

    Krajewski, P., Krobath, R., Bernhard, C., Miettinen, J., Louhenkilpi, S., Ilie, S. & Schaden, T., 2014, Proceedings of the 8th European Continuous Casting Conference. p. x-y

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  116. Published

    Ätzmethoden für die computergestützte Analyse von Azikularferrit im Gefüge

    Otto, C., Loder, D., Michelic, S. & Bernhard, C., 2014.

    Research output: Contribution to conference › Poster › Research

  117. Published

    Austenite Grain Growth and the Surface Quality of Continuously Cast Steel

    Dippenaar, R., Bernhard, C., Schider, S. & Wieser, G., 2014, In: Metallurgical and Materials Transactions B: Process Metallurgy and Materials Processing Science. 45B, p. 409-418

    Research output: Contribution to journal › Article › Research › peer-review

  118. Published

    Characterization of acicular ferrite microstructures using etching methods, optical microscopy and HT-LSCM

    Loder, D., Michelic, S. & Bernhard, C., 2014, Sonderbände der praktischen Metallographie - Fortschritte in der Metallographie. p. 125-130

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  119. Published

    Continuous Casting of Hypo-peritectic Steels: Mould Thermal Monitoring and DSC-analysis

    Presoly, P., Xia, G., Reisinger, P. & Bernhard, C., 2014, In: Berg- und hüttenmännische Monatshefte : BHM. 159, p. 430-437

    Research output: Contribution to journal › Article › Research › peer-review

  120. Published

    Diffusional constrained crystal nucleation during peritectic phase transitions

    Griesser, S., Reid, M., Bernhard, C. & Dippenaar, R., 2014, In: Acta materialia. 67, p. 335-341

    Research output: Contribution to journal › Article › Research › peer-review

  121. Published

    Entwicklung von Stahl-Keramik-Verbunden mit verminderter Dichte

    Arth, G., Bernhard, C., Samek, L. & Samoilov, A., 2014, In: Berg- und hüttenmännische Monatshefte : BHM. 159, p. 291-293

    Research output: Contribution to journal › Article › Research › peer-review

  122. Published

    Entwicklung von Stahl-Keramik-Verbunden mit verminderter Dichte

    Arth, G., Bernhard, C., Samek, L. & Samoilov, A., 2014, Forum für Metallurgie und Werkstofftechnik 2014 mit Zukunftskonferenz. p. xx-xx

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  123. Published

    Experimental study on the formation of non-metallic inclusions acting as nuclei for acicular ferrite in HSLA steels through specific deoxidation practice and defined cooling conditions

    Michelic, S., Loder, D., Arth, G. & Bernhard, C., 2014, Materials Science Forum: Proceedings THERMEC 2013. Vol. 783-786. p. 1079-1084

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  124. Published

    Experimental und numerical investigations on hot tearing during continuous casting of steel

    Arth, G., Bernhard, C., Ilie, S., Schaden, T. & Pierer, R., 2014, Conference Proceedings of the 8th ECCC. p. 1-8

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  125. Published

    Experimentelle Simulation der Oberflächenrissbildung beim Stranggießprozess mit Hilfe des IMC-B Versuchs

    Krajewski, P., Bernhard, C., Krobath, R., Schaden, T. & Ilie, S., 2014, In: Berg- und hüttenmännische Monatshefte : BHM. 159, p. 304-305

    Research output: Contribution to journal › Article › Research › peer-review

  126. Published

    Identification of peritectic steel grades by thermal mould monitoring and DSC measurements

    Presoly, P., Bernhard, C. & Xia, G., 2014, Proceedings of the 8th European Continuous Casting Conference. p. x-y

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  127. Published

    IMC-B - a new experimental method to predict the crack susceptiblity under continuous casting conditions

    Krajewski, P., Bernhard, C., Krobath, R., Schaden, T. & Ilie, S., 2014, 1st ESTAD &31st JSI. p. 184-185

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  128. Published

    Influence of thin slab thickness on final strip property in Arvedi ESP plant

    Linzer, B., Watzinger, J., Bragin, S., Bernhard, C. & Bianchi, A., 2014, 8th European Continuous Casting Conference. p. 1-8

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  129. Published

    In situ observation of acicular ferrite formation using HT-LSCM: possibilities, challenges and influencing factors

    Loder, D., Michelic, S., Mayerhofer, A., Bernhard, C. & Dippenaar, R., 2014, Proceedings of MS&T14 . p. 469-476

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  130. Published

    In-situ observation of the dissolution of SiO2 particles in CaO-Al2O3-SiO2 slags and mathematical analysis of its dissolution pattern

    Feichtinger, S., Michelic, S., Kang, Y.-B. & Bernhard, C., 2014, In: Journal of the American Chemical Society. 97, p. 316-325

    Research output: Contribution to journal › Article › Research › peer-review

  131. Published

    The Use of HT-LSCM for the In Situ Observation of Acicular Ferrite

    Loder, D., Michelic, S. & Bernhard, C., 2014.

    Research output: Contribution to conference › Poster › Research

  132. 2013
  133. Published

    ARVEDI ESP PROCESS – AN ULTIMATE TECHNOLOGY CONNECTING CASTING AND ROLLING IN ENDLESS MODE

    Bragin, S., Rimnac, A., Linzer, B., Bianchi, A., Mantova, A., Rizzi, A. & Bernhard, C., 2013, Rolling 2013. p. 1-13

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  134. Published

    Comprehensive Investigations of new Filler Materials for Welding of High Strength Steels

    Schnitzer, R., Rauch, R., Ernst, W., Wagner, J., Baumgartner, S., Leitner, M., Stoschka, M., Schlagradl, T., Schneider, R. & Bernhard, C., 2013, Proceedings of the 3rd International Conference. p. 323-332

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  135. Published

    Effect of titanium on the solidification and postsolidification microstructure of high-strength steel welds

    Vanovsek, W., Bernhard, C., Fiedler, M. & Schnitzer, R., 2013, In: Welding in the world. 57, p. 665-674

    Research output: Contribution to journal › Article › Research › peer-review

  136. Published

    Etching Methods for the Computerized Analysis of Acicular Ferrite in Steel Microstructures

    Loder, D., Michelic, S. & Bernhard, C., 2013.

    Research output: Contribution to conference › Poster › Research

  137. Published

    Identification of Defect Prone Peritectic Steel Grades by Analyzing High-Temperature Phase Transformations

    Presoly, P., Bernhard, C. & Pierer, R., 2013, In: Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science. 44, p. 5377-5388

    Research output: Contribution to journal › Article › Research › peer-review

  138. Published

    IMC-B – ein neuer Ansatz zur Untersuchung der Oberflächenrissbildung im Stranggießprozess

    Krajewski, P., Bernhard, C., Pierer, R., Schneller, F. & Schaden, T., 2013, In: Berg- und hüttenmännische Monatshefte : BHM. p. 108-115

    Research output: Contribution to journal › Article › Research › peer-review

  139. Published

    Inclusion Removal and Modification in Remelting Processes with Special Regard to Inclusion Dissolution in CaO-Al2O3-CaF2 Slags

    Michelic, S., Schider, S. & Bernhard, C., 2013,

    INTECO Melting, Refining, Casting & Remelting Symposium 2013 - Proceedings

    .     p. 172-184

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  140. Published

    Influence of aluminum content on the characterization of microstructure and inclusions in high-strength steel welds

    Vanovsek, W., Bernhard, C., Fiedler, M. & Posch, G., 2013, In: Welding in the world. 57, p. 73-83

    Research output: Contribution to journal › Article › Research › peer-review

  141. Published

    In-situ Beobachtung von Phasenumandlungen in Stählen

    Schider, S., Gamsjäger, E., Michelic, S. & Bernhard, C., 2013, Prakt. Met. Sonderband 45. p. 139-144

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  142. Published

    Systematische Optimierung von Stahleigenschaften durch nichtmetallische Einschlüsse

    Loder, D., Michelic, S. & Bernhard, C., 2013.

    Research output: Contribution to conference › Poster › Research

  143. 2012
  144. Published

    Investigation of alumina wetting by Fe-Ti, Fe-P and Fe-Ti-P alloys

    Karasangabo, A. & Bernhard, C., 1 May 2012, In: Journal of adhesion science and technology. 26, 8-9, p. 1141-1156 16 p.

    Research output: Contribution to journal › Article › Research › peer-review

  145. Published

    A modified cellular automaton method for polydimensional modelling of dendritic growth and microsegregation in multicomponent alloys

    Michelic, S., Thuswaldner, J. & Bernhard, C., 2012, IOP Conf. Series: Materials Science and Engineering. p. 1-9

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  146. Published

    Anwendungsbeispiele für die Verwendung neuer analytischer Prüftechniken bei Hochleistungsstählen

    Werl, R., Klösch, G., Winkler, W., Pissenberger, A., Egger, M., Aigner, S., Pühringer, J., Michelic, S., Bernhard, C., Schützenhöfer, W., Schneider, R. & Schüller, C., 2012, In: Berg- und hüttenmännische Monatshefte : BHM. 157, p. 194-203

    Research output: Contribution to journal › Article › Research › peer-review

  147. Published

    Austenite grain growth and the surface quality of continuously cast steel

    Dippenaar, R., Bernhard, C., Schider, S. & Wieser, G., 2012, 15th International Conference on Advances in Materials Processing Technologies. p. ID-10318

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  148. Published

    Charakterisierung von nichtmetallischen Einschlüssen in Titan legierten ferritischen Chromstählen

    Loder, D., Michelic, S., Reip, T. & Bernhard, C., 2012.

    Research output: Contribution to conference › Poster › Research › peer-review

  149. Published

    Critical evaluation of prospects and limitations of steel cleanness characterisation using automated SEM/EDS analysis

    Michelic, S., Bernhard, C., Wieser, G. & Lederhaas, B., 2012, Proceedings of the 8th International Conference on Clean Steel. p. 1-11

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  150. Published

    Determination of Decisive Factors Influencing the Inclusion Landscape in Electroslag Remelted Ingots

    Michelic, S., Tanzer, R., Schützenhöfer, W. & Bernhard, C., 2012, Proceedings of the 1st International Conference on Ingot Casting, Rolling and Forging. p. 1-10

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  151. Published

    Effect of titanium on the solidification and post-solidification microstructure of high-strength steel welds: IIW Doc. II-C-435-11

    Vanovsek, W., Bernhard, C., Fiedler, M. & Schnitzer, R., 2012

    Research output: Non-textual form › Web publication/site › Research

  152. Published

    Experimental investigation into the influence of Ti on the clogging of ULC steels in continuous casting

    Bernhard, C., Xia, G., Egger, M., Pissenberger, A. & Michelic, S., 2012, Proceedings of the AISTech 2012. p. 2191-2200

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  153. Published

    Experimental investigations into surface crack formation under continuous casting conditions

    Krajewski, P., Pierer, R., Bernhard, C., Schaden, T. & Ilie, S., 2012, 5th International Congress on the Science and Technology of Steelmaking. p. Paper-1332

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  154. Published

    Experimental study on the influence of the Ti/Al ratio and different addition practices on the inclusion landscape in ULC steels

    Michelic, S., Xia, G. & Bernhard, C., 2012, Proceedings of the ASIA Steel International Conference 2012. p. 1-6

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  155. Published

    Identification of defect prone peritectic steel grades by analyzing the high temperature phase transformations

    Presoly, P., Pierer, R. & Bernhard, C., 2012, Defects and Properties of Cast Metals - Solidification Structure and Segregation. p. 299-306

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  156. Published

    In-situ quantification of micro-segregation that occurs during the solidification of steel

    Griesser, S., Reid, M., Pierer, R., Bernhard, C. & Dippenaar, R., 2012, 5th International Conference on the Science and Technology of Steelmaking. p. Paper-1143

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  157. Published

    Investigation of Alumina Wetting Fe-Ti, Fe-P and Fe-Ti-P Alloys

    Karasangabo, A. & Bernhard, C., 2012, In: Journal of adhesion science and technology. 26, p. 1141-1156

    Research output: Contribution to journal › Article › Research › peer-review

  158. Published

    Linking up of HT-LSCM and DSC measurements to characterize phase diagrams of steels

    Presoly, P., Pierer, R. & Bernhard, C., 2012, IOP Confernece Series (MCWASP XIII) - Materials Science and Engineering. p. 012064-012065

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  159. Published

    Linking up of HT-LSCM and DSC measurements to characterize phase diagrams of steels

    Presoly, P., Pierer, R. & Bernhard, C., 2012.

    Research output: Contribution to conference › Poster › Research › peer-review

  160. Published

    Near surface austenite grain growth in different casting processes for steel: Experiments and modeling

    Bernhard, C., Bragin, S. & Vanovsek, W., 2012, ICS 2012. p. Paper-296

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  161. Published

    The importance of solidification structure with respect to hot tearing during continuous casting of steels

    Pierer, R., Rauter, W. & Bernhard, C., 2012, TMS 2012. p. 251-258

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  162. Published

    Thermomechanical processing of low-carbon steels on Arvedi endless strip production lines: Modelling and plant results

    Bragin, S., Bernhard, C., Linzer, B., Rimnac, A., Guindani, A. & Venturini, R., 2012, TMP2012 - 4th International Conference on Thermomechanical Processing of Steel. p. Session 9-Paper 1

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  163. Published

    Welding procedure for high strength welds and their microstructural evolution during solidification and cooling: IIW Doc. II-C-436-11

    Vanovsek, W., Schnitzer, R., Schlagradl, T., Schneider, R., Posch, G., Schider, S., Bernhard, C., Leitner, H., Rauch, R., Fiedler, M. & Stoschka, M., 2012

    Research output: Non-textual form › Web publication/site › Research

  164. 2011
  165. Published

    A Study about the Influence of Carbon Content in the Steel on the Casting Behavior

    Xia, G., Bernhard, C., Ilie, S. & Fürst, C., 2011, In: Steel research international. 82, p. 230-236

    Research output: Contribution to journal › Article › Research › peer-review

  166. Published

    Development, implementation and verification of a transient numeric solidification model of a continuous bloom caster at Voestalpine Stahl Donawitz

    Michelic, S., Bernhard, C., Rauter, W., Erker, M., Brandl, W. & Sormann, A., 2011, 7th European Continuous Casting Conference. p. Paper-02

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  167. Published

    Erste Ergebnisse des neuen Hochtemperatur-Konfokalmikroskops am Lehrstuhl für Metallurgie

    Bernhard, C., Schider, S., Sormann, A., Xia, G. & Ilie, S., 2011, In: Berg- und hüttenmännische Monatshefte : BHM. 156, p. 161-167

    Research output: Contribution to journal › Article › Research › peer-review

  168. Published

    Experimental methods to characterise new steel grades by means of thermal analysis

    Presoly, P., Pierer, R. & Bernhard, C., 2011.

    Research output: Contribution to conference › Poster › Research › peer-review

  169. Published

    Influence of alloying additions on the morphology of non-metallic inclusions in high-strength steel welds: II-1776-11;II-C-421-11

    Vanovsek, W., Bernhard, C., Fiedler, M. & Posch, G., 2011

    Research output: Non-textual form › Web publication/site › Transfer

  170. Published

    Interactions of non-metallic inclusions with steel and slag: Thermodynamic modeling, experiments and metallographic analyses

    Michelic, S., Hartl, M. & Bernhard, C., 2011, EPD Congress 2011. p. 723-730

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  171. Published

    Investigating the influence of Ti and P on the clogging of ULC steels in the continuous casting process

    Bernhard, C., Xia, G., Karasangabo, A., Egger, M. & Pissenberger, A., 2011, 7th European Continuous Casting Conference. p. Paper -17

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  172. Published

    Measuring mechanical behavior of steel during solidification: Modeling the SSCC test

    Rowan, M., Thomas, B., Pierer, R. & Bernhard, C., 2011, In: Metallurgical and Materials Transactions B: Process Metallurgy and Materials Processing Science. 42, 4, p. 837-851

    Research output: Contribution to journal › Article › Research › peer-review

  173. Published

    Modification of non-metallic inclusions in the ESR process by steel-slag interaction: Thermodynamic and experimental considerations

    Michelic, S., Tanzer, R., Schützenhöfer, W. & Bernhard, C., 2011, Proceedings of the 2011 International Symposium on Liquid Metal Processing and Casting. p. 81-88

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  174. Published

    On the Representativeness of Automated SEM/EDS Analyses for Inclusion Characterisation with Special Regard to the Measured Sample Area

    Michelic, S., Wieser, G. & Bernhard, C., 2011, In: ISIJ international. 51, p. 769-775

    Research output: Contribution to journal › Article › Research › peer-review

  175. Published

    The formation of hot tear segregations in the continuous casting process

    Ilie, S., Reisinger, P., Bernhard, C. & Pierer, R., 2011, 3rd Chinese-German Metallurgy Seminar on Fundamentals of Iron and Steelmaking. p. Paper-10

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  176. Published

    Thermodynamic and Experimental Study on the Modification of Nonmetallic Inclusions Through the Contact with CaO-Al2O3-MgO Slags

    Michelic, S., Bernhard, C. & Hartl, M., 2011, AIST Proceedings 2011. p. 617-626

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  177. Published

    Thermo-Mechanical Properties of an Fe–Mn–Si–Cr–Ni–VC Shape Memory Alloy with Low Transformation Temperature

    Leinenbach, C., Kramer, H., Bernhard, C. & Eifler, D., 2011, In: Advanced Engineering Materials.

    Research output: Contribution to journal › Article › Research › peer-review

  178. 2010
  179. Published

    Verfahren zur Herstellung von hochfestem, niedrig legiertem Stahl

    Arth, G. (Inventor), Bernhard, C. (Inventor), Eckerstorfer, G. (Inventor), Hohenbichler, G. (Inventor) & Linzer, B. (Inventor), 2 Dec 2010, Patent No. 10193403.2-2122

    Research output: Patent

  180. Published

    The working group "continuous casting: Metallurgy and materials (M2CC)" at Leoben University, Austria

    Bernhard, C., Pierer, R. & Michelic, S. C., 1 Dec 2010, AISTech 2010 - Proceedings of the Iron and Steel Technology Conference. p. 977-986 10 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  181. Published

    ARVEDI ESP – REAL ENDLESS STRIP PRODUCTION: THE NEXT GENERATION OF PRODUCING HIGH-VALUE STEELS STARTED UP

    Bernhard, C., Bragin, S., Gelder, S., Linzer, B., Jungbauer, A., Venturini, R. & Guindani, A., 2010, ARVEDI ESP – REAL ENDLESS STRIP PRODUCTION: THE NEXT GENERATION OF PRODUCING HIGH-VALUE STEELS STARTED UP. p. ---

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  182. Published

    EINFLUSS DER STRECKENENERGIE UND SCHWEISZGESCHWINDIGKEIT AUF DAS ERSTARRUNGSVERHALTEN VON HÖCHSTFESTEN MAG UND MAG-FD NÄHTEN

    Vanovsek, W., Strauss, C. & Bernhard, C., 2010, join-ex 2010: Zusatzwerkstoffe und Gase. p. 15-21

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  183. Published

    Kombinierter Einsatz analytischer und statistischer Methoden zur quantitativen und qualitativen Bestimmung des Reinheitsgrads von Stählen

    Michelic, S., Hartl, M., Wieser, G. & Bernhard, C., 2010, Kombinierter Einsatz analytischer und statistischer Methoden zur quantitativen und qualitativen Bestimmung des Reinheitsgrads von Stählen. Werkstoff-Informationsges., p. 359-364

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  184. Published

    Metallurgische Einflüsse auf die Umformbarkeit von Stählen

    Buchmayr, B. & Bernhard, C., 2010, XXIX. Verformungskundliches Kolloquium. p. 5-11

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  185. Published

    Polydimensional modelling of dendritic growth and microsegregation in multicomponent alloys

    Michelic, S., Thuswaldner, J. & Bernhard, C., 2010, In: Acta materialia. 58, p. 2738-2751

    Research output: Contribution to journal › Article › Research › peer-review

  186. Published

    The Nature of Internal Defects in Continuously Cast Steel and their Impact on Final Product Quality

    Pierer, R. & Bernhard, C., 2010, AIST Proceedings 2010. p. 193-203

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  187. Published

    Thermodynamic Description of the System Steel-Slag-Inclusion for Different Metallurgical Processes using FactSage

    Michelic, S., Hartl, M. & Bernhard, C., 2010.

    Research output: Contribution to conference › Poster › Research › peer-review

  188. Published

    The Working Group "Continuous Casting: Metallurgy and Materials" (M²CC) at Leoben University

    Bernhard, C., Pierer, R. & Michelic, S., 2010, Proceedings of the AISTech 2010. p. 01-08

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  189. Published

    Über die Bildung von Heißrissseigerungen in Stahl: Vergleichende Untersuchungen an Stranggussbrammen und Laborversuchsproben

    Reiter, J., Pierer, R., Ilie, S., Presslinger, H., Fluch, J. & Bernhard, C., 2010, In: Berg- und hüttenmännische Monatshefte : BHM. p. 129-135

    Research output: Contribution to journal › Article › Research › peer-review

  190. 2009
  191. Published

    Die Stranggießforschung am Lehrstuhl für Metallurgie: Entwicklung, Status und Ausblick

    Bernhard, C., 2009, In: Berg- und hüttenmännische Monatshefte : BHM. 154, p. 20-26

    Research output: Contribution to journal › Article › Research › peer-review

  192. Published

    Experimental Simulation of the Solidification of Steel at Higher Cooling Rate

    Linzer, B., Hohenbichler, G., Bragin, S., Arth, G. & Bernhard, C., 2009, 3rd International Conference on Simulation and Modelling of Metallurgical Processes in Steelmaking (Steelsim 2009). p. Paper -CC17

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  193. Published

    Experimental Simulation of the Solidification of Steel at Higher Cooling Rates

    Linzer, B., Hohenbichler, G., Bragin, S., Arth, G. & Bernhard, C., 2009, In: Berg- und hüttenmännische Monatshefte : BHM. 154, p. 498-503

    Research output: Contribution to journal › Article › Research › peer-review

  194. Published

    Metallurgische Herausforderungen neuer Legierungskonzepte am Beispiel von Induced Plasticity (IP)-Stählen

    Wiener, J., Gigacher, G., Penz, S. & Bernhard, C., 2009, In: Berg- und hüttenmännische Monatshefte : BHM. 154, p. 33-39

    Research output: Contribution to journal › Article › Research › peer-review

  195. Published

    Modelling Solidification in Continuous Casting: Algorithms and Boundary Conditions

    Michelic, S., Bernhard, C., Rauter, W., Erker, M. & Sormann, A., 2009, Modelling Solidification in Continuous Casting: Algorithms and Boundary Conditions. ASMET, p. 1-8

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  196. Published

    Über die Bildung von Heißrissseigerungen in Stahl: Metallographische Analyse und Charakterisierung

    Pierer, R., Griesser, S., Reiter, J. & Bernhard, C., 2009, In: Berg- und hüttenmännische Monatshefte : BHM. 154, p. 346-353

    Research output: Contribution to journal › Article › Research › peer-review

  197. 2008
  198. Published

    Verfahren zur Herstellung eines Stahlbandes

    Bernhard, C. (Inventor), Eckerstorfer, G. (Inventor), Hohenbichler, G. (Inventor) & Linzer, B. (Inventor), 15 Oct 2008, Patent No. A 1593/2006

    Research output: Patent

  199. Published

    A model for predicting the austenite grain size at the surface of continuously cast slabs

    Bernhard, C., Reiter, J. & Presslinger, H., 2008, In: Metallurgical and Materials Transactions B: Process Metallurgy and Materials Processing Science. 39, p. 885-895

    Research output: Contribution to journal › Article › Research › peer-review

  200. Published

    Austenite grain size in the continuous casting process: Metallographic methods and evaluation

    Reiter, J., Bernhard, C. & Presslinger, H., 2008, In: Materials characterization. 59, p. 737-746

    Research output: Contribution to journal › Article › Research › peer-review

  201. Published

    Characterization of hot tear segregations in continuous casting of slabs

    Ilie, S., Reiter, J., Presslinger, H., Fluch, J. & Bernhard, C., 2008, 6th European Conference on Continuous Casting 2008. p. -Paper -122

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  202. Published

    Heat Transfer in a Round CC Mould: Measurement, Modelling and Validation

    Michelic, S., Rauter, W., Erker, M., Brandl, W. & Bernhard, C., 2008, 6th European Continuous Casting Conference. Associazione Italiana di Metallurgia, p. Paper-30

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  203. Published

    On the influence of carbon on secondary dendrite arm spacing in steel

    Pierer, R. & Bernhard, C., 2008, In: Journal of materials science. p. 6938-6943

    Research output: Contribution to journal › Article › Research › peer-review

  204. Published

    On the Interrelation of Heat Withdrawal and Crack Formation in the Continuous Casting Mould

    Michelic, S., Bernhard, C., Rauter, W. & Sormann, A., 2008, ICASP-2 Second International Conference on Advances in Solidification Processes. ASMET, p. 7-7

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  205. Published

    The newly developed In-situ Material Characterization (IMC-) test: installation, start-up and first results

    Tubikanec, A., Chimani, C. & Bernhard, C., 2008, Proceedings of the 6th European Continuous Casting Conference. 12 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  206. Published

    Über den Zusammenhang zwischen Primärstruktur und erstarrungsbedingten Fehlern am Beispiel der Heißrissbildung beim Stranggießen

    Reiter, J., Ilie, S., Pierer, R. & Bernhard, C., 2008, Fortschritte in der Metallographie. p. 185-190

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  207. Published

    Why are some peritectic steels susceptible to surface crack formation in continuous slab casting?

    Xia, G., Bernhard, C., Ilie, S. & Fürst, C., 2008, Proceedings of the 6th European Continuous Casting Conference. p. Paper-22

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  208. 2007
  209. Published

    A Contribution to Hot Tearing in the Continuous Casting Process

    Pierer, R., Bernhard, C. & Chimani, C., 2007, In: Revue de métallurgie (Cahiers d'informations techniques : CIT). p. 72-83

    Research output: Contribution to journal › Article › Research › peer-review

  210. Published

    A Hot Tearing Criterion for the Continuous Casting Process

    Pierer, R., Michelic, S., Bernhard, C. & Chimani, C., 2007, A Hot Tearing Criterion for the Continuous Casting Process. Steel Institute VDEh, p. 893-900

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  211. Published

    Determination of the nature of liquid steel - alumina interfacial interactions from sessile drop measurements: cases of Fe-Ti and Fe-P alloys

    Bernhard, C., Karasangabo, A., Presslinger, H. & Reisinger, P., 2007, Proceedings of the Chinese - European Exchange in Duesseldorf. p. 219-232

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  212. Published

    Experimental Simulation of Defect Formation in the Continuous Casting Process

    Bernhard, C., Pierer, R., Tubikanec, A. & Chimani, C., 2007, SMEA Conference on the Effect of Melting, Refining and Casting on Product Quality and Properties. p. Session II-Paper 2

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  213. Published

    Numeric Modelling of the Heat Transfer in the Continuous Casting Mould

    Michelic, S., Bernhard, C. & Pierer, R., 2007, Numeric Modelling of the Heat Transfer in the Continuous Casting Mould. p. 209-215

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  214. Published

    Simulation of austenite grain growth in continuous casting

    Bernhard, C., Reiter, J. & Presslinger, H., 2007, AISTEch2007. p. 1-10

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  215. Published

    Über Zusammenhang zwischen Prozess und Produktqualität beim Stranggießen von Stahl am Beispiel der Heißrissbildung

    Bernhard, C., 2007

    Research output: Thesis › Habilitation thesis › peer-review

  216. 2006
  217. Published

    A Contribution to Hot Tearing in the Continuous Casting Process

    Pierer, R., Bernhard, C. & Chimani, C., 2006, International ATS Steelmaking Conference. Ed. de la Revue de Métallurgie, p. 1-3

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  218. Published

    Assessment of the Primary Structure of Slabs and the Influence on Hot- and Cold-Rolled Strip Structure

    Presslinger, H., Mayr, M., Tragl, E. & Bernhard, C., 2006, In: Steel research international. 77, p. 107-115

    Research output: Contribution to journal › Article › Research › peer-review

  219. Published

    Determination and Prediction of Austenite Grain Size in Relation to Product Quality of the Continuous Casting Process

    Reiter, J., Bernhard, C. & Presslinger, H., 2006, Determination and Prediction of Austenite Grain Size in Relation to Product Quality of the Continuous Casting Process. p. 805-816

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  220. Published

    Die interaktive Stranggießsimulation auf www.steeluniversity.org

    Bernhard, C. & Sjökvist, T., 2006, In: Berg- und hüttenmännische Monatshefte : BHM. 151, p. 189-195

    Research output: Contribution to journal › Article › Research › peer-review

  221. Published

    Einfluss der Prozessparameter auf die Erstarrung im VLBO-Prozess

    Zinner, S., Reiter, G., Bernhard, C., Schützenhöfer, W. & Rabitsch, R., 2006, Einfluss der Prozessparameter auf die Erstarrung im VLBO-Prozess. ASMET, p. 1-2

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  222. Published

    High Temperature Behavior during Solidification of Peritectic Steels under Continuous Casting Conditions

    Pierer, R. & Bernhard, C., 2006, High Temperature Behavior during Solidification of Peritectic Steels under Continuous Casting Conditions. p. 793-803

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  223. Published

    Influence of alloying elements on the thermal contraction of peritectic steels during initial solidification

    Bernhard, C. & Xia, G., 2006, In: Ironmaking and steelmaking. 33, p. 52-56

    Research output: Contribution to journal › Article › Research › peer-review

  224. Published

    Lehrstuhl für Metallurgie

    Krieger, W., Bernhard, C., Korp, J., Hasenhündl, R. & Wiener, J., 2006, In: Berg- und hüttenmännische Monatshefte : BHM. 151, p. 288-291

    Research output: Contribution to journal › Article › Research › peer-review

  225. Published

    Metallurgical Aspects of Casting High-Manganese Steel Grades

    Gigacher, G., Pierer, R., Wiener, J. & Bernhard, C., 2006, In: Advanced Engineering Materials. 8, p. 1096-1100

    Research output: Contribution to journal › Article › Research › peer-review

  226. Published

    Methods for assessments of slab centre segregation as a tool to control slab continuous casting with soft reduction

    Presslinger, H., Ilie, S., Schiefermüller, A., Pissenberger, A., Parteder, E. & Bernhard, C., 2006, In: ISIJ international. 46, p. 1845-1851

    Research output: Contribution to journal › Article › Research › peer-review

  227. Published

    Modelling and experiments on kinetics of atmosphere purification by Argon purging in a high-temperature apparatus

    Anghelina, D., Karasangabo, A. & Bernhard, C., 2006, Proceedings of the CMFF'06. University of Technology and Economics, p. 1-3

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  228. Published

    Steeluniversity.org – An Interactive E-Learning Resource on Steel Processing Technologies

    Michelic, S. & Bernhard, C., 2006, Proceedings des 13. Internationalen Studententags der Metallurgie. ASMET, p. 117-127

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  229. Published

    Why are some peritectic steels susceptible to surface crack formation for the continuously cast slab

    Xia, G., Bernhard, C., Fuerst, C. & Ilie, S., 2006, Proceedings of the Conference on Surface Quality of Continuously Cast Semis. p. 1-4

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  230. 2005
  231. Published

    Verfahren zur Ermittlung von mechanischen Eigenschaften von Werkstoffen sowie Vorrichtung hierzu

    Bernhard, C. (Inventor), Chimani, C. (Inventor) & Tubikanec, A. (Inventor), 15 Dec 2005, Patent No. A852/2004

    Research output: Patent

  232. Published

    Evaluation of common constitutive equations for solidifying steel

    Pierer, R., Bernhard, C. & Chimani, C., May 2005, In: Berg- und hüttenmännische Monatshefte : BHM. 150.2005, 5, p. 163-169 7 p.

    Research output: Contribution to journal › Article › Research › peer-review

  233. Published

    Forschungsarbeiten am Lehrstuhl für Metallurgie der Montanuniversität Leoben

    Krieger, W., Bernhard, C., Gigacher, G., Korp, J. & Plaul, J. F., 2005, In: Berg- und hüttenmännische Monatshefte : BHM. p. 399-407

    Research output: Contribution to journal › Article › Research › peer-review

  234. Published

    High Temperature properties and the crack susceptibility of new steel grades for automotive purposes

    Gigacher, G., Pierer, R. & Bernhard, C., 2005, Proc. Computational Methods and Experimental Measurements in Material Characterisation. p. 1-5

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  235. 2004
  236. Published

    Anforderungen an prozessorientierte Heißrissbildungsmodelle.

    Bernhard, C., 2004, In: Berg- und hüttenmännische Monatshefte : BHM. 149, p. 90-95

    Research output: Contribution to journal › Article › Research › peer-review

  237. Published

    Bestimmung und Bedeutung der Randbedingungen für die Simulation von Stranggießprozessen.

    Lechner, M., Reiter, J., Bernhard, C., Forsthuber, M. & Zach, O., 2004, In: Berg- und hüttenmännische Monatshefte : BHM. 149, p. 101-106

    Research output: Contribution to journal › Article › Research › peer-review

  238. Published

    Castability of Steels: Influence of the Interfacial Properties on the Continuous Casting Process.

    Karasangabo, A. & Bernhard, C., 2004, In: Berg- und hüttenmännische Monatshefte : BHM. 149, p. 83-89

    Research output: Contribution to journal › Article › Research › peer-review

  239. Published

    Common hot tearing criteria and experimental validation

    Pierer, R., Bernhard, C. & Chimani, C., 2004, In: Berg- und hüttenmännische Monatshefte : BHM. 149, p. 95-101

    Research output: Contribution to journal › Article › Research › peer-review

  240. Published

    Eigenschaften hochmanganhaltiger Stähle unter stranggießähnlichen Beanspruchungen.

    Gigacher, G., Bernhard, C. & Krieger, W., 2004, In: Berg- und hüttenmännische Monatshefte : BHM. 149, p. 112-117

    Research output: Contribution to journal › Article › Research › peer-review

  241. Published

    Einsatz moderner Messtechnik zur Beurteilung der Erstarrungsvorgänge beim Stranggießen.

    Forsthuber, M., Rauter, W., Doringer, E., Bernhard, C. & Chimani, C., 2004, In: Berg- und hüttenmännische Monatshefte : BHM. 149, p. 77-83

    Research output: Contribution to journal › Article › Research › peer-review

  242. Published

    Experimentelle Simulation von gegossenen Dünnbändern.

    Linzer, B., Bernhard, C. & Hohenbichler, G., 2004, In: Berg- und hüttenmännische Monatshefte : BHM. 149, p. 107-111

    Research output: Contribution to journal › Article › Research › peer-review

  243. 2003
  244. Published

    Herstellung und Vergießbarkeit moderner Stähle für den Automobilbau

    Gigacher, G., Bernhard, C. & Krieger, W., 2003, In: Berg- und hüttenmännische Monatshefte : BHM. 148, p. 460-465

    Research output: Contribution to journal › Article › Research › peer-review

  245. 2002
  246. Published

    High Speed Casting versus Shell Strength.

    Bernhard, C., Wolf, M. & Hiebler, H., 2002, In: Berg- und hüttenmännische Monatshefte : BHM. 147, p. 43-47

    Research output: Contribution to journal › Article › Research › peer-review

  247. 2000
  248. Published

    How fast can we cast?

    Bernhard, C., Hiebler, H. & Wolf, M. M., 1 Dec 2000, In: Ironmaking and steelmaking. 27, 6, p. 450-454 5 p.

    Research output: Contribution to journal › Article › Research › peer-review

  249. Published

    Experimental simulation of subsurface crack formation in continuous casting

    Bernhard, C., Hiebler, H. & Wolf, M. M., 1 Jan 2000, In: Revue de Metallurgie. Cahiers D'Informations Techniques. 97, 3, p. 333-344 12 p.

    Research output: Contribution to journal › Article › Research › peer-review

  250. 1999
  251. Published

    Mechanical properties and crack susceptibility of steel during solidification

    Hiebler, H. & Bernhard, C., 1 Jan 1999, In: Steel Research. 70.1999, 8-9, p. 349-355 7 p.

    Research output: Contribution to journal › Article › Research › peer-review

  252. 1996
  253. Published

    Simulation of shell strength properties by the SSCT test

    Bernhard, C., Hiebler, H. & Wolf, M. M., 1 Dec 1996, In: ISIJ international. 36, SUPPL.

    Research output: Contribution to journal › Article › Research › peer-review

View graph of relations

Contact

Phone: 2220

Latest Research Output

View more (229)