Anton Hohenwarter

51 - 100 out of 159Page size: 50

Publications / Theses

  1. 2017
  2. Published

    Insights into the deformation behavior of the CrMnFeCoNi high-entropy alloy revealed by elevated temperature nanoindentation

    Maier-Kiener, V., Schuh, B., George, E., Clemens, H. & Hohenwarter, A., 2017, In: Journal of materials research (JMR). 32, 14, p. 2658-2667

    Research output: Contribution to journal › Article › Research › peer-review

  3. Published

    Intrinsic behaviour of mode II and mode III long fatigue cracks in zirconium and the Ti-6Al-4V alloy

    Vojtek, T., Pokluda, J., Hohenwarter, A. & Pippan, R., 2017, Materials Structure and Micromechanics of Fracture VIII. Vol. 258 SSP. p. 265-268 4 p. (Solid State Phenomena; vol. 258 SSP).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  4. Published

    Nanoindentation testing as a powerful screening tool for assessing phase stability of nanocrystalline high-entropy alloys

    Maier-Kiener, V., Schuh, B., George, E., Clemens, H. & Hohenwarter, A., 2017, In: Materials and Design. 115, p. 479-485 7 p.

    Research output: Contribution to journal › Article › Research › peer-review

  5. 2016
  6. Published

    Nanoindentation testing as a tool for assessing the microstructure-property relationship of ultrafine grained and single crystalline HEAs

    Maier-Kiener, V., Schuh, B., George, E., Clemens, H. & Hohenwarter, A., 29 Dec 2016.

    Research output: Contribution to conference › Presentation › Research

  7. Published

    Experimental evidence of a common local mode II growth mechanism of fatigue cracks loaded in modes II, III and II + III in niobium and titanium

    Vojtek, T., Hohenwarter, A., Pippan, R. & Pokluda, J., 1 Nov 2016, In: International Journal of Fatigue. 92, p. 470-477 8 p.

    Research output: Contribution to journal › Article › Research › peer-review

  8. Published

    Prediction of effective mode II fatigue crack growth threshold for metallic materials

    Vojtek, T., Pippan, R., Hohenwarter, A. & Pokluda, J., 16 Sept 2016, In: Engineering Fracture Mechanics. 174.2017, 1 April, p. 117-126 10 p.

    Research output: Contribution to journal › Article › Research › peer-review

  9. Published

    Ultra-strong and damage tolerant metallic bulk materials: A lesson from nanostructured pearlitic steel wires

    Hohenwarter, A., Völker, B., Kapp, M. W., Li, Y., Goto, S., Raabe, D. & Pippan, R., 14 Sept 2016, In: Scientific reports (London : Nature Publishing Group). 6, 33228.

    Research output: Contribution to journal › Article › Research › peer-review

  10. Published

    Phase decomposition of a nanocrystalline AlNbTiV high-entropy alloy

    Schuh, B., Völker, B., Todt, J., Hohenwarter, A., Maier-Kiener, V. & Li, J., 5 Aug 2016.

    Research output: Contribution to conference › Presentation › Research

  11. Published

    Direct measurement of vacancy relaxation by dilatometry

    Kotzurek, J. A., Steyskal, E. M., Oberdorfer, B., Hohenwarter, A., Pippan, R., Sprengel, W. & Würschum, R., 11 Jul 2016, In: Applied physics letters. 109, 2, 021906.

    Research output: Contribution to journal › Article › Research › peer-review

  12. Published

    The Influence of Grain Size on the Fatigue Crack Growth of Ultrafine-grained Metals

    Leitner, T., Hohenwarter, A. & Pippan, R., 28 Jun 2016.

    Research output: Contribution to conference › Presentation › Research › peer-review

  13. Published

    A comparison of the fatigue crack growth behavior of pure ultrafine-grained metals

    Leitner, T., Hohenwarter, A. & Pippan, R., 22 Jun 2016.

    Research output: Contribution to conference › Presentation › Research › peer-review

  14. Published

    Near-threshold fatigue crack growth behavior of ultrafine-grained metals

    Leitner, T., Hohenwarter, A. & Pippan, R., 3 Jun 2016.

    Research output: Contribution to conference › Presentation › Research › peer-review

  15. Published

    Microstructural and mechanical comparison of Ti and Ti-alloys after severe plastic deformation

    Völker, B., Jäger, N., Wurster, S., Hohenwarter, A. & Pippan, R., 2 Jun 2016.

    Research output: Contribution to conference › Presentation › Research

  16. Published

    Der Risswiderstand von ultrafeinkörnigen Metallen unter zyklischer Belastung

    Leitner, T., Hohenwarter, A. & Pippan, R., 13 Apr 2016.

    Research output: Contribution to conference › Presentation › Research › peer-review

  17. Published

    The importance of fracture toughness in ultrafine and nanocrystalline bulk materials

    Pippan, R. & Hohenwarter, A., 12 Apr 2016, In: Materials Research Letters [Elektronische Ressource]. 4, 3, p. 1-10

    Research output: Contribution to journal › Article › Research › peer-review

  18. Published

    Revisiting Fatigue Crack Growth in UFG Ni and Fe

    Leitner, T., Hohenwarter, A. & Pippan, R., 22 Mar 2016.

    Research output: Contribution to conference › Presentation › Research › peer-review

  19. Published

    Anisotropic deformation characteristics of an ultrafine- and nanolamellar pearlitic steel

    Kapp, M. W., Hohenwarter, A., Wurster, S., Yang, B. & Pippan, R., 1 Mar 2016, In: Acta materialia. 106, p. 239-248 10 p.

    Research output: Contribution to journal › Article › Research › peer-review

  20. Published

    Mechanical properties of pure titanium and a Nb-containing titanium alloy: A comparative study

    Völker, B., Jäger, N., Wurster, S., Hohenwarter, A., Zehetbauer, M. J. & Pippan, R., 18 Feb 2016.

    Research output: Contribution to conference › Presentation › Research

  21. Published

    Revisiting Fatigue Crack Growth in UFG metals

    Leitner, T., Hohenwarter, A. & Pippan, R., 17 Feb 2016.

    Research output: Contribution to conference › Presentation › Research › peer-review

  22. Published

    Microstructural stability of a single-phase nanocrystalline CoCrFeMnNi high-entropy alloy

    Schuh, B., Hohenwarter, A., Maier-Kiener, V., Clemens, H., Völker, B., Mendez Martin, F. & George, E., 15 Feb 2016.

    Research output: Contribution to conference › Presentation › Research

  23. Published

    Thermally Activated Deformation Processes in Body-Centered Cubic Cr – How Microstructure Influences Strain-Rate Sensitivity

    Maier-Kiener, V., Kiener, D., Pippan, R. & Hohenwarter, A., 15 Feb 2016.

    Research output: Contribution to conference › Presentation › Research

  24. Published

    Microstrucural Investigations of a nanocrystalline CoCrNi alloy

    Schuh, B., Hohenwarter, A., Mendez Martin, F., Völker, B. & Maier-Kiener, V., 6 Feb 2016.

    Research output: Contribution to conference › Poster › Research

  25. Published

    Microstructure and metallic ion release of pure titanium and Ti-13Nb-13Zr alloy processed by high pressure torsion

    Dimić, I., Cvijović-Alagić, I., Völker, B., Hohenwarter, A., Pippan, R., Veljović, D., Rakin, M. & Bugarski, B., 5 Feb 2016, In: Materials & design. 91, p. 340-347 8 p.

    Research output: Contribution to journal › Article › Research › peer-review

  26. Published

    Exceptional damage-tolerance of a medium-entropy alloy CrCoNi at cryogenic temperatures

    Gludovatz, B., Hohenwarter, A., Thurston, K. V. S., Bei, H., Wu, Z., George, E. P. & Ritchie, R. O., 2 Feb 2016, In: Nature Communications. 7, 10602.

    Research output: Contribution to journal › Article › Research › peer-review

  27. Published

    Deformation and fracture characteristics of ultrafine-grained vanadium

    Hohenwarter, A. & Wurster, S., 2016, In: Materials science and engineering: A, Structural materials: properties, microstructure and processing. 650, p. 492-496 5 p.

    Research output: Contribution to journal › Article › Research › peer-review

  28. Published

    Fracture of Severely Plastically Deformed Metals

    Hohenwarter, A., Pippan, R., Völker, B., Kapp, M. W., Kammerhofer, C. & Leitner, T., 2016.

    Research output: Contribution to conference › Presentation › Research › peer-review

  29. Published

    Fracture of Severely Plastically Deformed Niobium and Tantalum

    Hohenwarter, A., 2016.

    Research output: Contribution to conference › Presentation › Research › peer-review

  30. Published

    Fracture of ultrafine-grained and nanocrystalline materials

    Hohenwarter, A., Völker, B., Leitner, T. & Kapp, M. W., 2016.

    Research output: Contribution to conference › Presentation › Research

  31. Published

    Mechanical properties of severely plastically deformed niobium and tantalum

    Hohenwarter, A., 2016.

    Research output: Contribution to conference › Presentation › Research

  32. Published

    Microstructure and mechanical properties of a nanocrystalline AlNbTiV high-entropy alloy

    Schuh, B., Völker, B., Li, J., Maier, V., Pippan, R. & Hohenwarter, A., 2016.

    Research output: Contribution to conference › Presentation › Research › peer-review

  33. Published

    Nanoindentation testing as a tool for assessing the microstructure-property relationship of ultrafine grained and single crystalline HEAs

    Maier-Kiener, V., Schuh, B., George, E., Clemens, H. & Hohenwarter, A., 2016.

    Research output: Contribution to conference › Presentation › Research

  34. Published

    Nanokristalline High-Entropy Legierungen

    Hohenwarter, A., Schuh, B., Völker, B., Pippan, R., Maier-Kiener, V., Clemens, H. & George, E. P., 2016.

    Research output: Contribution to conference › Presentation › Research

  35. Published

    New advances in high pressure torsion processing

    Hohenwarter, A., Martin, R. & Pippan, R., 2016.

    Research output: Contribution to conference › Presentation › Research › peer-review

  36. 2015
  37. Published

    Tracking of Grain Boundary Movement Due to (Thermo-) Mechanical Deformation

    Wurster, S., Bigl, S., Renk, O., Cordill, M. J., Hohenwarter, A., Pippan, R. & Kiener, D., 24 Nov 2015.

    Research output: Contribution to conference › Presentation › Research

  38. Published

    Fatigue threshold of ultrafine-grained and nanocrystalline metals

    Leitner, T., Hohenwarter, A. & Pippan, R., 4 Nov 2015.

    Research output: Contribution to conference › Presentation › Research › peer-review

  39. Published

    Revisiting fatigue crack growth in various grain size regimes of Ni

    Leitner, T., Hohenwarter, A. & Pippan, R., 14 Oct 2015, In: Materials science and engineering: A, Structural materials: properties, microstructure and processing. 646, p. 294-305 12 p., 32705.

    Research output: Contribution to journal › Article › Research › peer-review

  40. Published

    Fracture behavior of high strength pearlitic steel wires

    Völker, B., Kapp, M. W., Pippan, R. & Hohenwarter, A., 5 Oct 2015.

    Research output: Contribution to conference › Poster › Research

  41. Published

    Progress in understanding of intrinsic resistance to shear-mode fatigue crack growth in metallic materials

    Vojtek, T., Pokluda, J., Hohenwarter, A. & Pippan, R., 4 Oct 2015, In: International Journal of Fatigue. 89, p. 36-42 7 p.

    Research output: Contribution to journal › Article › Research › peer-review

  42. Published

    Propagation of long fatigue cracks under remote modes II and III in ferritic-pearlitic steel

    Vojtek, T., Pokluda, J., Hohenwarter, A. & Pippan, R., 1 Oct 2015, In: Acta Physica Polonica A. 128, 4, p. 611-614 4 p.

    Research output: Contribution to journal › Article › Research › peer-review

  43. Published

    The influence of grain size on the fatigue crack growth of ultrafine-grained and nanocrystalline metals

    Leitner, T., Hohenwarter, A. & Pippan, R., 11 Aug 2015.

    Research output: Contribution to conference › Presentation › Research › peer-review

  44. Published

    Microstructure and chemistry evolution due to heat treatments after severe plastic deformation of a CrMnFeCoNi alloy

    Völker, B., Schuh, B. & Hohenwarter, A., 7 May 2015.

    Research output: Contribution to conference › Presentation › Research

  45. Published

    Einfluss der Korngröße auf des Rissfortschrittsverhalten von Nickel

    Leitner, T., Hohenwarter, A. & Pippan, R., 9 Apr 2015.

    Research output: Contribution to conference › Poster › Research › peer-review

  46. Published

    Microstructural investigations of a nanocrystalline high-entropy alloy

    Schuh, B., Hohenwarter, A., Mendez Martin, F., Clemens, H. & Pippan, R., 8 Apr 2015, p. 319.

    Research output: Contribution to conference › Poster › Research › peer-review

  47. Published

    Thermally activated deformation processes in body-centered cubic Cr - How microstructure influences strain-rate sensitivity

    Maier, V., Hohenwarter, A., Pippan, R. & Kiener, D., 31 Mar 2015, In: Scripta materialia. 106, p. 42-45 4 p.

    Research output: Contribution to journal › Article › Research › peer-review

  48. Published

    Electron Backscatter Diffraction – How to read this information on polycrystalline films

    Wurster, S., Bigl, S., Renk, O., Gludovatz, B., Hohenwarter, A., Motz, C., Kiener, D. & Pippan, R., 22 Jan 2015.

    Research output: Contribution to conference › Presentation › Research

  49. Published

    Fracture and fracture toughness of nanopolycrystalline metals produced by SPD

    Hohenwarter, A., Völker, B., Kapp, M. & Pippan, R., 2015.

    Research output: Contribution to conference › Presentation › Research

  50. Published

    Fracture in severely plastically deformed metals - How toughness can be improved

    Hohenwarter, A., Völker, B., Leitner, T., Renk, O. & Pippan, R., 2015.

    Research output: Contribution to conference › Presentation › Research › peer-review

  51. Published

    Fracture resistance of pearlitic steels

    Hohenwarter, A., Völker, B., Kapp, M. & Pippan, R., 2015.

    Research output: Contribution to conference › Presentation › Research

  52. Published

    Incremental high pressure torsion as a novel severe plastic deformation process: Processing features and application to copper

    Hohenwarter, A., 2015, In: Materials science and engineering: A, Structural materials: properties, microstructure and processing. 626, p. 80-85

    Research output: Contribution to journal › Article › Research › peer-review

  53. Published

    Mechanical properties, microstructure and thermal stability of a nanocrystalline CoCrFeMnNi high-entropy alloy after severe plastic deformation

    Schuh, B., Mendez Martin, F., Völker, B., George, E. P., Clemens, H., Pippan, R. & Hohenwarter, A., 2015, In: Acta materialia. 96, p. 258-268

    Research output: Contribution to journal › Article › Research › peer-review

Previous 1 2 3 4 Next
View graph of relations

Latest Research Output

View more (159)