Andreas Ludwig

1 - 476 out of 476Page size: 500

Sort by: Publication date

Publications / Theses

2021
Published
"Generation of Reverse Meniscus Flow by ApplyingAn Electromagnetic Brake"
Vakhrushev, A., Kharicha, A., Ludwig, A., Hackl, G., Eckert, S., Watzinger, J., Wu, M., Karimi Sibaki, E., Nitzl, G. & Tang, Y., Jul 2021, In: Journal of Mining and Metallurgy, Section B: Metallurgy.
Research output: Contribution to journal › Article › Research › peer-review
Published
Modelling melting and grain destruction phenomena during globular equiaxed solidification
Zhang, H., Wu, M., Ludwig, A., Kharicha, A., Gomes Rodrigues, C. & Schumacher, P., May 2021, In: Applied Mathematical Modelling. 2021
Research output: Contribution to journal › Article › Research › peer-review
Published
Hydrodynamically enhanced electrochemical mass transfer on the surface of an electrically conductive droplet
Kharicha, A., Karimi Sibaki, E., Vakhrushev, A., Wu, M., Ludwig, A. & Bohacek, J., 9 Apr 2021, In: International journal of heat and mass transfer. 2021, 4, 9 p.
Research output: Contribution to journal › Article › Research › peer-review
Accepted/In press
Directional Solidification of AlSi7Fe1 Alloy Under Forced Flow Conditions: Effect of Intermetallic Phase Precipitation and Dendrite Coarsening
Zhang, H., Wu, M., Rodrigues, C. M. G., Ludwig, A. & Kharicha, A., 2021, (Accepted/In press) In: Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science.
Research output: Contribution to journal › Article › Research › peer-review
Published
NUMERICAL SIMULATION OF BUILD-UP GROWTH COUPLED WITH HYDRODYNAMICS
Stefan-Kharicha, M., Kharicha, A., Reiss, G., Eßl, W., Mugrauer, C., Goodwin, F., Wu, M., Ludwig, A. & Zaidat, K., 2021.
Research output: Contribution to conference › Poster › Research › peer-review
Published
On Modelling Parasitic Solidification Due to Heat Loss at Submerged Entry Nozzle Region of Continuous Casting Mold
Vakhrushev, A., Kharicha, A., Wu, M., Tang, Y., Ludwig, A., Nitzl, G., Watzinger, J., Bohacek, J. & Hackl, G., 2021, In: Metals. 2021, 11/9
Research output: Contribution to journal › Article › Research › peer-review
2020
Published
Two-phase viscoplastic model for the simulation of twin roll casting
Rodrigues, C. M. G., Ludwig, A., Wu, M., Kharicha, A. & Vakhrushev, A., Dec 2020, In: Journal of materials processing technology. 286, 116814.
Research output: Contribution to journal › Article › Research › peer-review
Published
Flow-solidification interaction: A numerical study on solidification of NH₄Cl – 70 wt.%H₂O solution in a water-cooled mould with a large sample thickness
Wu, M., Stefan-Kharicha, M., Kharicha, A. & Ludwig, A., 15 Oct 2020, In: International journal of heat and mass transfer. 164.2021, January, 120566.
Research output: Contribution to journal › Article › Research › peer-review
Published
Numerical Simulation of Heat Treatment of Ti-6AI-4V by using a Phase-Field Method Based Software.
Mogeritsch, J., Panzl, G., Watzl, A. & Ludwig, A., 2 Oct 2020. 11 p.
Research output: Contribution to conference › Paper
Published
Geometrical effect on macrosegregation formation during unidirectional solidification of Al–Si alloy
Zhang, H., Wu, M., Tewari, S. N., Ludwig, A. & Kharicha, A., 24 Sept 2020, In: Journal of materials processing technology. 288.2021, February, 12 p., 116913.
Research output: Contribution to journal › Article › Research › peer-review
Published
Electric Current Distribution During Electromagnetic Braking in Continuous Casting
Vakhrushev, A., Kharicha, A., Liu, Z., Wu, M., Ludwig, A., Nitzl, G., Tang, Y., Hackl, G. & Watzinger, J., 2 Sept 2020, In: Metallurgical and Materials Transactions B: Process Metallurgy and Materials Processing Science. 51.2020, 6, p. 2811-2828 18 p.
Research output: Contribution to journal › Article › Research › peer-review
Published
Role of Solidification in Submerged Entry Nozzle Clogging During Continuous Casting of Steel
Barati, H., Wu, M., Kharicha, A. & Ludwig, A., 16 Jul 2020, In: Steel research international. 91.2020, 12, 9 p., 2000230.
Research output: Contribution to journal › Article › Research › peer-review
Published
Impact of hydrodynamics on growth and morphology of faceted crystals
Stefan-Kharicha, M., Kharicha, A., Zaidat, K., Reiss, G., Eßl, W., Goodwin, F., Wu, M., Ludwig, A. & Mugrauer, C., 1 Jul 2020, In: Journal of crystal growth. 541, July, 11 p., 125667.
Research output: Contribution to journal › Article › Research › peer-review
Published
Impact of crystal sedimentation and viscoplastic semi-solid dynamics on macrosegregation
Gomes Rodrigues, C., Ludwig, A. (Co-editor), Wu, M. (Co-editor), Kharicha, A. (Co-editor) & Vakhrushev, A. (Co-editor), Jun 2020, IOP Conf. Series: Mater.Sci.Eng.. Vol. 861.
Research output: Chapter in Book/Report/Conference proceeding › Other chapter contribution › Research
Published
Influence of crystal fragmentation on the formation of microstructure and macrosegregation during directional solidification under forced convection condition
Zhang, H., Wu, M. (Co-editor), Zhang, Z. (Co-editor), Ludwig, A. (Co-editor) & Kharicha, A. (Co-editor), Jun 2020, IOP conf. Series: Mater. Sci. Eng.. Vol. 861.
Research output: Chapter in Book/Report/Conference proceeding › Other chapter contribution › Research
Published
Modeling mixed columnar-equiaxed solificiation of Sn-10wt% alloy under forced convection driven by travelling magnetic stirring
Zhang, Z., Wu, M. (Co-editor), Zhang, H. (Co-editor), Karimi Sibaki, E. (Co-editor), Ludwig, A. (Co-editor) & Kharicha, A. (Co-editor), Jun 2020, IOP Conf. Series: Mater. Sci. Eng. . Vol. 861.
Research output: Chapter in Book/Report/Conference proceeding › Other chapter contribution › Research
Published
Modelling of shear bands during solidification
Ludwig, A., Gomes Rodrigues, C. (Co-editor), Wu, M. (Co-editor) & Kharicha, A. (Co-editor), Jun 2020, IOP Conf. Series: Mater. Sci.Eng. . online, Vol. 861.
Research output: Chapter in Book/Report/Conference proceeding › Other chapter contribution › Research
Published
Modelling viscoplastic behavior of solidifying shell under applied electromagnetic breaking during continuous casting
Vakhrushev, A., Kharicha, A. (Co-editor), Wu, M. (Co-editor), Ludwig, A. (Co-editor), Nitzl, G. (Co-editor), Tang, Y. (Co-editor), Hackl, G. (Co-editor), Watzinger, J. (Co-editor) & Gomes Rodrigues, C. (Co-editor), Jun 2020, IOP Conf. Series: mater. Sci. Eng.. Vol. 861.
Research output: Chapter in Book/Report/Conference proceeding › Other chapter contribution › Research
Published
A 2D Multiphase Model of Drop Behavior during Electroslag Remelting
Chaulet, J., Kharicha, A., Charmond, S., Dussoubs, B., Hans, S., Wu, M., Ludwig, A. & Jardy, A., 8 Apr 2020, In: Metals. 10.2020, 4, 16 p., 490.
Research output: Contribution to journal › Article › Research › peer-review
Published
Numerical study of the role of mush permeability in the solidifying mushy zone under forced convection
Zhang, H., Wu, M., Zheng, Y., Ludwig, A. & Kharicha, A., 1 Mar 2020, In: Materials Today Communications. 22.2020, March, 9 p., 100842.
Research output: Contribution to journal › Article › Research › peer-review
Published
Investigation of Peritectic Solidification Morphologies by Using the Binary Organic Model System TRIS-NPG
Mogeritsch, J., Abdi, M. & Ludwig, A., 21 Feb 2020, In: Materials. 13.2020, 4, 16 p., 966.
Research output: Contribution to journal › Article › Research › peer-review
Published
A Numerical Investigation on the Electrochemical Behavior of CaO and Al₂O₃ in the ESR Slags
Karimi-Sibaki, E., Kharicha, A., Wu, M., Ludwig, A. & Bohacek, J., 20 Feb 2020, In: Metallurgical and Materials Transactions B: Process Metallurgy and Materials Processing Science. 51.2020, 3, p. 871-879 9 p.
Research output: Contribution to journal › Article › Research › peer-review
E-pub ahead of print
A volume of fluid (VOF) method to model shape change during electrodeposition
Karimi Sibaki, E., Kharicha, A., Vakhrushev, A., Wu, M., Ludwig, A. & Bohacek, J., 31 Jan 2020, (E-pub ahead of print) In: Electrochemistry Communications. 112.2020, 106675.
Research output: Contribution to journal › Article › Research › peer-review
Published
Two-phase vicoplastic model for the simulation of twin roll casting
Gomes Rodrigues, C., Wu, M., Ludwig, A., Kharicha, A. & Vakhrushev, A., 2020, In: Journal of materials processing technology.
Research output: Contribution to journal › Article › Research › peer-review
2019
E-pub ahead of print
A Parametric Study of the Vacuum Arc Remelting (VAR) Process: Effects of Arc Radius, Side-Arcing, and Gas Cooling
Karimi-Sibaki, E., Kharicha, A., Wu, M., Ludwig, A. & Bohacek, J., 29 Oct 2019, (E-pub ahead of print) In: Metallurgical and Materials Transactions B: Process Metallurgy and Materials Processing Science. 51.2020, 1, p. 222-235 p 14 p.
Research output: Contribution to journal › Article › Research › peer-review
Published
Calibration of Numerical and Determination of Physical Parameters for the Organic Model System TRIS-NPG
Mogeritsch, J., Böttger, B. & Ludwig, A., 23 Jul 2019, p. 2-7.
Research output: Contribution to conference › Paper
Published
Diffusion-Reaction-Limited Mass Transfer on the Surface of an Electrically Conductive Droplet
Kharicha, A., Karimi Sibaki, E., Wu, M., Ludwig, A. & Bohacek, J., Jul 2019.
Research output: Contribution to conference › Paper
Published
Formation of micro-plumes at a planar solid/liquid interface in a temperature gradient
Mogeritsch, J., Pfeifer, T. & Ludwig, A., 19 Jun 2019.
Research output: Contribution to conference › Poster › Research
Published
Interaction between flow and faceted crystal growth
Stefan-Kharicha, M., Kharicha, A., Zaidat, K., Wu, M., Ludwig, A., Mogeritsch, J., Reiss, G. & Eßl, W., 19 Jun 2019.
Research output: Contribution to conference › Poster › Research
Published
Efficient model for the prediction of dendritic grain growth using the lattice Boltzmann method coupled with a cellular automaton algorithm
Jäger, S. & Ludwig, A., 17 Jun 2019, In: IOP Conference Series: Materials Science and Engineering. 529, 1, 012028.
Research output: Contribution to journal › Conference article › peer-review
Published
On modelling viscoplastic behavior of the solidifying shell in the funnel-type continuous casting mold
Vakhrushev, A., Kharicha, A., Wu, M., Ludwig, A., Nitzl, G., Tang, Y., Hackl, G., Watziger, J. & Rodrigues, C. M. G., 17 Jun 2019, In: IOP Conference Series: Materials Science and Engineering. 529, 1, 012081.
Research output: Contribution to journal › Conference article › peer-review
Published
On the Modelling of Macrosegregation during Twin-Roll Casting
Rodrigues, C. G., Ludwig, A., Kharicha, A., Wu, M. & Vakhrushev, A., 17 Jun 2019, In: IOP Conference Series: Materials Science and Engineering. 2019, 529, 8 p., 012041.
Research output: Contribution to journal › Conference article › peer-review
Published
A Comprehensive Analysis of Macrosegregation Formation During Twin-Roll Casting
Gomes Rodrigues, C., Ludwig, A., Wu, M., Kharicha, A. & Vakhrushev, A., 15 Jun 2019, In: Metallurgical and Materials Transactions B: Process Metallurgy and Materials Processing Science. 50.2019, 3, p. 1334-1350 17 p.
Research output: Contribution to journal › Article › Research › peer-review
E-pub ahead of print
A GPU solver for symmetric positive-definite matrices vs. traditional codes
Bohacek, J., Kharicha, A., Ludwig, A., Wu, M., Holzmann, T. & Karimi-Sibaki, E., 7 Mar 2019, (E-pub ahead of print) In: Computers and mathematics with applications. 79.2019, 9, p. 2933-2943 11 p.
Research output: Contribution to journal › Article › Research › peer-review
Published
Volume-Averaged Modeling of Multiphase Flow Phenomena during Alloy Solidification
Wu, M., Ludwig, A. & Kharicha, A., Feb 2019, In: Metals : open access journal . 9.2019, 2, 229.
Research output: Contribution to journal › Review article › peer-review
Published
An Experimental Benchmark of Non-metallic Inclusion Distribution Inside a Heavy Continuous-Casting Slab
Liu, Z., Li, B., Wu, M., Xu, G., Ruan, X. & Ludwig, A., 2 Jan 2019, In: Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science. 50.2019, 3, p. 1370-1379 10 p.
Research output: Contribution to journal › Article › Research › peer-review
Published
A dynamic mesh method to model shape change during electrodeposition
Karimi-Sibaki, E., Kharicha, A., Abdi, M., Wu, M., Ludwig, A. & Bohacek, J., 1 Jan 2019, In: Journal of the Electrochemical Society. 166, 12, p. D521-D529
Research output: Contribution to journal › Article › Research › peer-review
Published
Calculation Accuracy and Efficiency of a Transient Model for Submerged Entry Nozzle Clogging
Barati, H., Wu, M., Ludwig, A. & Kharicha, A., 2019, In: Metallurgical and Materials Transactions B: Process Metallurgy and Materials Processing Science. 50.2019, 3, p. 1429-1443 15 p.
Research output: Contribution to journal › Article › Research › peer-review
Published
Formation of micro-plumes at a planar solid liquid interface in a temperature gradient
Mogeritsch, J., Pfeifer, T. & Ludwig, A., 2019.
Research output: Contribution to conference › Paper
Published
Investigations on Collective Motion of Cathode Spots in the VAR Process
Kharicha, A., Karimi Sibaki, E., Wu, M. & Ludwig, A., 2019, p. 11-16.
Research output: Contribution to conference › Paper › peer-review
Published
Modeling Electrochemical Transport of Ions in the ESR Process
Karimi Sibaki, E., Kharicha, A., Wu, M., Ludwig, A. & Bohacek, J., 2019, p. 131-138.
Research output: Contribution to conference › Paper › peer-review
Published
Numerical Investigation of the Vacuum Arc Remelting (VAR) Process
Karimi Sibaki, E., Kharicha, A., Wu, M., Ludwig, A., Bohacek, J., Holzgruber, H., Ofner, B., Scheriau, A. & Kubin, M., 2019, p. 55-62.
Research output: Contribution to conference › Paper › peer-review
Published
On modelling parasitic solidification due to heat loss at submerged entry nozzle region of continuous casting mold
Vakhrushev, A., Kharicha, A., Ludwig, A., Nitzl, G., Tang, Y., Hackl, G. & Watzinger, J., 2019.
Research output: Contribution to conference › Paper › peer-review
Published
On modelling viscoplastic behaviour of the solidifying shell in the funnel-type continuous casting mold.
Vakhrushev, A., Kharicha, A., Ludwig, A., Tang, Y., Hackl, G., Watzinger, J. & Gomes Rodrigues, C., 2019.
Research output: Contribution to conference › Paper › peer-review
Published
Optimizing the flow conditions in the thin-slab casting mold using electromagnetic brake
Vakhrushev, A., Kharicha, A., Liu, Z., Wu, M., Ludwig, A., Nitzl, G., Tang, Y., Hackl, G. & Watzinger, J., 2019, p. 615-619.
Research output: Contribution to conference › Paper › peer-review
Published
Using a numerical model to study the transient clogging phenomena in SEN during continuous casting of steel
Wu, M., Barati, H., Kharicha, A. & Ludwig, A., 2019, p. 664-667.
Research output: Contribution to conference › Paper › peer-review
2018
Published
Numerical Investigation of Collective Motion of Cathode Spots
Kharicha, A., Karimi-Sibaki, E., Ludwig, A. & Wu, M., 15 Nov 2018, 28th International Symposium on Discharges and Electrical Insulation in Vacuum: ISDEIV. Vol. 2. p. 467-469 3 p. (International Symposium on Discharges and Elevtrical Insultaion in Vacuum, ISDEIV).
Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
Published
Scale-Adaptive Simulation of Transient Two-Phase Flow in Continuous-Casting Mold
Liu, Z., Vakhrushev, A., Wu, M., Kharicha, A., Ludwig, A. & Li, B., 30 Oct 2018, In: Metallurgical and Materials Transactions B: Process Metallurgy and Materials Processing Science. 50.2019, 1, p. 543-554 12 p.
Research output: Contribution to journal › Article › Research › peer-review
Published
Electro-vortical MHD Interface Instabilities
Kharicha, A., Karimi Sibaki, E., Wu, M. & Ludwig, A., Oct 2018.
Research output: Contribution to conference › Paper › peer-review
Published
Modeling of the Twin-Roll Casting Process: Transition from Casting to Rolling
Rodrigues, C., Ludwig, A., Kharicha, A. & Wu, M., 29 Sept 2018, In: Transactions of the Indian Institute of Metals. 71.2018, November, p. 2645-2649 5 p.
Research output: Contribution to journal › Article › Research › peer-review
Published
Contribution of an Electro-Vortex Flow to Primary, Secondary, and Tertiary Electric Current Distribution in an Electrolyte
Karimi Sibaki, E., Kharicha, A., Wu, M., Ludwig, A. & Bohacek, J., 7 Sept 2018, In: Journal of the Electrochemical Society. 165.2018, 11, p. E604-E615 12 p.
Research output: Contribution to journal › Article › Research › peer-review
Published
Investigation on the Binary Organic Components TRIS-NPG as Suitable Model Substances for Metal-Like Solidification
Mogeritsch, J. & Ludwig, A., 2 Sept 2018, p. 330-335. 6 p.
Research output: Contribution to conference › Paper › peer-review
Published
Investigation on the Liquid Flow ahead of the Solidification Front During the Formation of Peritectic Layered Solidification Structure
Mogeritsch, J., Pfeifer, T., Stefan-Kharicha, M. & Ludwig, A., 2 Sept 2018, p. 319-324. 6 p.
Research output: Contribution to conference › Paper › peer-review
Published
Effect of an Electrically-Conducting Wall on Transient Magnetohydrodynamic Flow in a Continuous-Casting Mold with an Electromagnetic Brake
Liu, Z., Vakhrushev, A., Wu, M., Karimi-Sibaki, E., Kharicha, A., Ludwig, A. & Li, B., 4 Aug 2018, In: Metals : open access journal . 8.2018, 8, 14 p., 609.
Research output: Contribution to journal › Article › Research › peer-review
Published
Use of a mixed columnar-equiaxed solidification model to analyse the formation of as-cast structure and macrosegregation in a Sn-10 wt% Pb benchmark experiment
Zheng, Y., Wu, M., Karimi-Sibaki, E., Kharicha, A. & Ludwig, A., 1 Jul 2018, In: International journal of heat and mass transfer. 122, p. 939-953 15 p.
Research output: Contribution to journal › Article › Research › peer-review
Published
Review of Ammonium Chloride–Water Solution Properties
Stefan-Kharicha, M., Kharicha, A., Mogeritsch, J., Wu, M. & Ludwig, A., Jun 2018, In: Journal of chemical & engineering data : the ACS journal for data / the ACS journal for data . 2018, 9
Research output: Contribution to journal › Article › Research › peer-review
Published
On the Coupling Mechanism of Equiaxed Crystal Generation with the Liquid Flow Driven by Natural Convection During Solidification
Stefan-Kharicha, M., Kharicha, A., Wu, M. & Ludwig, A., 1 May 2018, In: Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science. 49, 5, p. 1708-1724 17 p.
Research output: Contribution to journal › Article › Research › peer-review
Published
Heat Transfer Coefficient at Cast-Mold Interface During Centrifugal Casting: Calculation of Air Gap
Bohacek, J., Kharicha, A., Ludwig, A., Wu, M. & Karimi-Sibaki, E., 12 Mar 2018, In: Metallurgical and Materials Transactions B: Process Metallurgy and Materials Processing Science. 49.2018, 3, p. 1421-1433 13 p.
Research output: Contribution to journal › Article › Research › peer-review
Published
Investigation on Peritectic Layered Structures by Using the Binary Organic Components TRIS-NPG as Model Substances for Metal-Like Solidification
Mogeritsch, J. & Ludwig, A., 26 Feb 2018, In: Research & Development in Material Science. p. 1-3 3 p.
Research output: Contribution to journal › Article › Research › peer-review
Published
A transient model for nozzle clogging
Barati, H., Wu, M., Kharicha, A. & Ludwig, A., 2 Feb 2018, In: Powder Technology. 329.2018, 15 April, p. 181-198 18 p.
Research output: Contribution to journal › Article › Research › peer-review
Published
A transient model for nozzle clogging - Part II: Validation and verification
Barati, H., Wu, M., Kharicha, A. & Ludwig, A., 1 Jan 2018, In: Powder Technology.
Research output: Contribution to journal › Article › Research › peer-review
Published
Macrosegregation Formation in an Al–Si Casting Sample with Cross-sectional Change During Directional Solidification
Zhang, H., Wu, M., Zheng, Y., Ludwig, A. & Kharicha, A., 1 Jan 2018, In: Transactions of the Indian Institute of Metals.
Research output: Contribution to journal › Article › Research › peer-review
Published
Numerical modeling of bubbly flow in continuous casting mold using two population balance approaches
Liu, Z., Vakhrushev, A., Wu, M., Ludwig, A., Li, B. & Xu, G., 1 Jan 2018, ICS 2018 - 7th International Congress on Science and Technology of Steelmaking: The Challenge of Industry 4.0. Associazione Italiana di Metallurgia, (ICS 2018 - 7th International Congress on Science and Technology of Steelmaking: The Challenge of Industry 4.0).
Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
Published
Numerical modelling of the MHD flow in continuous casting mold by two CFD platforms ANSYS Fluent and OpenFOAM
Vakhrushev, A., Liu, Z., Wu, M., Kharicha, A., Ludwig, A., Nitzl, G., Tang, Y. & Hackl, G., 1 Jan 2018, ICS 2018 - 7th International Congress on Science and Technology of Steelmaking: The Challenge of Industry 4.0. Associazione Italiana di Metallurgia, (ICS 2018 - 7th International Congress on Science and Technology of Steelmaking: The Challenge of Industry 4.0).
Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
Published
Review on Modeling and Simulation of Electroslag Remelting
Kharicha, A., Karimi-Sibaki, E., Wu, M., Ludwig, A. & Bohacek, J., 1 Jan 2018, In: Steel research international. 89, 1, 1700100.
Research output: Contribution to journal › Review article › peer-review
Published
Simulation in metallurgy: Past achievements and future challenges
Bohacek, J., Koutna, N., Ludwig, A., Rodrigues, C., Karimi-Sibaki, E. & Kharicha, A., 1 Jan 2018, In: IOP Conference Series: Materials Science and Engineering. p. 28-33 6 p.
Research output: Contribution to journal › Article › Research › peer-review
Published
Simulation of As-Cast Steel Ingots
Wu, M., Ludwig, A. & Kharicha, A., 1 Jan 2018, In: Steel research international. 89, 1, 1700037.
Research output: Contribution to journal › Review article › peer-review
Published
Simulation of non-metallic inclusion deposition and clogging of nozzle
Barati, H., Wu, M., Holzmann, T., Kharicha, A. & Ludwig, A., 1 Jan 2018, In: Minerals, Metals and Materials : International Symposium on CFD Modeling and Simulation in Materials Processing. p. 149-158 10 p.
Research output: Contribution to journal › Article › Research › peer-review
Published
Yield strength prediction in 3D during local heat treatment of structural A356 alloy components in combination with thermal-stress analysis
Holzmann, T., Ludwig, A. & Raninger, P., 1 Jan 2018, In: Minerals, Metals and Materials : International Symposium on CFD Modeling and Simulation in Materials Processing. 9 p.
Research output: Contribution to journal › Article › Research › peer-review
Published
Concept of semi-continuous castin (SCC) for large steel strand: a numerical study.
Wu, M., Zheng, Y., Kharicha, A. & Ludwig, A., 2018.
Research output: Contribution to conference › Paper › peer-review
Published
Discussion on possible solidification during SEN clogging in steel continuous casting
Barati, H., Wu, M., Kharicha, A. & Ludwig, A., 2018.
Research output: Contribution to conference › Paper › peer-review
Published
"Influence of nucleation and drednrite fragmentation on as-cast structure of Sn-10.0wt.Pb benchmark.
Zheng, Y., Kharicha, A. & Ludwig, A., 2018, p. 226. 231 p.
Research output: Contribution to conference › Paper › peer-review
Published
Investigation on Mesh Sensitivity of a Transiet Model for Nozzle Clogging
Barati, H., Wu, M., Kharicha, A. & Ludwig, A., 2018, p. 62. 66 p.
Research output: Contribution to conference › Paper › peer-review
Published
Numerical modeling of the MHD flow in continuous casting mold by two CFD platforms ANSYS Fluent and OpenFOAM
Vakhrushev, A., Wu, M., Kharicha, A. & Ludwig, A., 2018.
Research output: Contribution to conference › Paper › peer-review
Published
Numerical Modelling of Bubbly Flow in Continuous Casting Mold using Two Population Balance Approaches
Liu, Z., Vakhrushev, A., Wu, M., Ludwig, J., Li, B., Xu, G. & Ludwig, A., 2018, p. 1. 10 p.
Research output: Contribution to conference › Paper › peer-review
Published
Numerical simulation of fluid flow in the mushy zone under rotation magnetic field: Influence of Permeability
Zhang, H., Wu, M., Zheng, Y., Ludwig, A. & Kharicha, A., 2018.
Research output: Contribution to conference › Paper › peer-review
Published
“Premature melt solidification during mold filling and its influence on the as-cast structure”
Wu, M., Ahmadein, M. & Ludwig, A., 2018, In: Frontiers of Mechanical Engineering.
Research output: Contribution to journal › Article › Research › peer-review
2017
E-pub ahead of print
Incorporation of fragmentation into a volume average solidification model
Zheng, Y., Wu, M., Kharicha, A. & Ludwig, A., 5 Dec 2017, (E-pub ahead of print) In: Modelling and simulation in materials science and engineering. 26.2018, 1, 18 p., 015004.
Research output: Contribution to journal › Article › Research › peer-review
Published
A (non-)hydrostatic free-surface numerical model for two-layer flows
Bohacek, J., Kharicha, A., Ludwig, A., Wu, M., Karimi-Sibaki, E., Paar, A., Brandner, M., Elizondo, L. & Trickl, T., 18 Apr 2017, In: Applied Mathematics and Computation. 319.2018, 15 February, p. 301-317 17 p.
Research output: Contribution to journal › Article › Research › peer-review
Published
In-situ observation of coupled peritectic growth in a binary organic model alloy
Ludwig, A., Mogeritsch, J. P. & Pfeifer, T., 1 Mar 2017, In: Acta Materialia. 126, p. 329-335 7 p.
Research output: Contribution to journal › Article › Research › peer-review
Published
Phase-field modelling of ternary eutetic solidification in hot dip galvanization
Mogeritsch, J. P., Ludwig, A., Böttger, B., Angeli, G., Riener, C. K. & Ebner, R., 1 Jan 2017, Proceedings of the 7th International Conference on Coupled Problems in Science and Engineering, COUPLED PROBLEMS 2017. Vol. 2017-January. p. 1171-1182 12 p.
Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
Published
12. Karimi-Sibaki E., Kharicha A., Wu M., Bohacek J., Ludwig A., Steel Res. Int., Vol. 88 (5), 2017, DOI: 10.1002/srin.201770051. “Cover Picture: steel research int. 5/2017”
Karimi Sibaki, E., Wu, M., Ludwig, A., Bohacek, J. & Kharicha, A., 2017
Research output: Other contribution › Research
Published
“A four phase model for the macrosegregation and shrinkage cavity during solidification of steel ingot”
Wu, M., Kharicha, A. & Ludwig, A., 2017, In: Applied Mathematical Modelling. 41, p. 102-120
Research output: Contribution to journal › Article › Research › peer-review
Published
“A water experiment benchmark to evaluate numerical models for the motion of particles in continuous casting tundish”
Vakhrushev, A., Wu, M., Ludwig, A., Tang, Y., Hackl, G. & Nitzl, G., 2017, In: Steel research international. 88, p. 1600276 (1-13)
Research output: Contribution to journal › Article › Research › peer-review
Published
Discussion on Modeling Capability for Macrosegregation
Wu, M., Kharicha, A. & Ludwig, A., 2017, In: High temperature material processes. 36, p. 531-539
Research output: Contribution to journal › Article › Research › peer-review
Published
Establishing a numerical criterion to verify the RANS-type flow simulation in application to the continuous casting process
Vakhrushev, A., Ludwig, A., Wu, M., Nitzl, G., Tang, Y. & Hackl, G., 2017, In: Applied Mathematical Modelling.
Research output: Contribution to journal › Article › Research › peer-review
Published
Massive formation of equiaxed crystals by avalanches of mushy zone segments
Ludwig, A., Stefan-Kharicha, M., Kharicha, A. & Wu, M., 2017, In: Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science. 48, 6, p. 2927-2931 5 p.
Research output: Contribution to journal › Article › Research › peer-review
Published
Numerical Study of Crystal Sedimentation Induced Segregation Band in Steel Ingots
Wu, M., Kharicha, A. & Ludwig, A., 2017, p. 503-507. 5 p.
Research output: Contribution to conference › Presentation › Research › peer-review
Published
Numerical Study of Crystal Sedimentation Induced Segregation Band in Steel Ingots
Wu, M., Kharicha, A. & Ludwig, A., 2017, SP17.
Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
Published
Phase-Field Modelling of Ternary Eutectic Solidification in Hot Dip Galvanization
Mogeritsch, J. & Ludwig, A., 2017.
Research output: Contribution to conference › Presentation › Research › peer-review
Published
Phase-Field Modelling of Ternary Eutectic Solidification in Hot Dip Galvanization
Mogeritsch, J. & Ludwig, A., 2017, International Center for Numerical Methods in Engineering.
Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
Published
“Role of fragmentation in as-cast structure: numerical study and experimental validation”
Zheng, Y., Wu, M., Kharicha, A. & Ludwig, A., 2017, In: China Foundry. 14, p. 321-326
Research output: Contribution to journal › Article › Research › peer-review
Published
“Simulation of as-cast steel ingot”
Wu, M., Ludwig, A. & Kharicha, A., 2017, In: Steel research international.
Research output: Contribution to journal › Article › Research › peer-review
Published
Toward Modeling of Electrochemical Reactions during Electroslag Remelting (ESR) Process
Karimi Sibaki, E., Kharicha, A., Wu, M., Ludwig, A. & Bohacek, J., 2017, In: Steel research international. 88.2017, 5, p. Cover 8 p., 1700011.
Research output: Contribution to journal › Article › Research › peer-review
Published
“Towards modeling of electrochemical reactions during electroslag remelting (ESR) process”
Karimi Sibaki, E., Kharicha, A., Wu, M., Bohacek, J. & Ludwig, A., 2017, In: Steel research international. 88, 5, p. 1700011 (1-8)
Research output: Contribution to journal › Article › Research › peer-review
Published
Volume Average Modelling of Equiaxed-to-Columnar Transition in a Vertically Solidified Pb-18 wt.%Sn Cavity
Zheng, Y., Wu, M., Kharicha, A. & Ludwig, A., 2017, p. 312-16. 6 p.
Research output: Contribution to conference › Presentation › Research › peer-review
Published
Volume Average Modelling of Equiaxed-to-Columnar Transition in a Vertically Solidified Pb-18 wt.%Sn Cavity
Zheng, Y., Wu, M., Kharicha, A. & Ludwig, A., 2017, SP17.
Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
2016
Published
A columnar & non-globular equiaxed mixed three-phase model based on thermosolutal convection and grain movement
Li, J., Ge, H., Wu, M., Ludwig, A. & Li, J., 11 Sept 2016, In: Jinshu-xuebao : Acta metallurgica Sinica. 52, 9, p. 1096-1104 9 p.
Research output: Contribution to journal › Article › Research › peer-review
Published
An attempt to model electrode change during the ESR process
Karimi-Sibaki, E., Kharicha, A., Wu, M., Ludwig, A., Holzgruber, H., Ofner, B., Scheriau, A., Kubin, M. & Ramprecht, M., 10 Aug 2016, In: IOP Conference Series: Materials Science and Engineering. 143, 1, 012006.
Research output: Contribution to journal › Conference article › peer-review
Published
A numerical study on electrochemical transport of ions in calcium fluoride slag
Karimi-Sibaki, E., Kharicha, A., Wu, M. & Ludwig, A., 10 Aug 2016, In: IOP Conference Series: Materials Science and Engineering. 143, 1, 012008.
Research output: Contribution to journal › Conference article › peer-review
Published
Assessment of different turbulence models for the motion of non-metallic inclusion in induction crucible furnace
Barati, H., Wu, M., Kharicha, A. & Ludwig, A., 10 Aug 2016, In: IOP Conference Series: Materials Science and Engineering. 143, 1, 012026.
Research output: Contribution to journal › Conference article › peer-review
Published
Simulation of macrosegregation in a large vertical continuous casting of steel
Zheng, Y., Wu, M., Kharicha, A. & Ludwig, A., 10 Aug 2016, In: IOP Conference Series: Materials Science and Engineering. 143, 1, 012032.
Research output: Contribution to journal › Conference article › peer-review
Published
Transient melting of an ESR electrode
Kharicha, A., Karimi-Sibaki, E., Bohacek, J., Wu, M. & Ludwig, A., 10 Aug 2016, In: IOP Conference Series: Materials Science and Engineering. 143, 1, 012003.
Research output: Contribution to journal › Conference article › peer-review
Published
Simulation in Metallurgical Processing: Recent Developments and Future Perspectives
Ludwig, A., Wu, M. & Kharicha, A., 1 Aug 2016, In: JOM. 68, 8, p. 2191-2197 7 p.
Research output: Contribution to journal › Review article › peer-review
Published
International Conference on Materials, Processing and Product Engineering 2015 (MPPE2015)
Eck, S., Ludwig, A. & Ebner, R., 14 Apr 2016, In: IOP Conference Series: Materials Science and Engineering. 119, 1, 011001.
Research output: Contribution to journal › Editorial › peer-review
Published
Simulation of the Electric Signal During the Formation and Departure of Droplets in the Electroslag Remelting Process
Kharicha, A., Wu, M., Ludwig, A. & Karimi-Sibaki, E., 1 Apr 2016, In: Metallurgical and Materials Transactions B: Process Metallurgy and Materials Processing Science. 47, 2, p. 1427-1434 8 p.
Research output: Contribution to journal › Article › Research › peer-review
Published
On Validity of Axisymmetric Assumption for Modeling an Industrial Scale Electroslag Remelting Process
Karimi-Sibaki, E., Kharicha, A., Bohacek, J., Wu, M. & Ludwig, A., 1 Feb 2016, In: Advanced Engineering Materials. 18, 2, p. 224-230 7 p.
Research output: Contribution to journal › Article › Research › peer-review
Published
On the importance of modeling 3D shrinkage cavities for the prediction of macrosegregation in steel ingots
Ludwig, A., Wu, M. & Kharicha, A., 1 Jan 2016, p. 3-10. 8 p.
Research output: Contribution to conference › Paper › peer-review
Published
Automatic optimization of localized heat treatment for Al-Si-Mg alloys
Ludwig, A. & Holzmann, T., 2016, In: IOP Conference Series: Materials Science and Engineering.
Research output: Contribution to journal › Article › Research › peer-review
Published
Compact seaweed growth of peritectic phase on confined, flat properitectic dendrites
Mogeritsch, J. & Ludwig, A., 2016, In: Journal of crystal growth.
Research output: Contribution to journal › Article › Research › peer-review
Published
Free-surface flow in horizontally rotating cylinder: experiment and simulation
Bohacek, J., Kharicha, A., Ludwig, A., Wu, M., Paar, A., Brandner, M., Elizondo, L. & Trickl, T., 2016, In: IOP Conference Series: Materials Science and Engineering. p. 1-7
Research output: Contribution to journal › Article › Research › peer-review
Published
Influence of forced convection on solidification and remelting in the developing mushy zone
Wu, M., Vakhrushev, A., Ludwig, A. & Kharicha, A., 2016, In: IOP Conference Series: Materials Science and Engineering.
Research output: Contribution to journal › Article › Research › peer-review
Published
Localized strengthening of al-based casting alloys by automatized optimization of laser heat treatment
Ludwig, A. & Holzmann, T., 2016, In: Minerals, Metals and Materials : International Symposium on CFD Modeling and Simulation in Materials Processing. 8 p.
Research output: Contribution to journal › Article › Research › peer-review
Published
Numerical analysis of macrosegregation in vertically solidified Pb-Sn test castings - Part I: Columnar solidification
Wu, M., Zeng, Y., Kharicha, A. & Ludwig, A., 2016, In: Computational materials science.
Research output: Contribution to journal › Article › Research › peer-review
Published
Numerical analysis of macrosegregation in vertically solidified Pb-Sn test castings – Part II : Equiaxed solidification
Zheng, Y., Wu, M., Kharicha, A. & Ludwig, A., 2016, In: Computational materials science.
Research output: Contribution to journal › Article › Research › peer-review
Published
Numerical analysis of solidification and macrosegregation in a semi-continuously cast steel strand
Zheng, Y. (Co-editor), Wu, M., Kharicha, A. (Co-editor) & Ludwig, A. (Co-editor), 2016.
Research output: Contribution to conference › Poster › Research › peer-review
Published
Numerical investigation of solidification and CET of the transparent alloy NPG-37.5 wt.% DC in microgravity “TRACE” experiment
Ahmadein, M., Wu, M., Sturz, L., Zimmermann, G. & Ludwig, A., 2016, In: IOP Conference Series: Materials Science and Engineering.
Research output: Contribution to journal › Article › Research › peer-review
Published
Simulation of the Electrical Signal During the Formation and Departure of Droplets in the Electro Slag Remelting Process
Kharicha, A., Wu, M., Ludwig, A. & Karimi Sibaki, E., 2016, In: Metallurgical and Materials Transactions B: Process Metallurgy and Materials Processing Science.
Research output: Contribution to journal › Article › Research › peer-review
Published
Simulation of thermos-solutal convection induced macrosegregation in a Sn-10% Pb alloy benchmark during columnar solidification
Zheng, Y., Wu, M., Kharicha, A. & Ludwig, A., 2016, In: IOP Conference Series: Materials Science and Engineering.
Research output: Contribution to journal › Article › Research › peer-review
Published
Simulation of Turbulent Melt Flow and Deposition of Non-metallic Inclusions on Nozzle Wall of a Clogging Simulator
Barati, H. (Co-editor), Wu, M., Kharicha, A. (Co-editor) & Ludwig, A. (Co-editor), 2016.
Research output: Contribution to conference › Paper › peer-review
2015
Published
In-situ observation of the dynamic of peritectic coupled growth using the binary organic system TRIS-NPG
Mogeritsch, J. & Ludwig, A., 10 Nov 2015, p. 012055. 12055 p.
Research output: Contribution to conference › Paper › peer-review
Published
On Macrosegregation
Ludwig, A., Wu, M. & Kharicha, A., 1 Nov 2015, In: Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science. 46, 11, p. 4854-4867 14 p.
Research output: Contribution to journal › Article › Research › peer-review
Published
Simulation of Crystal Sedimentation and Viscoplastic Behavior of Sedimented Equiaxed Mushy Zones
Ludwig, A., Vakhrushev, A., Wu, M., Holzmann, T. & Kharicha, A., 25 Sept 2015, In: Transactions of the Indian Institute of Metals. 68, 6, p. 1087-1094 8 p.
Research output: Contribution to journal › Article › Research › peer-review
E-pub ahead of print
A Dynamic Mesh-Based Approach to Model Melting and Shape of an ESR Electrode
Karimi-Sibaki, E., Kharicha, A., Bohacek, J., Wu, M. & Ludwig, A., 11 Jun 2015, (E-pub ahead of print) In: Metallurgical and Materials Transactions B: Process Metallurgy and Materials Processing Science. 46.2015, 5, p. 2049-2061 13 p.
Research output: Contribution to journal › Article › Research › peer-review
Published
Analysis of macrosegregation formation and columnar-to-equiaxed transition during solidification of Al-4 wt.%Cu ingot using a 5-phase model
Ahmadein, M., Wu, M. & Ludwig, A., 1 May 2015, In: Journal of crystal growth. 417, p. 65-74 10 p., 22363.
Research output: Contribution to journal › Article › Research › peer-review
Published
Experimental and numerical analysis of free surface deformation in an electrically driven flow
Kharicha, A., Teplyakov, I., Ivochkin, Y., Wu, M., Ludwig, A. & Guseva, A., 1 Apr 2015, In: Experimental Thermal and Fluid Science. 62, p. 192-201 10 p.
Research output: Contribution to journal › Article › Research › peer-review
Published
An approximate Riemann solver for shallow water equations and heat advection in horizontal centrifugal casting
Bohacek, J., Kharicha, A., Ludwig, A. & Wu, M., 2015, In: Journal of computational and applied mathematics. 267, p. 179-194
Research output: Contribution to journal › Article › Research › peer-review
Published
An approximate Riemann solver for two layer shallow water equations in horizontal centrifugal casting
Bohacek, J., Kharicha, A., Ludwig, A., Wu, M., Paar, A., Brandner, M., Elizondo, L. & Trickl, T., 2015, 6th. Int. Conf. "SteelSim 2015", Bordolino, Italy, on data storage device.
Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
Published
An attempt to model electrode change during the ESR process
Karimi Sibaki, E., Kharicha, A., Wu, M., Ludwig, A., Holzgruber, H., Ofner, B., Scheriau, A., Kubin, M. & Ramprecht, M., 2015, Int. Symp. on Liquid Metal Processing and Casting (LMPC-15).
Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
Published
An attempt to model shrinkage cavity coupled with macrosegregation in steel ingots
Wu, M., Ludwig, A. & Kharicha, A., 2015, 6th. Int. Conf. "SteelSim 2015", Bordolino, Italy, on data storage device.
Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
Published
A numerical study on electrochemical transport of ions in calcium fluoride slag
Karimi Sibaki, E., Kharicha, A., Wu, M. & Ludwig, A., 2015, Int. Symp. on Liquid Metal Processing and Casting (LMPC-15).
Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
Published
A scale adaptive dendritic envelope model of solidification at mesoscopic scales
Kharicha, A., Stefan-Kharicha, M., Ludwig, A. & Wu, M., 2015, In: IOP Conference Series: Materials Science and Engineering.
Research output: Contribution to journal › Article › Research › peer-review
Published
A shallow layer model predicting the zinc film thickness during thecontinuous hot-dip galvanizing process
Kharicha, A., Pfeiler, C., Bohacek, J., Ludwig, A., Wu, M., Mogeritsch, J., Angelini, G. & Riener, C. K., 2015.
Research output: Contribution to conference › Paper › peer-review
Published
Assessment of Different Turbulence Models for the Motion of Non-metallic Inclusion in Induction Crucible Furnace
Barati, H., Wu, M., Ludwig, A. & Kharicha, A., 2015, Int. Symp. on Liquid Metal Processing and Casting (LMPC-15).
Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
Published
Benchmark experiments and numerical modelling of the columnar-equiaxed dendritic growth in the transparent alloy Neopentylglycol-(d)Camphor
Sturz, L., Wu, M., Zimmermann, G., Ludwig, A. & Ahmadein, M., 2015, In: IOP Conference Series: Materials Science and Engineering.
Research output: Contribution to journal › Article › Research › peer-review
Published
Experimental and numerical analysis of free surface deformationin an electrically driven flow
Kharicha, A., Teplyakov, I., Y., I., Wu, M., Ludwig, A. & Guseva, A., 2015, In: Experimental Thermal and Fluid Science. 62, p. 192-201
Research output: Contribution to journal › Article › Research › peer-review
Published
In-situ observation of the dynamic of peritectic coupled growth using the binary organic system TRIS-NPG
Mogeritsch, J. & Ludwig, A., 2015, MCWASP XIV (14th Modeling of Casting, Welding and Adv. Solidification Processes).
Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
Published
Modelling As-Cast Structure and Macrosegregation in Ingot Casting
Wu, M., Kharicha, A. & Ludwig, A., 2015, In: Materials China. 34, p. 640-651
Research output: Contribution to journal › Article › Research › peer-review
Published
Modelling of macrosegregation in direct chill casting considering columnar-to-equiaxed transition using 3-phase Eulerian approach
Hao, J., Lin, Y. J., Nie, Y., Wu, M. & Ludwig, A., 2015, In: IOP Conference Series: Materials Science and Engineering.
Research output: Contribution to journal › Article › Research › peer-review
Published
Modified shallow water equations with application for horizontal centrifugal casting of rolls
Kharicha, A., Bohacek, J., Ludwig, A. & Wu, M., 2015, In: Journal of Fluids Engineering.
Research output: Contribution to journal › Article › Research › peer-review
Published
Recent Developments and Future Perspectives in Simulation of Metallurgical Processes
Ludwig, A., Wu, M. & Kharicha, A., 2015, In: Berg- und hüttenmännische Monatshefte : BHM.
Research output: Contribution to journal › Article › Research
Published
Simulation of macrosegregation in a large vertical continuous casting of steel
Zheng, Y., Wu, M., Kharicha, A. & Ludwig, A., 2015, Int. Symp. on Liquid Metal Processing and Casting (LMPC-15).
Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
Published
Transient melting of an ESR electrode
Kharicha, A., Karimi Sibaki, E., Bohacek, J., Wu, M. & Ludwig, A., 2015, Int. Symp. on Liquid Metal Processing and Casting (LMPC-15).
Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
Published
Two-phase modelling of equiaxed crystal sedimentation and thermomechanic stress development in the sedimented packed bed
Ludwig, A., Vakhrushev, A., Holzmann, T., Wu, M. & Kharicha, A., 2015, In: IOP Conference Series: Materials Science and Engineering.
Research output: Contribution to journal › Article › Research › peer-review
Published
Using four-phase Eulerian volume averaging approach to model macrosegregation and shrinkage cavity
Wu, M., Kharicha, A. & Ludwig, A., 2015, In: IOP Conference Series: Materials Science and Engineering.
Research output: Contribution to journal › Article › Research › peer-review
2014
Published
Numerical Study about the Influence of Small Casting Speed Variations on the Metallurgical Length in Continuous Casting of Steel Slabs
Domitner, J., Wu, M. & Ludwig, A., 3 Jul 2014, In: Steel research international. 86, p. 184-188
Research output: Contribution to journal › Article › Research › peer-review
Published
Advanced Process Simulation of Solidification and Melting
Wu, M., Vakhrushev, A., Karimi Sibaki, E., Kharicha, A. & Ludwig, A., 15 Jan 2014, In: Berg- und hüttenmännische Monatshefte : BHM. 159.2014, 1, p. 30-40 11 p.
Research output: Contribution to journal › Article › Research
Published
Influence of dendritic morphology on the calculation of macrosegregation in steel ingot
Li, J., Wu, M. H., Ludwig, A., Kharicha, A. & Schumacher, P., 1 Jan 2014, Solidification and Gravity VI. p. 121-126 6 p. (Materials Science Forum; vol. 790-791).
Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
Published
Numerical study of the influence of diffusion-governed growth kinetics of ternary alloy on macrosegregation
Wu, M. H., Kharicha, A. & Ludwig, A., 1 Jan 2014, Solidification and Gravity VI. p. 85-90 6 p. (Materials Science Forum; vol. 790-791).
Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
Published
Simulation of solidification and convection of NH₄Cl-H₂O solution in a water-cooled copper mold
Ahmadein, M., Wu, M., Stefan Kharicha, M., Kharicha, A. & Ludwig, A., 1 Jan 2014, Solidification and Gravity VI. p. 247-252 6 p. (Materials Science Forum; vol. 790-791).
Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
Published
3D Lattice Boltzmann flow simulations through dendritic mushy zones
Ludwig, A., Kharicha, A., Hölzl, C., Domitner, J., Wu, M. & Pusztai, T., 2014, In: Engineering analysis with boundary elements. 45, p. 29-35
Research output: Contribution to journal › Article › Research › peer-review
Published
Annual report of CD-Lab activity during 2014, Project progress and achievements.
Karimi Sibaki, E., Kharicha, A., Wu, M., Ludwig, A. & Vakhrushev, A., 2014
Research output: Book/Report › Commissioned report › Transfer
Published
A numerical study of the influence of pouring technique on the as-cast structure of Al-Cu ingots
Ahmadein, M., Wu, M., Schumacher, P. & Ludwig, A., 2014, In: Materials Science Forum. p. 67-72
Research output: Contribution to journal › Article › Research › peer-review
Published
"A parameter study on the effect of slag electrode conductivity on the solidification of a large scale ESR ingot"
Karimi Sibaki, E., Kharicha, A., Wu, M., Ludwig, A., Holzgruber, H., Ofner, B. & Ramprecht, M., 2014, 2nd Int. Conf. Ingot Casting Rolling Forging, on data storage device..
Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
Published
"Evaluation of a 5-phase mixed columnar-equiaxed solidification model with a benchmark solidification experiment of NH4Cl-H2O solution"
Ahmadein, M., Wu, M., Stefan Kharicha, M., Kharicha, A. & Ludwig, A., 2014, In: Materials Science Forum. p. 247-252
Research output: Contribution to journal › Article › Research › peer-review
Published
"Experimental verification of the 3-phase continuous casting simulation using a water model"
Vakhrushev, A., Ludwig, A. & Wu, M., 2014, 8th European Continuous Casting Conf. on data storage device.
Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
Published
"Free surface deformation by the application of electrical currents"
Kharicha, A., Teplyakov, I., Ivochkin, Y., Wu, M., Ludwig, A. & Guseva, A., 2014, 9th Int. Pamir Conf. on Fundamental and applied MHD, Thermo acoustic and Space technologies. p. 245-249
Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
Published
"How to get a smooth ESR Ingot surface?"
Kharicha, A., Karimi Sibaki, E., Wu, M. & Ludwig, A., 2014, 2nd Int. Conf. Ingot Casting Rolling Forging on data storage device..
Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
Published
"Influence of crystal morphological parameters on the solidification of ESR ingot"
Karimi Sibaki, E., Kharicha, A., Wu, M., Ludwig, A. & Korp, J., 2014, In: Materials Science Forum. p. 396-401
Research output: Contribution to journal › Article › Research › peer-review
Published
Influence of dendritic morphology on the calculation of macrosegregation in steel ingot
Li, J., Wu, M., Ludwig, A., Kharicha, A. & Schumacher, P., 2014, Materials Science Forum Vols. 790-791. p. 121-126
Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
Published
Modeling diffusion-governed solidification of ternary alloys – Part 2:Macroscopic transport phenomena and macrosegregation
Wu, M., Li, J., Ludwig, A. & Kharicha, A., 2014, In: Computational materials science. 92, p. 267-285
Research output: Contribution to journal › Article › Research › peer-review
Published
"Numerical and experimental study of Horizontal Centrifugal Casting (MCL: A1.16)"
Bohacek, J., Kharicha, A. & Ludwig, A., 2014
Research output: Book/Report › Commissioned report › Transfer
Published
"Numerical Study of the Influence of Diffusion-Governed Growth Kinetics on Macrosegregation"
Wu, M., Kharicha, A. & Ludwig, A., 2014, In: Materials Science Forum. p. 85-90
Research output: Contribution to journal › Article › Research › peer-review
Published
Observation of flow regimes and transitions during a columnar solidification experiment
Stefan Kharicha, M., Kharicha, A., Wu, M. & Ludwig, A., 2014, In: Fluid Dynamics Research. 46, p. 1-21
Research output: Contribution to journal › Article › Research › peer-review
Published
On Melting of Electrodes during Electro-Slag Remelting
Kharicha, A., Ludwig, A. & Wu, M., 2014, In: ISIJ international. 54, p. 1621-1628
Research output: Contribution to journal › Article › Research › peer-review
Published
Prediction of macrosegregation in steel ingot using a simplified denderitic model
Li, J., Wu, M., Ludwig, A., Kharicha, A. & Karimi Sibaki, E., 2014, In: Materials Science Forum. 790-791, p. 121-126
Research output: Contribution to journal › Article › Research › peer-review
Published
Progress report and ashievements, Sponsorgroup project, 27.05.2014
Kemminger, A. & Ludwig, A., 2014
Research output: Book/Report › Commissioned report › Transfer
Published
Progress report and ashievements, Sponsorgroup project, 30.10.2014
Kemminger, A. & Ludwig, A., 2014
Research output: Book/Report › Commissioned report › Transfer
Published
Recurring instability of cellular growth in a near peritectic transparent NPG-TRIS alloy system
Ludwig, A. & Mogeritsch, J., 2014, In: Materials Science Forum.
Research output: Contribution to journal › Article › Research › peer-review
2013
Published
Modeling diffusion-governed solidification of ternary alloys - Part 1: Coupling solidification kinetics with thermodynamics
Wu, M., Li, J., Ludwig, A. & Kharicha, A., 13 Jun 2013, In: Computational materials science. 79, p. 830-840 11 p.
Research output: Contribution to journal › Article › Research › peer-review
Published
Prediction of the as-cast structure of Al-4.0 Wt Pct Cu ingots
Ahmadein, M., Wu, M., Li, J. H., Schumacher, P. & Ludwig, A., 1 Jun 2013, In: Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science. 44, 6, p. 2895-2903 9 p.
Research output: Contribution to journal › Article › Research › peer-review
Published
Contribution of the mould current to the ingot surface quality in the electroslag remelting process
Kharicha, A., Sibaki, E. K., Wu, M. & Ludwig, A., 1 Jan 2013, International Symposium on Liquid Metal Processing and Casting 2013, LMPC 2013. p. 95-99 5 p.
Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
Published
Variation of the resistance during the electrode movement in the electroslag remelting process
Kharicha, A., Wu, M. & Ludwig, A., 1 Jan 2013, International Symposium on Liquid Metal Processing and Casting 2013, LMPC 2013. p. 145-150 6 p.
Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
Published
2nd annual Report "A volume-Averaging Solidification Model Incorporating Dendritic Crystal Morphology: Model Description, Improvement, and Verification"
Ahmadein, M., Wu, M. & Ludwig, A., 2013
Research output: Book/Report › Commissioned report › Transfer › peer-review
Published
3D magneto-hydrodynamic simulation of the liquid region in an electro-slag remelting process
Kharicha, A., Ludwig, A. & Wu, M., 2013, In: International journal of heat and mass transfer.
Research output: Contribution to journal › Article › Research › peer-review
Published
"A meandering sinking flow as possible explanation for the thermohaline staircaises in oceans"
Kharicha, A., Stefan Kharicha, M., Ludwig, A. & Wu, M., 2013, "A meandering sinking flow as possible explanation for the thermohaline staircaises in oceans".
Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
Published
Annual report: Characterisation and Optimisation of the Electrolyte Flow in Conventional Tankhouse Cells
Kemminger, A. & Ludwig, A., 2013
Research output: Book/Report › Commissioned report › Transfer › peer-review
Published
A Numerical Study on the Influence of the Frequency of the Applied AC Current on the Electroslag Remelting Process"
Karimi Sibaki, E., Kharicha, A., Wu, M., Ludwig, A., Holzgruber, H., Ofner, B. & Ramprecht, M., 2013, A Numerical Study on the Influence of the Frequency of the Applied AC Current on the Electroslag Remelting Process". p. 13-19
Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
Published
Application of microprobe analysis to the reconstruction and characterization of dendritic structures
Domitner, J., Kharicha, A., Wu, M. & Ludwig, A., 2013, In: Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science. 44, p. 607-616
Research output: Contribution to journal › Article › Research › peer-review
Published
"Contribution of the Mould Current to the Ingor Surface quality in the Electroslag Remelting Process"
Kharicha, A., Karimi Sibaki, E., Wu, M. & Ludwig, A., 2013, "Contribution of the Mould Current to the Ingor Surface quality in the Electroslag Remelting Process". p. 95-99
Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
Published
"Discrete Phase Modelling for Continuous Casting: Model Verification and Application"
Vakhrushev, A., Ludwig, A., Wu, M., Tang, Y., Nitzl, G. & Hackl, G., 2013, "Discrete Phase Modelling for Continuous Casting: Model Verification and Application".
Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
Published
"Evaluation of a 5-phase mixed columnar-equiaxed solidification model with a benchmark solidification experiment of NH4Cl-H2O solution
Ahmadein, M., Wu, M., Stefan Kharicha, M., Kharicha, A. & Ludwig, A., 2013.
Research output: Contribution to conference › Poster › Research › peer-review
Published
Exploration of the double-diffusive convection during dendritic solidification with a combined volume-averaging and cellular-automaton model
Stefan-Kharicha, M., Wu, M., Ludwig, A. & Kharicha, A., 2013, McWASP XIII. p. 1-1
Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
Published
Final Report on project "Metastable Solidification of Novel Peritectic Structures-Studies with Transparent Model Alloys: ISS Flieght Preparation
Mogeritsch, J. & Ludwig, A., 2013
Research output: Book/Report › Commissioned report › Transfer › peer-review
Published
Final Report on the short-term project "Simulation of solidification and macrosegregation in large round ingots produced by vertical continuous casting
Li, J., Wu, M. & Ludwig, A., 2013
Research output: Book/Report › Commissioned report › Transfer › peer-review
Published
Half year report: Characterisation and Optimisation of the Electrolyte Flow in Conventional Tankhouse Cells
Kemminger, A. & Ludwig, A., 2013
Research output: Book/Report › Commissioned report › Transfer › peer-review
Published
Half Year Report Q1-2/2013 "Numerical and experimental study of Horizontal Centrifugal Casting"
Bohacek, J., Kharicha, A. & Ludwig, A., 2013
Research output: Book/Report › Commissioned report › Transfer › peer-review
Published
Metastable Solidification of Novel Peritectic Structures – Studies With Transparent Model Alloys: ISS Flight Preparation
Mogeritsch, J. & Ludwig, A., 2013, ASAP Success Stories der 7. und 8. Ausschreibung. p. 37-37
Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research
Published
“MHD and multiphase phenomena in an industrial scale electro-slag remelting process”
Kharicha, A., Wu, M. & Ludwig, A., 2013, “MHD and multiphase phenomena in an industrial scale electro-slag remelting process”.
Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
Published
"MHD in electric current-induced flow"
Kharicha, A., Wu, M. & Ludwig, A., 2013
Research output: Book/Report › Commissioned report › Transfer › peer-review
Published
"MHD instabilities of bath/liquid metal interface”
Kharicha, A., Ludwig, A. & Wu, M., 2013, "MHD instabilities of bath/liquid metal interface”.
Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
Published
"Minutes of the autumn meeting on project "Importance of Hydrodynamics In Peritectic Steel Thin Slab Casting"
Vakhrushev, A., Ludwig, A. & Wu, M., 2013
Research output: Book/Report › Commissioned report › Transfer › peer-review
Published
"Minutes of the fall meeting on project "Electromagnetic processing of dual-phase fluids"
Karimi Sibaki, E., Wu, M. & Ludwig, A., 2013
Research output: Book/Report › Commissioned report › Transfer › peer-review
Published
Minutes of the Sponsor group meeting of the research project: Characterisation and Optimisation of the Electrolyte Flow in Conventional Tankhouse Cells
Kemminger, A. & Ludwig, A., 2013
Research output: Book/Report › Commissioned report › Transfer › peer-review
Published
Minutes of the spring meeting on project "Electromagnetic processing of dual-phase fluids"
Karimi Sibaki, E., Wu, M. & Ludwig, A., 2013
Research output: Book/Report › Commissioned report › Transfer › peer-review
Published
Minutes of the spring meeting on project "Importance of Hydrodynamics in Peritectic Steel Thin Slab Casting"
Vakhrushev, A., Ludwig, A. & Wu, M., 2013
Research output: Book/Report › Commissioned report › Transfer › peer-review
Published
Minutes of the spring meeting on project "Numerical and experimental study of Horizontal Centrifugal Casting"
Bohacek, J., Kharicha, A. & Ludwig, A., 2013
Research output: Book/Report › Commissioned report › Transfer
Published
Minutes of the summer meeting on project "Electromagnetic processing of dual-phase fluids"
Karimi Sibaki, E., Wu, M. & Ludwig, A., 2013
Research output: Book/Report › Commissioned report › Transfer
Published
Minutes of the winter meeting on project "Importance of Hydrodynamics in PEritectic Steek Thin Slab Casting"
Vakhrushev, A., Ludwig, A. & Wu, M., 2013
Research output: Book/Report › Commissioned report › Transfer
Published
Modeling of the flow-solidification interaction in thin slab casting
Vakhrushev, A., Wu, M., Ludwig, A., Tang, Y., Hackl, G. & Nitzl, G., 2013, McWASP XIII. p. 1-1
Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
Published
Modeling the effect of strand surface bulging and mechanical softreduction on the macrosegregation formation in steel continuous casting
Domitner, J., Wu, M., Kharicha, A., Ludwig, A., Kaufmann, B., Reiter, J. & Schaden, T., 2013, In: Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science.
Research output: Contribution to journal › Article › Research › peer-review
Published
Modelling diffusion-governed solidification of ternary alloys - Part 1: Coupling solidification kinetics with thermodynamics
Wu, M., Li, J., Ludwig, A. & Kharicha, A., 2013, In: Computational materials science. 79, p. 830-840
Research output: Contribution to journal › Article › Research › peer-review
Published
Modelling macrosegregation in a 2.45 ton steel ingot
Li, J., Wu, M., Ludwig, A. & Kharicha, A., 2013, McWASP XIII. p. 1-1
Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
Published
Numerical investigation of shell formation in thin slab casting of funnel-type mould
Vakhrushev, A., Wu, M., Ludwig, A., Tang, Y., Hackl, G. & Nitzl, G., 2013, In: Metallurgical and Materials Transactions B: Process Metallurgy and Materials Processing Science.
Research output: Contribution to journal › Article › Research › peer-review
Published
"Numerical modeling of centrifugal casting: FLUENT vs. own code in MATLAB"
Bohacek, J., Kharicha, A., Ludwig, A. & Wu, M., 2013
Research output: Book/Report › Commissioned report › Transfer › peer-review
Published
"Numerical study of horizontal centrifugal casting of HSS work roll"
Bohacek, J., Ludwig, A. & Kharicha, A., 2013, "Numerical study of horizontal centrifugal casting of HSS work roll".
Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
Published
"Optimization and Modelling of the Electrolyte Flow in a Conventional Copper Electrorefining Cell"
Kemminger, A. & Ludwig, A., 2013
Research output: Book/Report › Commissioned report › Transfer › peer-review
Published
Preparation of Insitu-Observations of Isothermal Coupled Peritectic Growth on Board of the ISS
Ludwig, A. & Mogeritsch, J., 2013, Symposium on "Materials Research in Microgravity. p. 1-1
Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
Published
Shallow Water Model for Horizontal Centrifugal Casting
Bohacek, J., Kharicha, A., Ludwig, A. & Wu, M., 2013, McWASP XIII. p. 1-1
Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
Published
Simulation of macrosegregation in a 2.45-ton steel ingot using a three-phase mixed columnar-equiaxed model
Li, J., Wu, M., Ludwig, A. & Kharicha, A., 2013, In: International journal of heat and mass transfer. 72.2014, May, p. 668-679 12 p.
Research output: Contribution to journal › Article › Research › peer-review
Published
Simulation of the voltage signal during the formation and the departure of a droplet in the electro-slag Remelting process
Kharicha, A., Wu, M. & Ludwig, A., 2013, In: International journal of thermal sciences.
Research output: Contribution to journal › Article › Research › peer-review
Published
Simulation results report "Simulation of the beam blank casting" for RHI "Importance of Hydrodynamics in Peritectic Steel Thin Slab Casting"
Vakhrushev, A., Ludwig, A. & Wu, M., 2013
Research output: Book/Report › Commissioned report › Transfer
Published
“Simultaneous observation of melt flow and motion of equiaxed crystals during solidification using a dual phase Particle Image Velocimetry technique. Part I
Kharicha, A., Stefan Kharicha, M., Ludwig, A. & Wu, M., 2013, In: Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science. 44, p. 650-660
Research output: Contribution to journal › Article › Research › peer-review
Published
“Simultaneous observation of melt flow and motion of equiaxed crystals during solidification using a dual phase Particle Image Velocimetry technique. Part II
Kharicha, A., Stefan Kharicha, M., Ludwig, A. & Wu, M., 2013, In: Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science. 44, p. 661-668
Research output: Contribution to journal › Article › Research › peer-review
Published
Simultaneous observation of melt flow and motion of equiaxed crystals during solidification using a dual phase PIV technique
Kharicha, A., Stefan Kharicha, M., Ludwig, A. & Wu, M., 2013, McWASP XIII. p. 1-1
Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
Published
"Using a Three Phase Mixed Columnar-Equiaxed Solidification Model to Study Macrosegregation in Ingot Casting: Perspectives and Limitations"
Wu, M., Kharicha, A. & Ludwig, A., 2013, "Using a Three Phase Mixed Columnar-Equiaxed Solidification Model to Study Macrosegregation in Ingot Casting: Perspectives and Limitations". p. 171-180
Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
Published
"Variation of the Resistance During the Elektrode Movement in the Electroslag Remelting Process"
Kharicha, A., Wu, M. & Ludwig, A., 2013, "Variation of the Resistance During the Elektrode Movement in the Electroslag Remelting Process". p. 145-150
Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
2012
Published
Thermodynamic description of the system Cu-Sn-P experimental and numerical investigation
Grasser, M., Ludwig, A. & Schillinger, W., 3 Dec 2012, In: International journal of materials research : IJMR ; Zeitschrift für Metallkunde. 103, 11, p. 1312-1318 7 p.
Research output: Contribution to journal › Article › Research › peer-review
Published
Preface - 13th International Conference on Modeling of Casting, Welding and Advanced Solidification Processes, MCWASP 2012; Schladming; Austria; 17 June 2012 through 22 June 2012
Ludwig, A., 1 Dec 2012, In: IOP Conference Series: Materials Science and Engineering. 33, 1, 011002.
Research output: Contribution to journal › Editorial › peer-review
Published
Advanced solidification studies on transparent alloy systems: A new european solidification insert for material science glovebox on board the international space station
Ludwig, A., Mogeritsch, J., Kolbe, M., Zimmermann, G., Sturz, L., Bergeon, N., Billia, B., Faivre, G., Akamatsu, S., Bottin-Rousseau, S. & Voss, D., 1 Sept 2012, In: JOM. 64, 9, p. 1097-1101 5 p.
Research output: Contribution to journal › Article › Research › peer-review
Published
Modeling of Multiscale and Multiphase Phenomena in Material Processing
Ludwig, A., Kharicha, A. & Wu, M., 15 May 2012, CFD Modeling and Simulation in Materials Processing - Held During the TMS 2012 Annual Meeting and Exhibition. p. 147 - 161
Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
Published
Vibrations induced flow in a horizontal centrifugal casting
Kharicha, A., Bohacek, J., Ludwig, A. & Wu, M., 15 May 2012, CFD Modeling and Simulation in Materials Processing - Held During the TMS 2012 Annual Meeting and Exhibition. Orlando: TMS, p. 227-234 8 p.
Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
Published
Vibrations Induced Flow in a Horizontal Centrifugal Casting
Kharicha, A., Bohacek, J., Ludwig, A. & Wu, M., 15 May 2012, CFD Modeling and Simulation in Materials Processing. John Wiley & Sons Ltd, p. 227-234 8 p.
Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research
Published
Advanced Multiphase Modeling of Solidification with OpenFOAM®
Vakhrushev, A., Ludwig, A., Wu, M., Tang, Y., Hackl, G. & Nitzl, G., 2012, Open Source CFD International Conference 2012. p. 1-18
Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
Published
Adv. Solidification Studies on Transparent Alloy Systems: A New European Solidification Insert for Material Science Glovebox on Board the Int. Space Station
Ludwig, A. & Mogeritsch, J., 2012, In: JOM. p. 1097-1101
Research output: Contribution to journal › Article › Research › peer-review
Published
Experimental investigation on the ternary phase diagram Cu-Sn-P
Ludwig, A., Grasser, M. & Schillinger, W., 2012, In: World of metallurgy - Erzmetall : internationale Fachzeitschrift für Metallurgie. 65, p. 117-125
Research output: Contribution to journal › Article › Research › peer-review
Published
Influence of the earth magnetic field on electrically induced flows
Kharicha, A., Wu, M., Ludwig, A. & Karimi Sibaki, E., 2012, In: Journal of iron and steel research international. 19, p. 63-66
Research output: Contribution to journal › Article › Research › peer-review
Published
Influence of the frequency of the applied AC current on the electroslag remelting process
Kharicha, A., Wu, M., Ludwig, A., Ramprecht, M. & Holzgruber, H., 2012, CFD Modeling and Simulation in Materials Processing: Proceedings of a symposium sponsored by Association for Iron and Steel Technology and the Process Technology and Modeling Committee of the Extraction and Processing Division and the Solidification Committee of the Materials Processing and Manufacturing Division of TMS (The Minerals, Metals & Materials Society) Held during the TMS 2012 Annual Meeting & Exhibition Orlando, Florida, USA March 11-15, 2012. p. 139-146
Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
Published
Investigations on the origin of radial distribution of non-metallic inclusions in ESR ingot
Kharicha, A., Körp, J., Kubin, M., Wu, M. & Ludwig, A., 2012, CLEANSTEEL8. p. 145-157
Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
Published
Jahresbericht CD-Labor für Prozesssimulation von Erstarrungs-und Umschmelzvorgängen Modul I
Vakhrushev, A., Wu, M. & Ludwig, A., 2012
Research output: Book/Report › Commissioned report › Transfer › peer-review
Published
Jahresbericht CD-Labor für Prozesssimulation von Erstarrungs-und Umschmelzvorgängen Modul II
Karimi Sibaki, E., Wu, M. & Ludwig, A., 2012
Research output: Book/Report › Commissioned report › Transfer › peer-review
Published
Jahresbericht MCL Projekt A1.1.
Domitner, J., Hölzl, C., Ludwig, A. & Wu, M., 2012
Research output: Book/Report › Commissioned report › Transfer › peer-review
Published
Jahresbericht MCL Projekt A1.2.
Bohacek, J., Ludwig, A. & Wu, M., 2012
Research output: Book/Report › Commissioned report › Transfer › peer-review
Published
Jahresbericht MCL Projekt A1.4
Unterreiter, G. & Ludwig, A., 2012
Research output: Book/Report › Commissioned report › Transfer › peer-review
Published
Jahresbericht Quench-IT
Unterreiter, G. & Ludwig, A., 2012
Research output: Book/Report › Commissioned report › Transfer › peer-review
Published
Microstructure formation in the two phase region of the binary peritectic organic system TRIS-NPG
Mogeritsch, J. & Ludwig, A., 2012, Materials Research in Microgravity 2012. p. 48-55
Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
Published
Modeling of multiphase and multiscale phenomena in materials processing
Ludwig, A., Kharicha, A. & Wu, M., 2012, CFD Modeling and Simulation in Materials Processin. p. 149-161
Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research
Published
Multiphase modelling of the macrosegregation in ingot castings
Wu, M., Li, J., Kharicha, A. & Ludwig, A., 2012, ICRF-2012. p. 1-10
Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
Published
Numerical study of the influence of mold filling conditions on the as-cast structure of Al-4 wt.% Cu ingots
Ahmadein, M., Kharicha, A. & Ludwig, A., 2012, International Conf. on Engineering and Technology. p. 1-6
Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
Published
Simulation of channel segregation using a two-phase columnar solidification model, Part II: Mechanism and parameter study
Li, J., Wu, M., Hao, J., Kharicha, A. & Ludwig, A., 2012, In: Computational materials science. 55, p. 419-429
Research output: Contribution to journal › Article › Research › peer-review
Published
Simulation of channel segregation using a two-phase columnar solidification model, Part I: Model description and verification
Li, J., Wu, M., Hao, J. & Ludwig, A., 2012, In: Computational materials science. 55, p. 407-418
Research output: Contribution to journal › Article › Research › peer-review
Published
Simulation of the as-cast structure of Al-4.0wt.%Cu ingots with a 5-phase mixed columnar-equiaxed solidification model
Wu, M., Ahmadein, M., Kharicha, A. & Ludwig, A., 2012, McWASP XIII. p. 1-8
Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
Published
Thermodynamic description of the system Cu-Sn-P: experimental and numerical invigation
Grasser, M., Ludwig, A. & Schillinger, W., 2012, In: International journal of materials research : IJMR ; Zeitschrift für Metallkunde. 103, p. E1-7
Research output: Contribution to journal › Article › Research › peer-review
Published
Thermo-mechanical modeling of dendrite deformation in continuous casting of steel
Domitner, J., Drezet, J.-M., Wu, M. & Ludwig, A., 2012.
Research output: Contribution to conference › Poster › Research › peer-review
Published
Thermo-mechanical modeling of dendrite deformation in continuous casting of steel
Domitner, J., Drezet, J.-M., Wu, M. & Ludwig, A., 2012, IOP Conf. Series: Materials Science and Engineering. p. 012058-1-012058-8
Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
Published
Using a two-phase columnar solidification model to study the principle of mechanical softreduction in slab casting
Wu, M., Domitner, J. & Ludwig, A., 2012, In: Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science. 43, p. 945-964
Research output: Contribution to journal › Article › Research › peer-review
Published
Vibration induced flow in a horizontal centrifugal casting
Kharicha, A., Bohàcek, J., Ludwig, A. & Wu, M., 2012, Symposium on "CFD and Simulation in Materials Processing". p. 227-234
Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
Published
Vibration induced flow in a horizontal centrifugal casting
Kharicha, A., Bohacek, J., Ludwig, A. & Wu, M., 2012, CFD Modeling and Simulation in Materials Processing. p. 227-234
Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research
2011
Published
Simulation of the Deformation of a Flexible Combo Bag in a DC Aluminium Casting
Kharicha, A., Ludwig, A. & Wu, M., 20 Apr 2011, Supplemental Proceedings: Materials Fabrication, Properties, Characterization, and Modeling. Vol. 2. p. 273-278 6 p.
Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research
Published
Solidification simulation and macrosegregation prediction in DC casting of bronze alloys
Hao, J., Grasser, M. & Ludwig, A., 1 Mar 2011, In: World of metallurgy - Erzmetall : internationale Fachzeitschrift für Metallurgie. 64, 2, p. 71-78 8 p.
Research output: Contribution to journal › Article › Research › peer-review
Published
Numerical study and experimental investigation of solidification phenomena in semi-continuous casting of Bronze
Hao, J., Grasser, M., Wu, M. & Ludwig, A., 11 Jan 2011, Materials Processing Technologies. p. 1401-1404 4 p. (Advanced Materials Research; vol. 154-155).
Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
Published
3D simulation of interdendritic flow through a Al-18wt.%Cu structure captured with X-ray microtomography
Domitner, J., Hölzl, C., Kharicha, A., Wu, M., Ludwig, A., Köhler, M. & Ratke, L., 2011, IOP Conf. Series: Materials Science and Engineering. p. 012016-1-012016-6
Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
Published
3D simulation of interdendritic flow through a Al-18wt.%Cu structure captured with X-ray microtomography
Domitner, J., Hölzl, C., Kharicha, A., Wu, M., Ludwig, A., Köhler, M. & Ratke, L., 2011.
Research output: Contribution to conference › Poster › Research › peer-review
Published
3d simulation of the electro-slag remelting process
Kharicha, A., Ludwig, A. & Wu, M., 2011, Proceeding of the TMS Annual Meeting. p. 1-6
Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
Published
3D simulation of the melting during an electro-slag remelting process
Kharicha, A., Ludwig, A. & Wu, M., 2011, Int. Symp. on Liquid Metal Processing and Casting (LMPC-11). p. 41-48
Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
Published
A 3-phase model for mixed columnar-equiaxed solidification in DC casting of bronze
Hao, J., Grasser, M., Wu, M., Ludwig, A., Riedle, J. & Eberle, R., 2011, IOP Conf. Series: Mater. Sci. Eng., vol. 27. p. 1-6
Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
Published
A numerical study on the principle of mechanical softreduction for reducing the centreline segregation in slab casting
Wu, M., Domitner, J., Ludwig, A. & Mayer, F., 2011, Proceedings of the 4rd Int. Conf. Simulation and Modeling in Metallurgical Processes in Steelmaking (STEELSIM 2011). p. 4.1-11
Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
Published
Coupling the turbulent flow with the solidification processes in OpenFOAM®
Wu, M., Ludwig, A., Vakhrushev, A., Tang, Y., Nitzl, G. & Hackl, G., 2011, Proceedings of Open Source CFD Int. Conf. 2011. p. 1-21
Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
Published
Droplet formation in small electroslag remelting processes
Kharicha, A., Ludwig, A. & Wu, M., 2011, Int. Symp. on Liquid Metal Processing and Casting (LMPC-11). p. 113-119
Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
Published
Evaluation of a mixed columnar-equiaxed solidification model with laboratory castings
Wu, M., Nunner, G., Ludwig, A., Li, J. & Schumacher, P., 2011, IOP Conf. Series: Mater. Sci. Eng., vol. 27. p. 1-7
Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
Published
In-situ observation of coupled growth morphologies in organic peritectics
Mogeritsch, J. & Ludwig, A., 2011, IOP Conf. Series: Mater. Sci. Eng.. Vol. 27. p. 012028-012032
Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
Published
In-situ Observation of Coupled Peritectic Growth
Ludwig, A. & Mogeritsch, J., 2011, Solidification Science and Technology: Proceedings of the John Hunt International Symposium. p. 233-242
Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
Published
Jahresbericht CD-Labor für Mehrphasensimulation met. Prozesse
Ludwig, A., 2011
Research output: Book/Report › Commissioned report › Transfer › peer-review
Published
Liquid metal inside a horizontally rotating cylinder under vibrations
Bohàcek, J., Kharicha, A., Ludwig, A. & Wu, M., 2011, Proceedings of Experimental Fluid Mechanics (EFM 2011). p. 564-573
Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
Published
Modeling of Heat Transfer and Solidification Processes in Thin Slab Caster
Vakhrushev, A., Ludwig, A., Wu, M., Tang, Y., Nitzl, G. & Hackl, G., 2011, European Continous Casting Conference ECCC 2011. p. 1-10
Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
Published
Modeling of nonmetallic inclusions and gas bubbles motion in continuous caster
Vakhrushev, A., Ludwig, A., Wu, M., Tang, Y., Nitzl, G. & Hackl, G., 2011, Proceedings of the 4rd Int. Conf. Simulation and Modeling in Metallurgical Processes in Steelmaking (STEELSIM 2011). p. 17.1-8
Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
Published
Modeling the Formation and the Reduction of Macrosegregation in Continuously Cast Steel Slabs
Domitner, J., Wu, M., Mayer, F., Ludwig, A., Kaufmann, B., Reiter, J. & Schaden, T., 2011, Proceedings of the 7th European Continuous Casting Conference (ECCC 2011). p. 6.1-6.8
Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
Published
Numerical microstructure prediction for an aluminium casting and its experimental validation
Unterreiter, G., Ludwig, A. & Wu, M., 2011, In: China Foundry. 8, 3, p. 331-336
Research output: Contribution to journal › Article › Research › peer-review
Published
Numerical Study and experiment investigation of solidification phenomena in semi-continuous casting of Bronze
Hao, J., Grasser, M., Wu, M. & Ludwig, A., 2011, In: Advanced materials. 154-155, p. 1401-1414
Research output: Contribution to journal › Article › Research › peer-review
Published
Numerical Study of the Thermosolutal Convection Induced Macrosegregation during Colummar Solidification
Hao, J., Wu, M., Ludwig, A. & Grasser, M., 2011, In: Advanced materials. 154-155, p. 1415-1418
Research output: Contribution to journal › Article › Research › peer-review
Published
Simulation of the deformation of a flexible combo bag in a DC aluminium casting
Kharicha, A., Ludwig, A. & Wu, M., 2011, Proceeding of TMS Annual Meeting. p. 1-8
Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
Published
Simulation of the melting of a flat electrode during an elektroslag remelting process
Kharicha, A., Ludwig, A. & Wu, M., 2011, Proceedings of the 4rd Int. Conf. Simulation and Modeling in Metallurgical Processes in Steelmaking (STEELSIM 2011). p. 19.1-5
Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
Published
Spatio-temporal variation of the electromagnetic field during the electroslag remelting process
Kharicha, A., Ludwig, A. & Wu, M., 2011, 8th Int. Pamir Conf. on Fund. and Applied MHD (PAMIR). p. 695-699
Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
Published
Study of the channel segregation using a two-phase columnar solidification model
Li, J., Wu, M., Hao, J. & Ludwig, A., 2011, IOP Conf. Series: Mater. Sci. Eng., vol. 27. p. 1-7
Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
Published
Thermal state of the electrode during the electro-slag remelting process
Kharicha, A., Ludwig, A. & Wu, M., 2011, Liquid Metal Processing and Casting. p. 113-119
Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
Published
Through-process simulation of aluminium casting A356-simulation of solidification and stress analysis during heat treatment
Unterreiter, G., Wlanis, T., Ludwig, A., Wu, M., Sommitsch, C. & Mayer, F., 2011, In: International journal of multiphysics. p. 209-217
Research output: Contribution to journal › Article › Research › peer-review
2010
Published
3-D microprobe analysis of dendritic structures in steel
Domitner, J., Kharicha, A., Ludwig, A. & Grasser, M., 30 Nov 2010, AIST Steel Properties and Applications Conference Proceedings - Combined with MS and T'10, Materials Science and Technology 2010. p. 735-743 9 p.
Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
Published
Modelling mixed columnar-equiaxed solidification with melt convection and grain sedimentation - Part I: Model description
Wu, M., Fjeld, A. & Ludwig, A., 1 Nov 2010, In: Computational materials science. 50, 1, p. 32-42 11 p.
Research output: Contribution to journal › Article › Research › peer-review
Published
Modelling mixed columnar-equiaxed solidification with melt convection and grain sedimentation - Part II: Illustrative modelling results and parameter studies
Wu, M., Ludwig, A. & Fjeld, A., 1 Nov 2010, In: Computational materials science. 50, 1, p. 43-58 16 p.
Research output: Contribution to journal › Article › Research › peer-review
Published
Simulation and modelling of metallurgical processes in steelmaking
Ludwig, A., 1 Aug 2010, In: Steel research international. 81, 8, 1 p.
Research output: Contribution to journal › Editorial › peer-review
Published
3D Microprobe Analysis of Dendritic Structures in Steel
Domitner, J., Kharicha, A., Ludwig, A. & Grasser, M., 2010, Proceedings of the International Conference on Materials Science & Technology (MS&T'10)
. p. 908-916
Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
Published
A Method for the Reconstruction of Three-Dimensional Dendritic Structures in Steel Considering Their Changing Shape during Solidification
Ludwig, A., Kharicha, A. & Domitner, J., 2010, A Method for the Reconstruction of Three-Dimensional Dendritic Structures in Steel Considering Their Changing Shape during Solidification. p. 908-916
Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
Published
Columnar to Equiaxed Transition During Ingot Casting Using Ternary Alloy Composition
Könözsy, L., Ishmurzin, A., Grasser, M., Wu, M., Ludwig, A., Tanzer, R. & Schützenhöfer, W., 2010, In: Materials Science Forum. 649, p. 349-354
Research output: Contribution to journal › Article › Research › peer-review
Published
Erstarrungssimulation im Strangguss von Bronze zur Bestimmung von Makroseigerungseffekten
Hao, J., Wu, M., Ludwig, A., Riedle, J. & Eberle, R., 2010, DGM JSymposium Stranggiessen 2010, ed. H.R Müller, Werkstoffinformationsgesellschaft. p. 99-104
Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
Published
Experimental Investigation on the Ternary Phase Diagram Cu-Sn-P
Grasser, M., Ludwig, A. & Schillinger, W., 2010, Copper 2010. p. 49-64
Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
Published
Importance of Melt Flow in Solidifying Mushy Zone
Wu, M., Vakhrushev, A., Nunner, G., Pfeiler, C., Kharicha, A. & Ludwig, A., 2010, In: The open transport phenomena journal . 5, 2, p. 16-23
Research output: Contribution to journal › Article › Research › peer-review
Published
Influence of an imposed vertical current on the droplet formation during a melting process
Kharicha, A. & Ludwig, A., 2010, Influence of an imposed vertical current on the droplet formation during a melting process. p. 1-5
Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
Published
Influence of the slag/pool interface on the solidification in an electroslag remelting process
Kharicha, A., Schuetzenhoefer, W., Ludwig, A. & Reiter, G., 2010, In: Materials Science Forum. p. 229-236
Research output: Contribution to journal › Article › Research › peer-review
Published
In situ observation of solidification in an organic peritectic alloy system
Mogeritsch, J., Eck, S., Grasser, M. & Ludwig, A., 2010, In: Materials Science Forum. p. 159-164
Research output: Contribution to journal › Article › Research › peer-review
Published
Interaction of a Flexible Combo Bag with the Flow in a DC Aluminium Casting DGM
Kharicha, A., Ludwig, A. & Wu, M., 2010, Symposium Stranggiessen 2010.
Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
Published
Jahresbericht CD-Labor für Mehrphasensimulation met. Prozesse
Ludwig, A., 2010
Research output: Book/Report › Commissioned report › Transfer › peer-review
Published
Macrosegregation Prediction for DC Casting of Ternary Bronze Alloys
Hao, J., Grasser, M., Wu, M., Ludwig, A., Riedle, J. & Eberle, R., 2010, Copper. p. 65-80
Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
Published
Method for a through-process simulation of an aluminium casting
Unterreiter, G., Ludwig, A., Wu, M., Wlanis, T., Sommitsch, C. & Mayer, F., 2010, Method for a through-process simulation of an aluminium casting. p. 1-9
Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
Published
Modeling mixed columnar-equiaxed solidification with melt convection and grain sedimentation-Part II: Illustrative modeling results and parameter studies
Wu, M., Ludwig, A. & Fjeld, A., 2010, In: Computational materials science. 50, p. 32-42
Research output: Contribution to journal › Article › Research › peer-review
Published
Modeling mixed columnar-equiaxed solidification with melt convection and grain sedimentation-Part I: Model description
Wu, M., Fjeld, A. & Ludwig, A., 2010, In: Computational materials science. 50, p. 43-58
Research output: Contribution to journal › Article › Research › peer-review
Published
Modeling of Turbulent Melt Flow and Solidification Processes in Steel Continuous Caster with the Open Source Software Package OpenFOAM
Vakhrushev, A., Ludwig, A., Wu, M., Tang, Y., Nitzl, G. & Hackl, G., 2010, Open Source CFD Int. Conf. 2010.
Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
Published
Numerical and Experimental Investigation of NH4Cl Solidification
Könözsy, L., Stefan Kharicha, M., Eck, S., Wu, M. & Ludwig, A., 2010, In: Materials Science Forum. 649, p. 367-372
Research output: Contribution to journal › Article › Research › peer-review
Published
On the Formation of Centreline Segregation in Continuous Slab Casting of Steel due to Bulging and/or Feeding
Mayer, F., Wu, M. & Ludwig, A., 2010, In: Steel research international. 81, p. 660-667
Research output: Contribution to journal › Article › Research › peer-review
Published
Reconstruction of Three-Dimensional Dendritic Structures Based on the Investigation of Microsegregation Patterns
Domitner, J., Kharicha, A., Grasser, M. & Ludwig, A., 2010, In: Steel research international. 81, p. 644-651
Research output: Contribution to journal › Article › Research › peer-review
2009
Published
Numerical and experimental investigations on the ESR process of the hot work tool steel H11
Kharicha, A., Schützenhöfer, W., Ludwig, A. & Tanzer, R., 1 Dec 2009, LMPC 2009 - Proceedings of the International Symposium on Liquid Metal Processing and Casting. p. 235-242 8 p.
Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
Published
An idea to treat the dendritic morphology in mixed columnar-equiaxed solidification
Wu, M. & Ludwig, A., 4 Nov 2009, In: International journal of cast metals research. 22, 1-4, p. 323-326 4 p.
Research output: Contribution to journal › Article › Research › peer-review
Published
Flow patterns and re-melting during filling of a large composite casting
Fjeld, A. & Ludwig, A., 4 Nov 2009, In: International journal of cast metals research. 22, 1-4, p. 111-114 4 p.
Research output: Contribution to journal › Article › Research › peer-review
Published
Reformulation of time averaged Joule heating in presence of temperature fluctuations
Kharicha, A., Schützenhöfer, W., Ludwig, A., Tanzer, R. & Wu, M., 4 Nov 2009, In: International journal of cast metals research. 22, 1-4, p. 155-159 5 p.
Research output: Contribution to journal › Article › Research › peer-review
Published
Modeling equiaxed solidification with melt convection and grain sedimentation-I: Model description
Wu, M. & Ludwig, A., 1 Nov 2009, In: Acta Materialia. 57, 19, p. 5621-5631 11 p.
Research output: Contribution to journal › Article › Research › peer-review
Published
Modeling equiaxed solidification with melt convection and grain sedimentation-II. Model verification
Wu, M. & Ludwig, A., 1 Nov 2009, In: Acta Materialia. 57, 19, p. 5632-5644 13 p.
Research output: Contribution to journal › Article › Research › peer-review
Published
Experimental and numerical modeling of the flow field in an industrial bronze caster - Improving the numerical model
Eck, S., Pfeiler, C., Kharicha, A., Ludwig, A. & Evans, J. W., 24 Jun 2009, TMS Annual Meeting. p. 635-642 8 p.
Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
Published
Thermal stability of a binary non-faceted/non-faceted peritectic organic alloy at elevated temperatures
Mogeritsch, J. P., Ludwig, A., Eck, S., Grasser, M. & McKay, B. J., 1 May 2009, In: Scripta materialia. 60, 10, p. 882-885 4 p.
Research output: Contribution to journal › Article › Research › peer-review
Published
Measurement of the Solid-Liquid Interface Energy in Ternary Alloy Systems
Bulla, A., Subasic, E., Berger, R., Bührig-Polaczek, A. & Ludwig, A., 26 Mar 2009, Phase Transformations in Multicomponent Melts. John Wiley & Sons Ltd, p. 73-86 14 p.
Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research
Published
2nd International Conference on Advances in Solidification Processes ICASP-2, 17-20 June 2008, Seggau Castle, Graz, Austria Preface
Schumacher, P., McKay, B., Eck, S. & Ludwig, A., 2009, In: International journal of cast metals research. 22, p. 1-1
Research output: Contribution to journal › Article › Research › peer-review
Published
An Idea to Treat the Dendritic Morphology in the Mixed Columnar-Equiaxed Solidification
Wu, M. & Ludwig, A., 2009, In: International journal of cast metals research. 22, p. 323-327
Research output: Contribution to journal › Article › Research › peer-review
Published
Bulging vs. feeding, which mechanism dominates in regard to the formation of centerline segregation in steel continuous casting?
Mayer, F., Wu, M. & Ludwig, A., 2009, Bulging vs. feeding, which mechanism dominates in regard to the formation of centerline segregation in steel continuous casting?. ASMET, p. 247-252
Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
Published
Development of a Method for the Reconstruction of Three-Dimensional Dendritic Structures in Steel
Domitner, J., Fluch, J., Grasser, M. & Ludwig, A., 2009, Proceedings of the 3rd International Conference on Simulation and Modeling in Metallurgical Processes in Steelmaking (STEELSIM 2009). p. 128-134
Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
Published
Einfluss starker Konvektion während des Abfüllens in großindustriellen Gießereiprozessen
Fjeld, A. & Ludwig, A., 2009, In: Berg- und hüttenmännische Monatshefte : BHM.
Research output: Contribution to journal › Article › Research › peer-review
Published
Experimental and Numerical Investigations of NH4Cl Solidification in a Mould. Part 1: Experimental results
Stefan Kharicha, M., Eck, S., Könözsy, L., Kharicha, A. & Ludwig, A., 2009, In: International journal of cast metals research. 22, 1-4, p. 168 - 171 4 p.
Research output: Contribution to journal › Article › Research › peer-review
Published
Experimental and Numerical Investigations of NH4Cl Solidification in a Mould. Part 2: numerical results
Könözsy, L., Eck, S., Stefan Kharicha, M., Wu, M. & Ludwig, A., 2009, In: International journal of cast metals research. 22, 1-4, p. 172-174 3 p.
Research output: Contribution to journal › Article › Research › peer-review
Published
Experimental and Numerical Modelling of the Flow Field in a CuxSny Direct Chill Caster
Eck, S., Pfeiler, C., Mayer, F., Ludwig, A. & Evans, J. W., 2009, In: International journal of cast metals research. 22, p. 74-77
Research output: Contribution to journal › Article › Research › peer-review
Published
Flow Patterns and Re-melting during the Filling of a Large Composite Casting
Fjeld, A. & Ludwig, A., 2009, In: International journal of cast metals research. 22, p. 111-114
Research output: Contribution to journal › Article › Research › peer-review
Published
Influence of Strong Convection on Remelting and Species Transport in Composite Casting Processes
Fjeld, A. & Ludwig, A., 2009, Influence of Strong Convection on Remelting and Species Transport in Composite Casting Processes. ASMET, p. 292-297
Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
Published
In-situ Observation of Unsteady Peritectic Growth Modes
Ludwig, A., Mogeritsch, J. & Grasser, M., 2009, In: Transactions of the Indian Institute of Metals. p. 433-436
Research output: Contribution to journal › Article › Research › peer-review
Published
Jahresbericht CD-Labor für Mehrphasensimulation met. Prozesse
Ludwig, A., 2009
Research output: Book/Report › Commissioned report › Transfer › peer-review
Published
Macrosegregation Prediction for Ternary Bronze Alloys International Foundary Research
Grasser, M., Hao, J., Ishmurzin, A., Mayer, F., Wu, M., Ludwig, A., Hofmann, U. & Riedle, J., 2009, In: International foundry research (Giessereiforschung ; official journal of World Foundrymen Organization). 61, p. 42-45
Research output: Contribution to journal › Article › Research › peer-review
Published
Micro-Macrosegregation prediction based on solidification simulation for continuous casting of ternary bronze alloys
Grasser, M., Ishmurzin, A., Mayer, F., Wu, M., Ludwig, A., Hofmann, U. & Riedle, J., 2009, Modeling of casting, welding, and advanced solidification processes - XII. p. 221-228
Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research
Published
Microstructure Prediction Based on Ternary Solidification Simulation for Continuous Casting of Bronze
Grasser, M., Ishmurzin, A., Mayer, F., Wu, M., Ludwig, A., Hofmann, U. & Riedle, J., 2009, Modeling of casting, welding and advanced solidification processes XII: proceedings of the Tenth International Conference on Modeling of Casting, Welding and Advanced Solidification Processes held in Vancouver, BC, Canada on June 7 - 14, 2009 . Cockcroft, S. L. & Maijer, D. J. (eds.). Warrendale: TMS, p. 221-228
Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
Published
Modeling Equiaxed Solidification with Melt Convection and Grain Sedimentation, Part II: Model Verification
Wu, M. & Ludwig, A., 2009, In: Acta materialia. 57, p. 5632-5644
Research output: Contribution to journal › Article › Research › peer-review
Published
Modeling Equiaxed Solidification with Melt Convection and Grain Sedimentation, Part I: Model Description
Wu, M. & Ludwig, A., 2009, In: Acta materialia. 57, p. 5621-5631
Research output: Contribution to journal › Article › Research › peer-review
Published
Numerical and Experimental Investigation of NH4Cl Solidification in a Mould. Part 2: Numerical Results
Könözsy, L., Stefan Kharicha, M., Eck, S., Wu, M. & Ludwig, A., 2009, In: International journal of cast metals research. 22, p. 172-174
Research output: Contribution to journal › Article › Research › peer-review
Published
Numerical Investigation of Grid Influence for Formation of Macrosegregation
Könözsy, L., Ishmurzin, A., Mayer, F., Grasser, M., Wu, M. & Ludwig, A., 2009, In: International journal of cast metals research. 22, p. 175-178
Research output: Contribution to journal › Article › Research › peer-review
Published
Reformulation of the Time Averaged Joule Heating in the Presence of Temperature Fluctuations
Kharicha, A., Schützenhöfer, W., Ludwig, A., Tanzer, R. & Wu, M., 2009, In: International journal of cast metals research. 22, p. 155-159
Research output: Contribution to journal › Article › Research › peer-review
Published
Stability investigations of a binary organic alloy system with a peritectic phase diagram
Ludwig, A., Mogeritsch, J., Grasser, M., Eck, S. & McKay, B., 2009, In: Scripta materialia. p. 882-885
Research output: Contribution to journal › Article › Research › peer-review
Published
Study of centerline macrosegregation in steel continuous casting with a two-phase volume averaging approach
Ludwig, A., Mayer, F. & Wu, M., 2009, Study of centerline macrosegregation in steel continuous casting with a two-phase volume averaging approach. p. 279-286
Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
Published
Thermodynamic Description of the System Cu-Sn-P -Computational Thermodynamics and Experimental Investigation on the Systems CuSn and CuP
Grasser, M., Mayer, F. & Ludwig, A., 2009, Thermodynamic Description of the System Cu-Sn-P -Computational Thermodynamics and Experimental Investigation on the Systems CuSn and CuP. p. 47-54
Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
Published
The validation of a multiphase model for the macrosegregations and primary structure of high grade steel ingots
Tanzer, R., Schützenhöfer, W., Reiter, G., Fauland, H. P., Könözsy, L., Ishmurzin, A., Wu, M. & Ludwig, A., 2009, In: Metallurgical and Materials Transactions B: Process Metallurgy and Materials Processing Science. 40, p. 305-311
Research output: Contribution to journal › Article › Research › peer-review
Published
Using a Five-Phase Volume Averaging Approach to Model the Mixed Columnar-Equiaxed Solidification
Wu, M. & Ludwig, A., 2009, Using a Five-Phase Volume Averaging Approach to Model the Mixed Columnar-Equiaxed Solidification. p. 537-544
Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
Published
Validation of a Multiphase Model for the Macrosegregation and Primary Structure of High Grade Steel Ingots
Ishmurzin, A., Tanzer, R., Schuetzenhoefer, W., Reiter, G., Fauland, H. P., Könözsy, L., Wu, M. & Ludwig, A., 2009, In: Metallurgical and Materials Transactions B: Process Metallurgy and Materials Processing Science. 40, p. 305-311
Research output: Contribution to journal › Article › Research › peer-review
Published
Verbesserte metallurgische Prozesse durch moderne Simulationstechnik
Odenthal, H. J., Rexroth, C. H., Sommerfeld, M., Ludwig, A., Baake, E. & Thess, A., 2009, In: Stahl und Eisen. 129, p. 37-46
Research output: Contribution to journal › Article › Research › peer-review
2008
Published
Jahresbericht CD-Labor für Mehrphasensimulation met. Prozesse
Ludwig, A., 2008
Research output: Book/Report › Commissioned report › Transfer › peer-review
Published
Modeling and Simulation of a Large Composite Casting
Autumn, F. & Ludwig, A., 2008, EPD Congress 2008. p. 281-291
Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
Published
Multiphase Flow Modeling and Its Application Potentials in Steel Continuous Casting
Ludwig, A., Wu, M., Pfeiler, C. & Mayer, F., 2008, Multiphase Flow Modeling and Its Application Potentials in Steel Continuous Casting. p. 30-37
Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
Published
Multiphase Flow Modeling and Its Application Potentials in Steel Continuous Casting
Wu, M., Ludwig, A., Pfeiler, C. & Mayer, F., 2008, In: Journal of iron and steel research international. 15, p. 30-37
Research output: Contribution to journal › Article › Research › peer-review
Published
Multiphase/multicomponent modeling of solidification processes: Coupling solidification kinetics with thermodynamics
Ishmurzin, A., Gruber-Pretzler, M., Mayer, F., Wu, M. & Ludwig, A., 2008, In: International journal of materials research : IJMR ; Zeitschrift für Metallkunde. 99.2008, 6, p. 618-625 8 p.
Research output: Contribution to journal › Article › Research › peer-review
Published
Numerical Modeling of the Effect of Global Transport Phenomena on the Microstructure Formation
Grasser, M., Mayer, F., Ishmurzin, A., Könözsy, L., Wu, M. & Ludwig, A., 2008, In: Berg- und hüttenmännische Monatshefte : BHM. 153, p. 278-281
Research output: Contribution to journal › Article › Research › peer-review
Published
On the Formation of Macrosegregations in Steel Ingot Castings
Wu, M., Könözsy, L., Ludwig, A., Schützenhöfer, W. & Tanzer, R., 2008, In: Steel research international. 79, p. 637-644
Research output: Contribution to journal › Article › Research › peer-review
Published
On the Importance of Electric Currents Flowing directly into the Mould during an ESR Process
Kharicha, A., Schützenhöfer, W., Ludwig, A., Tanzer, R. & Wu, M., 2008, In: Steel research international. 79, p. 632-636
Research output: Contribution to journal › Article › Research › peer-review
Published
Solidification and Particle Entrapment during Continuous Casting of Steel
Pfeiler, C., Thomas, B. G., Wu, M., Ludwig, A. & Kharicha, A., 2008, In: Steel research international. 79, p. 599-607
Research output: Contribution to journal › Article › Research › peer-review
2007
Published
Determination of the solid-liquid interface energy in the Al-Cu-Ag system
Bulla, A., Carreno-Bodensiek, C., Pustal, B., Berger, R., Bührig-Polaczek, A. & Ludwig, A., 1 Sept 2007, In: Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science. 38 A, 9, p. 1956-1964 9 p.
Research output: Contribution to journal › Article › Research › peer-review
Published
Using a three-phase deterministic model for the columnar-to-equiaxed transition
Wu, M. & Ludwig, A., 1 Jul 2007, In: Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science. 38 A, 7, p. 1465-1475 11 p.
Research output: Contribution to journal › Article › Research › peer-review
Published
Lead-free bearing alloys for engine applications results of the ESA-MAP project MONOPHAS
Ratke, L., Brück, S., Mathiesen, R., Ludwig, A., Gruber-Pretzler, M., Tonn, B., Gzovskyy, K., Gránásy, L., Tegze, G., Agren, J., Höglund, L., Arnberg, L., Gust, E., Anger, G., Lauer, M., Garen, R. & Reifenhäuser, B., 1 Apr 2007, In: Transactions of the Indian Institute of Metals. 60, 2-3, p. 103-111 9 p.
Research output: Contribution to journal › Article › Research › peer-review
Published
A Model for Equiaxed Dendritic Solidification with Melt Convection and Grain Sedimentation
Wu, M. & Ludwig, A., 2007, A Model for Equiaxed Dendritic Solidification with Melt Convection and Grain Sedimentation. p. 130-134
Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
Published
Combining Ternary Phase Diagram Information with Multiphase Solidification Simulations
Ludwig, A., Ishmurzin, A., Gruber-Pretzler, M., Mayer, F., Wu, M., Tanzer, R. & Schützenhöfer, W., 2007, Combining Ternary Phase Diagram Information with Multiphase Solidification Simulations. p. 493-496
Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
Published
Correct electric current paths in a multiphase process involving two phases with large difference in electric conductivity
Kharicha, A., Ludwig, A. & Wu, M., 2007, Correct electric current paths in a multiphase process involving two phases with large difference in electric conductivity.
Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
Published
Experimental and Numerical Modelling of Cu-Sn Casting with Adjustable Solidification Front
Eck, S., Ludwig, A., Mazumdar, D. & Evans, J. W., 2007, International Conference on Solidification Processing. p. 483-487
Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
Published
Interaction between steel droplets and slag in the ESR process
Kharicha, A., Schützenhöfer, W., Ludwig, A. & Tanzer, R., 2007, Interaction between steel droplets and slag in the ESR process. p. 113-119
Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
Published
Jahresbericht CD-Labor für Mehrphasensimulation met. Prozesse
Ludwig, A., 2007
Research output: Book/Report › Commissioned report › Transfer › peer-review
Published
Macrosegregation in Continuous Casting of Phosphor Bronze – Impact on Properties and Model-ing of Formation
Gruber-Pretzler, M., Mayer, F., Wu, M., Ludwig, A., Riedle, J. & Hofmann, U., 2007, Macrosegregation in Continuous Casting of Phosphor Bronze – Impact on Properties and Model-ing of Formation. p. 265-279
Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
Published
Modeling Equiaxed Dendritic Solidification with Melt Convection and Grain Sedimentation
Wu, M. & Ludwig, A., 2007, Xi'an International Symposium on Solidification (ISS07). p. 1-15
Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
Published
Multiphase Modelling of the Slag Region in the ESR Process
Kharicha, A., Schützenhöfer, W., Ludwig, A. & Tanzer, R., 2007, Multiphase Modelling of the Slag Region in the ESR Process. p. 107-111
Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
Published
Numerical Study of the Impact of Gravity and Marangoni force on the Droplet Distribution of Hypermonotectic AlBi Alloys
Gruber-Pretzler, M., Könözsy, L., Wu, M., Ludwig, A., Mathiesen, R. H., Schaffer, P. & Arnberg, L., 2007, Numerical Study of the Impact of Gravity and Marangoni force on the Droplet Distribution of Hypermonotectic AlBi Alloys. p. 249-253
Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
Published
Numerical Study of the Shrinkage Flow Induced Macrosegregation in Continuous Casting of Steel
Mayer, F., Gruber-Pretzler, M., Wu, M. & Ludwig, A., 2007, Numerical Study of the Shrinkage Flow Induced Macrosegregation in Continuous Casting of Steel. p. 265-270
Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
Published
On the Importance of the Electric Currents Flowing directly into the Mould during an ESR Process
Kharicha, A., Schützenhöfer, W., Ludwig, A., Tanzer, R. & Wu, M., 2007, On the Importance of the Electric Currents Flowing directly into the Mould during an ESR Process. p. 105-110
Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
Published
Parameter Study on the Formation of Macrosegregation in a Large Steel Ingot
Könözsy, L., Mayer, F., Ishmurzin, A., Wu, M., Ludwig, A., Tanzer, R. & Schützenhöfer, W., 2007, Parameter Study on the Formation of Macrosegregation in a Large Steel Ingot. p. 126-132
Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
Published
Particle Entrapment in the Mushy Region of a Steel Continuous Caster
Pfeiler, C., Thomas, B. G., Ludwig, A. & Wu, M., 2007, Particle Entrapment in the Mushy Region of a Steel Continuous Caster. p. 247-252
Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
Published
Selected Numerical Investigations on ESR Process
Kharicha, A., Mackenbrock, A., Ludwig, A., Schützenhöfer, W., Maronnier, V., Wu, M., Köser, O. & Tanzer, R., 2007, Selected Numerical Investigations on ESR Process. p. 113-119
Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
Published
The Validation of a Multiphase Model for the Macrosegregations and Primary Structure of High Grade Steel Ingots
Tanzer, R., Schützenhöfer, W., Reiter, G., Fauland, H. P., Könözsy, L., Ishmurzin, A., Wu, M. & Ludwig, A., 2007, The Validation of a Multiphase Model for the Macrosegregations and Primary Structure of High Grade Steel Ingots. p. 121-126
Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
Published
Understanding the Macrosegregation Formation in Steel Castings: Examples of Multiphase Modelling
Wu, M., Könözsy, L., Fjeld, A. & Ludwig, A., 2007, Understanding the Macrosegregation Formation in Steel Castings: Examples of Multiphase Modelling. p. 114-119
Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
Published
Using a Multiphase Approach to Study the Macrosegregation Formation Mechanisms
Wu, M., Könözsy, L., Fjeld, A. & Ludwig, A., 2007, Using a Multiphase Approach to Study the Macrosegregation Formation Mechanisms. p. 379-387
Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
Published
Using a Three-Phase Deterministic Model for the Columnar-to-Equiaxed Transition (CET)
Wu, M. & Ludwig, A., 2007, In: Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science. 38, p. 1465-1475
Research output: Contribution to journal › Article › Research › peer-review
2006
Published
A mixture two-phase model for predicting macrosegregations during solidification
Tang, Y., Wu, M. & Ludwig, A., 8 Dec 2006, Modeling of Casting, Welding and Advanced Solidification Processes - XI. Vol. 1. p. 283-290 8 p.
Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
Published
Control of interdendritic convection by the application of time-dependent magnetic fields during directional solidification of aluminium alloys
Hainke, M., Dagner, J., Wu, M. & Ludwig, A., 8 Dec 2006, Modeling of Casting, Welding and Advanced Solidification Processes - XI. Vol. 1. p. 317-324 8 p.
Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
Published
Modeling of macrosegregations in DC casting of Bronze
Gruber-Pretzler, M., Mayer, F., Wu, M., Ludwig, A., Kuhn, H. A. & Riedle, J., 8 Dec 2006, Modeling of Casting, Welding and Advanced Solidification Processes - XI. Vol. 2. p. 799-806 8 p.
Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
Published
Multiphase flow simulation of the cooling channel rheocasting process of A356 alloy
Wang, T., Pustal, B., Wu, M., Bührig-Polaczek, Ludwig, A., Yao, S., Hao, H., Li, T., Cao, Z., Zhang, X. & Jin, J., 8 Dec 2006, Modeling of Casting, Welding and Advanced Solidification Processes - XI. Vol. 2. p. 1071-1078 8 p.
Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
Published
Simulation of inclusion and bubble motion in a steel continuous caster
Pfeiler, C., Wu, M., Ludwig, A., Chimani, C., Watzinger, J. & Dösinger, H., 8 Dec 2006, Modeling of Casting, Welding and Advanced Solidification Processes - XI. Vol. 2. p. 737-744 8 p.
Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
Published
Volume averaging concept for mixed columnar-equiaxed solidification
Wu, M. & Ludwig, A., 8 Dec 2006, Modeling of Casting, Welding and Advanced Solidification Processes - XI. Vol. 1. p. 291-298 8 p.
Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
Published
Gravity-induced convection during directional solidification of hypermonotectic alloys
Ludwig, A., Wu, M., Abondano, M. & Ratke, L., 1 Dec 2006, Solidification and Gravity IV - Proceedings of the 4th International Conference on Solidification and Gravity. p. 193-198 6 p. (Materials Science Forum; vol. 508).
Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
Published
A three-phase model for mixed columnar-equiaxed solidification
Wu, M. & Ludwig, A., 1 May 2006, In: Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science. 37.2006, 5, p. 1613-1631 19 p.
Research output: Contribution to journal › Article › Research › peer-review
Published
A 3-Phase Model for Mixed Columnar-Equiaxed Solidification
Wu, M. & Ludwig, A., 2006, In: Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science. 37A, p. 1613-1631
Research output: Contribution to journal › Article › Research › peer-review
Published
About the formation of macrosegregations in continuous casting of Sn-Bronze
Ludwig, A., Gruber-Pretzler, M., Wu, M., Kuhn, A. & Riedle, J., 2006, In: Fluid Dynamics and Materials Processing. 1, p. 285-300
Research output: Contribution to journal › Article › Research › peer-review
Published
A Mixture Two-Phase Model for Macrosegregation during Solidification
Tang, Y., Wu, M. & Ludwig, A., 2006, A Mixture Two-Phase Model for Macrosegregation during Solidification. p. 283-290
Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
Published
A Mixture Two-Phase Model for Macrosegregation during Solidification
Tang, Y., Wu, M. & Ludwig, A., 2006.
Research output: Contribution to conference › Poster › Research › peer-review
Published
A Study of Macrosegregation Formation in Continuous Casting of a Technical CuSnP Bronze
Gruber-Pretzler, M., Mayer, F., Ishmurzin, A., Wu, M. & Ludwig, A., 2006, A Study of Macrosegregation Formation in Continuous Casting of a Technical CuSnP Bronze. p. 799-806
Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
Published
A Study of Macrosegregation Formation in Continuous Casting of a Technical CuSnP Bronze
Gruber-Pretzler, M., Mayer, F., Ishmurzin, A., Wu, M. & Ludwig, A., 2006.
Research output: Contribution to conference › Poster › Research › peer-review
Published
Continous Casting of Hypermonotectic AlBiZn Alloys: Experimental Investigations and Numerical Simulation
Gruber-Pretzler, M., Mayer, F., Wu, M., Moiseev, J., Tonn, B. & Ludwig, A., 2006, Continous Casting. p. 194-201
Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research
Published
Control of Interdendritic Convection by the Application of Steady and Time-Dependent Magnetic Fields during Directional Solidification of Aluminium Alloys
Hainke, M., Johannes, D., Wu, M. & Ludwig, A., 2006, Control of Interdendritic Convection by the Application of Steady and Time-Dependent Magnetic Fields during Directional Solidification of Aluminium Alloys. p. 317-324
Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
Published
Control of Interdendritic Convection by the Application of Steady and Time-Dependent Magnetic Fields during Directional Solidification of Aluminium Alloys
Hainke, M., Dagner, J., Wu, M. & Ludwig, A., 2006.
Research output: Contribution to conference › Poster › Research › peer-review
Published
Experimental Observation of Convection during Equiaxed Solidification of Transparent Alloys
Ludwig, A., Eck, S. & Mogeritsch, J., 2006, In: Materials Science Forum. p. 157-162
Research output: Contribution to journal › Article › Research › peer-review
Published
Experimental Observation of Convection during Equiaxed Solidification of Transparent Alloys
Eck, S., Ludwig, A. & Mogeritsch, J., 2006, Materials Science Forum Vol. 508. p. 157-162
Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
Published
Graviy-Induced Convection during Directional Solidification of Hypermonotectic Alloys
Ludwig, A., Wu, M., Abondano, M. & Ratke, L., 2006, In: Materials Science Forum. 508-509, p. 193-198
Research output: Contribution to journal › Article › Research › peer-review
Published
Jahresbericht CD-Labor für Mehrphasensimulation met. Prozesse
Ludwig, A., 2006
Research output: Book/Report › Commissioned report › Transfer › peer-review
Published
Modeling Macrosegregation with a Multiphase Approach: Examples and Applications
Wu, M. & Ludwig, A., 2006, In: JOM. 58, p. 16-18
Research output: Contribution to journal › Article › Research › peer-review
Published
Modeling of Macrosegregations in Continous Casting of Sn-Bronze
Gruber-Pretzler, M., Mayer, F., Wu, M. & Ludwig, A., 2006, Continous Casting. p. 219-225
Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research
Published
Modelling of the thermo-solutal convection, shrinkage flow and grain movement during globular equiaxed solidification in a multi-phase system - II. Application of model
Wang, T., Li, T., Jin, J., Cao, Z., Grimmig, T., Bührig-Polaczek, A., Wu, M. & Ludwig, A., 2006, In: Jinshu-xuebao : Acta metallurgica Sinica. 42, p. 591-598
Research output: Contribution to journal › Article › Research › peer-review
Published
Modelling of the thermo-solutal convection, shrinkage flow and grain movement during globular equiaxed solidification in a multi-phase system - I. Three-phase flow model
Wang, T., Zhang, X., Jin, J., Wu, M., Ludwig, A., Pustal, B. & Bührig-Polaczek, A., 2006, In: Jinshu-xuebao : Acta metallurgica Sinica. 42, p. 584-590
Research output: Contribution to journal › Article › Research › peer-review
Published
Multiphase Flow Simulation of the Cooling Channel Rheocasting Process of A-356 Alloy
Wang, T., Pustal, B., Wu, M., Bührig-Polaczek, A., Ludwig, A., Yao, S., Hao, H., Li, T., Cao, Z., Zhang, X. & Jin, J., 2006, Multiphase Flow Simulation of the Cooling Channel Rheocasting Process of A-356 Alloy. p. 1071-1078
Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
Published
Performance Studie zu Parallelrechnungen (Shared Memory vs. Cluster) von metallurgischen Mehrphasensimulationen
Mayer, F., Wu, M., Ludwig, A., Gruber-Pretzler, M., Pfeiler, C., Hainke, M. & Otto, K.-J., 2006.
Research output: Contribution to conference › Poster › Research › peer-review
Published
Simulation of Particle and Bubble Motion in a Steel Continuous Caster
Pfeiler, C., Ludwig, A. & Wu, M., 2006, TMS Proceedings. p. 737-744
Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
Published
Simulation of the Slag/Pool Interface in the ESR Process by Using a VOF Technique
Ludwig, A., Kharicha, A., Schuetzenhoefer, W. & Reiter, G., 2006, Simulation of the Slag/Pool Interface in the ESR Process by Using a VOF Technique. p. 985-992
Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
Published
Universitärer Forschungscluster "Sustainable Technologies in Metal Production and Processing" (STMP)
Antrekowitsch, H., Biedermann, H., Buchmayr, B., Ebner, F., Eichlseder, W., Harmuth, H., Kepplinger, W., Kessler, F., Krieger, W., Lorber, K. & Ludwig, A., 2006, In: Berg- und hüttenmännische Monatshefte : BHM. 151, p. 263-265
Research output: Contribution to journal › Article › Research › peer-review
Published
Volume Averaging Concept for the Mixed Columnar-Equiaxed Solidification
Wu, M. & Ludwig, A., 2006, Volume Averaging Concept for the Mixed Columnar-Equiaxed Solidification. p. 291-298
Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
2005
Published
Modeling the columnar-to-equiaxed transition with a three-phase Eulerian approach
Ludwig, A. & Wu, M., 15 Dec 2005, In: Materials science and engineering: A, Structural materials: properties, microstructure and processing. 413-414, p. 109-114 6 p.
Research output: Contribution to journal › Article › Research › peer-review
Published
Simulation of cooling channel rheocasting process of A356 aluminum alloy using three-phase volume averaging model
Wang, T., Pustal, B., Abondano, M., Grimmig, T., Bührig-Polaczek, A., Wu, M. & Ludwig, A., 1 Apr 2005, In: Transactions of Nonferrous Metals Society of China (English Edition). 15, 2, p. 389-394 6 p.
Research output: Contribution to journal › Article › Research › peer-review
Published
A 3D Three-Phase Eulerian Solidification Model for the Columnar-to-Equiaxed Transition (CET)
Wu, M. & Ludwig, A., 2005, Int. Conf. on “Simulation and Modelling of Metallurgical Processes in Steelmaking. p. 273-286
Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
Published
A Way of Coupling Ternary Phase Diagram Information with Multiphase Solidification Simulations
Ludwig, A., Gruber-Pretzler, M., Mayer, F., Ishmurzin, A. & Wu, M., 2005, In: Materials science and engineering: A, Structural materials: properties, microstructure and processing. 413-414, p. 485-489
Research output: Contribution to journal › Article › Research › peer-review
Published
Continuous Casting of Hypermonotectic AlBiZn Alloys: Experimental Investigations and Numerical Simulation
Gruber-Pretzler, M., Mayer, F., Wu, M., Moiseev, J., Tonn, B. & Ludwig, A., 2005, Int. Conf. on „Continuous Casting of Non-Ferrous Metals". p. 194-201
Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
Published
Influence of Argon Gas Bubbles and Non-Metallic Inclusions on the Flow Behavior in Steel Continuous Casting
Pfeiler, C., Wu, M. & Ludwig, A., 2005, In: Materials science and engineering: A, Structural materials: properties, microstructure and processing. 413-414, p. 115-120
Research output: Contribution to journal › Article › Research › peer-review
Published
Jahresbericht CD-Labor für Mehrphasensimulation met. Prozesse
Ludwig, A., 2005
Research output: Book/Report › Commissioned report › Transfer › peer-review
Published
Measurement and Simulation of Temperature and Velocity Fields during the Cooling of Water in a Die Casting Model
Eck, S., Stefan Kharicha, M., Ishmurzin, A. & Ludwig, A., 2005, In: Materials science and engineering: A, Structural materials: properties, microstructure and processing. 413-414, p. 79-84
Research output: Contribution to journal › Article › Research › peer-review
Published
Modeling of Macrosegregations in Continuous Casting of Sn-Bronze
Gruber-Pretzler, M., Mayer, F., Wu, M. & Ludwig, A., 2005, Int. Conf. on „Continuous Casting of Non-Ferrous Metals". p. 219-225
Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
Published
Modelling the Columnar-to-Equiaxed Transition with a 3-Phase Eulerian Approach
Ludwig, A. & Wu, M., 2005, In: Materials science and engineering: A, Structural materials: properties, microstructure and processing. 413-414, p. 109-114
Research output: Contribution to journal › Article › Research › peer-review
Published
Modelling the Thermosolutal Convection, Shrinkage Flow and Grain Movement of Globular Equiaxed Solidification Using a Three Phase Model
Wang, T., Wu, M., Ludwig, A., Abondano, M., Pustal, B. & Bührig-Polaczek, A., 2005, In: International journal of cast metals research. 18, p. 221-228
Research output: Contribution to journal › Article › Research › peer-review
Published
Numerical Description of Particle and Bubble Motion in the Submerged Entry Nozzle Region during Steel Continuous Casting
Pfeiler, C., Wu, M. & Ludwig, A., 2005, STEELSIM 2005. p. 231-250
Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
Published
Numerical Study of the Thermal-Solutal Convection and Grain Sedimentation during Globular Equiaxed Solidification
Wu, M., Ludwig, A. & Luo, J., 2005, In: Materials Science Forum. 475-479, p. 2725-2730
Research output: Contribution to journal › Article › Research › peer-review
Published
On Distortions and Gap Formation during Solidification and Subsequent Cooling of a Cylindrical Casting
Ludwig, A., Kron, J., Bellet, M., Pustal, B., Fredrikson, H. & Wendt, J., 2005, In: International journal of cast metals research. p. 295-310
Research output: Contribution to journal › Article › Research › peer-review
Published
On the Impact of Macroscopic Phase Separation on Solidification Microstructures
Wu, M., Ludwig, A., Pelzer, M. & Postl, U., 2005, In: Advanced Engineering Materials. 7-9, p. 846-851
Research output: Contribution to journal › Article › Research › peer-review
Published
Shape and Stability of the Slag/Melt Interface in a Small DC ESR Process
Kharicha, A., Ludwig, A. & Wu, M., 2005, In: Materials science and engineering: A, Structural materials: properties, microstructure and processing. 413-414, p. 129-134
Research output: Contribution to journal › Article › Research › peer-review
Published
Simulation of Cooling Channel Rheocasting Process of A356 Aluminium Alloy Using a Three-Phase Volume Averaging Model
Wang, T., Pustal, B., Abondano, M., Grimmig, T., Bührig-Polaczek, A., Wu, M. & Ludwig, A., 2005, In: Transactions of Nonferrous Metals Society of China. 15, p. 1-6
Research output: Contribution to journal › Article › Research › peer-review
Published
Simulation of droplet formation during DC Electroslag-remelting process
Kharicha, A., Ludwig, A. & Wu, M., 2005, Int. Conf. on “Simulation and Modelling of Metallurgical Processes in Steelmaking”. p. 343-360
Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
Published
Study of Spatial Phase Separation during Solidification and Its Impact on the Formation of Macrosegregations
Wu, M. & Ludwig, A., 2005, In: Materials science and engineering: A, Structural materials: properties, microstructure and processing. 413-414, p. 192-199
Research output: Contribution to journal › Article › Research › peer-review
2004
Published
Comparison of numerical simulation models for predicting temperature in solidification analysis with reference to air gap formation
Kron, J., Bellet, M., Ludwig, A., Pustal, B., Wendt, J. & Fredriksson, H., 31 Dec 2004, In: International journal of cast metals research. 2004, 5, p. 295-310 16 p.
Research output: Contribution to journal › Article › Research › peer-review
Published
About the interactions between thermo-solutal convection, shrinkage flow and grain sedimentation
Ludwig, A., Wu, M., Wang, T. & Bührig-Polaczek, A., 2004, Computational Modeling and Simulation of Materials, III, Part B.. p. 491-502
Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
Published
Chapter 23: Grain Sedimentation and Melt Convection Phenomena during Globular Solidification
Wu, M., Ludwig, A. & Bührig-Polaczek, A., 2004, Solidification and Crystallization. p. 204-212
Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research
Published
Chapter 5: Modeling the Spatial Phase Separation Process in Hypermonotectic Alloys
Wu, M., Ludwig, A. & Ratke, L., 2004, Solidification and Crystallization. p. 34-43
Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research
Published
Consecutive process and microstructure modelling for aluminium sheet production
Neumann, L., Kopp, R., Ludwig, A., Wu, M., Bührig-Polaczek, A., Schneider, M. & Gottstein, G., 2004, In: Modelling and simulation in materials science and engineering. 12, p. 19-31
Research output: Contribution to journal › Article › Research › peer-review
Published
Generalised ‘Jackson-Hunt’ Model for Eutectic Solidification at Low And Large Peclet Numbers And Any Binary Eutectic Phase Diagram
Ludwig, A. & Leibbrandt, S., 2004, In: Materials science and engineering: A, Structural materials: properties, microstructure and processing. p. 540-546
Research output: Contribution to journal › Article › Research › peer-review
Published
Jahresbericht CD-Labor für Mehrphasensimulation met. Prozesse
Ludwig, A., 2004
Research output: Book/Report › Commissioned report › Transfer › peer-review
Published
Modeling Macroscopic phase separation phenomena during solidification with an Eulerian multiphase approach
Wu, M. & Ludwig, A., 2004, 6th Pacific Rim International Conference on Modeling of Casting and Solidification Processes. p. 239-246
Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
Published
Modeling of Free Surface and Thermo-Solutal Convection by a Three-Phase Model
Wang, T., Wu, M., Ludwig, A., Pustal, B. & Bührig-Polaczek, A., 2004, 6th Pacific Rim International Conference on Modeling of Casting and Solidification Processes. p. 181-190
Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
Published
Non-Equilibrium Globular Microstructure suitable for Semi-Solid Casting of Light Metal Alloys by Rapid-Slug-Cooling-Technology (RSCT
Ludwig, A., Bührig-Polaczek, A. & Sahm, P., 2004, In: Materials science and engineering: A, Structural materials: properties, microstructure and processing. p. 651-655
Research output: Contribution to journal › Article › Research › peer-review
Published
On convection induced phase separation during solidification
Ludwig, A. & Wu, M., 2004, Multiphase Phenomena in Materials Processing. p. 93-107
Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
Published
On the interaction between macrosegregation, shrinkage flow and grain movement
Ludwig, A., Wu, M. & Eck, S., 2004, Solidification processes and microstructures: A Symposium in honour of Wilfried Kurz. p. 99-110
Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
Published
Simulation von Transportphänomenen bei der Erstarrung von Gussteilen: Vorhersage von Makroseigerungen und Korngrößenverteilung
Ludwig, A., Wu, M. & Schumacher, P., 2004, In: Gießerei-Rundschau. 51, p. 212-218
Research output: Contribution to journal › Article › Research › peer-review
2003
Published
Modeling of marangoni-induced droplet motion and melt convection during solidification of hypermonotectic alloys
Wu, M., Ludwig, A. & Ratke, L., 1 Jan 2003, In: Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science. 34, 12, p. 3009-3019 11 p.
Research output: Contribution to journal › Article › Research › peer-review
Published
Simulation of time-dependent pool shape during laser spot welding: Transient effects
Ehlen, G., Ludwig, A. & Sahm, P. R., 1 Jan 2003, In: Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science. 34, 12, p. 2947-2961 15 p.
Research output: Contribution to journal › Article › Research › peer-review
Published
Cooperation within MEBSP on the Subject of Air Gap Formation during a Casting Process
Kron, J., Bellet, M., Ludwig, A., Wendt, J., Pustal, B. & Fredrikson, H., 2003, In: Advanced Engineering Materials. 5, p. 78-79
Research output: Contribution to journal › Article › Research › peer-review
Published
Grain evolution and macrosegregation in Al-4.0wt.%Cu casting: simulation and experimental evaluation
Wu, M., Ludwig, A., Sahm, P. R. & Bührig-Polaczek, A., 2003, Modeling of Casting, Welding and Advanced Solidification Processes - X. p. 261-268
Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
Published
Influence of Convection and Grain Movement on Globular Equiaxed Solidification
Wu, M., Ludwig, A., Bührig-Polaczek, A., Fehlbier, M. & Sahm, P. R., 2003, In: International journal of heat and mass transfer. 46, p. 2819-2832
Research output: Contribution to journal › Article › Research › peer-review
Published
Influence of Phase-Transport Phenomena on Macrosegregation and Structure Formation during Solidification
Wu, M. & Ludwig, A., 2003, In: Advanced Engineering Materials. 5, p. 62-66
Research output: Contribution to journal › Article › Research › peer-review
Published
Macro- and Microscopic Coupled Numerical Simulation of Microsegregation during Diffusion Controlled Solidification of Multi-Component Alloys
Ludwig, A., Sahm, P. & Pustal, B., 2003, In: Metallurgical and Materials Transactions B: Process Metallurgy and Materials Processing Science. p. 411-419
Research output: Contribution to journal › Article › Research › peer-review
Published
Microstructure Control by Solidification Processing – Outcome from a European Thematic Network
Lacaze, J., Greer, L., Howe, A., Ludwig, A. & Fredrikson, H., 2003, In: Advanced Engineering Materials. 5, p. 11-16
Research output: Contribution to journal › Article › Research › peer-review
Published
Modeling of Marangoni Convection during Solidification of Hypermonotectic Alloys
Ludwig, A., Wu, M. & Ratke, L., 2003, In: Modelling and simulation in materials science and engineering. p. 755-769
Research output: Contribution to journal › Article › Research › peer-review
Published
Modeling of Marangoni induced droplet motion and convection during solidification of hypermonotectic alloys
Wu, M., Ludwig, A. & Ratke, L., 2003, In: Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science. 34, p. 3009-3019
Research output: Contribution to journal › Article › Research › peer-review
Published
Modeling the decomposition and phase separation during solidification of hypermonotectic alloys
Wu, M., Ludwig, A. & Ratke, L., 2003, Modeling of Casting, Welding and Advanced Solidification Processes - X. p. 141-148
Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
Published
Modelling the solidification of hypermonotectic alloys
Wu, M., Ludwig, A. & Ratke, L., 2003, In: Modelling and simulation in materials science and engineering. 11, p. 755-769
Research output: Contribution to journal › Article › Research › peer-review
Published
Multiphase simulation of transport phenomena during solidification processes
Ludwig, A. & Wu, M., 2003, Modellbildung und Simulation in der Werkstoff-Schweiß- und Umformtechnik. p. 11-20
Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
Published
Split-Solid-Model to Simulation the Formation of Shrinkage Cavities and Macrosegregation in Steel Casting
Ehlen, G., Ludwig, A., Sahm, P. R. & Bührig-Polaczek, A., 2003, Modeling of Casting, Welding and Advanced Solidification Processes - X. p. 285-292
Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
Published
Study of rheology of semisolid alloys within a capillary viscometer
Ludwig, A., Wu, M. & Bührig-Polaczek, A., 2003, Modeling of Casting, Welding and Advanced Solidification Processes - X. p. 191-198
Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
Published
Time Dependent Simulation of Pool Shape during Laser Spot Welding
Ludwig, A., Sahm, P. & Ehlen, G., 2003, In: Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science. p. 2947-2961
Research output: Contribution to journal › Article › Research › peer-review
2002
Published
Influence of Welding Power and Welding Duration on the Shape of the Weld Pool: Transient Effects
Ludwig, A., Ehlen, G. & Sahm, P., 2002, Mathematical Modelling of Weld Phenomena V. p. 161-192
Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research
Published
Modeling of Globular Equiaxed Solidification with a Two-Phase Approach
Ludwig, A. & Wu, M., 2002, In: Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science. p. 3673-3683
Research output: Contribution to journal › Article › Research › peer-review
Published
Thermophysical Properties Necessary for Advanced Casting Simulations
Ludwig, A., 2002, In: International journal of thermophysics. p. 1131-1135
Research output: Contribution to journal › Article › Research › peer-review
2001
Published
Comparison of Dendrites of a Pure Material with Thermal Alloy Dendrites: an Experimental Method to Estimate the T0-Temperature
Ludwig, A., 2001, In: Acta materialia. p. 165-169
Research output: Contribution to journal › Article › Research › peer-review
Published
General Concept for a Stability Analysis of a Planar Interface under Rapid Solidification Conditions in Multicomponent Alloy Systems
Ludwig, A. & Pustal, B., 2001, In: Materials science and engineering: A, Structural materials: properties, microstructure and processing. p. 337-340
Research output: Contribution to journal › Article › Research › peer-review
Published
How to Find Thermophysical Material Property Data for Casting Simulations?
Ludwig, A., 2001, In: Advanced Engineering Materials. p. 11-15
Research output: Contribution to journal › Article › Research › peer-review
2000
Published
Influence of Convection and Surface Effects on Macrosegregations in Eutectic and Peritectic Systems
Ludwig, A., Ehlen, G. & Sahm, P., 2000, In: Materials Science Forum. p. 105-109
Research output: Contribution to journal › Article › Research › peer-review
Published
Pattern Formation during Solidification of non-Faceting Systems
Ludwig, A., 2000
Research output: Book/Report › Book › Research
Published
Solute Trapping in Highly Undercooled Succinonitrile-Acetone Alloys
Ludwig, A. & Ehlen, G., 2000, In: Materials Science Forum. p. 19-23
Research output: Contribution to journal › Article › Research › peer-review
1999
Published
Dendritic and Cellular Doublets: Morphologies of Thin Solid Films Growing Along a Substrate During the Initial State of the Solidification of Bulk Melts
Ludwig, A., 1999, In: Physical review : E, Statistical, nonlinear and soft matter physics. p. 1893-1897
Research output: Contribution to journal › Article › Research › peer-review
Published
General Theory for Eutectic Solidification
Ludwig, A., 1999, Solidification of Metallic Melts in Research and Technology. p. 55-59
Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research
Published
Numerical Simulation and Experimental Results of in-situ Heat Treated Austempered Ductile Iron
Ludwig, A. & Sahm, P., 1999, In: International journal of cast metals research. p. 483-486
Research output: Contribution to journal › Article › Research › peer-review
Published
Time Dependent Interface Stability During Rapid Solidification
Ludwig, A. & Sahm, P., 1999, In: Journal of applied physics. p. 3682-3687
Research output: Contribution to journal › Article › Research › peer-review
1998
Published
Morphological Stability of a Planar Interface Subject to Rapid Quenching
Ludwig, A. & Sahm, P., 1998, In: Journal of crystal growth. p. 291-296
Research output: Contribution to journal › Article › Research › peer-review
Published
Numerical Simulation of Microstructure Formation during Electron-Beam Surface Remelting of an Al-Si Alloy
Ludwig, A. & Sahm, P., 1998, Mathematical Modelling of Weld Phenomena IV. p. 332-et seq
Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research
Published
The Interface Response-Functions in Multi-componental Alloy Solidification
Ludwig, A., 1998, In: Physica D: Nonlinear phenomena. 124, p. 271-275
Research output: Contribution to journal › Article › Research › peer-review
1997
Published
In-Situ Observation of Cellular Growth under Rapid Solidification Conditions
Ludwig, A. & Sahm, P., 1997, In: Materials science and engineering: A, Structural materials: properties, microstructure and processing. p. 124-128
Research output: Contribution to journal › Article › Research › peer-review
1996
Published
Cellular Growth of a Dilute Binary Alloy at High Solidification Velocit
Ludwig, A. & Kurz, W., 1996, In: Scripta materialia. p. 1217-1220
Research output: Contribution to journal › Article › Research › peer-review
Published
Coupled Modelling of the Solidification Process Predicting Temperatures, Stresses and Microstructures
Ludwig, A. & Sahm, P., 1996, In: Computational materials science. p. 194-198
Research output: Contribution to journal › Article › Research › peer-review
Published
Direct Observation of Solidification Microstructures around Absolute Stability
Ludwig, A. & Kurz, W., 1996, In: Acta materialia. p. 3643-3648
Research output: Contribution to journal › Article › Research › peer-review
Published
Hypercooling of an Organic Alloy Melt
Ludwig, A., 1996, In: Scripta materialia. p. 579-582
Research output: Contribution to journal › Article › Research › peer-review
Published
On the Morphological Transition from Cellular to Planar Growth at High Solidification Velocity
Ludwig, A. & Kurz, W., 1996, In: Materials Science Forum. p. 13-17
Research output: Contribution to journal › Article › Research › peer-review
1994
Published
Undercooling of Superalloy Melts: Basis of a New Manufacturing Technique for Single-Crystal Turbine Blades
Ludwig, A. & Sahm, P., 1994, In: Materials science and engineering: A, Structural materials: properties, microstructure and processing. p. 299-303
Research output: Contribution to journal › Article › Research › peer-review
1992
Published
High-Speed Temperature Measurements During Rapid Solidification of Iron-Silicon Ribbons Produced by Planar Flow Casting
Ludwig, A. & Frommeyer, G., 1992, In: Steel research international. p. 399-403
Research output: Contribution to journal › Article › Research › peer-review
Published
Solid-Liquid Phase Transition of FeSi 5 wt.% Alloys under Non-Equilibrium Conditions
Ludwig, A., 1992
Research output: Book/Report › Book › Research
1991
Published
Heat Transfer in the Single Roller Quenching Methods
Ludwig, A., 1991, In: Materials science and engineering: A, Structural materials: properties, microstructure and processing. p. 751-754
Research output: Contribution to journal › Article › Research › peer-review
Published
Limit of Absolute Stability for Crystal Growth into Undercooled Alloy Melts
Ludwig, A., 1991, In: Acta metallurgica et materialia. 39, 11, p. 2795-2799
Research output: Contribution to journal › Article › Research › peer-review
Published
Modeling of Dendritic Growth During the Ribbon Formation in Planar Flow Casting
Ludwig, A. & Frommeyer, G., 1991, In: Materials science and engineering: A, Structural materials: properties, microstructure and processing. p. 722-725
Research output: Contribution to journal › Article › Research › peer-review
Published
Simulation of the Dendritic Solidification During Single Roller Quenchin
Ludwig, A., 1991, In: Materials Science Forum. p. 211-215
Research output: Contribution to journal › Article › Research › peer-review
Published
Solid-Liquid Interfacial Free Energy
Ludwig, A., 1991, In: Materials science and engineering: A, Structural materials: properties, microstructure and processing. p. 577-580
Research output: Contribution to journal › Article › Research › peer-review
1990
Published
Modeling of Crystal Growth During the Ribbon Formation in Planar Flow Casting
Ludwig, A. & Frommeyer, G., 1990, In: Steel research international. p. 467-70
Research output: Contribution to journal › Article › Research › peer-review

Research Portal

Andreas Ludwig

Publications / Theses