Montanuniversität

Organisational unit: University

151 - 200 out of 30,152Page size: 50

Publications / Theses

  1. 2021
  2. Published

    Role of effective strain on the deformability of brittle Hf-based bulk metallic glass

    Kim, S. Y., Park, E. S., Eckert, J. & Lee, M. H., 1 Nov 2021, In: Journal of Materials Research and Technology. 15, p. 6713-6720 8 p.

    Research output: Contribution to journal › Article › Research › peer-review

  3. Published

    Wear behavior of a heat-treatable al-3.5cu-1.5 mg-1Si alloy manufactured by selective laser melting

    Wang, P., Lei, Y., Qi, J. F., Yu, S. J., Setchi, R., Wu, M. W., Eckert, J., Li, H. C. & Scudino, S., 1 Nov 2021, In: Materials. 14, 22, 7048.

    Research output: Contribution to journal › Article › Research › peer-review

  4. Published

    Effect of metal particle size and powder volume fraction on the filling performance of powder injection moulded parts with a microtextured surface

    Ammosova, L., Cano Cano, S., Schuschnigg, S., Kukla, C., Mönkkönen, K., Suvanto, M. & Gonzalez-Gutierrez, J., Nov 2021, In: Precision Engineering. 72, p. 604-612

    Research output: Contribution to journal › Article › Research › peer-review

  5. Published

    Stainless steel reveals an anomaly in thermal expansion behavior of severely deformed materials

    Renk, O., Enzinger, R., Gammer, C., Scheiber, D., Oberdorfer, B., Tkadletz, M., Stark, A., Sprengel, W., Pippan, R., Eckert, J., Romaner, L. & Ruban, A., Nov 2021, In: Physical review materials . 5, 11, 113609.

    Research output: Contribution to journal › Article › Research › peer-review

  6. Published

    Using fin ray chemistry to discriminate hatchery reared juvenile age-0 Persian sturgeons by their origin in the Southern Caspian Sea region using split stream ICP-MS/MC ICP-MS

    Bakhshalizadeh, S., Tchaikovsky, A., Bani, A., Prohaska, T. & Zitek, A., Nov 2021, In: Fisheries research. 243, 106093.

    Research output: Contribution to journal › Article › Research › peer-review

  7. Published

    Application of liquid-liquid mass transfer for a steel ladle

    Doletschek, M., Vollmann, S. & Harmuth, H., 6 Oct 2021, STEELSIM 2021, 9th International Conference on Modeling and Simulation of Metallurgical Processes in Steelmaking-STEELSIM2021. p. 8 8 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  8. Published

    Influence of high pressure torsion on microstructure evolution and mechanical properties of AZ80/SiC magnesium matrix composites

    Akbaripanah, F., Sabbaghian, M., Fakhar, N., Minárik, P., Veselý, J., Hung, P. T., Kapoor, G., Renk, O., Máthis, K., Gubicza, J. & Eckert, J., 5 Oct 2021, In: Materials Science and Engineering A. 826, 141916.

    Research output: Contribution to journal › Article › Research › peer-review

  9. Published

    Sucker Rod Pump Performance in Polymer Back-producing Wells - Simulation, Laboratory and Field Testing

    Gesslbauer, H., Eisner, P., Langbauer, C., Knauhs, P., Marschall, C. & Pongratz, R., 1 Oct 2021, In: Erdöl, Erdgas, Kohle. 2021, 9

    Research output: Contribution to journal › Article › Research › peer-review

  10. Published

    A comprehensive review of processing strategies for iron precipitation residues from zinc hydrometallurgy

    Hoeber, L. & Steinlechner, S., Oct 2021, In: Cleaner Engineering and Technology. 4, 100214.

    Research output: Contribution to journal › Review article › peer-review

  11. Published

    Algorithmic modelling of advanced chlorination procedures for multimetal recovery

    Höber, L., Lerche, R. & Steinlechner, S., Oct 2021, In: Metals. 11, 10, 1595.

    Research output: Contribution to journal › Article › Research › peer-review

  12. Published

    Chromitites from the Vavdos ophiolite (Chalkidiki, Greece): Petrogenesis and geotectonic settings; constrains from spinel, olivine composition, PGE mineralogy and geochemistry

    Sideridis, A., Zaccarini, F., Koutsoviti, P., Grammatikopoulos, T., Tsikouras, B., Garuti, G. & Hatzipanagiotou, K., Oct 2021, In: Ore geology reviews. 137, 17 p., 104289.

    Research output: Contribution to journal › Article › Research › peer-review

  13. Published

    High-entropy eutectic composites with high strength and low Young's modulus

    Maity, T., Prashanth, K. G., Balcı, Ö., Cieślak, G., Spychalski, M., Kulik, T. & Eckert, J., Oct 2021, In: Material Design and Processing Communications. 3, 5, e211.

    Research output: Contribution to journal › Article › Research › peer-review

  14. Published

    A combined experimental and simulation-based approach towards toughness optimized polymeric multi-layer structures

    Arbeiter, F., Wiener, J., Tiwari, A., Pinter, G. G. & Kolednik, O., 28 Sept 2021.

    Research output: Contribution to conference › Poster › Research

  15. Published

    EURECA-PRO: The European University on Responsible Consumption and Production

    Pichler, L., Egger, J., Feiel, S., Kircher, V. & Kosciuszko, A., 16 Sept 2021, In: Berg- und hüttenmännische Monatshefte : BHM. 2021, 5 p.

    Research output: Contribution to journal › Article › Research › peer-review

  16. Published

    Enhancement of Interfacial Hydrogen Interactions with Nanoporous Gold-Containing Metallic Glass

    Sarac, B., Ivanov, Y. P., Micusik, M., Karazehir, T., Putz, B., Dancette, S., Omastova, M., Greer, A. L., Sarac, A. S. & Eckert, J., 15 Sept 2021, In: ACS Applied Materials and Interfaces. 13, 36, p. 42613-42623 11 p.

    Research output: Contribution to journal › Article › Research › peer-review

  17. Published

    Corrosion of stainless steel by urea at high temperature

    Galakhova, A., Mori, G. K., Kadisch, F., Heyder, S., Wieser, H., Sartory, B. & Burger, S., 9 Sept 2021, In: Corrosion and materials degradation. 2, 3

    Research output: Contribution to journal › Article › Research › peer-review

  18. Published

    Damage tolerance and fracture properties in fused filament fabrication - trends, limitations and possibilities

    Arbeiter, F., 8 Sept 2021, Abstract Book of the Second European Conference on Structural Integrity of Additively Manufactured Materials.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  19. Published

    Experimental approach for assessing filter-cake removability derived from reservoir drill-in fluids

    Elmgerbi, A., Thonhauser, G., Fine, A., Borovina, A. & Hincapie , R., 8 Sept 2021.

    Research output: Contribution to conference › Paper › peer-review

  20. Published

    FlyGrid – Integration of Flywheel Energy Storage Systems into EV Fast Charging Infrastructure

    Thormann, B., Braunstein, R. & Kienberger, T., 8 Sept 2021, IEWT 2021 Conference proceedings.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  21. Published

    Morphology and Weld Strength of a Semi-Crystalline Polymer Produced via Material Extrusion-Based Additive Manufacturing

    Petersmann, S., Primetzhofer, A., Lammer, H., Leßlhumer, J., Pinter, G. G. & Arbeiter, F., 8 Sept 2021, Abstract Book of the Second European Conference on Structural Integrity of Additively Manufactured Materials.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  22. Published

    Validierung eines Schnellbewertungstools von elektrischen Netztopologien zur Skalierung von RES und modernen Lasten auf der Niederspannungsebene

    Traupmann, A., Maier, M. & Kienberger, T., 8 Sept 2021, Konferenzband 12.Internationale Energiewirtschaftstagung 2021. 11 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  23. E-pub ahead of print

    Distribution distortion in the statistical analysis of strength data when using multiple specimen batches

    Salem, J. A., Lube, T., Béhar-Lafenêtre, S. & Baker, E. H., 2 Sept 2021, (E-pub ahead of print) In: Journal of the European Ceramic Society.

    Research output: Contribution to journal › Article › Research › peer-review

  24. Published

    BEER® – Bio Enhanced Energy Recovery – Green Technology for Economic Productivity Enhancement – Part 2

    Kogler, K. & Langbauer, C., 1 Sept 2021, In: Oil gas European magazine. 47.2021, 2, p. 24-32 9 p.

    Research output: Contribution to journal › Article › Research › peer-review

  25. Published

    Development of a mobile module-based wind tunnel for the determination of collection efficiencies of particulate matter on surface structures

    Spörl, P., Göndör, A., Irrgeher, J., Prohaska, T., Trimmel, S., Capari, L., Haluza, D., Scharf, B., Kasper-Giebl, A. & Pitha, U., 1 Sept 2021, In: Sustainability (Switzerland). 13, 17, 9565.

    Research output: Contribution to journal › Article › Research › peer-review

  26. Published

    Temperature, precipitation, and vegetation changes in the Eastern Mediterranean over the last deglaciation and Dansgaard-Oeschger events

    Stockheke, M., Bechtel, A., Peterse, F., Guillemont, T. & Schubert, C. J., 1 Sept 2021, In: Palaeogeography, palaeoclimatology, palaeoecology. 577, 110535.

    Research output: Contribution to journal › Article › Research › peer-review

  27. Published

    Characterization of crude oils derived from carbonate and siliciclastic source rocks using FTICR-MS

    Hosseini, S. H., Sachsenhofer, R. F., Snowdon, L. R. & Oldenburg, T. B. P., Sept 2021, In: Organic geochemistry. 159, 104286.

    Research output: Contribution to journal › Article › Research › peer-review

  28. Published

    Correlating point defects with mechanical properties in nanocrystalline TiN thin films

    Zhang, Z., Ghasemi, A., Koutná, N., Xu, Z., Grünstäudl, T., Song, K., Holec, D., He, Y., Mayrhofer, P. H. & Bartosik, M., Sept 2021, In: Materials and Design. 207.2021, September, p. 1-10 109844.

    Research output: Contribution to journal › Article › Research › peer-review

  29. Published

    Development of a Mobile Module-Based Wind Tunnel for the Determination of Collection Efficiencies of Particulate Matter on Surface Structures

    Spoerl, P., Goendoer, A., Irrgeher, J., Prohaska, T., Trimmel, S., Capari, L., Haluza, D., Scharf, B., Kasper-Giebl, A. & Pitha, U., Sept 2021, In: sustainability. 13, 17

    Research output: Contribution to journal › Article › Research › peer-review

  30. Published

    Effect of nanoparticles on morphology and size of primary silicon and property of selective laser melted Al-high Si content alloys

    Xi, L., Guo, S., Ding, K., Prashanth, K. G., Sarac, B. & Eckert, J., Sept 2021, In: Vacuum. 191, 110405.

    Research output: Contribution to journal › Article › Research › peer-review

  31. Published

    Efficient 3d finite element modeling of cyclic elasto-plastic rolling contact

    Meyer, K. A., Skrypnyk, R. & Pletz, M., Sept 2021, In: Tribology International. 161.2021, September, 12 p., 107053.

    Research output: Contribution to journal › Article › Research › peer-review

  32. Accepted/In press

    High-speed nanoindentation mapping of organic matter-rich rocks: A critical evaluation by correlative imaging and machine learning data analysis

    Vranjes-Wessely, S., Misch, D., Kiener, D., Cordill, M. J., Frese, N., Beyer, A., Horsfield, B., Wang, C. & Sachsenhofer, R. F., Sept 2021, (Accepted/In press) In: International journal of coal geology.

    Research output: Contribution to journal › Article › Research › peer-review

  33. Published

    Potential and limitations of direct austenite grain growth measurement by means of HT-LSCM

    Fuchs, N. & Bernhard, C., Sept 2021, In: Materials Today Communications. 28, 102468.

    Research output: Contribution to journal › Article › Research › peer-review

  34. Published

    Fracture of layered polymers

    Arbeiter, F., Petersmann, S., Wiener, J. & Spoerk, M., 31 Aug 2021.

    Research output: Contribution to conference › Abstract

  35. Published

    Changing morphological features in a semi-crystalline polymer in material-extrusion based additive manufacturing

    Petersmann, S., Spörk-Erdely, P., Feuchter, M., Wieme, T., Arbeiter, F. & Spoerk, M., 30 Aug 2021, Book of Abstracts Polymer Meeting 14. TU Graz

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  36. Published

    Curing of epoxidized plant oils with solid acid hardener

    Schwaiger, M. & Resch-Fauster, K., 30 Aug 2021, Polymer Meeting 14 - Book of Abstracts. TU Graz

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  37. Published

    Cryo-Casting for Controlled Decomposition of Cu-Zr-Al Bulk Metallic Glass into Nanomaterials: Implications for Design Optimization

    Sarac, B., Kim, J. T., Ivanov, Y. P., Soprunyuk, V., Ketov, S. V., Schranz, W., Hong, S. H., Kim, K. B., Greer, A. L. & Eckert, J., 27 Aug 2021, In: ACS Applied Nano Materials. 4, 8, p. 7771-7780 10 p.

    Research output: Contribution to journal › Article › Research › peer-review

  38. Published

    Regret Bounds for Reinforcement Learning via Markov Chain Concentration

    Ortner, R., 26 Aug 2021.

    Research output: Contribution to conference › Poster › Research › peer-review

  39. Published

    Assessment of Technological Developments in Data Analytics for Sensor-Based and Robot Sorting Plants Based on Maturity Levels to Improve Austrian Waste Sorting Plants

    Friedrich, K., Fritz, T., Koinig, G., Pomberger, R. & Vollprecht, D., 23 Aug 2021, In: Sustainability. 2021, 13(16)

    Research output: Contribution to journal › Article › Research › peer-review

  40. E-pub ahead of print

    Multifunctional performance of Ti2AlC MAX phase/2D braided alumina fiber laminates

    Gonzales-Julian, J., Kraleva, I. R., Belmonte, M., Jung, F., Gries, T. & Bermejo Moratinos, R., 20 Aug 2021, (E-pub ahead of print) In: Journal of the American Ceramic Society.

    Research output: Contribution to journal › Article › Research › peer-review

  41. Published

    Disordered interfaces enable high temperature thermal stability and strength in a nanocrystalline aluminum alloy

    Balbus, G. H., Kappacher, J., Sprouster, D. J., Wang, F., Shin, J., Eggeler, Y. M., Rupert, T. J., Trelewicz, J. R., Kiener, D., Maier-Kiener, V. & Gianola, D. S., 15 Aug 2021, In: Acta Materialia. 2021, 215, 116973.

    Research output: Contribution to journal › Article › Research › peer-review

  42. Published

    Effects of Ni and Co alloying on thermal, magnetic and structural properties of Fe-(Ni,Co)-P-C metallic glass ribbons

    Yüce, E., Sarac, B., Ketov, S., Reissner, M. & Eckert, J., 15 Aug 2021, In: Journal of alloys and compounds. 872, 159620.

    Research output: Contribution to journal › Article › Research › peer-review

  43. Published

    On an experimental-computational approach for localised durability assessment of sliding contacts

    Pusterhofer, M. & Grun, F., 14 Aug 2021, In: Wear. 2021

    Research output: Contribution to journal › Article › Research › peer-review

  44. Published

    Lifetime mobility of an Arctic woolly mammoth

    Wooller, M. J., Bataille, C., Druckenmiller, P., Erickson, G. M., Groves, P., Haubenstock, N., Howe, T., Irrgeher, J., Mann, D., Moon, K., Potter, B. A., Prohaska, T., Rasic, J., Reuther, J., Shapiro, B., Spaleta, K. J. & Willis, A. D., 13 Aug 2021, In: Science. 373, 6556, p. 806-808 3 p.

    Research output: Contribution to journal › Article › Research › peer-review

  45. Published

    Lifetime mobility of an Arctic woolly mammoth

    Wooller, M. J., Bataille, C., Druckenmiller, P., Erickson, G. M., Groves, P., Haubenstock, N., Howe, T., Irrgeher, J., Mann, D., Moon, K., Potter, B. A., Prohaska, T., Rasic, J., Reuther, J., Shapiro, B., Spaleta, K. J. & Willis, A. D., 13 Aug 2021, In: Science. 373, 6556, p. 806-+

    Research output: Contribution to journal › Article › Research › peer-review

  46. Published

    Aufbereitung und Veredlung von Kohlenstoff-Vorkonzentraten aus Pyrolyse-Prozessen zu marktfähigen Kohlenstoff-Produkten im Hinblick auf große Oberflächen und hohe Reinheiten: Vorstellung des Dissertationsprojektes

    Hartig, G., Gehringer, S. & Flachberger, H., 10 Aug 2021, In: Berg- und hüttenmännische Monatshefte : BHM. 2021, 166 (8), p. 397-401 5 p.

    Research output: Contribution to journal › Article › Research

  47. Published

    Structural homology of the strength for metallic glasses

    Yang, W., Sun, X., Liu, H., Yu, C., Li, W., Inoue, A., Şopu, D., Eckert, J. & Tang, C., 10 Aug 2021, In: Journal of Materials Science and Technology. 81, p. 123-130 8 p.

    Research output: Contribution to journal › Article › Research › peer-review

  48. Published

    Bending Properties of Lightweight Copper Specimens with Different Infill Patterns Produced by Material Extrusion Additive Manufacturing, Solvent Debinding and Sintering

    Gonzalez-Gutierrez, J., Cano Cano, S., Ecker, J. V., Kitzmantel, M., Arbeiter, F., Kukla, C. & Holzer, C., 6 Aug 2021, In: Applied Sciences (Switzerland). 11, 16

    Research output: Contribution to journal › Article › Research › peer-review

  49. Published

    Atomic diffusivities in amorphous and liquid Cu-Zr: Kirkendall effects and dependence on packing density

    Ketov, S. V., Ivanov, Y. P., Putz, B., Zhang, Z., Eckert, J. & Greer, A. L., 1 Aug 2021, In: Acta Materialia. 214, 116993.

    Research output: Contribution to journal › Article › Research › peer-review

  50. Published

    Characterisation of actual weld geometry and stress concentration of butt welds exhibiting local undercuts

    Ottersböck, M. J., Leitner, M. & Stoschka, M., 1 Aug 2021, In: Engineering Structures. 240.2021, 1 August, 18 p., 112266.

    Research output: Contribution to journal › Article › Research › peer-review

  51. Published

    Surface stress of gold nanoparticles revisited

    Holec, D., Löfler, L., Zickler, G., Vollath, D. & Fischer, F.-D., 1 Aug 2021, In: International journal of solids and structures. 224.2021, 1 August, p. 1-13 13 p., 111044.

    Research output: Contribution to journal › Article › Research › peer-review

Previous 1 2 3 4 5 6 7 8 ...604 Next
View graph of relations

Contact information

Franz-Josef-Strasse 18, 8700 Leoben
Austria
  • Main phone number: +43 3842 402