Montanuniversität

Organisational unit: University

26101 - 26200 out of 30,153Page size: 100

Publications / Theses

  1. 2004
  2. Published

    Ablagerung von MVA-Schlacken

    Mikkola, H., 2004, In: Institutszeitschrift des Institutes für Nachhaltige Abfallwirtschaft und Entsorgungstechnik, Montanuniversität Leoben. p. 5-5

    Research output: Contribution to journal › Article › Research › peer-review

  3. Published

    A Boosting Approach to Multiple Instance Learning

    Auer, P. & Ortner, R., 2004, Machine Learning, 15th European Conference on Machine Learning, ECML 2004. Springer, p. 63-74

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  4. Published

    About the interactions between thermo-solutal convection, shrinkage flow and grain sedimentation

    Ludwig, A., Wu, M., Wang, T. & Bührig-Polaczek, A., 2004, Computational Modeling and Simulation of Materials, III, Part B.. p. 491-502

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  5. Published

    A-deficient chromites–titanates with the perovskite-type structure: synthesis and electrical conductivity

    Vashook, V. V., Zosel, J., Preis, W., Sitte, W. & Guth, U., 2004, In: Solid State Ionics. 175, p. 441-444

    Research output: Contribution to journal › Article › Research › peer-review

  6. Published

    A fatigue approach for lifetime prediction of PE-HD pipe grades

    Balika, W., Pinter, G., Choi, B.-H. & Lang, R., 2004, Society of Plastics Engineers. p. 4028-4032

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  7. Published

    Aktuelle Arbeitsgebiete – Lehrstuhl für Physikalische Chemie

    Bucher, E., Bürgermeister, A., Preis, W. & Waldner, P., 2004.

    Research output: Contribution to conference › Poster › Research › peer-review

  8. Published

    Aktuelles aus Wissenschaft und Forschung - Kunststoffrohre 2004: 18. Leobener Kunststoffkolloquium

    Pinter, G. (Editor) & Lang, R. (Editor), 2004, Leoben: Eigenverlag.

    Research output: Book/Report › Anthology › Research

  9. Published

    A Look into the Earth: Evaluating the use of magnetic survey in African Archaeology

    Magnavita, C. & Schleifer, N., 2004, In: Journal of African archaeology. 2, p. 49-63

    Research output: Contribution to journal › Article › Research › peer-review

  10. Published

    Alternatives Antriebskonzept für teleskopierbare Ausleger - Teil 1

    Stoschka, M. & Kessler, F., 2004, In: F + H : Fördern und Heben. 54, p. 570-572

    Research output: Contribution to journal › Article › Research › peer-review

  11. Published

    Alternatives Antriebskonzept für teleskopierbare Ausleger - Teil 2

    Stoschka, M. & Kessler, F., 2004, In: F + H : Fördern und Heben. 54, p. 637-639

    Research output: Contribution to journal › Article › Research › peer-review

  12. Published

    Alternatives Antriebskonzept für teleskopierbare Ausleger - Teil I

    Kessler, F. & Stoschka, M., 2004, In: F + H : Fördern und Heben. p. 570-572

    Research output: Contribution to journal › Article › Research › peer-review

  13. Published

    Alternatives Antriebskonzept für teleskopierbare Ausleger - Teil II

    Kessler, F. & Stoschka, M., 2004, In: F + H : Fördern und Heben. p. 637-639

    Research output: Contribution to journal › Article › Research › peer-review

  14. Published

    A metamorphosed early Cambrian crust-mantle transition in the Eastern Alps, Austria

    Melcher, F. & Meisel, T., 2004, In: Journal of petrology. p. 1689-1723

    Research output: Contribution to journal › Article › Research › peer-review

  15. Published

    Analysis of heavy metal pollution by magnetic methods - applications in Austria.

    Hanesch, M., Hemetsberger, S. & Scholger, R., 2004.

    Research output: Contribution to conference › Poster › Research › peer-review

  16. Published

    Analyzing absolute paleointensity determinations: Acceptance criteria and the software ThellierTool4.0

    Leonhardt, R., Heunemann, C. & Krasa, D., 2004, In: Geochemistry, geophysics, geosystems. 5, p. Q12-016

    Research output: Contribution to journal › Article › Research › peer-review

  17. Published

    An EBSD-study of recrystallisation behaviour of a nickel base alloy caused by hot compression

    Mitsche, S., Poelt, P., Sommitsch, C. & Walter, M., 2004.

    Research output: Contribution to conference › Poster › Research › peer-review

  18. Published

    A new analytical procedure for PGE determinations in chromitites

    Meisel, T., Paliulionyte, V., Moser, J. & Kettisch, P., 2004, SEG 2004 - Predictive Mineral Discovery Under Cover, WA. Centre for Global Metallogeny, The Univ. of Western Australia Publication. p. 247-250

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  19. Published

    A new low friction concept for high temperatures: lubricious oxide formation on sputtered VN coatings

    Gassner, G., Mayrhofer, P. H., Kutschej, K., Mitterer, C. & Kathrein, M., 2004, In: Tribology Letters. 17, p. 751-756

    Research output: Contribution to journal › Article › Research › peer-review

  20. Published

    A new low friction concept for Ti1-xAlxN based coatings in high temperature applications

    Kutschej, K., Mayrhofer, P. H., Mitterer, C., Polcik, P. & Kathrein, M., 2004, In: Surface & coatings technology. 188-189, p. 358-363

    Research output: Contribution to journal › Article › Research › peer-review

  21. Published

    A New PAC-bound for Intersection-closed Concept Classes

    Auer, P. & Ortner, R., 2004, Learning Theory, 17th Annual Conference on Learning Theory. Springer, p. 408-414

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  22. Published

    Anforderungen an prozessorientierte Heißrissbildungsmodelle.

    Bernhard, C., 2004, In: Berg- und hüttenmännische Monatshefte : BHM. 149, p. 90-95

    Research output: Contribution to journal › Article › Research › peer-review

  23. Published

    An investigative study of Si poisoning in Al-Si alloys using the metallic glass technique

    McKay, B. & Schumacher, P., 2004, An investigative study of Si poisoning in Al-Si alloys using the metallic glass technique. p. 157-166

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  24. Published

    Anisotropic intrinsic and extrinsic stresses in gan thin film on LiAlO2 (100)

    Eiper, E., Gerlach, J. W., Rauschenbach, B. & Keckes, J., 2004.

    Research output: Contribution to conference › Poster › Research › peer-review

  25. Published

    A note on space approximation of parabolic evolution equations

    Hausenblas, E., 2004, In: Applied Mathematics and Computation.

    Research output: Contribution to journal › Article › Research › peer-review

  26. Published

    Anwendung der spektralen Induzierten Polarisation (SIP) in der Archäologischen Prospektion

    Schleifer, N., 2004

    Research output: Book/Report › Book › Research

  27. Published

    Anwendungen von Membranverfahren in der Reinwassertechnologie

    Draxler, J., 2004, ÖWAV-Arbeitsbehelf. Vol. ÖWAV. p. 1-29 (ÖWAV-Arbeitsbehelf).

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research

  28. Published

    Anwendung von Membranverfahren in der Metall- und Lebensmittelindustrie

    Draxler, J., 2004

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  29. Published

    Applicability and limitations of the FNCT-methodology to predict the long term failure behavior of polyethylene-pipe materials

    Haager, M., Pinter, G. & Lang, R. W., 2004, p. 4023-4027. 5 p.

    Research output: Contribution to conference › Paper › peer-review

  30. Published

    Applicability and limitations of the FNCT-methodology to predict the long term failure behaviour of polyethylene pipe materials

    Haager, M. J., Pinter, G. & Lang, R., 2004, Society of Plastics Engineers. p. 4023-4027

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  31. Published

    Applicability of linear elastic fracture mechanics to fatigue in amorphous and semi-crystalline polymers

    Lang, R., Balika, W. & Pinter, G., 2004, The Application of Fracture Mechanics to Polymers, Adhesvies and Composites. p. 83-92

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research

  32. Published

    Application of the thermodynamic extremal principle to the diffusional phase transformation

    Svoboda, J., Gamsjäger, E., Fischer, F. D. & Fratzl, P., 2004, In: Acta materialia. 52, p. 959-967

    Research output: Contribution to journal › Article › Research › peer-review

  33. Published

    Archaeomagnetic curves for Austria and Germany

    Schnepp, E. & Lanos, P., 2004, Contributions to Geophys. and Geodesy. p. 138-138

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  34. Published

    Archaeomagnetic curves for Austria and Germany

    Schnepp, E., 2004, In: Contributions to geophysics & geodesy (Contributions to Geophysics and Geodesy). 34, p. 138-138

    Research output: Contribution to journal › Article › Research › peer-review

  35. Published

    A short report of the investigations made on the facies of Austrian coal deposits

    Sachsenhofer, R., 2004, In: International journal of coal geology. 58, p. 87-89

    Research output: Contribution to journal › Article › Research › peer-review

  36. Published

    A study on crack propagation in heterogeneous elastic-plastic solids

    Srinivasan, K., Siegmund, T. & Kolednik, O., 2004, Proceedings of 15th European Conference of Fracture, Advanced Fracture Mechanics for Life and Safety Assessments. p. ?-?

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  37. Published

    Asymmetric crack wake plasticity - a reason for roughness induced crack closure

    Pippan, R., Strobl, G., Kreuzer, H. & Motz, C., 2004, In: Acta materialia. 52, p. 4493-4502

    Research output: Contribution to journal › Article › Research › peer-review

  38. Published

    A Systematic Approach to the Optimal Design of Feed Forward Neural Networks Applied to Log-Synthesis

    Fruhwirth, R. K. & Steinlechner, S. P., 2004.

    Research output: Contribution to conference › Paper › peer-review

  39. Published

    A Threshold Stress Intensity Factor at the Onset of Stable Extension of Knoop Indentation Cracks

    Lube, T. & Fett, T., 2004, In: Engineering Fracture Mechanics. p. 2263-2269

    Research output: Contribution to journal › Article › Research › peer-review

  40. Published

    Atomic Level growth study of vanadium oxide nanostructures on Rh(111)

    Schoiswohl, J., Sock, M., Eck, S., Surnev, S., Ramsey, M. G., Netzer, F. P. & Kresse, G., 2004, In: Physical review : B, Condensed matter and materials physics. 69, p. 1-15

    Research output: Contribution to journal › Article › Research › peer-review

  41. Published

    Augmented Planewave Methods

    Ambrosch-Draxl, C., 2004, In: Physica scripta. T109, p. 48-48

    Research output: Contribution to journal › Article › Research › peer-review

  42. Published

    Beiträge zu einer Verfahrensbewertung von Schmelzprozessen zur Inertisierung von Flugaschen aus Müll- und Klärschlammverbrennungsanlagen

    Weiß, C., 2004

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  43. Published

    Benchmarks in der Reststoffsammlung - relativer Effizienzvergleich und simulierte Verbesserungspotentiale

    Kudjelka, A. & Wolfbauer, J., 2004, Konferenzbericht der 7. DepoTech. Verl. Glückauf, p. 697-700

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  44. Published

    Berechnung der Antriebsleistung bei RopeCon-Systemen

    Diethardt, P., Kessler, F. & Stoschka, M., 2004, In: Schüttgut. 10, 4, p. 288-293

    Research output: Contribution to journal › Article › Research › peer-review

  45. Published

    Bericht der Systemprüfung System TS-1000-ZD am Prüf- und Forschungszentrum Erzberg durch die Trumer Schutzbauten GmbH am 04. Juni 2004

    Wagner, H. & Heiss, C., 2004

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  46. Published

    Bericht der Systemprüfung System TS-150 am Prüf- und Forschungszentrum Erzberg durch die Trumer Schutzbauten GmbH am 14. Juni 2004

    Wagner, H. & Heiss, C., 2004

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  47. Published

    Beschleunigte Prüfmethoden zur Charakterisierung des Langzeitversagensverhaltens von thermoplastischen Rohrwerkstoffen

    Haager, M. J., Pinter, G. & Lang, R., 2004, Aktuelles aus Wissenschaft und Forschung - Kunststoffrohre 2004. Polymer Competence Center Leoben, Institut für Werkstoffkunde und -prüfung der Kunststoffe, p. VI-1-VI-13

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  48. Published

    Beschleunigtes Aufschmelzen von Magnesium-Masseln durch optimierte Strömungsverhältnisse

    Rockenschaub, H., Pabel, T., Romansky, M., Schumacher, P. & Sigmund, A., 2004, In: Druckguss-Praxis. p. 24-32

    Research output: Contribution to journal › Article › Research › peer-review

  49. Published

    Besonderheit der Prüfung flexibler Steinschlagschutzverbauungen auf Schrägwurfanlagen am Beispiel Steirischer Erzberg

    Heiss, C., 2004.

    Research output: Contribution to conference › Poster › Research › peer-review

  50. Published

    Besonderheiten der Prüfung fexibler Steinschlagschutzverbauungen auf Schrägwurfanlagen am Beispiel Steirischer Erzberg

    Heiss, C., 2004, Besonderheiten der Prüfung fexibler Steinschlagschutzverbauungen auf Schrägwurfanlagen am Beispiel Steirischer Erzberg. p. 49-58

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  51. Published

    Bestimmung und Bedeutung der Randbedingungen für die Simulation von Stranggießprozessen.

    Lechner, M., Reiter, J., Bernhard, C., Forsthuber, M. & Zach, O., 2004, In: Berg- und hüttenmännische Monatshefte : BHM. 149, p. 101-106

    Research output: Contribution to journal › Article › Research › peer-review

  52. Published

    Bildung von Erdölmuttergesteinen und Kohleflözen in spätorogenen Scherzonen am Beispiel des Lavanttaler Beckens

    Reischenbacher, D., Sachsenhofer, R. & Ebner, F., 2004

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  53. Published

    Brandbeständige Tunnelbaustoffe

    Mayer, A., 2004.

    Research output: Contribution to conference › Poster › Research › peer-review

  54. Published

    Bulk and grain boundary resistivities of donor-doped barium titanate ceramics

    Preis, W., Bürgermeister, A., Sitte, W. & Supancic, P., 2004, In: Solid State Ionics. 173, p. 69-75

    Research output: Contribution to journal › Article › Research › peer-review

  55. Published

    Bulk and grain boundary resistivities of donor doped BaTiO3

    Preis, W., Bürgermeister, A. & Sitte, W., 2004.

    Research output: Contribution to conference › Poster › Research › peer-review

  56. Published

    Burial dolomitization in the carbonate succession of the Cambrian Lancara Fm., Cantabrian mountains (NW Spain)

    Lapponi, F., Bechstädt, T., Boni, M., Schneider, J., Bakker, R. & Banks, D., 2004, Burial dolomitization in the carbonate succession of the Cambrian Lancara Fm., Cantabrian mountains (NW Spain). p. G21-10-G21-10

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  57. Published

    Calorimetric evidence for frictional self-adaptation of TiAlN/VN superlattice coatings

    Mayrhofer, P. H., Hovsepian, P. E., Mitterer, C. & Münz, W.-D., 2004, In: Surface & coatings technology. 177-178, p. 341-347

    Research output: Contribution to journal › Article › Research › peer-review

  58. Published

    Castability of Steels: Influence of the Interfacial Properties on the Continuous Casting Process.

    Karasangabo, A. & Bernhard, C., 2004, In: Berg- und hüttenmännische Monatshefte : BHM. 149, p. 83-89

    Research output: Contribution to journal › Article › Research › peer-review

  59. Published

    Castability of steels: role of the interfacial properties.

    Karasangabo, A., 2004.

    Research output: Contribution to conference › Poster › Research › peer-review

  60. Published

    CFD-Turbosorp: Zusammenfassung des Entwicklungsstandes

    Weiß, C., 2004

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  61. Published

    Chapter 23: Grain Sedimentation and Melt Convection Phenomena during Globular Solidification

    Wu, M., Ludwig, A. & Bührig-Polaczek, A., 2004, Solidification and Crystallization. p. 204-212

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research

  62. Published

    Chapter 5: Modeling the Spatial Phase Separation Process in Hypermonotectic Alloys

    Wu, M., Ludwig, A. & Ratke, L., 2004, Solidification and Crystallization. p. 34-43

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research

  63. Published

    Characterisation of the fatigue behaviour of RTM-laminates by isocyclic stress-strain diagrams

    Ladstätter, E., Pinter, G., Billinger, W. & Lang, R., 2004, Society of Plastics Engineers. p. 1379-1383

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  64. Published

    Characterization of hydrothermal dolomitizing fluids from fluid inclusion microthermometry and Raman spectroscopy: a case study from the Cantabrian Zone (N Spain)

    Gasparrini, M., Bakker, R. & Bechstädt, T., 2004, Characterization of hydrothermal dolomitizing fluids from fluid inclusion microthermometry and Raman spectroscopy: a case study from the Cantabrian Zone (N Spain). p. G21-10-G21-10

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  65. Published

    Characterization of Tribo-Layers on Self-Lubricating PACVD TiN Coatings

    Badisch, E., Mitterer, C., Mayerhofer, P. H., Mori, G., Bakker, R., Brenner, J. & Störi, H., 2004, In: Thin solid films. 460, p. 125-132

    Research output: Contribution to journal › Article › Research › peer-review

  66. Published

    Characterizsation of Table Tennis Racket Sandwich Rubbers

    Major, Z. & Lang, R., 2004, 8th Internationale Table Tennis Federation Sports Science Congress and the 3rd Qorld Congress of Science and Racket Sports. p. 146-151

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  67. Published

    Charge ordering in quarter-filled ladder systems coupled to the lattice

    Aichhorn, M., Hohenadler, M., Sherman, E. Y., Spitaler, J., Draxl, C. & Evertz, H. G., 2004, In: Physica status solidi / B. 69, p. 245108-1-245108-11

    Research output: Contribution to journal › Article › Research › peer-review

  68. Published

    Chemistry and microstructure of PLD (Ti,Al)CxN1-x coatings deposited at room temperature

    Lackner, J., Waldhauser, W., Ebner, R. & Bakker, R., 2004, In: Applied physics / A (Series A, Materials science & processing). 79, p. 1469-1471

    Research output: Contribution to journal › Article › Research › peer-review

  69. Published

    Chemometrical classification of pumpkin seed oils using UV-Vis, NIR and FTIR spectra

    Lankmayr, E., Mocak, J., Serdt, K., Balla, B., Wenzl, T., Bandoniene, D., Gfrerer, M. & Wagner, F. S., 2004, In: Journal of biochemical and biophysical methods. 61, p. 95-106

    Research output: Contribution to journal › Article › Research › peer-review

  70. Published

    Coal Geology of the Donets Basin (Ukraine/Russia): An Overview

    Privalov, V. A., Sachsenhofer, R., Panova, E. A. & Antsiferov, V. A., 2004, In: Berg- und hüttenmännische Monatshefte : BHM. 149, p. 212-222

    Research output: Contribution to journal › Article › Research › peer-review

  71. Published

    Combining finite element and finite volume methods for efficient multiphase flow simulations in highly heterogeneous and structurally complex geologic media

    Matthäi, S., Robert, S. & Geiger, S., 2004, In: Geofluids. 4, p. 284-299

    Research output: Contribution to journal › Article › Research › peer-review

  72. Published

    Common hot tearing criteria and experimental validation

    Pierer, R., Bernhard, C. & Chimani, C., 2004, In: Berg- und hüttenmännische Monatshefte : BHM. 149, p. 95-101

    Research output: Contribution to journal › Article › Research › peer-review

  73. Published

    Comparative study of turbulent solid-liquid extraction methods for the determination of organochlorine pesticides

    Bandoniene, D., Gfrerer, M. & Lankmayr, E., 2004, In: Journal of biochemical and biophysical methods. 61, p. 143-153

    Research output: Contribution to journal › Article › Research › peer-review

  74. Published

    Comparing Theory and Experiment in Open Quantum Dots at Finite Temperatures

    Brunner, R., 2004.

    Research output: Contribution to conference › Poster › Research › peer-review

  75. Published

    Comparison of PWM Inverter Power Measurement Systems in Accuracy, Expenditure and Cost

    Mayerhofer, R. & Weiß, H., 2004, Proceedings 7th International Conference on Actual Problems of Electronic Instrument Engineering.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  76. Published

    Composition and mineralogy of PGE-rich chromitites in the Nurali lherzolite-gabbro complex, southern Urals

    Zaccarini, F., Pushkarev, E., Fershtater, G. & Garuti, G., 2004, In: The Canadian Mineralogist. 42, p. 545-562

    Research output: Contribution to journal › Article › Research › peer-review

  77. Published

    Conductance and Temperature Measurement System for 1500°C Metallurgical Slag

    Korp, J., Maier, W., Schmid, A. & Weiß, H., 2004, Proceedings of the 7th International Symposium on Actual Problems of Eelctronic Instrument Engineering. p. 178-182

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  78. Published

    Consecutive process and microstructure modelling for aluminium sheet production

    Neumann, L., Kopp, R., Ludwig, A., Wu, M., Bührig-Polaczek, A., Schneider, M. & Gottstein, G., 2004, In: Modelling and simulation in materials science and engineering. 12, p. 19-31

    Research output: Contribution to journal › Article › Research › peer-review

  79. Published

    Continuous Shaft Conveying in Mining with the Pocketlift System in Comparison to Intermittent Batch Load Type Transport

    Paelke, J. W., Günther, R. & Kessler, F., 2004, In: Bulk solids handling. 24, p. 34-43

    Research output: Contribution to journal › Article › Research › peer-review

  80. Published

    Correlation between material structure, processing conditions and optical properties of PP cast films

    Wallner, G., Resch, K., Hlawacek, G., Teichert, C., Maier, G., Binder, W. & Gahleitner, M., 2004,

    ANTEC 2004, 62nd Annual Technical Conference & Exhibition, Vol. I, Chicago, IL,

    .     p. 1096-1100

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  81. Published

    Crack Growth in Massive Forming: A Fracture Mechanics Approach

    Trattnig, G., Sommitsch, C. & Pippan, R., 2004, Proceedings of the 15th European Conference of Fracture. p. 0-0

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  82. Published

    Crack-Tip Shielding and Anti-Shielding by a Bimaterial Interface

    Kolednik, O., Predan, J., Shan, G. X., Simha, N. K. & Fischer, F. D., 2004, Proceedings The 15th European Conference of Fracture, Advanced Fracture Mechanics for Life and Safety Assessments. p. ?-?

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  83. Published

    Creep behaviour of Alpine salt rock and the influence of insoluble residues in solution mining

    Pittino, G. & Golser, J., 2004, Engineering Geology for Infrastructure Planning in Europe - A European Perspective. p. 593-603

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  84. Published

    Creep crack growth in high density polyethylene

    Pinter, G. & Lang, R., 2004, The Application of Fracture Mechanics to Polymers, Adhesvies and Composites. p. 49-54

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research

  85. Published

    Criteria for the selection of reagents for CO2-absorption

    Draxler, J., Stevens, G. & Kentish, S., 2004, Proceedings GHGT7, Vancouver. p. 81-81

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  86. Published

    Critical Thermodynamic Assessment and Modeling of the Fe-Ni-S System

    Waldner, P. & Pelton, A. D., 2004, In: Metallurgical and Materials Transactions B: Process Metallurgy and Materials Processing Science. 35B, p. 897-907

    Research output: Contribution to journal › Article › Research › peer-review

  87. Published

    Crystal chemistry and structural refinement of chromites from different chromitite layers of the Bushveld Complex

    Lenaz, D., Braidotti, R., Princivalle, F., Garuti, G. & Zaccarini, F., 2004, Geosciences-Africa 2004. p. 379-380

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  88. Published

    Das Markscheidewesen in Österreich

    Pilgram, R. & Randjbar, B., 2004, Das Markscheidewesen in der Rohstoff-, Energie- und Entsorgungswirtschaft : neue Technologien und Aufgaben in den Geowissenschaften . p. 290-299 (Wissenschaftliche Schriftenreihe im Markscheidewesen; vol. 17).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  89. Published

    Defect chemical analysis of the electronic conductivity of strontium-substituted lanthanum ferrite

    Bucher, E. & Sitte, W., 2004, In: Solid State Ionics. 173, p. 23-28

    Research output: Contribution to journal › Article › Research › peer-review

  90. Published

    Defect Chemical Modeling of (La,Sr)(Co,Fe)O3-delta

    Bucher, E. & Sitte, W., 2004, In: Journal of electroceramics. 13, p. 779-784

    Research output: Contribution to journal › Article › Research › peer-review

  91. Published

    Defect ordering in oxygen-deficient (La,Sr)CoO3-d

    Bucher, E., Sitte, W., Gspan, C., Grogger, W. & Hofer, F., 2004.

    Research output: Contribution to conference › Poster › Research › peer-review

  92. Published

    Demonstration of connection between pollutant dispersal and atmospheric boundary layers by use of magnetic susceptibility mapping, St. Jacob (Austria)

    Maier, G. & Scholger, R., 2004, In: Physics and chemistry of the earth. p. 997-1009

    Research output: Contribution to journal › Article › Research › peer-review

  93. Published

    Der Berstdruck eines zylindrischen Stahlsilos unter Explosionsinnendruckbeanspru-chung

    Wasicek, M., Fischer, F. D., Sabirov, I. & Kolednik, O., 2004, In: Stahlbau. 73, p. 116-122

    Research output: Contribution to journal › Article › Research › peer-review

  94. Published

    Design of nanostructured hard coatings for optimum performance

    Mitterer, C. & Mayrhofer, P. H., 2004, Euro Ceramics VIII. p. 453-458

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  95. Published

    Determination of anthropogenic input of Ru, Rh, Pd, Re, Os, Ir and Pt in soils along Austrian motorways by isotope dilution ICP-MS

    Fritsche, J. & Meisel, T., 2004, In: Science of the total environment. p. 145-154

    Research output: Contribution to journal › Article › Research › peer-review

  96. Published

    Developing of Structure and Properties in Low-Carbon Steels During Warm and Hot Equal Channel Angular Pressing

    Dobatkin, S. V., Odessky, P. D., Pippan, R., Raab, G. I., Krasilnikov, N. A. & Arsenkin, A. M., 2004, Proceedings of the Conference "Nanomaterials by Severe Plastic Deformation - NANOSPD2". Materials Physics Inst., Univ. of Vienna, p. 804-809

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  97. Published

    Development of Microstructure and Thermal Stability of Nanostructured Chromium Processed by Severe Plastic Deformation

    Wadsack, R., Pippan, R. & Schedler, B., 2004, Proceedings of the Conference "Nanomaterials by Severe Plastic Deformation - NANOSPD2". Materials Physics Inst., Univ. of Vienna, p. 654-659

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  98. Published

    Developments in offline evaluation of cleanliness measurements with automated SEM-EDX technique used for generation of an inclusion database

    Nuspl, M., Angeli, J., Posch, W. & Wegscheider, W., 2004, Developments in offline evaluation of cleanliness measurements with automated SEM-EDX technique used for generation of an inclusion database. p. 1-11

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  99. Published

    DFT beyond the Ground State

    Ambrosch-Draxl, C., 2004, Proceedings of the International Summerschool, Physica Skrpta. p. 9-39

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research

  100. Published

    Die Fluor- und Chlorproblematik in der Aufarbeitung zinkhältiger Reststoffe

    Antrekowitsch, J., 2004.

    Research output: Contribution to conference › Poster › Research › peer-review

  101. Published

    Die Kombination von Wissens- und Prozessmanagement - Herausforderung für die Unternehmen im wissensintensiven Umfeld

    Engelhardt-Nowitzki, C., 2004, Prozesswissen als Erfolgsfaktor. p. 13-35

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research

Previous 1...258 259 260 261 262 263 264 265 ...302 Next
View graph of relations

Contact information

Franz-Josef-Strasse 18, 8700 Leoben
Austria
  • Main phone number: +43 3842 402