Montanuniversität

Organisational unit: University

25301 - 25400 out of 30,153Page size: 100

Publications / Theses

  1. 2005
  2. Published

    Mengenbilanzen bei der Aufarbeitung von Elektronikschrott

    Antrekowitsch, H., 2005

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  3. Published

    Metallographische Untersuchungen an Drähten

    Panzenböck, M., 2005

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  4. Published

    Metallographische Untersuchungen an Heizleitern

    Panzenböck, M., 2005

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  5. Published

    Metallographische Untersuchungen an Schweissungen - Bericht 1

    Panzenböck, M., 2005

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  6. Published

    Metallographische Untersuchungen an Schweissungen - Bericht 2

    Panzenböck, M., 2005

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  7. Published

    Metallographische Untersuchungen an Schweissungen - Bericht 3

    Panzenböck, M., 2005

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  8. Published

    Metallographische Untersuchungen an Schweissungen - Bericht 4

    Panzenböck, M., 2005

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  9. Published

    Methoden der Angewandten Systemanalyse für die partizipatorische Entscheidungsfindung bei komplexen Sachverhalten

    Wolfbauer, J., 2005, Gelebtes Netzwerkmanagement - Festschrift für Albert F. Oberhofer zum 80. Geburtstag. p. 267-289

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research

  10. Published

    Methodikentwicklung für die Klebstoffcharakterisierung

    Pilz, G., Wolfahrt, M. & Lang, R., 2005

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  11. Published

    Methodikentwicklung für eine Klebstoffspezifikation

    Pilz, G., Wolfahrt, M. & Lang, R., 2005

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  12. Published

    Methodikentwicklung zur Reinharzoptimierung

    Pilz, G., Wolfahrt, M. & Lang, R., 2005

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  13. Published

    Methodikfindung zur Simulation von thermomechanisch beanspruchten Motorbauteilen aus Aluminiumlegierungen

    Riedler, M., 2005

    Research output: Thesis › Doctoral Thesis

  14. Published

    Methods for the thermo-mechanical fatigue simulation on energy criterions

    Riedler, M., Minichmayr, R. & Eichlseder, W., 2005, Methods for the thermo-mechanical fatigue simulation on energy criterions. p. 496-503

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  15. Published

    Methods of controlling the cross-section in rolling mills for long products

    Harrer, O.-K., Hatzenbichler, T., Kostúr, K., Pástor, M. & Truchlý, M., 2005, In: Steel grips : journal of steel and related materials. 3, p. 375-379

    Research output: Contribution to journal › Article › Research › peer-review

  16. Published

    Micromechanical evaluation of intergranular crack growth under continuous-casting conditions

    Chimani, C., Shan, G. X., Mörwald, K., Kolednik, O., Böhm, H. J., Duschlbauer, D. & Drabek, T., 2005, Proceedings of the 5th European Continuous Casting Conference. La Revue de Metallurgie, p. ?-?

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  17. Published

    Micropaleontology of "Orbitolina beds" of Lower Austria (Branderfleck Formation, Lower Cenomanian)

    Schlagintweit, F. & Wagreich, M., 2005, In: Jahrbuch / Geologische Bundesanstalt. 145, p. 115-125

    Research output: Contribution to journal › Article › Research › peer-review

  18. Published

    Microstructural characterization of deformed volume beneath microindentaions

    Motz, C., Kiener, D., Kreuzer, H., Prantl, W. & Pippan, R., 2005, Microstructural characterization of deformed volume beneath microindentaions. p. 459-464

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  19. Published

    Microstructural evolution of a pearlitic steel during severe plastic deformation

    Wetscher, F., Pippan, R., Sturm, S., Kauffmann, F., Scheu, C. & Dehm, G., 2005, 7th multinational Congress on Microscopy. p. 187-188

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  20. Published

    Microstructural evolution of a rapidly solidified high-speed steel during high temperature annealing

    Stotter, C., Leitner, H., Ebner, R., Ramminger, P. & Brandstätter, E., 2005, Microstructural evolution of a rapidly solidified high-speed steel during high temperature annealing. p. 53-61

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  21. Published

    Microstructure and Mechanical Properties of Si and Y Doped Tantalum

    Bischof, M. A., Mayer, S., Leitner, H., Clemens, H., Pranzas, K., Staron, P., Dehm, G., Knabl, W., Voiticek, A. & Geiger, E., 2005, 16th International Plansee Seminar, (G. Kneringer, P. Rödhammer, H. Wildner, eds.). Plansee AG, p. 489-503

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  22. Published

    Microstructure and Thermo-mechanical Behavior of NiAl Coatings

    Dehm, G., Riethmüller, J., Wellner, P., Kraft, O., Clemens, H. & Arzt, E., 2005, Intergrative and Interdisciplinary Aspects of Intermetallics. Materials Research Society : MRS, p. S1.3.1-S.1.3.6

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  23. Published

    Microstructure of Rapidly Solidified CuAlNi Shape Memory Alloy Ribbons

    Lojen, G., Anzel, I., Kneißl, A., Krizman, A., Unterweger, E., Kosec, B. & Bizajk, M., 2005, AMME 2005. p. 399-402

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  24. Published

    Microstructure of rapid solidified Cu-Al-Ni shape memory alloy ribbons

    Lojen, G., Anzel, I., Kneißl, A., Krizman, A., Unterweger, E., Kosec, B. & Bizjak, M., 2005, In: Journal of materials processing technology. 162/163, p. 220-229

    Research output: Contribution to journal › Article › Research › peer-review

  25. Published

    Microstructure Simulation in Radial Forging of Nickel Base Alloys

    Harrer, O.-K., Sommitsch, C., Wallner, S. & Wieser, V., 2005, The 8th ESAFORM Conference on Material Forming. p. 515-518

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  26. Published

    Microstructure transition from lamellar to compacted graphite using different modification agents

    Geier, G. F., Bauer, W., Mckay, B. & Schumacher, P., 2005, In: Materials science and engineering: A, Structural materials: properties, microstructure and processing. p. 339-345

    Research output: Contribution to journal › Article › Research › peer-review

  27. Published

    Microtructural Control by Grain Refinement

    Schumacher, P., 2005, 45. Gießereitagung. p. 02-18

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  28. Published

    Midterm Report

    Hofer, C. & Teichert, C., 2005

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  29. Published

    Mid Term review plus annexes

    Lube, T. & Pascual-Herrero, J., 2005

    Research output: Book/Report › Commissioned report › Research

  30. Published

    Mikropaläontologie und Biostratigraphie der Plassen-Karbonatplattform der Typlokalität (Ober-Jura bis Kreide, Salzkammergut, Östereich).

    Schlagintweit, F., Gawlick, H.-J. & Lein, R., 2005, In: Mitteilungen der Gesellschaft der Geologie- und Bergbaustudenten Österreichs. 47, p. 11-102

    Research output: Contribution to journal › Article › Research › peer-review

  31. Published

    Mikrostrukturelle Charakterisierung von Stabelektroden für Entstaubungsanlagen

    Leitner, H., 2005

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  32. Published

    Mikrowellen-Untersuchungen von Halbleiter-Quanten-Punkten

    Kuchar, F. & Meisels, R., 2005

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  33. Published

    Minerales del grupo del Platino en las cromititas ofioliticas de las Sierras Pampeanas de Cordoba (Argentina)

    Proenza, J., Zaccarini, F., Cabana, M., Escayola, M., Schalamuk, I. & Garuti, G., 2005, Actas XVI Congreso Geologico Argentino. p. 226-226

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  34. Published

    Mineralogical investigations of sinter iron ores and sinter

    Mali, H., Zirngast, J. & Zahn, M., 2005, The 5th European Coke and Ironmaking Congress. p. TU9:41-12-TU9:41-12

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  35. Published

    Minerals of Au, Ag And U in Volcanic-Rock-Associated Massive Sulfide Deposits of the Northern Apennine Ophiolite (Italy)

    Garuti, G. & Zaccarini, F., 2005, In: The Canadian Mineralogist. 43, p. 935-950

    Research output: Contribution to journal › Article › Research › peer-review

  36. Published

    Minerals planning policies in Europe

    Wagner, H., 2005, In: Materials and geoenvironment. 52, p. 523-659

    Research output: Contribution to journal › Article › Research › peer-review

  37. Published

    MinPet2005. Mitteilungen der Österreichischen Mineralogischen Gesellschaft 151

    Koller, F. (Editor), Beran, A. (Editor), Tessadri, R. (Editor) & Raith, J. (Editor), 2005, Wien: Eigenverlag.

    Research output: Book/Report › Anthology › Research

  38. Published

    MNA Networking project (BMWA)

    Kuchar, F., 2005

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  39. Published

    Modeling of Macrosegregations in Continuous Casting of Sn-Bronze

    Gruber-Pretzler, M., Mayer, F., Wu, M. & Ludwig, A., 2005, Int. Conf. on „Continuous Casting of Non-Ferrous Metals". p. 219-225

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  40. Published

    Modeling of the elctronic transport properties of La1-xSrxFeO3-delta with respect to oxygen deficiency

    Bucher, E. & Sitte, W., 2005.

    Research output: Contribution to conference › Poster › Research › peer-review

  41. Published

    Modeling the thermal expansion of the refractory lining of a RH-degasser taking into consideration the influence of joints

    Gruber, D., 2005, In: DIANA Elements Magazine. 1, p. 10 1 p.

    Research output: Contribution to journal › Article › Research › peer-review

  42. Published

    Modellierung und Simulation des thermomechanischen Ermüdungsverhaltens von Aluminiumbauteilen

    Minichmayr, R., 2005, 284 p.

    Research output: Thesis › Doctoral Thesis

  43. Published

    Modellierung von Stoff- und Energieströmen unter besonderer Berücksichtigung des Flammofenraffinationsprozesses sowie der Kreislaufströme einer Sekundärkupferhütte

    Candic, M., Messner, T., Pesl, J. & Antrekowitsch, H., 2005.

    Research output: Contribution to conference › Poster › Research › peer-review

  44. Published

    Modelling Iron Ore Reduction for Processes using Consecutive Fluidized Bed Reactors

    Schuster, S., Thurnhofer, A., Winter, F., Fischer, H. & Schenk, J., 2005, Proceeding IFSA. p. 65-72

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  45. Published

    Modelling of Phase Transformations in Substitutional Alloys

    Svoboda, J., Vala, J., Gamsjäger, E. & Fischer, F. D., 2005, In: Defect and diffusion forum [Elektronische Resource]. 237-240, p. 647-652

    Research output: Contribution to journal › Article › Research › peer-review

  46. Published

    Modelling the Columnar-to-Equiaxed Transition with a 3-Phase Eulerian Approach

    Ludwig, A. & Wu, M., 2005, In: Materials science and engineering: A, Structural materials: properties, microstructure and processing. 413-414, p. 109-114

    Research output: Contribution to journal › Article › Research › peer-review

  47. Published

    Modelling the Thermosolutal Convection, Shrinkage Flow and Grain Movement of Globular Equiaxed Solidification Using a Three Phase Model

    Wang, T., Wu, M., Ludwig, A., Abondano, M., Pustal, B. & Bührig-Polaczek, A., 2005, In: International journal of cast metals research. 18, p. 221-228

    Research output: Contribution to journal › Article › Research › peer-review

  48. Published

    Moderne Berechnungsmethoden zur Auslegung von Schnecken und Extrusionswerkzeugen

    Langecker, G. & Fertschej, A., 2005, In: Österreichische Kunststoff-Zeitschrift. p. 192-195

    Research output: Contribution to journal › Article › Research › peer-review

  49. Published

    Möglichkeiten zur Beeinflussung des Oxidationszustandes vanadiumoxidhältiger Schlacken - Literaturrecherche

    Krassnig, H.-J. & Ressel, R., 2005

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  50. Published

    Montanhistorische Objekte als Quelle archäologischer, historischer und geophysikalischer Information

    Schnepp, E. & Mauritsch, H. J., 2005, Das kulturelle Erbe in Montan- und Geowissenschaften. p. 153-154

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  51. Published

    Monte Carlo Simulation of Diffusion with Uniform Sinks and Sources for Vacancies

    Ženíšek, J., Svoboda, J. & Fischer, F. D., 2005, In: Defect and diffusion forum [Elektronische Resource]. 237-240, p. 1168-1173

    Research output: Contribution to journal › Article › Research › peer-review

  52. Published

    Morphologie-Analyse von Halbleiter-Nanostrukturen

    Teichert, C., 2005, Handbuch der Nanoanalytik, Steiermark. p. 182-183

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research

  53. Published

    Morphology of sexiphenyl films on anisotropic substrates

    Hlawacek, G., Andreev, A., Teichert, C., Berkebile, S., Koller, G. & Ramsey, M. G., 2005.

    Research output: Contribution to conference › Poster › Research › peer-review

  54. Published

    Morphology of sexiphenyl films on anisotropic substrates

    Teichert, C. & Hlawacek, G., 2005, International Conference on Micro- and Nano-Engineering 2005 (MNE 2005).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  55. Published

    Morphology of sexiphenyl films on anisotropic substrates

    Hlawacek, G., Andreev, A., Teichert, C., Berkebile, S., Koller, G. & Ramsey, M. G., 2005.

    Research output: Contribution to conference › Poster › Research › peer-review

  56. Published

    Multiaxial Fatigue of Crank Shafts

    Fröschl, J., Lamik, A., Eichlseder, W. & Godor, I., 2005, Multiaxial Fatigue of Crank Shafts. p. 37-42

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  57. Published

    Multifunctional multi-component PVD coatings for cutting tools

    Kathrein, M., Michotte, C., Penoy, M., Polcik, P. & Mitterer, C., 2005, In: Surface & coatings technology. 200, p. 1867-1871

    Research output: Contribution to journal › Article › Research › peer-review

  58. Published

    Multi-functional multi-component Ti1-xAlxN based coatings

    Kutschej, K., Mayrhofer, P., Schatte, J., Kathrein, M., Michotte, C., Polcik, P. & Mitterer, C., 2005, 16th International Plansee Seminar, (G. Kneringer, P. Rödhammer, H. Wildner, eds.). Plansee AG, p. 774-788

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  59. Published

    Multifunctional Thermal CVD (M) (S) (N) coatings for cutting

    Wagner, J. & Mitterer, C., 2005

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  60. Published

    Nachhaltigkeitsorientierte Unternehmensführung

    Biedermann, H., 2005, Sustainability Management for Industries - Wertsteigerung durch Nachhaltigkeit. p. 15-21

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research

  61. Published

    Namasos Project (EC-STRP NMP 505854-1

    Hofer, C. & Teichert, C., 2005

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  62. Published

    Nanoindentation applied on a tungsten - copper composite before and after high-pressure torsion

    Schöberl, T., Sabirov, I. & Pippan, R., 2005, In: Zeitschrift für Metallkunde : international journal of materials research and advanced techniques. 96, p. 1056-1062

    Research output: Contribution to journal › Article › Research › peer-review

  63. Published

    Nanoindentation in Teeth: The Influence of Experimental Conditions on local mechanical Properties

    Guidoni, G.-M., Denkmayr, J., Schöberl, T. & Jäger, I., 2005.

    Research output: Contribution to conference › Poster › Research › peer-review

  64. Published

    Nanoindentation investigations on a high pressure torsion deformed tungsten-copper composite

    Schöberl, T., Sabirov, I. & Pippan, R., 2005, Proceedings of 1st Vienna Conference Micro- and Nano-Technology. Österreichische Tribologische Gesellschaft, p. 159-166

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  65. Published

    Nano-Indentation of SiC and Si3N4/SiC ceramic materials

    Balog, M., Sajgalík, P., Lencés, Z., Hnatko, M., Keckes, J., Huang, J. L., Janega, J. & Horvathova, R., 2005, In: Materials Science Forum. 290, p. 272-275

    Research output: Contribution to journal › Article › Research › peer-review

  66. Published

    Nanoindentierung

    Schöberl, T., 2005, Handbuch der Nanoanalytik Steiermark. p. 53-54

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research

  67. Published

    Nanoindentierungsversuche an W/Cu-Mikro- und Nano-Verbundwerkstoffen

    Schöberl, T., 2005, Handbuch der Nanoanalytik Steiermark. p. 184-185

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research

  68. Published

    Nanokristallisierung durch Hochverformung

    Pippan, R., Vorhauer, A., Wetscher, F. & Dehm, G., 2005, Handbuch der Nanoanalytik Steiermark. p. 47-49

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research

  69. Published

    Nanomagnet arrays fabricated on self-organized semiconductor templates

    Hofer, C. & Teichert, C., 2005.

    Research output: Contribution to conference › Poster › Research › peer-review

  70. Published

    Nanomagnet arrays fabricated on self-organized semiconductor templates

    Hofer, C. & Teichert, C., 2005.

    Research output: Contribution to conference › Poster › Research › peer-review

  71. Published

    Nanomagnet arrays fabricated on self-organized semiconductor templates

    Teichert, C. & Hofer, C., 2005.

    Research output: Contribution to conference › Poster › Research › peer-review

  72. Published

    Nanometer Scale Characterization of Polypropylene Cast Film Surfaces

    Resch, K., Wallner, G., Hlawacek, G., Teichert, C., Gahleitner, M. & Binder, W., 2005.

    Research output: Contribution to conference › Poster › Research › peer-review

  73. Published

    Nano-scale characterization of high-k dielectric materials by conducting atomic force microscopy

    Andreev, A. & Teichert, C., 2005.

    Research output: Contribution to conference › Poster › Research › peer-review

  74. Published

    Nanoscale Deformation Mechanisms in Bone

    Gupta, H. S., Wagermaier, W., Zickler, G., Aroush, D.R.-B., Funari, S. S., Roschger, P., Wagner, D. & Fratzl, P., 2005, In: Nano Letters. 5, p. 2108-2111

    Research output: Contribution to journal › Article › Research › peer-review

  75. Published

    Nanoscaled structure of a Cu-Fe composite processed by high-pressure torsion

    Sauvage, X. & Pippan, R., 2005, In: Materials science and engineering: A, Structural materials: properties, microstructure and processing. 410-411, p. 345-347

    Research output: Contribution to journal › Article › Research › peer-review

  76. Published

    Nanoscale morphological and electrical homogeneity of HfO2 and ZrO2 thin films

    Teichert, C. & Kremmer, S., 2005, In: Journal of applied physics. 97

    Research output: Contribution to journal › Article › Research › peer-review

  77. Published

    Nanostructure formation on ion eroded SiGe and Si surfaces

    Hofer, C. & Teichert, C., 2005.

    Research output: Contribution to conference › Poster › Research › peer-review

  78. Published

    Nanostructure formation on ion-eroded SiGe films on Si(001)

    Hofer, C. & Teichert, C., 2005.

    Research output: Contribution to conference › Poster › Research › peer-review

  79. Published

    Nano structures by severe plastic deformation - Jahresbericht 2005

    Scheriau, S. & Pippan, R., 2005

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  80. Published

    Nanostrukturierte Schichten gegen Hitze

    Mayrhofer, P. H. & Moser, M., 2005, In: Der Standard : Österreichs unabhängige Tageszeitung für Wirtschaft, Politik und Kultur. p. A4-A4

    Research output: Contribution to journal › Article › Research › peer-review

  81. Published

    Nano-versus macro-hardness of liquid phase sintered SiC

    Balog, M., Sagalík, P., Hnatko, M., Lencés, Z., Monteverde, F., Keckes, J. & Huang, J.-L., 2005, In: Journal of the European Ceramic Society. 25, p. 529-534

    Research output: Contribution to journal › Article › Research › peer-review

  82. Published

    Nassgewinnung von Sand und Kies im Einklang mit der Natur - Fallbeispiele aus der Praxis: Salzburger Sand- und Kieswerke

    Tiess, G. & Holliber, T., 2005, In: Berg- und hüttenmännische Monatshefte : BHM. p. 48-51

    Research output: Contribution to journal › Article › Research › peer-review

  83. Published

    Negative refraction in 2d square lattice photonic crystals at millimetre waves

    Meisels, R. & Kuchar, F., 2005.

    Research output: Contribution to conference › Poster › Research › peer-review

  84. Published

    Neogyroporella? gawlicki n.sp., a new Dasycladale from the Upper Jurassic-Lower Cretaceous "Lärchberg Formation" of the Northern Calcareous Alps.-

    Schlagintweit, F., 2005, In: Geologia Croatica. 58, p. 1-15

    Research output: Contribution to journal › Article › Research › peer-review

  85. Published

    Neuentwicklungen in der Fördertechnik

    Kessler, F., 2005, In: Der Absolvent (Zeitschrift des Verbandes der Absolventen der BFS Bruck/Mur & HTBL Kapfenberg). p. 6-9

    Research output: Contribution to journal › Article › Research › peer-review

  86. Published

    Neue scheidungshärtende Warmarbeitsstähle für temperaturwechselbeanspruchte Werkzeuge

    Erlach, S. D. & Clemens, H., 2005

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  87. Published

    Neues in-situ Verfahren

    Mikkola, H., 2005, In: Institutszeitschrift des Institutes für Nachhaltige Abfallwirtschaft und Entsorgungstechnik, Montanuniversität Leoben. p. 3-3

    Research output: Contribution to journal › Article › Research › peer-review

  88. Published

    Neural Modeling of Shear Wave Sonic Logs

    Fruhwirth, R. K. & Steinlechner, S. P., 2005. 4 p.

    Research output: Contribution to conference › Paper › peer-review

  89. Published

    NEW AUTOMATIC BATTERY TEST BENCH FOR ELECTRIC VEHICLES AND PRACTICAL EXPERIENCE WITH OLD BATTERIES

    Weiß, H. & Lang, A., 2005, International Conference on Electrical Drives and Power Electronics. p. 1-7

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  90. Published

    NEW AUTOMATIC MEASUREMENT BENCH FOR ELECTRIC VEHICLES AND PRACTICAL EXPERIENCE

    Weiß, H., TANG, X. & Ying, Y., 2005, International Conference on Electrical Drives and Power Electronics. p. 1-6

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  91. Published

    New data on the tectonic configuration of the Upper Tirolic Dachstein Block (Salzkammergut region, Northern Calcareous Alps, Austria) - the Upper Triassic and Jurassic sedimentary rocks of the Sarsteinalm

    Gawlick, H.-J., Suzuki, H. & Schlagintweit, F., 2005, GeoErlangen. p. 122-123

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  92. Published

    New Stratigraphic, Facies, Structural and CAI Data of the Periadriatic Lineament Area

    Gawlick, H.-J., Missoni, S. & Auer, M., 2005, 7th Workshop on Alpine Geological Studies. p. 33-34

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  93. Published

    Nichteisenmetallurgie - Exkursion der Montanuniversität Leoben nach Spanien und Portugal

    Potesser, M., 2005, In: World of metallurgy - Erzmetall : internationale Fachzeitschrift für Metallurgie. 58, p. 226-230

    Research output: Contribution to journal › Article › Research › peer-review

  94. Published

    Nichteisenmetallurgie - Kurzvorstellung ausgewählter Projekte der Automobilindustrie

    Potesser, M., 2005.

    Research output: Contribution to conference › Poster › Research › peer-review

  95. Published

    Niedriglegierte TRIP-Stähle mit reduziertem Aluminiumgehalt - Phasenumwandlung, Gefügeausbildung, mechanische Eigenschaften

    Spenger, F., 2005

    Research output: Thesis › Diploma Thesis

  96. Published

    Niedrigreibungsschichten für Hochleistungskomponenten in der Antriebs- und Motorentechnik

    Mitterer, C., 2005

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  97. Published

    Nitrogen Removal from Steel by DRI Fines Injection

    Anghelina, D., Irons, G. A. & Brooks, A. G., 2005, Iron and Steel Technology Conference, Vol. I. p. 403-412

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  98. Published

    Non-contact full-field strain analysis

    Steinberger, R., Feichter, C. & Major, Z., 2005

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  99. Published

    Non-Destructive material and component testing

    Fauster, E., Steinberger, R. & Major, Z., 2005

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  100. Published

    Non-Metallic Inclusions in High-Manganese-Alloy Steels

    Gigacher, G., Krieger, W., Pjotr, S. & Thomser, C., 2005, In: Steel research international. 76, p. 644-649

    Research output: Contribution to journal › Article › Research › peer-review

  101. Published

    Norican Steel - An Assessment of the Archaeological Finds at the Magdalensberg Site, Carinthia, Compared to the "Celtic Trove" of Gründberg Hill, Linz

    Presslinger, H., 2005, In: Steel research international. 76, p. 666-671

    Research output: Contribution to journal › Article › Research › peer-review

Previous 1...250 251 252 253 254 255 256 257 ...302 Next
View graph of relations

Contact information

Franz-Josef-Strasse 18, 8700 Leoben
Austria
  • Main phone number: +43 3842 402