Montanuniversität

Organisational unit: University

Publications / Theses

  1. 2020
  2. Published

    Critical evaluation and thermodynamic modeling of the Fe–P and Fe–C–P system

    Bernhard, M. C., Kang, Y.-B., Presoly, P., Gheribi, A. & Bernhard, C., 15 Jun 2020, In: Calphad: Computer Coupling of Phase Diagrams and Thermochemistry. 70.2020, September, 101795.

    Research output: Contribution to journalArticleResearchpeer-review

  3. Published

    Extraordinary high-temperature behavior of electrically conductive Hf7B23Si22C6N40 ceramic film

    Zeman, P., Zuzjaková, Čerstvý, R., Houška, J., Shen, Y., Todt, J., Jiang, J., Daniel, R., Keckes, J., Meletis, E. I. & Vlček, J., 15 Jun 2020, In: Surface and Coatings Technology. 391.2020, 15 June, 8 p., 125686.

    Research output: Contribution to journalArticleResearchpeer-review

  4. Published

    Fracture properties of thin film TiN at elevated temperatures

    Buchinger, J., Löfler, L., Ast, J., Wagner, A., Chen, Z., Michler, J., Zhang, Z., Mayrhofer, P. H., Holec, D. & Bartosik, M., 13 Jun 2020, In: Materials & design. 194.2020, September, p. 1-10 10 p., 108885.

    Research output: Contribution to journalArticleResearchpeer-review

  5. Published

    Arsenotučekite, Ni18Sb3AsS16, a new mineral from the Tsangli chromitites, Othrys ophiolite, Greece

    Zaccarini, F., Bindi, L., Tsikouras, B., Grammatikopoulos, T., Stanley, C. J. & Garuti, G., 12 Jun 2020, In: Mineralogy and Petrology. 114.2020, October, p. 435-442 8 p.

    Research output: Contribution to journalArticleResearchpeer-review

  6. Published

    Optimization of a leaching process for pulverized metal-containing residues

    Gerold, E., Luidold, S. & Antrekowitsch, H., 12 Jun 2020, 2019 Sustainable Industrial Processing Summit and Exhibition. Vol. 4. p. 65-72 8 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  7. E-pub ahead of print

    Impact of poroelastic effects on the inversion of fracture properties from AVOAz data in HTI media

    Barbosa, N. D., Köpke, C., Caspari, E., Rubino, J. G., Irving, J. & Holliger, K., 11 Jun 2020, (E-pub ahead of print) In: Geophysics.

    Research output: Contribution to journalArticleResearchpeer-review

  8. Published

    Brennerversuchseinrichtung

    Spijker, C., Doschek-Held, K. & Raupenstrauch, H., 10 Jun 2020, In: Berg- und hüttenmännische Monatshefte : BHM. 165.2020, 7, p. 312-314 3 p.

    Research output: Contribution to journalArticleResearch

  9. Published

    Geochemical discrimination of intrusions in the Choran Cu-Au deposit, Iran, using silicate chemistry

    Zarasvandi, A., Tashi, M., Raith, J., Rezaei, M., Mousivand, F. & Saki, A., 10 Jun 2020, In: Journal of geochemical exploration. 217.2020, October, 15 p., 106589.

    Research output: Contribution to journalArticleResearchpeer-review

  10. Published

    Industrielle Energietechnik

    Berger, G., Holzer, A. & Raupenstrauch, H., 8 Jun 2020, In: Berg- und hüttenmännische Monatshefte : BHM. 165.2020, 7, p. 320-323 4 p.

    Research output: Contribution to journalArticleResearch

  11. Published

    Microstructural Change during the Interrupted Quenching of the AlZnMg(Cu) Alloy AA7050

    Kremmer, T., Dumitraschkewitz, P., Pöschmann, D., Ebner, T., Uggowitzer, P., Kolb, G. & Pogatscher, S., 4 Jun 2020, In: Materials. 13, 11, 11 p., 2554.

    Research output: Contribution to journalArticleResearchpeer-review

  12. Published
  13. Published

    Recent trends in applying ortho-nitrobenzyl esters for the design of photo-responsive polymer networks

    Romano, A., Roppolo, I., Rossegger, E., Schlögl, S. & Sangermano, M., 2 Jun 2020, In: Materials. 13, 12, p. 1-26 26 p., 2777.

    Research output: Contribution to journalReview articlepeer-review

  14. Published

    Exploring and modeling the magma–hydrothermal regime

    Eichelberger, J., Kiryukhin, A., Mollo, S., Tsuchiya, N. & Villeneuve, M., 1 Jun 2020, In: Geosciences (Switzerland). 10, 6, p. 1-6 6 p., 0234.

    Research output: Contribution to journalEditorialpeer-review

  15. Published

    Introduction of a new in-situ measurement system for the study of touch-feel relevant surface properties

    Ules, T., Hausberger, A., Grießer, M., Schlögl, S. & Gruber, D. P., 1 Jun 2020, In: Polymers. 12.2020, 6, 1380.

    Research output: Contribution to journalArticleResearchpeer-review

  16. Published

    Open-cell tungsten nanofoams: Chloride ion induced structure modification and mechanical behavior

    Zhao, M., Pfeifenberger, M. J. & Kiener, D., 1 Jun 2020, In: Results in Physics. 17, 103062.

    Research output: Contribution to journalArticleResearchpeer-review

  17. Published

    Structural Features and Combustion Behaviour of Waste Bamboo Chopstick Chars Pyrolysed at Different Temperatures

    Xu, R., Deng, S., Wang, W., Schenk, J. & Wang, F., 1 Jun 2020, In: BioEnergy research . 13.2020, 2, p. 439-451 13 p.

    Research output: Contribution to journalArticleResearchpeer-review

  18. Published

    Studententeam nahm an NASA-Challenge teil

    Fimbinger, E., 1 Jun 2020, In: Stadtmagazin / Leoben. 2020, 6, p. 10 1 p.

    Research output: Contribution to journalArticleTransfer

  19. Published

    Testing of electric submersible pump behaviour for polymer fluids

    Langbauer, C., Pratscher, H.-P., Ciufu, A., Hoy, M. G., Marschall, C. & Pongratz, R., 1 Jun 2020, In: Oil gas European magazine.

    Research output: Contribution to journalArticleResearchpeer-review

  20. Published

    Ultra-High Through-Cure of (Meth) Acrylate Copolymers via Photofrontal Polymerization

    Ebner, C., Mitterer, J., Eigruber, P., Stieger, S., Rieß, G. & Kern, W., 1 Jun 2020, In: Polymers. 12, 6, 1291.

    Research output: Contribution to journalArticleResearchpeer-review

  21. Published

    Adhesives for “debonding-on-demand”: Triggered release mechanisms and typical applications

    Bandl, C., Kern, W. & Schlögl, S., Jun 2020, In: International Journal of Adhesion and Adhesives. 99, 102585.

    Research output: Contribution to journalArticleResearchpeer-review

  22. Published
  23. Published

    Brandgefährlicher Elektroabfall

    Pomberger, R., Jun 2020, In: Brand aus . p. 10 - 13

    Research output: Contribution to journalArticleResearch

  24. Published

    CASE STUDY ON ENHANCED LANDFILL MINING AT MONT-SAINT-GUIBERT LANDFILL IN BELGIUM: MECHANICAL PROCESSING, PHYSICO-CHEMICAL AND MINERALOGICAL CHARACTERISATION OF FINE FRACTIONS <4.5 MM

    Vollprecht, D., Hernández Parrodi, J. C., Lucas, H. I. & Pomberger, R., Jun 2020, In: Detritus. 10, June, p. 26-43 18 p.

    Research output: Contribution to journalArticleResearchpeer-review

  25. Published
  26. Published

    End-of-Life management of photovoltaic panels in Austria: current situation and outlook

    Dobra, T., Wellacher, M. & Pomberger, R., Jun 2020, In: Detritus. 10, June, p. 75 - 81 7 p.

    Research output: Contribution to journalArticleResearchpeer-review

  27. Published
  28. Published

    Granulation von Hochofenschlacke im Zinnbad – Versuchsreihe 2

    Wibner, S., Jun 2020

    Research output: Book/ReportCommissioned reportResearch

  29. Published

    Impact of crystal sedimentation and viscoplastic semi-solid dynamics on macrosegregation

    Gomes Rodrigues, C., Ludwig, A. (Co-editor), Wu, M. (Co-editor), Kharicha, A. (Co-editor) & Vakhrushev, A. (Co-editor), Jun 2020, IOP Conf. Series: Mater.Sci.Eng.. Vol. 861.

    Research output: Chapter in Book/Report/Conference proceedingOther chapter contributionResearch

  30. Published

    Influence of crystal fragmentation on the formation of microstructure and macrosegregation during directional solidification under forced convection condition

    Zhang, H., Wu, M. (Co-editor), Zhang, Z. (Co-editor), Ludwig, A. (Co-editor) & Kharicha, A. (Co-editor), Jun 2020, IOP conf. Series: Mater. Sci. Eng.. Vol. 861.

    Research output: Chapter in Book/Report/Conference proceedingOther chapter contributionResearch

  31. Published

    Modeling mixed columnar-equiaxed solificiation of Sn-10wt% alloy under forced convection driven by travelling magnetic stirring

    Zhang, Z., Wu, M. (Co-editor), Zhang, H. (Co-editor), Karimi Sibaki, E. (Co-editor), Ludwig, A. (Co-editor) & Kharicha, A. (Co-editor), Jun 2020, IOP Conf. Series: Mater. Sci. Eng. . Vol. 861.

    Research output: Chapter in Book/Report/Conference proceedingOther chapter contributionResearch

  32. Published

    Modelling of shear bands during solidification

    Ludwig, A., Gomes Rodrigues, C. (Co-editor), Wu, M. (Co-editor) & Kharicha, A. (Co-editor), Jun 2020, IOP Conf. Series: Mater. Sci.Eng. . online, Vol. 861.

    Research output: Chapter in Book/Report/Conference proceedingOther chapter contributionResearch

  33. Published

    Modelling viscoplastic behavior of solidifying shell under applied electromagnetic breaking during continuous casting

    Vakhrushev, A., Kharicha, A. (Co-editor), Wu, M. (Co-editor), Ludwig, A. (Co-editor), Nitzl, G. (Co-editor), Tang, Y. (Co-editor), Hackl, G. (Co-editor), Watzinger, J. (Co-editor) & Gomes Rodrigues, C. (Co-editor), Jun 2020, IOP Conf. Series: mater. Sci. Eng.. Vol. 861.

    Research output: Chapter in Book/Report/Conference proceedingOther chapter contributionResearch

  34. Published

    Numerical investigation of an in-situ observed flow regimes during solidification of an NH 4Cl - 70wt%H 2O solution

    Wu, M. & Stefan-Kharicha, M. (Co-editor), Jun 2020, IOP Conf. Series: Mater. Sci. Eng.. Vol. 861.

    Research output: Chapter in Book/Report/Conference proceedingOther chapter contributionResearch

  35. Published
  36. Published

    Thickness Dependence of crack initiation and propagation in stacks for piezoelectric microelectromechanical systems

    Coleman, K., Bermejo, R., Leguillon, D. & Trolier-McKinstry, S., Jun 2020, In: Acta Materialia. 191, p. 245-252

    Research output: Contribution to journalArticleResearchpeer-review

  37. Published

    Indentation response of a superlattice thin film revealed by in-situ scanning X-ray nanodiffraction

    Todt, J., Krywka, C., Zhang, Z. L., Mayrhofer, P. H., Keckes, J. & Bartosik, M., 29 May 2020, In: Acta Materialia. 195.2020, 15 August, p. 425-432 8 p.

    Research output: Contribution to journalArticleResearchpeer-review

  38. Published

    A comprehensive skills catalogue for the raw materials sector and the structure of raw materials education worldwide

    Hartlieb, P., Jorda Bordehore, L., Regueiro y González-Barros, M., Correia, V. & Vidovic, J., 28 May 2020, In: Mining Technology: Transactions of the Institute of Mining and Metallurgy. 129.2020, 2, p. 82-94 13 p.

    Research output: Contribution to journalArticleResearchpeer-review

  39. Published

    Characterization of alloying components in galvanic anodes as potential environmental tracers for heavy metal emissions from offshore wind structures

    Reese, A., Voigt, N., Zimmermann, T., Irrgeher, J. & Proefrock, D., 28 May 2020, In: Chemosphere. 257.2020, October, 10 p., 127182.

    Research output: Contribution to journalArticleResearchpeer-review

  40. Published

    Editorial for the Special Issue “Innovative and Applied Research on Platinum-Group and Rare Earth Elements”

    Economou Eliopolous, M., Zaccarini, F. & Garuti, G., 28 May 2020, In: Minerals. 10.2020, 6, 3 p., 493.

    Research output: Contribution to journalArticleResearchpeer-review

  41. Published

    Fluid-phase topology of complex displacements in porous media

    Ott, H., Kharrat, A., Borji, M. & Arnold, P., 28 May 2020, In: Physical review research. 2, 2, 11 p.

    Research output: Contribution to journalArticleResearchpeer-review

  42. Published

    Hierarchically organized materials with ordered mesopores: adsorption isotherm and adsorption-induced deformation from small-angle scattering

    Ludescher, L., Morak, R., Braxmeier, S., Putz, F., Hüsing, N., Reichenauer, G. & Paris, O., 28 May 2020, In: Physical Chemistry Chemical Physics. 2020, 22, p. 12713-12723 11 p.

    Research output: Contribution to journalArticleResearchpeer-review

  43. Published

    Determination of Martensite Start Temperature of High‐Speed Steels Based on Thermodynamic Calculations

    Platl, J., Leitner, H., Turk, C. & Schnitzer, R., 27 May 2020, In: Steel research international. 91.2020, 8, 8 p., 2000063.

    Research output: Contribution to journalArticleResearchpeer-review

  44. Published

    Validation Study on the Statistical Size Effect in Cast Aluminium

    Oberreiter, M., Pomberger, S., Leitner, M. & Stoschka, M., 27 May 2020, In: Metals : open access journal . 10.2020, 6, p. 710 22 p.

    Research output: Contribution to journalArticleResearchpeer-review

  45. Published

    Investigation of production data from donneês campagne

    Leuchtenmüller, M., 25 May 2020, 13 p.

    Research output: Book/ReportCommissioned reportTransfer

  46. Published
  47. Published

    Room temperature recovery of cryogenically deformed aluminium alloys

    Gruber, B., Grabner, F., Falkinger, G., Schökel, A., Spieckermann, F., Uggowitzer, P. J. & Pogatscher, S., 23 May 2020, In: Materials & design. 193.2020, August, 108819.

    Research output: Contribution to journalArticleResearchpeer-review

  48. Published

    Single-step fabrication and work function engineering of Langmuir-Blodgett assembled few-layer graphene films with Li and Au salts

    Milošević, I. R., Vasić, B., Matković, A., Vujin, J., Aškrabić, S., Kratzer, M., Griesser, T., Teichert, C. & Gajić, R., 21 May 2020, In: Scientific Reports. 10, 1, 8476.

    Research output: Contribution to journalArticleResearchpeer-review

  49. Published
  50. Published

    A Production Method for Standardized Continuous Fiber Reinforced FFF Filament

    Aburaia, M., Bucher, C., Lackner, M., Gonzalez-Gutierrez, J., Zhang, H. & Lammer, H., 20 May 2020, In: Biomaterials and Medical Applications. 4.2020, 1, 9 p.

    Research output: Contribution to journalArticleResearchpeer-review

  51. Published

    Arsenic redox transformations and cycling in the rhizosphere of Pteris vittata and Pteris quadriaurita

    Wagner, S., Hoefer, C., Puschenreiter, M., Wenzel, W. W., Oburger, E., Hann, S., Robinson, B., Kretzschmar, R. & Santner, J., 20 May 2020, In: Environmental and Experimental Botany. 177.2020, September, 12 p., 104122.

    Research output: Contribution to journalArticleResearchpeer-review