Chair of Polymer Processing (350)

Organisational unit: Chair

151 - 200 out of 768Page size: 50

Publications / Theses

  1. 2018
  2. Published

    Material Extrusion Additive Manufacturing for Photocatalytic Applications

    Gonzalez-Gutierrez, J., Jiang, W., Lichal, C., Schuschnigg, S., Huang, L. & Holzer, C., 19 Apr 2018, p. 1. 1 p.

    Research output: Contribution to conference › Poster › Research

  3. Published

    Material Extrusion Additive Manufacturing for Photocatalytic Applications

    Gonzalez-Gutierrez, J., Jiang, W., Lichal, C., Schuschnigg, S., Huang, L. & Holzer, C., 19 Apr 2018, 27. Leobener Kunststoff-Kolloquium: Print & Coat- Polymere in Druck- und Beschichtungstechnologien. Kern, W. (ed.). Leoben, Vol. 27. p. 259-260 2 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  4. Published

    Polypropylene/Cellulose Composites for Material Extrusion Additive Manufacturing

    Kaynak, B., Spörk, M., Shirole, A., Ziegler, W. & Sapkota, J., 14 Apr 2018, In: Macromolecular materials and engineering. 12, p. 1800037

    Research output: Contribution to journal › Article › Research › peer-review

  5. Published

    Influence of strand orientation on mechanical properties in near homogeneous FFF produced PLA parts

    Wiener, J., Arbeiter, F., Spörk, M., Gosch, A. & Pinter, G. G., 27 Mar 2018.

    Research output: Contribution to conference › Poster › Research

  6. Published

    Bestimmung der thermodynamischen Stoffdaten für ein TPU-Compound der Type

    Duretek, I., 13 Mar 2018, 11 p.

    Research output: Book/Report › Commissioned report › Research

  7. Published

    Bestimmung der rheologischen Stoffdaten für ein TPU-Compound mit Farbmasterbatch

    Duretek, I., 9 Mar 2018, 8 p.

    Research output: Book/Report › Commissioned report › Research

  8. Published

    Determination of the pvT-behaviour for two pharmaceutical mixtures

    Duretek, I. & Winkler, S., 15 Feb 2018, 6 p.

    Research output: Book/Report › Commissioned report › Research

  9. Published

    Bestimmung der thermodynamischen Stoffdaten für ein TPO-Compound

    Duretek, I., 8 Feb 2018, 8 p.

    Research output: Book/Report › Commissioned report › Research

  10. Published

    Fracture mechanical characterization and lifetime estimation of near-homogeneous components produced by fused filament fabrication

    Arbeiter, F., Spoerk, M., Wiener, J., Gosch, A. & Pinter, G., 5 Jan 2018, In: Polymer Testing. 66.2018, April, p. 105-113 9 p.

    Research output: Contribution to journal › Article › Research › peer-review

  11. Published

    Optimisation of the Mechanical Properties and Processing of Polypropylene and Poly(Lactic Acid) Parts Produced by Extrusion-Based Additive Manufacturing

    Spörk, M., 2018

    Research output: Thesis › Doctoral Thesis

  12. 2017
  13. Published

    Calculation of the contact Angle of Polymer Melts on Tool Surfaces from Viscosity Parameters

    Zitzenbacher, G., Dirnberger, H., Längauer, M. & Holzer, C., 30 Dec 2017, In: Polymers / Molecular Diversity Preservation International. 10, 38, 12 p.

    Research output: Contribution to journal › Article › Research › peer-review

  14. Published

    Optimization of Mechanical Properties of Glass-Spheres-Filled Polypropylene Composites for Extrusion-Based Additive Manufacturing

    Spörk, M., Savandaiah, C., Arbeiter, F., Sapkota, J. & Holzer, C., 26 Dec 2017, In: Polymer Composites. 83, p. 1-14 14 p.

    Research output: Contribution to journal › Article › Research › peer-review

  15. Published

    Special Binder Systems for Metal Powders in Highly Filled Filaments for Fused Filament Fabrication

    Gonzalez-Gutierrez, J., Cano Cano, S., Ecker, J., Arbeiter, F., Burkhardt, C., Hampel, S., Kukla, C. & Holzer, C., 14 Dec 2017, p. 1. 1 p.

    Research output: Contribution to conference › Poster › Research

  16. Published

    Special Binder Systems for the Use with Metal Powders for Highly Filled Filaments for Fused Filament Fabrication

    Gonzalez-Gutierrez, J., Kukla, C., Arbeiter, F. & Holzer, C., 14 Dec 2017, 33rd Annual Meeting of the Polymer Processing Society. Cancun, Mexico, Vol. 33. 1 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  17. Published

    3D Printing of Polymer-Bonded Rare-Earth Magnets with a Variable Magnetic Compound Fraction for a Predefined Stray Field

    Huber, C., Abert, C., Bruckner, F., Groenefeld, M., Schuschnigg, S., Teliban, I., Vogler, C., Wautischer, G., Windl, R. & Suess, D., 1 Dec 2017, In: Scientific Reports. 7, 1, 9419.

    Research output: Contribution to journal › Article › Research › peer-review

  18. Published

    Isotropic NdFeB hard magnets: MIM production using recycled powders with and without Nd additions

    Burkhardt, C., Weber, O., Podmiljsak, B., Gonzalez-Gutierrez, J., Kukla, C., Degri, M., Harris, I. R. & Walton, A., 1 Dec 2017, In: Powder injection moulding international. 11, 4, p. 75-81 7 p.

    Research output: Contribution to journal › Article › Research

  19. Published

    3D printing conditions determination for feedstock used in fused filament fabrication (FFF) of 17-4PH stainless steel parts

    Gonzalez-Gutierrez, J., Godec, D., Guran, R., Spörk, M., Kukla, C. & Holzer, C., 15 Nov 2017, In: Metalurgija : casopis Izdaje Tehnoloski Fakultet Sveucilista u Zagrebu, Odjeli u Sisku, Institut za Metalurgiju i Zeljezara Sisak = Metallurgy. 57, 1-2, p. 117-120 4 p., 669.15:621.775:669.015:66.049.4:621.385.833=111.

    Research output: Contribution to journal › Article › Research › peer-review

  20. Published

    Cellulose Nanocomposites: Fundamental Understanding of the Mechanical Reinforcement of Cellulose Nanocrystals Reinforced Polymer Nanocomposites as a Function of Aspect Ratio

    Sapkota, J., 15 Nov 2017, WerWasWo.Forschung@MUL 2017. Schuschnigg, S. (ed.). 6 ed. Leoben, Austria, p. 189 1 p.

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Transfer

  21. Published

    Feedstocks for metal injection moulding: Effect of particle charcateristics and binder composition on the rheological properties and the morphology of metal injection moulding feedstocks

    Kukla, C. & Gonzalez-Gutierrez, J., 15 Nov 2017, WerWasWo.Forschung@MUL 2017. Schuschnigg, S. (ed.). 6 ed. Leoben, Austria, p. 127 1 p.

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Transfer

  22. Published

    FFF Material und Prozess

    Schuschnigg, S., 15 Nov 2017, WerWasWo.Forschung@MUL 2017. Schuschnigg, S. (ed.). 6 ed. p. 200 1 p.

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research

  23. Published

    Flexible Production via 3D Printing: Development of a sustainable, stable and flexible manufacturing process (3D printing) for complex metallic and ceramic components in a waste-free but industrially viable process

    Sapkota, J. & Gonzalez-Gutierrez, J., 15 Nov 2017, WerWasWo.Forschung@MUL 2017. Schuschnigg, S. (ed.). 6 ed. Leoben, Austria, p. 190 1 p.

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Transfer

  24. Published

    Resource Efficient Production of Magnets: Utilization of recycled rare earth magnetic material for the production of magnets with complex structure and geometry via additive manufacturing and metal injection moulding

    Gonzalez-Gutierrez, J. & Kukla, C., 15 Nov 2017, WerWasWo.Forschung@MUL 2017. Schuschnigg, S. (ed.). 6 ed. Leoben, Austria, p. 78 1 p.

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Transfer

  25. Published

    WerWasWo.Forschung@MUL 2017: Forschungsprojekte, vorgestellt anlässlich der Posterpräsentation WerWasWo.Forschung@MUL

    Schuschnigg, S., 15 Nov 2017, 6 ed. Leoben: Eigenverlag. 303 p.

    Research output: Book/Report › Anthology › Research

  26. Published

    Effect of the printing bed temperature on the adhesion of parts produced by fused filament fabrication

    Spörk, M., Gonzalez-Gutierrez, J., Sapkota, J., Schuschnigg, S. & Holzer, C., 8 Nov 2017, In: Plastics, rubber and composites. 47, 1, p. 17-24 8 p.

    Research output: Contribution to journal › Article › Research › peer-review

  27. Published

    Neues Werkzeug für die Messung der Entformungskräfte

    Lucyshyn, T. & Holzer, C., 1 Nov 2017, In: GAK (Gummi Fasern Kunststoffe). 11/2017, Jahrgang 70, p. 704-708 5 p.

    Research output: Contribution to journal › Article › Research

  28. Published

    The production of magnets by FFF - Fused Filament Fabrication

    Kukla, C., Gonzalez-Gutierrez, J., Burkhardt, C., Weber, O. & Holzer, C., 1 Oct 2017, Euro PM2017 Congress & Exhibition. Milan, Italy: European Powder Metallurgy Association, 6 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  29. Published

    Differential apoptotic response of MC3T3-E1 pre-osteoblasts to biodegradable magnesium alloys in an in vitro direct culture model

    Bonyadi Rad, E., Mostofi, S., Katschnig, M., Schmutz, P., Pawelkiewicz, M., Willumeit-Römer, R., Schäfer, U. & Weinberg, A., 5 Sept 2017, In: Journal of materials science / Materials in medicine. 28, 155, 11 p.

    Research output: Contribution to journal › Article › Research › peer-review

  30. Published

    Polymer nanocomposites with cellulose nanocrystals made by co-precipitation

    Natterodt, J. C., Shirole, A., Sapkota, J., Zoppe, J. & Weder, C., 9 Aug 2017, In: Journal of Applied Polymer Science. 134

    Research output: Contribution to journal › Article › Research › peer-review

  31. Published

    Influence of Melt Compounding on Blast Furnace Slag Filled PP Compounds: A Comparative Study

    Mostafa, A., Pacher, G., Lucyshyn, T., Holzer, C., Krischey, E., Flachberger, H., Fritz, B. & Laske, S., Aug 2017, In: International polymer processing. 32, 4, p. 446-454 9 p.

    Research output: Contribution to journal › Article › Research › peer-review

  32. E-pub ahead of print

    Shrinkage and Warpage Optimization of Expanded-Perlite-Filled Polypropylene Composites in Extrusion-Based Additive Manufacturing

    Spörk, M., Sapkota, J., Weingrill, G., Fischinger, T., Arbeiter, F. & Holzer, C., 4 Jul 2017, (E-pub ahead of print) In: Macromolecular materials and engineering.

    Research output: Contribution to journal › Article › Research › peer-review

  33. Published

    Development of highly-filled polymer compounds for fused filament fabrication of ceramics and solvent debinding

    Cano Cano, S., Gonzalez-Gutierrez, J., Sapkota, J., Kukla, C. & Holzer, C., 27 Jun 2017.

    Research output: Contribution to conference › Presentation › Research

  34. E-pub ahead of print

    Parametric optimization of intra- and inter-layer strengths in parts produced by extrusion-based additive manufacturing of poly(lactic acid)

    Spörk, M., Arbeiter, F., Cajner, H., Sapkota, J. & Holzer, C., 26 Jun 2017, (E-pub ahead of print) In: Journal of Applied Polymer Science. 134, 39, 15 p., 45401.

    Research output: Contribution to journal › Article › Research › peer-review

  35. Published

    SHAPING, DEBINDING AND SINTERING OF STEEL COMPONENTS VIA FUSED FILAMENT FABRICATION

    Gonzalez-Gutierrez, J., Godec, D., Kukla, C., Schlauf, T., Burkhardt, C. & Holzer, C., 8 Jun 2017, 16th International Scientific Conference on Production Engineering. Udiljak, T. (ed.). Zadar, Croatia, p. 99 104 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  36. Published

    Fused Filament Fabrication (FFF) of PIM Feedstocks

    Kukla, C., Gonzalez-Gutierrez, J., Cano Cano, S., Hampel, S., Burkhardt, C., Moritz, T. & Holzer, C., 7 Jun 2017, ACTAS DEL VI CONGRESO NACIONAL DE PULVIMETALURGIA Y I CONGRESO IBEROAMERICANO DE PULVIMETALURGIA. Herranz, G., Ferrari, B. & Cabrera, J. M. (eds.). Ciudad Real, Spain, Vol. 6. p. 1-6 6 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  37. Published

    Fused Filament Fabrication for the production of metal and/or ceramic parts and feedstocks therefore

    Kukla, C., Gonzalez-Gutierrez, J., Cano Cano, S., Burkhardt, C., Hampel, S., Moritz, T. & Holzer, C., 29 May 2017, 19th Plansee Seminar. Reutte, Austria: Plansee AG, Vol. 19. 9 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  38. Published

    Fused Filament Fabrication for the Production of Metal and/or Ceramic Parts and Feedstocks Therefore

    Kukla, C., Gonzalez-Gutierrez, J., Cano Cano, S., Burkhardt, C., Hampel, S., Moritz, T. & Holzer, C., 29 May 2017. 1 p.

    Research output: Contribution to conference › Poster › Research

  39. Published

    FILLER CONTENT AND PROPERTIES OF HIGHLY FILLED FILAMENTS FOR FUSED FILAMENT FABRICATION OF MAGNETS

    Gonzalez-Gutierrez, J., Duretek, I., Arbeiter, F., Kukla, C. & Holzer, C., 9 May 2017, ANTEC® 2017. Anaheim, California, USA, 4 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  40. Published

    Properties of glass filled polypropylene for Fused Filament Fabrication

    Spörk, M., Savandaiah, C., Arbeiter, F., Schuschnigg, S. & Holzer, C., May 2017.

    Research output: Contribution to conference › Paper › peer-review

  41. Published

    MOLECULAR DYNAMICS SIMULATIONS AS A TOOL FOR MATERIAL SELECTION IN METAL INJECTION MOULDING FEEDSTOCKS

    Gooneie, A., Gonzalez-Gutierrez, J., Kukla, C. & Holzer, C., 24 Apr 2017, CONFERENCE PROCEEDINGS ICIT&APT 2017 10th International Conference on Industrial Tools and Advanced Processing Technologies. Hancic, A. & Grum, J. (eds.). Ljubljana, Slovenia, Vol. 10. 1 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  42. Published

    The SDS process: A viable way for the production of metal parts

    Kukla, C., Gonzalez-Gutierrez, J., Hampel, S., Burkhardt, C. & Holzer, C., 24 Apr 2017, CONFERENCE PROCEEDINGS ICIT&APT 2017 10th International Conference on Industrial Tools and Advanced Processing Technologies. Hancic, A. & Grum, J. (eds.). Vol. 10. 1 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  43. Published

    Metal Injection Moulding for the Production of Recycled Rare Earth Magnets

    Gonzalez-Gutierrez, J., Walton, A., Schlauf, T., Burkhardt, C., Kukla, C., Krispin, M. & Holzer, C., 20 Apr 2017. 1 p.

    Research output: Contribution to conference › Poster › Research

  44. E-pub ahead of print

    The effects of e-beam crosslinking of LDPE on the permeation of hydrocarbons

    Berger, K., Keimel, C., Helfer, E., Haar, B., Mattausch, H., Riess, G. & Kern, W., 6 Mar 2017, (E-pub ahead of print) In: Journal of Applied Polymer Science. 134.2017, 25, 8 p., 44968.

    Research output: Contribution to journal › Article › Research › peer-review

  45. Published

    Rheology of PIM feedstocks

    Kukla, C., Duretek, I., Gonzalez-Gutierrez, J. & Holzer, C., 9 Feb 2017, In: Metal Powder Report. 72, 1, p. 39-44 6 p.

    Research output: Contribution to journal › Article › Research

  46. Published

    A refined model for the mechanical properties of polymer composites with nanorods having different length distributions

    Sapkota, J., Gooneie, A., Shirole, A. & Martinez Garcia, J. C., 2017, In: Journal of Applied Polymer Science.

    Research output: Contribution to journal › Article › Research › peer-review

  47. Published

    A Review of Multiscale Computational Methods in Polymeric Materials

    Gooneie, A., Schuschnigg, S. & Holzer, C., 2017, In: Polymers / Molecular Diversity Preservation International. 9, 1, 16.

    Research output: Contribution to journal › Article › Research › peer-review

  48. Published

    Effect of Particle Size on the Properties of Highly-Filled Polymers for Fused Filament Fabrication

    Kukla, C., Gonzalez-Gutierrez, J., Duretek, I., Schuschnigg, S. & Holzer, C., 2017.

    Research output: Contribution to conference › Paper › peer-review

  49. Published

    Influence of Compounding Technology on Rheological, Thermal and Mechanical Behavior of Blast Furnace Slag Filled Polystyrene Compounds

    Mostafa, A., Pacher, G., Lucyshyn, T., Holzer, C., Flachberger, H., Krischey, E., Fritz, B. & Laske, S., 2017, In: AIP Conference Proceedings. 1914

    Research output: Contribution to journal › Article › Research › peer-review

  50. Published

    Influence of Nanocellulose Type and Their Length Distribution in Mechanical Reinforcement of Multifiller Nanocomposites

    Sapkota, J., Shirole, A., Foster, E. J., Martinez Garcia, J. C., Lattuada, M. & Weder, C., 2017.

    Research output: Contribution to conference › Poster › Research

  51. Published

    Length controlled kinetics of self-assembly of bidisperse nanotubes/nanorods in polymers

    Gooneie, A., Sapkota, J., Shirole, A. & Holzer, C., 2017, In: Polymer. 118

    Research output: Contribution to journal › Article › Research › peer-review

  52. Published

    Material Flow Data for Numerical Simulation of Powder Injection Molding

    Duretek, I. & Holzer, C., 2017, In: Universal Journal of Materials Science. 5, 1, p. 7-14 7 p.

    Research output: Contribution to journal › Article › Research › peer-review

Previous 1 2 3 4 5 6 7 8 ...16 Next
View graph of relations

Contact information

Otto Glöckel-Straße 2/III, 8700 Leoben
  • Main phone number: +43 3842 402 3501