Chair of Polymer Processing (350)

Organisational unit: Chair

101 - 150 out of 768Page size: 50

Publications / Theses

  1. 2019
  2. Published

    Interactions between polymers and surfaces in extrusion processes

    Zitzenbacher, G., 2019

    Research output: Thesis › Habilitation thesis › peer-review

  3. Published

    Mechanical Characterization of PMMA Produced by Fused Filament Fabrication as a Potential Material for Cranial Bone Reconstruction

    Petersmann, S., Spörk, M., Lang, M. C., Moser, C., Pinter, G. G. & Arbeiter, F., 2019, Abstract Book of the First European Conference on Structural Integrity of Additively Manufactured Materials. 5 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  4. Published

    Prozessführung und -optimierung der chemischen Schaumextrusion von PET und anschließender Verarbeitung im ISBM-Prozess

    Roitner, J., 2019

    Research output: Thesis › Master's Thesis

  5. Published

    Systematic investigation of tightness of connectors in the automotive industry

    Hubmann, M., 2019

    Research output: Thesis › Master's Thesis

  6. Published

    Untersuchung der Fließeigenschaften von einem thermoplastischen Elastomer unter praxisnahen Bedingungen

    Maier, C., 2019

    Research output: Thesis › Master's Thesis

  7. 2018
  8. Published

    Designing formulation variables of extrusion-based manufacturing of carbon black conductive polymer composites for piezoresistive sensing

    Duan, L., Spörk, M., Wieme, T., Cornillie, P., Xia, H., Zhang, J., Cardon, L. & D'hooge, D. R., 13 Dec 2018, In: Composites science and technology. 171.2019, 8 February, p. 78-85 8 p.

    Research output: Contribution to journal › Article › Research › peer-review

  9. Published

    Vergleichende rheologische Messungen an Proben aus einem ABS-, POM-, PP- und PA6-Compound

    Duretek, I., 12 Dec 2018, 12 p.

    Research output: Book/Report › Commissioned report › Research

  10. Published

    Optimization of fiber prediction model coefficients in injection molding simulation based on micro computed tomography

    Morak, M., Tscharnuter, D., Lucyshyn, T., Hahn, W., Göttlinger, M., Kummer, M., Steinberger, R. & Gross, T., 5 Dec 2018, In: Polymer engineering and science. 59.2019, s2, p. E152-E160 9 p.

    Research output: Contribution to journal › Article › Research › peer-review

  11. Published

    Bestimmung der thermischen und rheologischen Stoffdaten für ein Wachs der Type Gemisch 75/25

    Duretek, I., 16 Nov 2018, 10 p.

    Research output: Book/Report › Commissioned report › Research

  12. Published

    Viscoelastic Material Characterization and Modelling of Industrial Rubber Compounds - K-BKZ Model

    Stieger, S., Kerschbaumer, R. C., Haselmann, M., Berger-Weber, G., Fasching, M., Duretek, I., Schuschnigg, S. & Friesenbichler, W., 7 Nov 2018.

    Research output: Contribution to conference › Abstract › peer-review

  13. Published

    Additive Fertigung von metallischen und keramischen Produkten mittels Filamentextrusion

    Holzer, C., 23 Oct 2018, p. 72-75. 4 p.

    Research output: Contribution to conference › Paper › peer-review

  14. Published

    Design and fabrication of monolithic catalyst for plasma-catalytic oxidation of toluene

    Huang, L., Zheng, M., Jiang, W., Shi, L., Gonzalez-Gutierrez, J. & Holzer, C., 20 Oct 2018. 1 p.

    Research output: Contribution to conference › Abstract

  15. Published

    Bestimmung der rheologischen Stoffdaten an fünf verschiedenen thermoplastischen Compounds

    Duretek, I., 10 Oct 2018, 7 p.

    Research output: Book/Report › Commissioned report › Research

  16. Published

    Bestimmung der thermodynamischen und mechanischen Stoffdaten für ein PC-Compound

    Duretek, I., 10 Oct 2018, 18 p.

    Research output: Book/Report › Commissioned report › Research

  17. Published

    Rheology of Highly Filled Polymers

    Kukla, C., Duretek, I., Gonzalez-Gutierrez, J. & Holzer, C., 3 Oct 2018, Polymer Rheology. Rivera-Armenta, J. L. & Salazar-Cruz, B. A. (eds.). London, United Kingdom, p. 153- 173 21 p.

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research

  18. Published

    Viskositätsmessungen an drei PVC-Compounds

    Duretek, I., 1 Oct 2018, 18 p.

    Research output: Book/Report › Commissioned report › Research

  19. Published

    Potential of Extrusion Based 3D-printed Hardmetal and Cermet Parts

    Kitzmantel, M., Lengauer, W., Duretek, I., Schwarz , V., Kukla, C., Lieberwirth, C., Morrison, V., Wilfinger, T. & Neubauer, E., 30 Sept 2018, p. 938-945. 7 p.

    Research output: Contribution to conference › Paper › peer-review

  20. Published

    The consequences of different printing chamber temperatures in extrusion-based additive manufacturing

    Spörk, M., Arbeiter, F., Raguz, I., Traxler, G., Schuschnigg, S., Cardon, L. & Holzer, C., 21 Sept 2018.

    Research output: Contribution to conference › Paper › peer-review

  21. Published

    Influence of filler types onto the viscosity of highly filled polymers.

    Kukla, C., Slemenik Perše, L., Bek, M., Gonzalez-Gutierrez, J. & Holzer, C., 19 Sept 2018, International Conference on Polymers and Moulds Innovations: Conference Proceedings. Pontes, A. (ed.). Guimaraes, Portugal, Vol. 8. 6 p. P120

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  22. Published

    Bestimmung der Stoffdaten an einem PC/ABS-Blend

    Duretek, I., 14 Sept 2018, 11 p.

    Research output: Book/Report › Commissioned report › Research

  23. Published

    Bestimmung der thermodynamischen, rheologischen und mechanischen Stoffdaten an einem PBT "1"

    Duretek, I., 23 Aug 2018, 16 p.

    Research output: Book/Report › Commissioned report › Research

  24. Published

    Bestimmung der thermodynamischen, rheologischen und mechanischen Stoffdaten für PA 6.6

    Duretek, I., 23 Aug 2018, 19 p.

    Research output: Book/Report › Commissioned report › Research

  25. Published

    Vergleichende DSC-Untersuchungen von 3 verschiedenen Dichtungsringen

    Duretek, I., 11 Aug 2018, 10 p.

    Research output: Book/Report › Commissioned report › Research

  26. Published

    Bestimmung der thermodynamischen, rheologischen und mechanischen Stoffdaten an einem PBT "2"

    Duretek, I., 11 Jul 2018, 15 p.

    Research output: Book/Report › Commissioned report › Research

  27. Published

    Bestimmung der rheologischen und thermodynamischen Stoffdaten an einem MIM-Feedstock der Type PM

    Duretek, I., 10 Jul 2018, 16 p.

    Research output: Book/Report › Commissioned report › Research

  28. Published

    Determination of the pvT behavior for one moldable silicone

    Duretek, I., 29 Jun 2018, 8 p.

    Research output: Book/Report › Commissioned report › Research

  29. Published

    Rheological characterization of the four fluoropolymers on the rotational rheometer

    Duretek, I., 29 Jun 2018, 9 p.

    Research output: Book/Report › Commissioned report › Research

  30. Published

    Viskositätsmessungen an einem PA6-Compound

    Duretek, I., 21 Jun 2018, 6 p.

    Research output: Book/Report › Commissioned report › Research

  31. Published

    Rheology and mechanical properties of fats: Second Edition

    Gonzalez-Gutierrez, J. & Scanlon, M. G., 14 Jun 2018, Structure-Function Analysis of Edible Fats: Second Edition. Marangoni, A. G. (ed.). 2 ed. United Kingdom, p. 119 - 168 50 p.

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research

  32. Published

    Bestimmung der thermodynamischen, rheologischen und mechanischen Stoffdaten für einen MIM-Feedstock

    Duretek, I., 13 Jun 2018, 20 p.

    Research output: Book/Report › Commissioned report › Research

  33. Published

    Anisotropic properties of oriented short carbon fibre filled polypropylene parts fabricated by extrusion-based additive manufacturing

    Spoerk, M., Savandaiah, C., Arbeiter, F., Traxler, G., Cardon, L., Holzer, C. & Sapkota, J., 11 Jun 2018, In: Composites Part A: Applied Science and Manufacturing. 113.2018, October, p. 95-104 10 p.

    Research output: Contribution to journal › Article › Research › peer-review

  34. Published

    Facile and Low-Cost Route for Sensitive Stretchable Sensors by Controlling Kinetic and Thermodynamic Conductive Network Regulating Strategies

    Duan, L., D'hooge, D. R., Spörk, M., Cornillie, P. & Cardon, L., 29 May 2018, In: ACS Applied Materials & Interfaces. 10.2018, 26, p. 22678-22691 14 p.

    Research output: Contribution to journal › Article › Research › peer-review

  35. Published

    Bestimmung der thermodynamischen und mechanischen Stoffdaten für ein PA6-Compound

    Duretek, I., 28 May 2018, 15 p.

    Research output: Book/Report › Commissioned report › Research

  36. Published

    Viskositätsmessungen an 8 Versuchsmustern aus Polypropylen

    Duretek, I., 25 May 2018, 8 p.

    Research output: Book/Report › Commissioned report › Research

  37. Published

    Adhesion of standard filament materials to different build platforms in material extrusion additive manufacturing

    Schuschnigg, S., Gonzalez-Gutierrez, J., Spörk, M., Sapkota, J. & Holzer, C., 21 May 2018, 34 th International Conference of the Polymer Processing society. Liu, S.-J. (ed.). Taipei, Taiwan, Vol. 34. 1 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  38. Published

    Additive Manufacturing of Metallic and Ceramic Components by the Material Extrusion of Highly-Filled Polymers: A Review and Future Perspectives

    Gonzalez-Gutierrez, J., Cano Cano, S., Schuschnigg, S., Kukla, C., Sapkota, J. & Holzer, C., 18 May 2018, In: Materials. 11, p. 2-36 36 p., 840.

    Research output: Contribution to journal › Literature review › peer-review

  39. Published

    Bestimmung der thermodynamischen, rheologischen und mechanischen Stoffdaten für PP LGF

    Duretek, I., 16 May 2018, 26 p.

    Research output: Book/Report › Commissioned report › Research

  40. Published

    Polypropylene Filled With Glass Spheres in Extrusion‐Based Additive Manufacturing: Effect of Filler Size and Printing Chamber Temperature

    Spörk, M., Arbeiter, F., Raguz, I., Weingrill, G., Fischinger, T., Traxler, G., Schuschnigg, S., Cardon, L. & Holzer, C., 16 May 2018, In: Macromolecular materials and engineering. 134, p. 1 15 p., 1800179.

    Research output: Contribution to journal › Article › Research › peer-review

  41. Published

    Material selection, testing and validation of additively manufactured components

    Wiener, J., Arbeiter, F., Spörk, M., Gosch, A. & Pinter, G. G., 9 May 2018.

    Research output: Contribution to conference › Paper › peer-review

  42. Published

    Optimisation of the Adhesion of Polypropylene-Based Materials during Extrusion-Based Additive Manufacturing

    Spörk, M., Gonzalez-Gutierrez, J., Lichal, C., Cajner, H., Berger, G., Schuschnigg, S., Cardon, L. & Holzer, C., 2 May 2018, In: Polymers / Molecular Diversity Preservation International. 10, 490, 16 p.

    Research output: Contribution to journal › Article › Research › peer-review

  43. Published

    Cranial polyetheretherketone implants by extrusion–based additive manufacturing: state of the art and prospects

    Katschnig, M. & Holzer, C., 1 May 2018, In: Material Science & Engineering International Journal. 2, 3

    Research output: Contribution to journal › Review article › peer-review

  44. Published

    Bestimmung der thermodynamischen und mechanischen Stoffdaten für ein PBT-Compound PBT GF 30

    Duretek, I., 27 Apr 2018, 16 p.

    Research output: Book/Report › Commissioned report › Research

  45. Published

    Herstellung eines thermoplastischen Blends und dessen rheologische und thermodynamische Analyse

    Duretek, I., 27 Apr 2018, 8 p.

    Research output: Book/Report › Commissioned report › Research

  46. Published

    Influence of filler treatment on the behavior of blast furnace slag filled polypropylene compounds

    Mostafa, A., Lucyshyn, T., Holzer, C., Flachberger, H., Öfner, W., Rieß, G. & Fritz, B., 23 Apr 2018, In: Journal of Applied Polymer Science. 135.2018, 31, p. 1-9 9 p., 46535.

    Research output: Contribution to journal › Article › Research › peer-review

  47. Published

    Strukturbauteile aus dem 3D-Drucker: begleitende Werkstoffprüfung zur Eigenschaftsoptimierung

    Arbeiter, F., Wiener, J., Spörk, M. & Pinter, G. G., 20 Apr 2018, p. 1. 4 p.

    Research output: Contribution to conference › Paper

  48. Published

    Additiv gefertigte Hybridbauteile mittels dualer Direktextrusion

    Katschnig, M., 19 Apr 2018, Schriftenreihe Kunststofftechnik Leoben: 27 Leobner Kunststoffkolloquium "Print and Coat". Kern, W. (ed.). Leoben, Vol. 8. p. 177 1 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  49. Published

    Entwicklungen im Bereich Fused Filament Fabrication

    Schuschnigg, S., Spörk, M. & Holzer, C., 19 Apr 2018, 27. Leobener Kunststoff-Kolloquium: Print & Coat- Polymere in Druck- und Beschichtungstechnologien. Kern, W. (ed.). Leoben: Eigenverlag, Vol. 27. p. 19-34

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  50. Published

    Feedstocks for the Shaping-Debinding-Sintering Process of Multi Material Components

    Cano Cano, S., Kukla, C., Kaylani, D., Schuschnigg, S., Holzer, C. & Gonzalez-Gutierrez, J., 19 Apr 2018, p. 1. 1 p.

    Research output: Contribution to conference › Poster › Research

  51. Published

    Feedstocks for the Shaping-Debinding-Sintering Process of Multi Material Components

    Cano Cano, S., Kukla, C., Kaylani, D., Schuschnigg, S., Holzer, C. & Gonzalez-Gutierrez, J., 19 Apr 2018, 27. Leobener Kunststoff-Kolloquium: Print & Coat- Polymere in Druck- und Beschichtungstechnologien. Kern, W. (ed.). Leoben, Vol. 27. p. 255 -256 2 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  52. Published

    Highly-filled Polymers for Fused Filament Fabrication

    Gonzalez-Gutierrez, J., Cano Cano, S., Schuschnigg, S., Holzer, C. & Kukla, C., 19 Apr 2018, 27. Leobener Kunststoff-Kolloquium: Print & Coat- Polymere in Druck- und Beschichtungstechnologien. Kern, W. (ed.). Leoben, Vol. 27. p. 93-102 10 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

Previous 1 2 3 4 5 6 7 8 ...16 Next
View graph of relations

Contact information

Otto Glöckel-Straße 2/III, 8700 Leoben
  • Main phone number: +43 3842 402 3501