Steel research international, ‎0177-4832

Journal

ISSNs0177-4832, 1611-3683, 1869-344X
1 - 89 out of 89Page size: 100

Publications / Theses

  1. 2022
  2. Published

    Suitability of Self-Reducing and Slag-Forming Briquettes for Electric Arc Furnace Use Based on Laboratory Tests

    Abdelrahim, A., Aula, M., Iljana, M., Willms, T., Echterhof, T., Steinlechner, S., Mombelli, D., Mapelli, C., Omran, M., Preiss, S. & Fabritius, T., Feb 2022, In: Steel research international. 93, 2

    Research output: Contribution to journal › Article › Research › peer-review

  3. 2021
  4. Published

    Investigation of calcium-aluminate-based mold flux of different compositions

    Marschall, I. & Harmuth, H., 10 Jun 2021, In: Steel research international.

    Research output: Contribution to journal › Article › Research › peer-review

  5. E-pub ahead of print

    Review on the Oxidation Behaviors and Kinetics of Magnetite in Particle Scale

    Zheng, H., Schenk, J., Spreitzer, D., Wolfinger, T. & Daghagheleh, O., 3 May 2021, (E-pub ahead of print) In: Steel research international.

    Research output: Contribution to journal › Review article › peer-review

  6. Published

    Bending behavior of zinc-coated hot stamping steels

    Hofer, C., Stadler, M., Kurz, T., Maier-Kiener, V., Mayerhofer, A., Hebesberger, T. & Schnitzer, R., 2021, In: Steel research international. 2021, p. 1-9

    Research output: Contribution to journal › Article › Research › peer-review

  7. Published

    Influence of microalloying elements and deformation parameters on the recrystallization and precipitation behavior of two low-alloyed steels

    Monschein, S., Kapp, M., Zügner, D., Fasching, J., Landefeld, A. & Schnitzer, R., 2021, In: Steel research international. 2021, 2100065, p. 1-9

    Research output: Contribution to journal › Article › Research › peer-review

  8. Published

    New Mold Slag Compositions for the Continuous Casting of Soft Steels

    Kölbl, N., 2021, In: Steel research international. p. 1-7 7 p.

    Research output: Contribution to journal › Special issue › Research › peer-review

  9. 2020
  10. Published

    K1-MET—A Success Story Since Almost 20 Years

    Rieger, J., Schenk, J., Buergler, T., Kofler, I., Schatzl, M. & Huemer, G., Dec 2020, In: Steel research international. 91.2020, 12, 4 p., 2000233.

    Research output: Contribution to journal › Article › Research › peer-review

  11. Published

    Special Issue:K1‐MET – Competence in Advanced Metallurgical and Environmental Process Development

    Schenk, J. (Guest editor) & Bürgler, T. (Guest editor), Dec 2020, In: Steel research international.

    Research output: Contribution to journal › Special issue › Research › peer-review

  12. Published

    Modeling of Ladle Refining Process Considering Mixing and Chemical Reaction

    You, D., Michelic, S. K. & Bernhard, C., 1 Nov 2020, In: Steel research international. 91.2020, 11, 9 p., 2000045.

    Research output: Contribution to journal › Article › Research › peer-review

  13. Published

    A Numerically Effcient Method for the Prediction of Nitrogen Oxide Emissions in Industrial Furnaces

    Spijker, C., Swaminathan, S. & Raupenstrauch, H., 16 Oct 2020, In: Steel research international. 91.2020, 12, 3 p., 2000239.

    Research output: Contribution to journal › Article › Research › peer-review

  14. Published

    Role of Solidification in Submerged Entry Nozzle Clogging During Continuous Casting of Steel

    Barati, H., Wu, M., Kharicha, A. & Ludwig, A., 16 Jul 2020, In: Steel research international. 91.2020, 12, 9 p., 2000230.

    Research output: Contribution to journal › Article › Research › peer-review

  15. Published

    Experimental Quantification of Critical Parameters for Prediction of Surface Crack Formation in Continuous Casting

    Krobath, R. & Bernhard, C., 7 Jul 2020, In: Steel research international. 91.2020, 10, 8 p., 2000234.

    Research output: Contribution to journal › Article › Research › peer-review

  16. Published

    Effect of Work‐Hardening Mechanisms in Asymmetrically Cyclic‐Loaded Austenitic Stainless Steels on Low‐Cycle and High‐Cycle Fatigue Behavior

    Moshtaghi, M. & Safyari, M., 27 Jun 2020, In: Steel research international.

    Research output: Contribution to journal › Article › Research › peer-review

  17. Published

    Determination of Martensite Start Temperature of High‐Speed Steels Based on Thermodynamic Calculations

    Platl, J., Leitner, H., Turk, C. & Schnitzer, R., 27 May 2020, In: Steel research international. 91.2020, 8, 8 p., 2000063.

    Research output: Contribution to journal › Article › Research › peer-review

  18. Published

    Physical Modeling Evaluation on Refining Effects of Ladle with Different Purging Plug Designs

    Tan, F., He, Z., Jin, S., Pan, L., Yawei, L. & Li, B., 25 Mar 2020, In: Steel research international. 91.2020, 6, 8 p., 1900606.

    Research output: Contribution to journal › Article › Research › peer-review

  19. 2019
  20. Published

    Thermomechanical fatigue testing of dual hardening tool steels

    Hofinger, M., Seisenbacher, B., Ognianov, M., Leitner, H., Turk, C., Kapp, M. & Schnitzer, R., 19 Nov 2019, In: Steel research international. p. 1-9

    Research output: Contribution to journal › Article › Research › peer-review

  21. Published

    Reduction of Iron Oxides with Hydrogen–A Review

    Spreitzer, D. & Schenk, J., 18 Aug 2019, In: Steel research international. 90.2019, 10, 17 p., 1900108.

    Research output: Contribution to journal › Article › Transfer › peer-review

  22. E-pub ahead of print

    Thermomechanical Analysis of Purging Plugs by Applying Fluid–Solid Conjugate Heat Transfer Modeling

    Tan, F., He, Z., Jin, S., Cai, H., Li, B., Li, Y. & Harmuth, H., 12 Jul 2019, (E-pub ahead of print) In: Steel research international. p. ? 9 p.

    Research output: Contribution to journal › Article › Research › peer-review

  23. Published

    Thermal and Thermomechanical Responses Prediction of a Steel Ladle Using a Back-Propagation Artificial Neural Network Combining Multiple Orthogonal Arrays

    Hou, A., Jin, S., Harmuth, H. & Gruber, D., 29 Apr 2019, In: Steel research international. 2019, 8 p., 1900116.

    Research output: Contribution to journal › Article › Research › peer-review

  24. Published

    Microstructural Analysis of the Recrystallization Behavior of Low Alloyed Steels

    Esterl, R., Sonnleitner, M. & Schnitzer, R., 1 Mar 2019, In: Steel research international. 90.2019, 3, 10 p., 1800500.

    Research output: Contribution to journal › Article › Research › peer-review

  25. Published

    A Review of Steel Scrap Melting in Molten Iron-Carbon Melts

    Penz, F. M. & Schenk, J., 1 Jan 2019, In: Steel research international. 2019, 20 p., 1900124.

    Research output: Contribution to journal › Review article › peer-review

  26. Published

    Study on the Influence of FeTi‐Addition on the Inclusion Population in Ti‐Stabilized ULC Steels and Its Consequences for SEN‐Clogging

    Dorrer, P., Michelic, S. K., Bernhard, C., Penz, A. & Rössler, R., 1 Jan 2019, In: Steel research international. 2019, 5, 13 p., 1800635.

    Research output: Contribution to journal › Article › Research › peer-review

  27. Published

    Influence of V and Nb Micro-Alloying on Direct Quenched and Tempered Ultra-High Strength Steels

    Esterl, R., Schnitzer, R., Sonnleitner, M. & Gschöpf, B., 2019, In: Steel research international. 90.2019, 9 p., 800640.

    Research output: Contribution to journal › Article › Research › peer-review

  28. 2018
  29. Published

    Analysis of the Alkali Flow in Ironmaking Reactors by a Thermochemical Approach: Blast Furnace

    Pichler, A., Hauzenberger, F., Schenk, J., Stocker, H. & Thaler, C., 1 Feb 2018, In: Steel research international. 89, 2, 1700303.

    Research output: Contribution to journal › Article › Research › peer-review

  30. Published

    Review on Modeling and Simulation of Electroslag Remelting

    Kharicha, A., Karimi-Sibaki, E., Wu, M., Ludwig, A. & Bohacek, J., 1 Jan 2018, In: Steel research international. 89, 1, 1700100.

    Research output: Contribution to journal › Review article › peer-review

  31. Published

    Simulation of As-Cast Steel Ingots

    Wu, M., Ludwig, A. & Kharicha, A., 1 Jan 2018, In: Steel research international. 89, 1, 1700037.

    Research output: Contribution to journal › Review article › peer-review

  32. 2017
  33. Published

    Chromium Stability in Steel Slags

    Cheremisina, E. & Schenk, J., Nov 2017, In: Steel research international. 88, 11

    Research output: Contribution to journal › Article › Research › peer-review

  34. Published

    The Effect of H2O on the Reactivity and Microstructure of Metallurgical Coke

    Wang, W., Bowen, D., Xu, R., Schenk, J., Wang, J. & Xu, Z., 24 May 2017, In: Steel research international. 88, 8, p. 1-9 9 p., 1700063.

    Research output: Contribution to journal › Article › Research › peer-review

  35. Published

    “A water experiment benchmark to evaluate numerical models for the motion of particles in continuous casting tundish”

    Vakhrushev, A., Wu, M., Ludwig, A., Tang, Y., Hackl, G. & Nitzl, G., 2017, In: Steel research international. 88, p. 1600276 (1-13)

    Research output: Contribution to journal › Article › Research › peer-review

  36. Published

    “Simulation of as-cast steel ingot”

    Wu, M., Ludwig, A. & Kharicha, A., 2017, In: Steel research international.

    Research output: Contribution to journal › Article › Research › peer-review

  37. Published

    Thermomechanical Treatment of Steels - A Real Disruptive Technology Since Decades

    Buchmayr, B., 2017, In: Steel research international. 88, 10, 14 p.

    Research output: Contribution to journal › Article › Research › peer-review

  38. Published

    Toward Modeling of Electrochemical Reactions during Electroslag Remelting (ESR) Process

    Karimi Sibaki, E., Kharicha, A., Wu, M., Ludwig, A. & Bohacek, J., 2017, In: Steel research international. 88.2017, 5, p. Cover 8 p., 1700011.

    Research output: Contribution to journal › Article › Research › peer-review

  39. Published

    “Towards modeling of electrochemical reactions during electroslag remelting (ESR) process”

    Karimi Sibaki, E., Kharicha, A., Wu, M., Bohacek, J. & Ludwig, A., 2017, In: Steel research international. 88, 5, p. 1700011 (1-8)

    Research output: Contribution to journal › Article › Research › peer-review

  40. 2016
  41. Published

    Microsegregation Model with Local Equilibrium Partition Coefficients During Solidification of Steels

    You, D., Bernhard, C., Wieser, G. & Michelic, S., Jul 2016, In: Steel research international. 87, 7, p. 840-849

    Research output: Contribution to journal › Article › Research › peer-review

  42. Published

    Reduction Behavior and Structural Evolution of Iron Ores in Fluidized Bed TechnologiesPart 2: Characterization and Evaluation of Worldwide Traded Fine Iron Ore Brands

    Pichler, A., Mali, H., Plaul, F., Schenk, J., Skorianz, M. & Weiss, B., May 2016, In: Steel research international. 87, 5, p. 642-652

    Research output: Contribution to journal › Article › Research › peer-review

  43. Published

    Study on Oxide Inclusion Dissolution in Secondary Steelmaking Slags using High Temperature Confocal Scanning Laser Microscopy

    Michelic, S., Goriupp, J., Feichtinger, S., Kang, Y.-B., Bernhard, C. & Schenk, J., Jan 2016, In: Steel research international. 87, 1, p. 57-67

    Research output: Contribution to journal › Article › Research › peer-review

  44. 2015
  45. Published

    Reduction Behavior and Structural Evolution of Iron Ores in Fluidized Bed Technologies. Part 1: Method for the Determination

    Skorianz, M., Mali, H., Pichler, A., Plaul, F., Schenk, J. & Weiss, B., 28 Sept 2015, In: Steel research international. 87, 5, p. 633-641 9 p.

    Research output: Contribution to journal › Article › Research › peer-review

  46. Published

    Toward CFD Modeling of Slag Entertainment in Gas Stirred Ladles

    Huang, A., Harmuth, H., Doletschek, M., Vollmann, S. & Feng, X., 2015, In: Steel research international. 86, 12, p. 1447-1454 8 p.

    Research output: Contribution to journal › Article › Research › peer-review

  47. 2014
  48. Published

    Numerical Study about the Influence of Small Casting Speed Variations on the Metallurgical Length in Continuous Casting of Steel Slabs

    Domitner, J., Wu, M. & Ludwig, A., 3 Jul 2014, In: Steel research international. 86, p. 184-188

    Research output: Contribution to journal › Article › Research › peer-review

  49. Published

    Editorial

    Kepplinger, W. & Schenk, J., 1 Apr 2014, In: Steel research international. 85, 4, 1 p.

    Research output: Contribution to journal › Editorial › peer-review

  50. Published

    Thermomechanical behavior of steel ladle linings and the influence of insulations

    Gruber, D. & Harmuth, H., 1 Apr 2014, In: Steel research international. 85, 4, p. 512-518 7 p.

    Research output: Contribution to journal › Article › Research › peer-review

  51. Published

    In-situ quantification of micro-segregation that occurs during the solidification of steel

    Griesser, S., Reid, M., Pierer, R., Bernhard, C. & Dippenaar, R., 1 Jan 2014, In: Steel research international. 85, 8, p. 1257-1265 9 p.

    Research output: Contribution to journal › Article › Research › peer-review

  52. Published

    Kinetics of the Austenite-to-Ferrite Phase Transformation - Simulations and Experiments

    Gamsjäger, E., Werner, R., Schiller, W. & Buchmayr, B., 2014, In: Steel research international. p. 131-142

    Research output: Contribution to journal › Article › Research › peer-review

  53. Published

    Precipitation behavior of strain-induced V preicipitates in ferrite at different temperatures in a 0.2wt% carbon steel

    Nöhrer, M., Mayer, W., Zamberger, S., Kozeschnik, E. & Leitner, H., 2014, In: Steel research international. 85, p. 679-688

    Research output: Contribution to journal › Article › Research › peer-review

  54. Published

    Thermochemical Calculation of the Quaternary CaO–SiO2–Al2O3–MgO System at 1600°C for Predicting the MgO-Saturation and MgO–MgO · Al2O3 Equilibrium of Secondary Metallurgical Slag

    Goriupp, J., Schenk, J., Klösch, G. & Hiebler, M., 2014, In: Steel research international. 85, p. 564-569

    Research output: Contribution to journal › Article › Research › peer-review

  55. Published

    Thermochemical wear of refractory linings associated to gas firing in metallurgical plants

    Rieger, J., Drozd-Rys, M., Weiß, C. & Harmuth, H., 2014, In: Steel research international. 85, p. 527-536

    Research output: Contribution to journal › Article › Research › peer-review

  56. Published

    Thermodynamic and Kinetic Model of the Converter Steelmaking Process. Part 1: The Description of the BOF Model

    Lytvynyuk, Y., Schenk, J., Hiebler, M. & Sormann, A., 2014, In: Steel research international. 85, p. 537-543

    Research output: Contribution to journal › Article › Research › peer-review

  57. Published

    Thermodynamic and Kinetic Model of the Converter Steelmaking Process. Part 2: The Model Validation

    Lytvynyuk, Y., Schenk, J., Hiebler, M. & Sormann, A., 2014, In: Steel research international. 85, p. 544-563

    Research output: Contribution to journal › Article › Research › peer-review

  58. Published

    Thermomechanical Behaviour of Steel Ladle Linings and the Influence of Insulations

    Gruber, D. & Harmuth, H., 2014, In: Steel research international. 85, p. 512-518

    Research output: Contribution to journal › Article › Research › peer-review

  59. 2012
  60. Published

    Integration of the blast furnace route and the FINEX ®- process for low CO 2 hot metal production

    Thaler, C., Tappeiner, T., Schenk, J. L., Kepplinger, W. L., Plaul, J. F. & Schuster, S., 1 Feb 2012, In: Steel research international. 83, 2, p. 181-188 8 p.

    Research output: Contribution to journal › Article › Research › peer-review

  61. Published

    Integration of the Blast Furnace Route and the FINEX-Process for Low CO2 Hot Metal Production

    Thaler, C., Tappeiner, T., Schenk, J., Kepplinger, W., Plaul, J. F. & Schuster, S., 2012, In: Steel research international. 83, p. 1-8

    Research output: Contribution to journal › Article › Research › peer-review

  62. 2011
  63. Published

    A Study about the Influence of Carbon Content in the Steel on the Casting Behavior

    Xia, G., Bernhard, C., Ilie, S. & Fürst, C., 2011, In: Steel research international. 82, p. 230-236

    Research output: Contribution to journal › Article › Research › peer-review

  64. Published

    Physical simulation of the hot direct rolling of steel

    Gelder, S., Buchmayr, B., Linzer, B. & Hohenbichler, G., 2011, In: Steel research international. p. 1213-1219

    Research output: Contribution to journal › Article › Research › peer-review

  65. 2010
  66. Published

    Simulation and modelling of metallurgical processes in steelmaking

    Ludwig, A., 1 Aug 2010, In: Steel research international. 81, 8, 1 p.

    Research output: Contribution to journal › Editorial › peer-review

  67. Published

    Experimental and morphological investigations of the reduction from coarse hematite to magnetite and wustite under fluidized bed conditions

    Weiss, B., Sturn, J., Voglsam, S., Strobl, S., Mali, H., Winter, F. & Schenk, J., 1 Feb 2010, In: Steel research international. 81, 2, p. 93-99 7 p.

    Research output: Contribution to journal › Article › Research › peer-review

  68. Published

    Kinetics of Precipitation in a Complex Hot-Work Tool Steel

    Sonderegger, B., Kozeschnik, E., Leitner, H., Clemens, H., Svoboda, J., Fischer, F. D. & Staron, P., 2010, In: Steel research international. 81, p. 64-73

    Research output: Contribution to journal › Article › Research › peer-review

  69. Published

    Modelling the Forming Limit during Cross-Rolling of Seamless Pipes Using a Modified Continuum Damage Mechanics Approach

    Pschera, R., Sommitsch, C. & Klarner, J., 2010, In: Steel research international.

    Research output: Contribution to journal › Article › Research › peer-review

  70. Published

    Modelling Transformation Induced Plasticity – An Application to Heavy Steel Plates

    Antretter, T., Zhang, D. & Parteder, E., 2010, In: Steel research international. 81, p. 675-680

    Research output: Contribution to journal › Article › Research › peer-review

  71. Published

    On the Formation of Centreline Segregation in Continuous Slab Casting of Steel due to Bulging and/or Feeding

    Mayer, F., Wu, M. & Ludwig, A., 2010, In: Steel research international. 81, p. 660-667

    Research output: Contribution to journal › Article › Research › peer-review

  72. Published

    Reconstruction of Three-Dimensional Dendritic Structures Based on the Investigation of Microsegregation Patterns

    Domitner, J., Kharicha, A., Grasser, M. & Ludwig, A., 2010, In: Steel research international. 81, p. 644-651

    Research output: Contribution to journal › Article › Research › peer-review

  73. Published

    Short-term Creep Behavior of an X 37 Cr Mo V 5-1 Hot-work Tool Steel with almost Bainitic and fully Martensitic Microstructures

    Wurmbauer, H., Leitner, H., Panzenböck, M., Scheu, C. & Clemens, H., 2010, In: Steel research international. p. 569-575

    Research output: Contribution to journal › Article › Research › peer-review

  74. 2009
  75. Published

    Obituary for Prof. Wilfried Krieger

    Schenk, J., Dec 2009, In: Steel research international. 80, 12, p. 866-866

    Research output: Contribution to journal › Article › Research › peer-review

  76. Published

    Changes in Tempering and its Effect on Precipitation Behaviour in a Hot-work Tool Steel

    Mayer, S., Leitner, H., Scheu, C., Siller, I. & Clemens, H., 2009, In: Steel research international. 80, p. 89-95

    Research output: Contribution to journal › Article › Research › peer-review

  77. Published

    Characterization of Reverted Austenite during Prolonged Ageing of Maraging Steel Corrax

    Höring, S., Abou-Ras, D., Wanderka, N., Leitner, H., Clemens, H. & Banhart, J., 2009, In: Steel research international. 80, p. 84-88

    Research output: Contribution to journal › Article › Research › peer-review

  78. Published

    Investigation of Decarbuization in Spring Steel Production Process-Part I: Experiments

    Dejun, L., Anghelina, D., Burzic, D., Zamberger, J., Kienreich, R., Schifferl, H., Krieger, W. & Kozeschnik, E., 2009, In: Steel research international. 4, p. 298-303

    Research output: Contribution to journal › Article › Research › peer-review

  79. Published

    Investigation of Decarburization in Spring Steel Production Process - Part I: Experiments

    Dejun, L., Anghelina, D., Burzic, D., Zamberger, J., Kienreich, R., Schifferl, H., Krieger, W. & Kozeschnik, E., 2009, In: Steel research international. 80, p. 298-303

    Research output: Contribution to journal › Article › Research › peer-review

  80. Published

    Investigation of Decarburization in Spring Steel Production Process - Part II: Simulation

    Dejun, L., Burzic, D., Anghelina, D., Krieger, W. & Kozeschnik, E., 2009, In: Steel research international. 80, p. 304-310

    Research output: Contribution to journal › Article › Research › peer-review

  81. 2008
  82. Published

    CFD Simulation of the Carbon Dust Combustionin the COREX Melter Gasifier

    Berger, K., Weiß, C. & Kepplinger, W., 2008, In: Steel research international. Vol. 79, p. 579-585

    Research output: Contribution to journal › Article › Research › peer-review

  83. Published

    Durability of Brick Lined Steel Ladles from a Mechanical point of View

    Gruber, D. & Harmuth, H., 2008, In: Steel research international. p. 913-917

    Research output: Contribution to journal › Article › Research › peer-review

  84. Published

    On the Formation of Macrosegregations in Steel Ingot Castings

    Wu, M., Könözsy, L., Ludwig, A., Schützenhöfer, W. & Tanzer, R., 2008, In: Steel research international. 79, p. 637-644

    Research output: Contribution to journal › Article › Research › peer-review

  85. Published

    On the Importance of Electric Currents Flowing directly into the Mould during an ESR Process

    Kharicha, A., Schützenhöfer, W., Ludwig, A., Tanzer, R. & Wu, M., 2008, In: Steel research international. 79, p. 632-636

    Research output: Contribution to journal › Article › Research › peer-review

  86. Published

    Solidification and Particle Entrapment during Continuous Casting of Steel

    Pfeiler, C., Thomas, B. G., Wu, M., Ludwig, A. & Kharicha, A., 2008, In: Steel research international. 79, p. 599-607

    Research output: Contribution to journal › Article › Research › peer-review

  87. 2007
  88. Published

    Coupled Physical and Numerical Simulation to Optimize Thermo-mechanical Metal Forming Processes

    Sommitsch, C. & Buchmayr, B., 2007, In: Steel research international. 78, p. 740-744

    Research output: Contribution to journal › Article › Research › peer-review

  89. Published

    Hot Toughness of Continuously Cast Steel Slabs during Reheating

    Yang, B., Degischer, H. P., Xia, G. & Presslinger, H., 2007, In: Steel research international. 78, p. 482-491

    Research output: Contribution to journal › Article › Research › peer-review

  90. Published

    Plasma Reduction of Iron Oxide by Methane Gas and its Process Up-scaling

    Badr, K., Bäck, E. & Krieger, W., 2007, In: Steel research international. 78, p. 275-280

    Research output: Contribution to journal › Article › Research › peer-review

  91. Published

    Results of Research into the Segregation Behaviour of Manganese, Silicon and Chromium in Continuous Casting

    Ilie, S., Presslinger, H., Reisinger, P., Mayr, M. & Etzelsdorfer, K., 2007, In: Steel research international. 78, p. 327-332

    Research output: Contribution to journal › Article › Research › peer-review

  92. 2006
  93. Published

    Assessment of the Primary Structure of Slabs and the Influence on Hot- and Cold-Rolled Strip Structure

    Presslinger, H., Mayr, M., Tragl, E. & Bernhard, C., 2006, In: Steel research international. 77, p. 107-115

    Research output: Contribution to journal › Article › Research › peer-review

  94. Published

    Numerical Study on Mould Powder Entrapment Caused by Vortexing in a Continuous Casting Process

    Kastner, G., Brandstätter, W., Kaufmann, B., Wassermayr, C. & Javurek, M., 2006, In: Steel research international. 77, p. 404-408

    Research output: Contribution to journal › Article › Research › peer-review

  95. Published

    On the Algorithmic Implementation of a Material Model Accounting for the Effects of Martensitic Transformation

    Antretter, T., Fischer, F. D., Cailletaud, G. & Ortner, B., 2006, In: Steel research international. 77, p. 733-740

    Research output: Contribution to journal › Article › Research › peer-review

  96. 2005
  97. Published

    A Study on the Buckling Behavior of Strips and Plates with Residual Stresses

    Fischer, F. D., Friedl, N., Noe, A. & Rammerstorfer, F. G., 2005, In: Steel research international. 76, p. 327-335

    Research output: Contribution to journal › Article › Research › peer-review

  98. Published

    Non-Metallic Inclusions in High-Manganese-Alloy Steels

    Gigacher, G., Krieger, W., Pjotr, S. & Thomser, C., 2005, In: Steel research international. 76, p. 644-649

    Research output: Contribution to journal › Article › Research › peer-review

  99. Published

    Norican Steel - An Assessment of the Archaeological Finds at the Magdalensberg Site, Carinthia, Compared to the "Celtic Trove" of Gründberg Hill, Linz

    Presslinger, H., 2005, In: Steel research international. 76, p. 666-671

    Research output: Contribution to journal › Article › Research › peer-review

  100. Published

    On Restricting Aspects in the Production of Nonmagnetic Cr-Mn-N-Alloyed Steels

    Saller, G., Bernauer, J., Leitner, H. & Clemens, H., 2005, In: Steel research international. 76, p. 769-774

    Research output: Contribution to journal › Article › Research › peer-review

  101. Published

    Reduction of Fine Ores in Argon-Hydrogen Plasma

    Plaul, J., Krieger, W. & Bäck, E., 2005, In: Steel research international. 76, p. 548-554

    Research output: Contribution to journal › Article › Research › peer-review

  102. 2004
  103. Published

    Optimisation of the lining design of a BOF converter by finite element simulations

    Gruber, D., Harmuth, H. & Andreev, K., 2004, In: Steel research international. 75, p. 451-457

    Research output: Contribution to journal › Article › Research › peer-review

  104. 2002
  105. Published

    Theory, experiments and numerical modelling of phase transformations with emphasis on TRIP

    Antretter, T., Fischer, F. D., Tanaka, K. & Cailletaud, G., 1 Jun 2002, In: Steel research international. 73, 6-7, p. 225-235 11 p.

    Research output: Contribution to journal › Article › Research › peer-review

  106. 1999
  107. Published

    Mechanical properties and crack susceptibility of steel during solidification

    Hiebler, H. & Bernhard, C., 1 Jan 1999, In: Steel Research. 70.1999, 8-9, p. 349-355 7 p.

    Research output: Contribution to journal › Article › Research › peer-review

  108. 1992
  109. Published

    High-Speed Temperature Measurements During Rapid Solidification of Iron-Silicon Ribbons Produced by Planar Flow Casting

    Ludwig, A. & Frommeyer, G., 1992, In: Steel research international. p. 399-403

    Research output: Contribution to journal › Article › Research › peer-review

  110. 1990
  111. Published

    Modeling of Crystal Growth During the Ribbon Formation in Planar Flow Casting

    Ludwig, A. & Frommeyer, G., 1990, In: Steel research international. p. 467-70

    Research output: Contribution to journal › Article › Research › peer-review

View graph of relations