Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science, ‎1073-5623

Journal

ISSNs1073-5623
1 - 61 out of 61Page size: 100

Publications / Theses

  1. 2021
  2. Accepted/In press

    Directional Solidification of AlSi7Fe1 Alloy Under Forced Flow Conditions: Effect of Intermetallic Phase Precipitation and Dendrite Coarsening

    Zhang, H., Wu, M., Rodrigues, C. M. G., Ludwig, A. & Kharicha, A., 2021, (Accepted/In press) In: Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science.

    Research output: Contribution to journal › Article › Research › peer-review

  3. 2020
  4. Published

    Deformation-Mode-Sensitive Behavior of CuZr-Based Bulk Metallic Glasses Under Dynamic Loading

    Rezvan, A., Sarac, B., Soprunyuk, V., Spieckermann, F., Gammer, C., Sheng, H., Sifferlinger, N. A. & Eckert, J., 11 Nov 2020, In: Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science. 52.2021, 1, p. 8-13 6 p.

    Research output: Contribution to journal › Article › Research › peer-review

  5. Published

    Experimental Study of High Temperature Phase Equilibria in the Iron-Rich Part of the Fe-P and Fe-C-P Systems

    Bernhard, M. C., Presoly, P., Fuchs, N., Bernhard, C. & Kang, Y.-B., 23 Jul 2020, In: Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science. 51.2020, 10, p. 5351-5364 14 p.

    Research output: Contribution to journal › Article › Research › peer-review

  6. Published

    Experimental and Numerical Investigation of the Deformation and Fracture Mode of Microcantilever Beams Made of Cr(Re)/Al2O3 Metal-Matrix Composite

    Weglewski, W., Pitchai, P., Bochenek, K., Bolzon, G., Konetschnik, R., Sartory, B., Ebner, R., Kiener, D. & Basista, M., May 2020, In: Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science. 51.2020, May, p. 2377-2390 14 p.

    Research output: Contribution to journal › Article › Research › peer-review

  7. 2019
  8. Published

    Evolution of Bimodal Microstructure and High-Temperature Wear Resistance of Al-Cu-Ni Alloys

    Maity, S., Chanda, D. K., Ramasamy, P., Show, B. K., Eckert, J. & Bera, S., 1 Nov 2019, In: Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science. 51.2020, 1, p. 109-115 7 p.

    Research output: Contribution to journal › Article › Research › peer-review

  9. E-pub ahead of print

    Effect of Heterophase Interfaces on Microstructure and Crystallographic Texture Evolution during Rolling of Directionally Solidified Ag-Cu Eutectic Alloy

    LI, J., Li, J., Renk, O., Pippan, R. & Ghosh, P., 31 Oct 2019, (E-pub ahead of print) In: Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science. 51.2020, 1, p. 368-379 12 p.

    Research output: Contribution to journal › Article › Research › peer-review

  10. Published

    Influences of Thermomechanical Treatment and Nb Micro-alloying on the Hardenability of Ultra-High Strength Steels

    Esterl, R., Sonnleitner, M. & Schnitzer, R., 29 Apr 2019, In: Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science. 50.2019, 7, p. 3238 - 3245 8 p.

    Research output: Contribution to journal › Article › Research › peer-review

  11. Published

    An Experimental Benchmark of Non-metallic Inclusion Distribution Inside a Heavy Continuous-Casting Slab

    Liu, Z., Li, B., Wu, M., Xu, G., Ruan, X. & Ludwig, A., 2 Jan 2019, In: Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science. 50.2019, 3, p. 1370-1379 10 p.

    Research output: Contribution to journal › Article › Research › peer-review

  12. 2018
  13. E-pub ahead of print

    Strengthening Effects in Nano-/Ultrafine-Grained Carbon Nanotube Reinforced-Titanium Composites Investigated by Finite Element Modeling

    Li, F., Hao, P., Yi, J., Prashanth, K. G., Maity, T. & Eckert, J., 23 Dec 2018, (E-pub ahead of print) In: Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science. 49.2018, 12, p. 6469-6478 10 p.

    Research output: Contribution to journal › Article › Research › peer-review

  14. Published

    Sample Size and Strain-Rate-Sensitivity Effects on the Homogeneity of High-Pressure Torsion Deformed Disks

    Hohenwarter, A. & Pippan, R., 21 Nov 2018, In: Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science. 50.2019, 2, p. 601-608 8 p.

    Research output: Contribution to journal › Article › Research › peer-review

  15. Published

    On the Coupling Mechanism of Equiaxed Crystal Generation with the Liquid Flow Driven by Natural Convection During Solidification

    Stefan-Kharicha, M., Kharicha, A., Wu, M. & Ludwig, A., 1 May 2018, In: Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science. 49, 5, p. 1708-1724 17 p.

    Research output: Contribution to journal › Article › Research › peer-review

  16. 2017
  17. Published

    Optimization of the Hot Forging Processing Parameters for Powder Metallurgy Fe-Cu-C Connecting Rods Based on Finite Element Simulation

    Li, F., Yi, J. & Eckert, J., Dec 2017, In: Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science. 48A, 12, p. 6027-6037

    Research output: Contribution to journal › Article › Research › peer-review

  18. Published

    Deformation Behavior of Powder Metallurgy Connecting Rod Preform During Hot Forging Based on Hot Compression and Finite Element Method Simulation

    Li, F., Yi, J. & Eckert, J., Jun 2017, In: Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science. 48A, p. 2971-2978

    Research output: Contribution to journal › Article › Research › peer-review

  19. Published

    Massive formation of equiaxed crystals by avalanches of mushy zone segments

    Ludwig, A., Stefan-Kharicha, M., Kharicha, A. & Wu, M., 2017, In: Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science. 48, 6, p. 2927-2931 5 p.

    Research output: Contribution to journal › Article › Research › peer-review

  20. 2016
  21. Published

    Induction Tempering vs Conventional Tempering of a Heat-Treatable Steel

    Sackl, S. C., Zuber, C., Clemens, H. & Primig, S., 2016, In: Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science. 47, p. 3694-3703 9 p.

    Research output: Contribution to journal › Article › Research › peer-review

  22. 2015
  23. Published

    On Macrosegregation

    Ludwig, A., Wu, M. & Kharicha, A., 1 Nov 2015, In: Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science. 46, 11, p. 4854-4867 14 p.

    Research output: Contribution to journal › Article › Research › peer-review

  24. Published

    Nucleation and Growth of Eutectic Si in Al-Si Alloys with Na Addition

    Li, J., BARRIRERO, J., ENGSTLER, M., ABOULFADL, H., MüCKLICH, F. & Schumacher, P., 2015, In: Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science.

    Research output: Contribution to journal › Article › Research › peer-review

  25. 2014
  26. Published

    Statistical quantification of the impact of surface preparation on yield point phenomena in nickel

    Lawrence, S. K., Zbib, H. M., Cordill, M. J., Wurster, S. & Bahr, D. F., 1 Jan 2014, In: Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science. 45, 10, p. 4307-4315 9 p.

    Research output: Contribution to journal › Article › Research › peer-review

  27. Published

    Induction hardening vs conventional hardening of a heat treatable steel

    Sackl, S. C., Leitner, H., Zuber, M., Clemens, H. & Primig, S., 2014, In: Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science. 45A, p. 5657-5666

    Research output: Contribution to journal › Article › Research › peer-review

  28. Published

    Influence of deformation on the precipitation behavior of Nb (CN) in austenite and ferrite

    Nöhrer, M., Mayer, W., Primig, S., Zamberger, S., Kozeschnik, E. & Leitner, H., 2014, In: Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science. 45 A, p. 4210-4219

    Research output: Contribution to journal › Article › Research › peer-review

  29. Published

    Refinement of eutectic Si in high purity Al-5Si alloys with combined Ca and P additions

    Ludwig, T., Li, J., Schaffer, P., Schumacher, P. & Arnberg, L., 2014, In: Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science. 46, p. 362-376

    Research output: Contribution to journal › Article › Research › peer-review

  30. Published

    Secondary Al-Si-Mg High-pressure Die Casting Alloys with Enhanced Ductility

    Bösch, D., Pogatscher, S., Hummel, M., Fragner, W., Uggowitzer, P. J., Göken, M. & Höppel, H. W., 2014, In: Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science. 3, p. 1035-1045

    Research output: Contribution to journal › Article › Research › peer-review

  31. Published

    The effect of Zr incorporation caused by ball abrasion in a milled Fe-Y2O3 model alloy

    Ressel, G., Primig, S. & Leitner, H., 2014, In: Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science. 45, p. 1552-1558

    Research output: Contribution to journal › Article › Research › peer-review

  32. Published

    Thermodynamic Modeling of the Cr-Fe-S System

    Waldner, P., 2014, In: Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science. 45, p. 798-814

    Research output: Contribution to journal › Article › Research › peer-review

  33. 2013
  34. Published

    Prediction of the as-cast structure of Al-4.0 Wt Pct Cu ingots

    Ahmadein, M., Wu, M., Li, J. H., Schumacher, P. & Ludwig, A., 1 Jun 2013, In: Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science. 44, 6, p. 2895-2903 9 p.

    Research output: Contribution to journal › Article › Research › peer-review

  35. Published

    Application of microprobe analysis to the reconstruction and characterization of dendritic structures

    Domitner, J., Kharicha, A., Wu, M. & Ludwig, A., 2013, In: Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science. 44, p. 607-616

    Research output: Contribution to journal › Article › Research › peer-review

  36. Published

    Identification of Defect Prone Peritectic Steel Grades by Analyzing High-Temperature Phase Transformations

    Presoly, P., Bernhard, C. & Pierer, R., 2013, In: Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science. 44, p. 5377-5388

    Research output: Contribution to journal › Article › Research › peer-review

  37. Published

    Modeling the effect of strand surface bulging and mechanical softreduction on the macrosegregation formation in steel continuous casting

    Domitner, J., Wu, M., Kharicha, A., Ludwig, A., Kaufmann, B., Reiter, J. & Schaden, T., 2013, In: Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science.

    Research output: Contribution to journal › Article › Research › peer-review

  38. Published

    Refinement of Eutectic Si Phase in Al-5Si Alloys with Yb Additions

    Li, J., SUETSUGU, S., TSUNEKAWA, Y. & Schumacher, P., 2013, In: Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science. 44, p. 669-681

    Research output: Contribution to journal › Article › Research › peer-review

  39. Published

    “Simultaneous observation of melt flow and motion of equiaxed crystals during solidification using a dual phase Particle Image Velocimetry technique. Part I

    Kharicha, A., Stefan Kharicha, M., Ludwig, A. & Wu, M., 2013, In: Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science. 44, p. 650-660

    Research output: Contribution to journal › Article › Research › peer-review

  40. Published

    “Simultaneous observation of melt flow and motion of equiaxed crystals during solidification using a dual phase Particle Image Velocimetry technique. Part II

    Kharicha, A., Stefan Kharicha, M., Ludwig, A. & Wu, M., 2013, In: Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science. 44, p. 661-668

    Research output: Contribution to journal › Article › Research › peer-review

  41. 2012
  42. Published

    Retained austenite decomposition and carbide formation during tempering a hot-work tool steel X38CrMoV5-1 studied by dilatometry and atom probe tomography

    Lerchbacher, C., Zinner, S. & Leitner, H., 2012, In: Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science. 43, p. 4989-4998

    Research output: Contribution to journal › Article › Research › peer-review

  43. Published

    Static recrystallization of molybdenum after deformation below 0.5TM(K)

    Primig, S., Leitner, H., Knabl, W., Lorich, A. & Stickler, R., 2012, In: Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science. 43, p. 4806-4818

    Research output: Contribution to journal › Article › Research › peer-review

  44. Published

    Textural evolution during dynamic recovery and static recrystallization of molybdenum

    Primig, S., Leitner, H., Knabl, W., Lorich, A., Clemens, H. & Stickler, R., 2012, In: Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science. 43, p. 4794-4805

    Research output: Contribution to journal › Article › Research › peer-review

  45. Published

    Using a two-phase columnar solidification model to study the principle of mechanical softreduction in slab casting

    Wu, M., Domitner, J. & Ludwig, A., 2012, In: Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science. 43, p. 945-964

    Research output: Contribution to journal › Article › Research › peer-review

  46. 2011
  47. Published

    ALEMI: A Ten-Year History of Discussions of Alloying-Element Interactions with Migrating Interfaces

    Purdy, G., Agren, J., Borgenstam, A., Bréchet, Y., Enomoto, M., Furuhara, T., Gamsjäger, E., Gouné, M., Hillert, M., Hutchinson, C., Militzer, M. & Zurob, H., 2011, In: Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science. 42A, p. 3703-3718

    Research output: Contribution to journal › Article › Research › peer-review

  48. Published

    Effect of Large Shear Deformations on the Fracture Behavior of a Fully Pearlitic Steel

    Hohenwarter, A., Taylor, A., Stock, R. & Pippan, R., 2011, In: Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science. 42, p. 1609-1618

    Research output: Contribution to journal › Article › Research › peer-review

  49. Published

    Study of Heterogeneous Nucleation of Eutectic Si in High-Purity Al-Si Alloys with Sr Addition

    Zarif, M. Z., McKay, B. & Schumacher, P., 2011, In: Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science. 42A, p. 1684-1691

    Research output: Contribution to journal › Article › Research › peer-review

  50. 2010
  51. Published

    Microstructures and Properties of Carbon Refractories for Blast Furnaces with SiO2 and Al Additions

    Li, Y., Chen, X., Sang, S., Li, Y., Jin, S., Zhao, L. & Ge, S., Aug 2010, In: Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science. 41A, 8, p. 2085-2092

    Research output: Contribution to journal › Article › Research › peer-review

  52. Published

    Effect of Equal Channel Angular Pressing on the Fracture Behavior of Commercially Pure Titanium

    Pippan, R., Sabirov, I., Valiev, R. Z. & Semenova, I. P., 2010, In: Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science. p. 727-733

    Research output: Contribution to journal › Article › Research › peer-review

  53. Published

    Fracture and Delamination of Chromium Thin Films on Polymer Substrates

    Cordill, M., Taylor, A., Schalko, J. & Dehm, G., 2010, In: Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science. p. 870-875

    Research output: Contribution to journal › Article › Research › peer-review

  54. Published

    Precipitation Behavior of Fe-25 At. Pct Co-9 At. Pct Mo Investigated by In-Situ small-Angle Neutron Scattering and Coplementary Methods

    Eidenberger, E., Schober, M., Stergar, E., Leitner, H., Staron, P. & Clemens, H., 2010, In: Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science. p. 1230-1234

    Research output: Contribution to journal › Article › Research › peer-review

  55. Published

    Rate Independent and Rate Dependent Structural Evolution during Severe Plastic Deformation

    Pippan, R., Bachmaier, A. & Hafok, M., 2010, In: Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science. p. 8-13

    Research output: Contribution to journal › Article › Research › peer-review

  56. 2009
  57. Published

    Effect of Temperature on the Properties and Microstructures of Carbon Refractories for Blast Furnace

    Chen, X., Li, Y., Li, Y., Jin, S., Zhao, L. & Ge, S., Jul 2009, In: Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science. 40A, 7, p. 1675-1683

    Research output: Contribution to journal › Article › Research › peer-review

  58. Published

    Failure Mechanisms in a Fatigue-Loaded High-Performance Powder Metallurgical Tool Steel

    Jesner, G. & Pippan, R., 2009, In: Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science. 40A, p. 810-817

    Research output: Contribution to journal › Article › Research › peer-review

  59. Published

    Fracture and Delamination of Chromium Thin Films on Polymer Substrates

    Cordill, M., Taylor, A., Schalko, J. & Dehm, G., 2009, In: Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science. p. 1-6

    Research output: Contribution to journal › Article › Research › peer-review

  60. Published

    Hardening and Softening Behavior by Cyclic High-Pressure Torsion

    Wetscher, F. & Pippan, R., 2009, In: Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science. p. 1-6

    Research output: Contribution to journal › Article › Research › peer-review

  61. 2007
  62. Published

    Determination of the solid-liquid interface energy in the Al-Cu-Ag system

    Bulla, A., Carreno-Bodensiek, C., Pustal, B., Berger, R., Bührig-Polaczek, A. & Ludwig, A., 1 Sept 2007, In: Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science. 38 A, 9, p. 1956-1964 9 p.

    Research output: Contribution to journal › Article › Research › peer-review

  63. Published

    Using a three-phase deterministic model for the columnar-to-equiaxed transition

    Wu, M. & Ludwig, A., 1 Jul 2007, In: Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science. 38 A, 7, p. 1465-1475 11 p.

    Research output: Contribution to journal › Article › Research › peer-review

  64. Published

    Using a Three-Phase Deterministic Model for the Columnar-to-Equiaxed Transition (CET)

    Wu, M. & Ludwig, A., 2007, In: Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science. 38, p. 1465-1475

    Research output: Contribution to journal › Article › Research › peer-review

  65. 2006
  66. Published

    A three-phase model for mixed columnar-equiaxed solidification

    Wu, M. & Ludwig, A., 1 May 2006, In: Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science. 37.2006, 5, p. 1613-1631 19 p.

    Research output: Contribution to journal › Article › Research › peer-review

  67. Published

    A 3-Phase Model for Mixed Columnar-Equiaxed Solidification

    Wu, M. & Ludwig, A., 2006, In: Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science. 37A, p. 1613-1631

    Research output: Contribution to journal › Article › Research › peer-review

  68. Published

    High-Speed Quenching Dilatometer Investigation of the Austenite to Ferrite Transformation in Fe-C

    Kozeschnik, E. & Gamsjäger, E., 2006, In: Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science. 37A, p. 1791-1797

    Research output: Contribution to journal › Article › Research › peer-review

  69. Published

    Modelling of Massive Transformation in Substitutional Alloys

    Svoboda, J., Gamsjäger, E. & Fischer, F. D., 2006, In: Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science. 37A, p. 125-132

    Research output: Contribution to journal › Article › Research › peer-review

  70. Published

    TEM Investigations of the Structural Evolution in a Pearlitic Steel Deformed by High-Pressure Torsion

    Wetscher, F., Pippan, R., Sturm, S., Kauffmann, F., Scheu, C. & Dehm, G., 2006, In: Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science. 37, p. 1963-1968

    Research output: Contribution to journal › Article › Research › peer-review

  71. 2005
  72. Published

    Homogenization of Metal Matrix Composites by high-pressure torsion

    Sabirov, I., Kolednik, O. & Pippan, R., 2005, In: Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science. 36A, p. 2861-2870

    Research output: Contribution to journal › Article › Research › peer-review

  73. 2003
  74. Published

    Modeling of marangoni-induced droplet motion and melt convection during solidification of hypermonotectic alloys

    Wu, M., Ludwig, A. & Ratke, L., 1 Jan 2003, In: Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science. 34, 12, p. 3009-3019 11 p.

    Research output: Contribution to journal › Article › Research › peer-review

  75. Published

    Simulation of time-dependent pool shape during laser spot welding: Transient effects

    Ehlen, G., Ludwig, A. & Sahm, P. R., 1 Jan 2003, In: Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science. 34, 12, p. 2947-2961 15 p.

    Research output: Contribution to journal › Article › Research › peer-review

  76. Published

    Modeling of Marangoni induced droplet motion and convection during solidification of hypermonotectic alloys

    Wu, M., Ludwig, A. & Ratke, L., 2003, In: Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science. 34, p. 3009-3019

    Research output: Contribution to journal › Article › Research › peer-review

  77. Published

    Time Dependent Simulation of Pool Shape during Laser Spot Welding

    Ludwig, A., Sahm, P. & Ehlen, G., 2003, In: Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science. p. 2947-2961

    Research output: Contribution to journal › Article › Research › peer-review

  78. 2002
  79. Published

    Modeling of Globular Equiaxed Solidification with a Two-Phase Approach

    Ludwig, A. & Wu, M., 2002, In: Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science. p. 3673-3683

    Research output: Contribution to journal › Article › Research › peer-review

View graph of relations