Influence of high pressure torsion on microstructure evolution and mechanical properties of AZ80/SiC magnesium matrix composites

Akbaripanah, F., Sabbaghian, M., Fakhar, N., Minárik, P., Veselý, J., Hung, P. T., Kapoor, G., Renk, O., Máthis, K., Gubicza, J. & Eckert, J., 5 Okt. 2021, in: Materials Science and Engineering A. 826, 141916.

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

Copper and its effects on microstructure and correlated tensile properties of super duplex stainless steels

Ressel, G., Gsellmann, M., Brandl, D., Landefeld, A., Keplinger, A., Zhang, Z., Maier-Kiener, V. & Schnitzer, R., 2021, in: Materials science and engineering: A, Structural materials: properties, microstructure and processing. 2021, 821, S. 1-11

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

Influence of thermomechanical fatigue loading conditions on the nanostructure of secondary hardening steels

Hofinger, M., Seisenbacher, B., Landefeld, A., Ognianov, M., Leitner, H. & Schnitzer, R., 2021, in: Materials science and engineering: A, Structural materials: properties, microstructure and processing. 2021, 802, S. 1-11

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

Microstructure and mechanical properties of partially ferritic Q&P steels

Kickinger, C., Suppan, C., Hebesberger, T., Schnitzer, R. & Hofer, C., 2021, in: Materials science and engineering: A, Structural materials: properties, microstructure and processing. 2021, 815, S. 1-11

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

Mechanism of low temperature deformation in aluminium alloys

Gruber, B., Weißensteiner, I., Kremmer, T., Grabner, F., Falkinger, G., Schökel, A., Spieckermann, F., Schäublin, R., Uggowitzer, P. & Pogatscher, S., 23 Sept. 2020, in: Materials science and engineering: A, Structural materials: properties, microstructure and processing. 795, 795, 11 S., 139935.

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

Balancing the strength and ductility of graphene oxide-carbon nanotube hybrid reinforced aluminum matrix composites with bimodal grain distribution

Xu, Z. Y., Li, C. J., Wang, Z., Fang, D., Gao, P., Tao, J. M., Yi, J. H. & Eckert, J., 20 Aug. 2020, in: Materials Science and Engineering A. 796.2020, 7 October, 7 S., 140067.

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

Environmental hydrogen embrittlement associated with decohesion and void formation at soluble coarse particles in a cold-rolled Al–Cu based alloy

Safyari, M., Moshtaghi, M. & Kuramoto, S., 9 Juli 2020, in: Materials science and engineering: A, Structural materials: properties, microstructure and processing.

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

Evaluation of tensile and low-cycle fatigue properties at elevated temperatures in piston aluminum-silicon alloys with and without nano-clay-particles and heat treatment

Azadi, M., Bahmanabadi, H., Gruen, F. & Winter, G., 11 Mai 2020, in: Materials Science and Engineering A. 788.2020, 24 June, 16 S., 139497.

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

Effect of tempering and deep cryogenic treatment on microstructure and mechanical properties of Cr–Mo–V–Ni steel

Yan, Z., Liu, K. & Eckert, J., 6 Mai 2020, in: Materials Science and Engineering A. 787.2020, 10 June, 8 S., 139520.

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

Transformation-enhanced strength and ductility in a FeCoCrNiMn dual phase high-entropy alloy

Zhang, T., Zhao, R. D., Wu, F. F., Lin, S. B., Jiang, S. S., Huang, Y. J., Chen, S. H. & Eckert, J., 7 Apr. 2020, in: Materials Science and Engineering A. 780.2020, 7 April, 7 S., 139182.

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

Effect of mechanically induced structural rejuvenation on the deformation behaviour of CuZr based bulk metallic glass

Ebner, C., Pauly, S., Eckert, J. & Rentenberger, C., 31 Jan. 2020, in: Materials Science and Engineering A. 773.2020, 31 January, 9 S., 138848.

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

Aluminum matrix composites reinforced with metallic glass particles with core-shell structure

Guan, H. D., Li, C. J., Gao, P., Prashanth, K. G., Tan, J., Eckert, J., Tao, J. M. & Yi, J. H., 13 Jan. 2020, in: Materials Science and Engineering A. 771, 138630.

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

Novel intermetallic-reinforced near-α Ti alloys manufactured by spark plasma sintering

Wimler, D., Lindemann, J., Gammer, C., Spörk-Erdely, P., Stark, A., Clemens, H. & Mayer, S., 2020, in: Materials science and engineering: A, Structural materials: properties, microstructure and processing. 2020, 792, S. 1-11

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

Strain aging characterization and physical modelling of over-aging in dual phase steel

Soliman, M., Shan, Y. V., Mendez Martin, F., Kozeschnik, E. & Palkowski, H., 2020, in: Materials science and engineering: A, Structural materials: properties, microstructure and processing. 2020, S. 1-29

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

Solute clustering and precipitation in an Al–Cu–Mg–Ag–Si model alloy

LI, J., An, Z., Hage, F. S., Wang, H., Xie, P., Jin, S., Ramasse, Q. M. & Sha, G., 8 Juli 2019, in: Materials science and engineering: A, Structural materials: properties, microstructure and processing. 760.2019, July, S. 366-376 11 S.

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

On the mean stress sensitivity of cast aluminium considering imperfections

Aigner, R., Leitner, M. & Stoschka, M., 5 Juni 2019, in: Materials science and engineering: A, Structural materials: properties, microstructure and processing. 758.2019, June, S. 172-184 13 S.

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

Controlling the distribution of structural heterogeneities in severely deformed metallic glass

Bian, X. L., Zhao, D., Kim, J. T., Sopu, D., Wang, G., Pippan, R. & Eckert, J., 2 März 2019, in: Materials Science and Engineering A. 752.2019, 3 April, S. 36-42 7 S.

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

A probabilistic Kitagawa-Takahashi diagram for fatigue strength assessment of cast aluminium alloys

Aigner, R., Pusterhofer, S., Pomberger, S., Leitner, M. & Stoschka, M., 4 Feb. 2019, in: Materials science and engineering: A, Structural materials: properties, microstructure and processing. 745.2019, February, S. 326-334 9 S.

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

Effect of heat treatments on microstructure and properties of CuCrZr produced by laser-powder bed fusion

Wallis, C. & Buchmayr, B., 28 Jan. 2019, in: Materials science and engineering: A, Structural materials: properties, microstructure and processing. 744.2019, January, S. 215-223 9 S.

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

Tailoring bimodal grain size structures in nanocrystalline compositionally complex alloys to improve ductility

Schuh, B., Pippan, R. & Hohenwarter, A., 25 Jan. 2019, in: Materials Science and Engineering A. 748.2019, 4 March, S. 379-385 7 S.

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

Microstructure, texture evolution and tensile properties of extruded Mg-4.58Zn-2.6Gd-0.16Zr alloy

Xiao, L., Yang, G., Chen, J., Luo, S. F., Li, J. & Jie, W., 2019, in: Materials science and engineering: A, Structural materials: properties, microstructure and processing. 744.2019, January, S. 277-289 13 S.

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

Residual stress and microstructure evolution in steel tubes for different cooling conditions – Simulation and verification

Brunbauer, S., Winter, G., Antretter, T., Staron, P. & Ecker, W., 2019, in: Materials science and engineering: A, Structural materials: properties, microstructure and processing. 747, S. 73-79

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

Solute clustering and precipitation in an Al-Cu-Mg-Ag-Si model alloy

LI, J., An, Z. H., Hage, F. S., Wang, H. Y., Xie, P., Jin, S. B., Ramasse, Q. & Sha, G., 2019, in: Materials science and engineering: A, Structural materials: properties, microstructure and processing. 760, S. 366-376

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

Phase formation, microstructure and deformation behavior of heavily alloyed TiNb- and TiV-based titanium alloys

Okulov, I. V., Bönisch, M., Okulov, A. V., Volegov, A. S., Attar, H., Ehtemam-Haghighi, S., Calin, M., Wang, Z., Hohenwarter, A., Kaban, I., Prashanth, K. G. & Eckert, J., 22 Aug. 2018, in: Materials science and engineering: A, Structural materials: properties, microstructure and processing. 733, S. 80-86 7 S.

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

In-situ observations of the fracture and adhesion of Cu/Nb multilayers on polyimide substrates

Cordill, M., Kleinbichler, A., Völker, B., Kraker, P., Economy, D. R., Többens, D. M., Kirchlechner, C. & Kennedy, M. S., 14 Aug. 2018, (Elektronische Veröffentlichung vor Drucklegung.) in: Materials science and engineering: A, Structural materials: properties, microstructure and processing. 735.2018, 26 September, S. 456-462 7 S.

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

Cooperative deformation behavior between the shear band and boundary sliding of an Al-based nanostructure-dendrite composite

Kim, J. T., Hong, S. H., Kim, Y. S., Park, H. J., Maity, T., Chawake, N., Bian, X. L., Sarac, B., Park, J. M., Prashanth, K. G., Park, J. Y., Eckert, J. & Kim, K. B., 11 Aug. 2018, in: Materials science and engineering: A, Structural materials: properties, microstructure and processing. 735.2018, 26 September, S. 81-88 8 S.

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

Microstructure and strength of nano-/ultrafine-grained carbon nanotube-reinforced titanium composites processed by high-pressure torsion

Li, F. X., Hao, P. D., Yi, J. H., Chen, Z., Prashanth, K. G., Maity, T. & Eckert, J., 11 Apr. 2018, in: Materials science and engineering: A, Structural materials: properties, microstructure and processing. 722, S. 122-128 7 S.

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

Microstructure and mechanical properties of a heat-treatable Al-3.5Cu-1.5Mg-1Si alloy produced by selective laser melting

Wang, P., Gammer, C., Brenne, F., Prashanth, K. G., Mendes, R. G., Rümmeli, M. H., Gemming, T., Eckert, J. & Scudino, S., 10 Jan. 2018, in: Materials science and engineering: A, Structural materials: properties, microstructure and processing. 711.2018, January, S. 562-570 9 S.

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

Enhanced mechanical properties of Al₂O₃-C refractories with silicon hybridized expanded graphite

Wang, Q., Li, Y., Jin, S., Sang, S., Xu, Y., Xu, X. & Wang, G., 2 Jan. 2018, in: Materials science and engineering: A, Structural materials: properties, microstructure and processing. 709, S. 160-171 12 S.

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

Microstructure and mechanical properties of a low C steel subjected to bainitic of quenching and partitioning heat treatments

Ebner, S., Suppan, H., Schnitzer, R. & Hofer, C., 2018, in: Materials science and engineering: A, Structural materials: properties, microstructure and processing. S. 1-9

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

Microstructure and mechanical properties of foundry Al-Si-Cu-Hf alloy

Xing, Y., Jia, Z., LI, J., Ding, L., Huang, H. & Liu, Q., 2018, in: Materials science and engineering: A, Structural materials: properties, microstructure and processing. 722.2018, April, S. 197-205 9 S.

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

Precipitate strengthening and thermal stability in three component metallic nanolaminate thin films

Schoeppner, R., Taylor, A. A., Cordill, M., Zbib, H. M., Michler, J. & Bahr, D. F., 2018, in: Materials science and engineering: A, Structural materials: properties, microstructure and processing. 712, S. 485-492

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

Corrigendum to “Structural modifications in sub-Tg annealed CuZr-based metallic glass”

Sarac, B., Bernasconi, A., Wright, J., Stoica, M., Spieckermann, F., Mühlbacher, M., Keckes, J., Bian, X. L., Wang, G. & Eckert, J., Dez. 2017, in: Materials science and engineering: A, Structural materials: properties, microstructure and processing.

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

Microporosity and statistical size effect on the fatigue strength of cast aluminium alloys EN AC-45500 and 46200

Leitner, M., Garb, C., Remes, H. & Stoschka, M., 7 Nov. 2017, in: Materials science and engineering: A, Structural materials: properties, microstructure and processing. 707, S. 567-575 9 S.

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

Structural modifications in sub-T_g annealed CuZr-based metallic glass

Sarac, B., Bernasconi, A., Wright, J., Stoica, M., Spieckermann, F., Mühlbacher, M., Keckes, J., Bian, X., Wang, G. & Eckert, J., 7 Nov. 2017, in: Materials science and engineering: A, Structural materials: properties, microstructure and processing. 707, S. 245-252 8 S.

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

Influence of severe plastic deformation and specimen orientation on the fatigue crack propagation behavior of a pearlitic steel

Leitner, T., Trummer, G., Pippan, R. & Hohenwarter, A., 13 Okt. 2017, (Elektronische Veröffentlichung vor Drucklegung.) in: Materials science and engineering: A, Structural materials: properties, microstructure and processing. 710.2018, 5 January, S. 260-270 11 S.

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

Impact of severe plastic deformation on microstructure and fracture toughness evolution of a duplex-steel

Schwarz, K. T., Kormout, K. S., Pippan, R. & Hohenwarter, A., 4 Aug. 2017, in: Materials science and engineering: A, Structural materials: properties, microstructure and processing. 703, S. 173-179 7 S.

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

Friction welding of selective laser melted Ti6Al4V parts

Prashanth, K. G., Damodaram, R., Maity, T., Wang, P. & Eckert, J., 3 Aug. 2017, (Elektronische Veröffentlichung vor Drucklegung.) in: Materials science and engineering: A, Structural materials: properties, microstructure and processing. 704.2017, September, S. 66-71 6 S.

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

Reduced brittleness of multi-walled carbon nanotubes (MWCNTs) containing Al₂O₃-C refractories with boron carbide

Liao, N., Li, Y., Jin, S., Sang, S. & Liu, G., 20 Juni 2017, in: Materials science and engineering: A, Structural materials: properties, microstructure and processing. 698, S. 80-87 8 S.

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

Nanoindentation and wear properties of Ti and Ti-TiB composite materials produced by selective laser melting

Attar, H., Ehtemam-Haghighi, S., Kent, D., Okulov, I. V., Wendrock, H., Bönisch, M., Volegov, A. S., Calin, M., Eckert, J. & Dargusch, M. S., März 2017, in: Materials science and engineering: A, Structural materials: properties, microstructure and processing. 688, S. 20-26

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

The influence of microstructure on the cyclic deformation and damage of copper and an oxide dispersion strengthened steel studied via in-situ micro-beam bending

Howard, C., Fritz, R., Alfreider, M., Kiener, D. & Hosemann, P., 27 Feb. 2017, in: Materials science and engineering: A, Structural materials: properties, microstructure and processing. 687, S. 313-322

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

Micro-to-nano-scale deformation mechanism of a Ti-based dendritic-ultrafine eutectic alloy exhibiting large tensile ductility

Okulov, I. V., Bönisch, M., Volegov, A. S., Shahabi, H. S., Wendrock, H., Gemming, T. & Eckert, J., 13 Jan. 2017, in: Materials science and engineering: A, Structural materials: properties, microstructure and processing. 682, S. 673-678 6 S.

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

Compressed Bi-crystal Micropillars Showing a Sigmoidal Deformation State - A Computational Study

Toth, F., Kirchlechner, C., Fischer, F. D., Dehm, G. & Rammerstorfer, F. G., 2017, in: Materials science and engineering: A, Structural materials: properties, microstructure and processing. 700, S. 168-174

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

Creep properties and creep microstructure evolution of Mg-2.49Nd-1.82Gd-0.19Zn-0.4Zr alloy

Han, W., Yang, G., Xiao, L., LI, J. & Jie, W., 2017, in: Materials science and engineering: A, Structural materials: properties, microstructure and processing. 684, S. 90-100

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

Internal friction and atomic relaxation processes in an intermetallic Mo-rich Ti-44Al-7Mo (γ+βo) model alloy

Usategui, L., No, M. L., Mayer, S., Clemens, H. & Juan, J. S., 2017, in: Materials science and engineering: A, Structural materials: properties, microstructure and processing. 700, S. 495-502

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

Microstructure and mechanical properties of foundry Al-Si-Cu-Hf alloy

Xing, Y., Jia, Z., LI, J., Ding, L., Huang, H. & Liu, Q., 2017, in: Materials Science and Engineering A. 684, S. 90-100

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

The effect of residual stresses and strain reversal on the fracture toughness of TiAl alloys

Appel, F., Paul, J., Staron, P., Kolednik, O., Predan, J., Oehring, M. & Fischer, F.-D., 2017, in: Materials science and engineering: A, Structural materials: properties, microstructure and processing. 709, S. 17-29

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

Effect of reverted austenite on tensile and impact strength in a martensitic stainless steel−An in-situ X-ray diffraction study

Wießner, M., Gamsjäger, E., van der Zwaag, S. & Angerer, P., 11 Nov. 2016, in: Materials science and engineering: A, Structural materials: properties, microstructure and processing. 682, S. 117-125 9 S.

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

Effect of cerium addition on microstructure and mechanical properties of high-strength Fe85Cr4Mo8V2C1 cast steel

Hufenbach, J., Helth, A., Lee, M. H., Wendrock, H., Giebeler, L., Choe, C. Y., Kim, K. H., Kühn, U., Kim, T. S. & Eckert, J., 30 Sept. 2016, in: Materials science and engineering: A, Structural materials: properties, microstructure and processing. 674, S. 366-374 9 S.

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

Interplay between sample size and grain size: Single crystalline vs. ultrafine-grained chromium micropillars

Fritz, R., Maier-Kiener, V., Lutz, D. & Kiener, D., 30 Sept. 2016, in: Materials science and engineering: A, Structural materials: properties, microstructure and processing. 674, S. 626-633

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

Influence of Ag and Co additions on glass-forming ability, thermal and mechanical properties of Cu–Zr–Al bulk metallic glasses

Escher, B., Kühn, U., Eckert, J., Rentenberger, C. & Pauly, S., 15 Sept. 2016, in: Materials science and engineering: A, Structural materials: properties, microstructure and processing. 673, S. 90-98 9 S.

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

Laser surface remelting of a Cu-Al-Ni-Mn shape memory alloy

da Silva, M. R., Gargarella, P., Gustmann, T., Botta Filho, W. J., Kiminami, C. S., Eckert, J., Pauly, S. & Bolfarini, C., 20 Apr. 2016, in: Materials science and engineering: A, Structural materials: properties, microstructure and processing. 661, S. 61-67 7 S.

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

Deformation and fracture characteristics of ultrafine-grained vanadium

Hohenwarter, A. & Wurster, S., 2016, in: Materials science and engineering: A, Structural materials: properties, microstructure and processing. 650, S. 492-496 5 S.

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

Impact of the B2 ordering behavior on the mechanical properties of a Fe Co Mo alloy

Turk, C., Leitner, H., Kellezi, G., Clemens, H., Gan, W., Staron, P. & Primig, S., 2016, in: Materials science and engineering: A, Structural materials: properties, microstructure and processing. 662, S. 511-518 8 S., 662.

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

Interplay between sample size and grain size: Singlec rystalline vs. ultrafine-grained chromium micropillars

Fritz, R., Maier-Kiener, V., Lutz, D. & Kiener, D., 2016, in: Materials science and engineering: A, Structural materials: properties, microstructure and processing. 674, S. 626-633 8 S.

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

Microstructure Evolution and Mechanical Properties of directionally solidified Mg-xGd (x¼0.8, 1.5,and2.5)alloys

Luo, S., Yang, G., Liu, S., Wang, J., Li, J. & Jie, W., 2016, in: Materials science and engineering: A, Structural materials: properties, microstructure and processing. 662, S. 241-250 10 S.

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

Morphology change of retained austenite during austempering of carbide-freebainiticsteel

Hofer, C., Winkelhofer, F., Clemens, H. & Primig, S., 2016, in: Materials science and engineering: A, Structural materials: properties, microstructure and processing. 664, S. 236-246 11 S.

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

Relationship between mechanical damage and electrical degradation in polymer supported metal films subjected to cyclic loading

Glushko, O., Klug, A., List-Kratochvil, E. J. W. & Cordill, M., 2016, in: Materials science and engineering: A, Structural materials: properties, microstructure and processing.

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

Designed heterogeneities improve the fracture reliability of a Zr-based bulk metallic glass

Li, B. S., Shakur Shahabi, H., Scudino, S., Eckert, J. & Kruzic, J. J., 14 Okt. 2015, in: Materials science and engineering: A, Structural materials: properties, microstructure and processing. 646, S. 242-248 7 S.

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

Revisiting fatigue crack growth in various grain size regimes of Ni

Leitner, T., Hohenwarter, A. & Pippan, R., 14 Okt. 2015, in: Materials science and engineering: A, Structural materials: properties, microstructure and processing. 646, S. 294-305 12 S., 32705.

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

Characterization of the high temperature deformatin behavior of two intermetallic TiAl-Mo alloys

Godor, F., Werner, R., Lindemann, J., Clemens, H. & Mayer, S., 2015, in: Materials science and engineering: A, Structural materials: properties, microstructure and processing. 648, S. 208-216

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

Elevated temperature mechanical properties of novel ultra-fine grained Cu-Nb composites

Primorac, M.-M., Abad, M. D., Hosemann, P., Kreuzeder, M., Maier, V. & Kiener, D., 2015, in: Materials science and engineering: A, Structural materials: properties, microstructure and processing. 625, S. 296-302

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

Incremental high pressure torsion as a novel severe plastic deformation process: Processing features and application to copper

Hohenwarter, A., 2015, in: Materials science and engineering: A, Structural materials: properties, microstructure and processing. 626, S. 80-85

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

Yield strength prediction in Ni-base alloy 718Plus based on thermo-kinetic precipitation simulation

Ahmadi, M. R., Povoden-Karadeniz, E., Whitmore, L., Stockinger, M., Falahati, A. & Kozeschnik, E., 1 Juli 2014, in: Materials Science and Engineering A. 608, S. 114-122 9 S.

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

Comparison of microstructural crack paths between hypo-eutectic Al-Si-Cu and Al-Si-Mg cast alloys in high plasticity regimes under rotating bending

Huter, P., Winter, G., Renhart, P., Schwab, M., Oberfrank, S., Grün, F. & Stauder, B., 2014, in: Materials science and engineering: A, Structural materials: properties, microstructure and processing. 618, S. 578-585

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

Hot-working behavior of an advanced intermetallic multi-phase gamma-TiAl based alloy

Schwaighofer, E., Clemens, H., Lindemann, J., Stark, A. & Mayer, S., 2014, in: Materials science and engineering: A, Structural materials: properties, microstructure and processing. 614, S. 297-310

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

Microstructural investigation of thermally aged nickel-based superalloy 718Plus

Whitmore, L., Ahmadi, M. R., Stockinger, M., Povoden-Karadeniz, E., Kozeschnik, E. & Leitner, H., 2014, in: Materials science and engineering: A, Structural materials: properties, microstructure and processing. 594, S. 253-259

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

The microstructure of heat-treated nickel-based superalloy 718Plus

Whitmore, L., Ahmadi, M. R., Guetaz, L., Leitner, H., Povoden-Karadeniz, E., Stockinger, M. & Kozeschnik, E., 2014, in: Materials science and engineering: A, Structural materials: properties, microstructure and processing. 610, S. 39-45

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

The influence of microstructure and operating temperature on the fatigue endurance of hot forged Inconel (R) 718 components

Maderbacher, H., Oberwinkler, B., Gänser, H.-P., Tan, W., Rollett, M. & Stoschka, M., 15 Nov. 2013, in: Materials science and engineering: A, Structural materials: properties, microstructure and processing. 585, S. 123-131

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

Activation Parameters for Deformation of Ultrafine-Grained Aluminium as Determined by Indentation Strain Rate Jumps at Elevated Temperature

Wheeler, J. M., Maier, V., Durst, K., Göken, M. & Michler, J., 2013, in: Materials science and engineering: A, Structural materials: properties, microstructure and processing. 585, S. 108-113

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

Direct or indirect: Influence of type of retained austenite decomposition during tempering on the toughness of a hot-work tool steel

Lerchbacher, C., Zinner, S. & Leitner, H., 2013, in: Materials science and engineering: A, Structural materials: properties, microstructure and processing. 564, S. 163-168

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

Influence of bulk pre-straining on the size effect in nickel compression pillars

Schneider, A. S., Kiener, D., Yakacki, C. M., Maier, H. J., Gruber, P. A., Tamura, N., Kunz, M., Minor, A. M. & Frick, C. P., 2013, in: Materials science and engineering: A, Structural materials: properties, microstructure and processing. 559, S. 147-158 12 S.

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

Influence of grain shape and orientation on the mechanical properties of high pressure deformed nickel

Rathmayr, G. B., Hohenwarter, A. & Pippan, R., 2013, in: Materials science and engineering: A, Structural materials: properties, microstructure and processing. 560, S. 224-231

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

Influence of morphology and structural size on the fracture behavior of a nanostructured pearlitic steel

Kammerhofer, C., Hohenwarter, A., Scheriau, S., Brantner, H. P. & Pippan, R., 2013, in: Materials science and engineering: A, Structural materials: properties, microstructure and processing. 585, S. 190-196

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

Solid solution hardening of molybdenum-hafnium alloys: Experiments and Modeling

Pöhl, C., Schatte, J. & Leitner, H., 2013, in: Materials science and engineering: A, Structural materials: properties, microstructure and processing. 559, S. 643-650

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

The effect of main alloying elements on the physical properties of Al–Si foundry alloys

Stadler, F., Antrekowitsch, H., Fragner, W., Kaufmann, H., Pinatel, E. & Uggowitzer, P. J., 2013, in: Materials science and engineering: A, Structural materials: properties, microstructure and processing. S. 1-1

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

The influence of microstructure and operating temperature on the fatigue endurance of hot forged Inconel® 718 components

Maderbacher, H., Oberwinkler, B., Gänser, H.-P., Tan, W., Rollett, M. & Stoschka, M., 2013, in: Materials science and engineering: A, Structural materials: properties, microstructure and processing. Volume 585, S. 123-131

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

In situ formation of carbon nanotubes and ceramic whiskers in Al2O3-C refractories with addition of Ni-catalyzed phenolic resin

Luo, M., Li, Y., Sang, S., Zhao, L., Jin, S. & Li, Y., 15 Dez. 2012, in: Materials science and engineering: A, Structural materials: properties, microstructure and processing. 558, S. 533-542

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

Microstructures and mechanical properties of Al2O3-C refractories with addition of multi-walled carbon nanotubes

Luo, M., Li, Y., Jin, S., Sang, S., Zhao, L. & Li, Y., 30 Juni 2012, in: Materials science and engineering: A, Structural materials: properties, microstructure and processing. 548, S. 134-141

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

A comprehensive study on the damage tolerance of ultrafine-grained copper

Hohenwarter, A. & Pippan, R., 2012, in: Materials science and engineering: A, Structural materials: properties, microstructure and processing. 540, S. 89-96

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

Influence of the heating rate on the recrystallization behavior of molybdenum

Primig, S., Leitner, H., Knabl, W., Lorich, A., Clemens, H. & Stickler, R., 2012, in: Materials science and engineering: A, Structural materials: properties, microstructure and processing. 535, S. 316-324

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

Precipitation microstructure and age-hardening response of an Mg-Gd-Nd-Zn-Zr alloy

Li, J., Sha, G., Wang, T., Jie, W. & Ringer, S., 2012, in: Materials science and engineering: A, Structural materials: properties, microstructure and processing. 534, S. 1-6

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

Precipitation microstructure and their strengthening effects of an Mg-2.8Nd-0.6Zn-0.4Zr alloy with a 0.2 wt. % Y addition

Li, J., Sha, G., Jie, W. & Ringer, S., 2012, in: Materials science and engineering: A, Structural materials: properties, microstructure and processing. 538, S. 272-280

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

Simulation of distortion and residual stress in high pressure die casting - modelling and experiments

Hofer, P., Kaschnitz, E. & Schumacher, P., 2012, in: Materials science and engineering: A, Structural materials: properties, microstructure and processing. 33, S. 1-8

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

Transmission electron microscopy of single and double aged 718plus superalloy

Whitmore, L., Leitner, H., Povoden-Karadeniz, E., Radis, R. & Stockinger, M., 2012, in: Materials science and engineering: A, Structural materials: properties, microstructure and processing. 534, S. 413-423

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

Study of the hot deformation behaviour in Ti-5Al-5Mo-5V-3Cr-1Zr

Warchomicka, F., Poletti, C. & Stockinger, M., 25 Okt. 2011, in: Materials Science and Engineering A. 528, 28, S. 8277-8285 9 S.

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

Assessment of dynamic softening mechanisms in Allvac^® 718Plus™ by EBSD analysis

Mitsche, S., Sommitsch, C., Huber, D., Stockinger, M. & Poelt, P., 25 Apr. 2011, in: Materials Science and Engineering A. 528, 10-11, S. 3754-3760 7 S.

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

Deformation mechanisms of a modified 316L austenitic steel subjected to high pressure torsion

Scheriau, S., Zhang, Z., Kleber, S. & Pippan, R., 2011, in: Materials science and engineering: A, Structural materials: properties, microstructure and processing. S. 2776-2786

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

Effect of oxide particles on the stabilization and final microstructure in aluminium

Bachmaier, A. & Pippan, R., 2011, in: Materials science and engineering: A, Structural materials: properties, microstructure and processing. S. 7589-7595

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

Modeling the fatigue crack growth behavior of Ti-6Al-4V by considering grain size and stress ratio

Oberwinkler, B., 2011, in: Materials science and engineering: A, Structural materials: properties, microstructure and processing. 528, S. 5983-5992

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

Significance of temperature increase in processing by high-pressure torsion

Edalati, K., Miresmaeili, R., Horita, Z., Kanayama, H. & Pippan, R., 2011, in: Materials science and engineering: A, Structural materials: properties, microstructure and processing. S. 7301-7305

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

Anisotropic fracture behavior of ultrafine-grained iron

Hohenwarter, A. & Pippan, R., 2010, in: Materials science and engineering: A, Structural materials: properties, microstructure and processing. 527, S. 2649-2656

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

Hardening and microstructure reactions in high-temperature Equal-Channel Angular Pressed Mg-Nd-Gd-Zn-Zr alloy

Li, J., Sha, G., Xu, W., Xia, K., Jie, W. & Simon, R., 2010, in: Materials science and engineering: A, Structural materials: properties, microstructure and processing. 527, S. 5092-5099

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

Influence of reverted austenite on static and dynamic mechanical properties of a PH 13-8 Mo maraging steel

Schnitzer, R., Zickler, G., Erhardt, L., Clemens, H., Zinner, S., Thomas, L. & Leitner, H., 2010, in: Materials science and engineering: A, Structural materials: properties, microstructure and processing. 527, S. 2065-2070

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

Investigation of the fatigue behavior of Al thin films with different microstructure

Dehm, G., Heinz, W. & Pippan, R., 2010, in: Materials science and engineering: A, Structural materials: properties, microstructure and processing. S. 7757-7763

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

Local and global measures of the fracture toughness of metal matrix composites

Kolednik, O. & Sabirov, I., 2010, in: Materials science and engineering: A, Structural materials: properties, microstructure and processing. S. 3100-3110

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

Transformation from continuous-to-isothermal aging applied on a maraging steel

Primig, S. & Leitner, H., 2010, in: Materials science and engineering: A, Structural materials: properties, microstructure and processing. 527, S. 4399-4405

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

Micro-compression testing: A critical discussion of experimental constraints

Kiener, D., Motz, C. & Dehm, G., 2009, in: Materials science and engineering: A, Structural materials: properties, microstructure and processing. A505, S. 79-87

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

Microstructure and mechanical properties of the superalloy ATI Allvac 718PlusTM

Zickler, G., Schnitzer, R., Radis, R., Hochfellner, R., Schweins, R., Stockinger, M. & Leitner, H., 2009, in: Materials science and engineering: A, Structural materials: properties, microstructure and processing. S. 295-303

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

Modeling fatigue crack growth in a bimaterial specimen with the configurational forces concept

Kolednik, O., Predan, J., Gubeljak, N. & Fischer, F. D., 2009, in: Materials science and engineering: A, Structural materials: properties, microstructure and processing. 519, S. 172-183

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)